- 25 May, 2018 13 commits
-
-
Borislav Petkov authored
Function bodies are very similar and are going to grow more almost identical code. Add a bool arg to determine whether SPEC_CTRL is being set for the guest or restored to the host. No functional changes. Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CVE-2018-3639 (x86) (backported from commit cc69b349) [smb: context adjusted in bugs.c] Signed-off-by:
Stefan Bader <stefan.bader@canonical.com>
-
Thomas Gleixner authored
The upcoming support for the virtual SPEC_CTRL MSR on AMD needs to reuse speculative_store_bypass_update() to avoid code duplication. Add an argument for supplying a thread info (TIF) value and create a wrapper speculative_store_bypass_update_current() which is used at the existing call site. Signed-off-by:
-
Tom Lendacky authored
Some AMD processors only support a non-architectural means of enabling speculative store bypass disable (SSBD). To allow a simplified view of this to a guest, an architectural definition has been created through a new CPUID bit, 0x80000008_EBX[25], and a new MSR, 0xc001011f. With this, a hypervisor can virtualize the existence of this definition and provide an architectural method for using SSBD to a guest. Add the new CPUID feature, the new MSR and update the existing SSBD support to use this MSR when present. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Thomas Gleixner authored
AMD is proposing a VIRT_SPEC_CTRL MSR to handle the Speculative Store Bypass Disable via MSR_AMD64_LS_CFG so that guests do not have to care about the bit position of the SSBD bit and thus facilitate migration. Also, the sibling coordination on Family 17H CPUs can only be done on the host. Extend x86_spec_ctrl_set_guest() and x86_spec_ctrl_restore_host() with an extra argument for the VIRT_SPEC_CTRL MSR. Hand in 0 from VMX and in SVM add a new virt_spec_ctrl member to the CPU data structure which is going to be used in later patches for the actual implementation. Signed-off-by:
-
Thomas Gleixner authored
The AMD64_LS_CFG MSR is a per core MSR on Family 17H CPUs. That means when hyperthreading is enabled the SSBD bit toggle needs to take both cores into account. Otherwise the following situation can happen: CPU0 CPU1 disable SSB disable SSB enable SSB <- Enables it for the Core, i.e. for CPU0 as well So after the SSB enable on CPU1 the task on CPU0 runs with SSB enabled again. On Intel the SSBD control is per core as well, but the synchronization logic is implemented behind the per thread SPEC_CTRL MSR. It works like this: CORE_SPEC_CTRL = THREAD0_SPEC_CTRL | THREAD1_SPEC_CTRL i.e. if one of the threads enables a mitigation then this affects both and the mitigation is only disabled in the core when both threads disabled it. Add the necessary synchronization logic for AMD family 17H. Unfortunately that requires a spinlock to serialize the access to the MSR, but the locks are only shared between siblings. Signed-off-by:
-
Thomas Gleixner authored
Add a ZEN feature bit so family-dependent static_cpu_has() optimizations can be built for ZEN. Signed-off-by:
-
Borislav Petkov authored
CPUID Fn8000_0007_EDX[CPB] is wrongly 0 on models up to B1. But they do support CPB (AMD's Core Performance Boosting cpufreq CPU feature), so fix that. Signed-off-by:
Ingo Molnar <mingo@kernel.org> CVE-2018-3639 (x86) (backported from commit f7f3dc00) Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> [smb: no zen specific init function] Signed-off-by:
-
Thomas Gleixner authored
The SSBD enumeration is similarly to the other bits magically shared between Intel and AMD though the mechanisms are different. Make X86_FEATURE_SSBD synthetic and set it depending on the vendor specific features or family dependent setup. Change the Intel bit to X86_FEATURE_SPEC_CTRL_SSBD to denote that SSBD is controlled via MSR_SPEC_CTRL and fix up the usage sites. Signed-off-by:
-
Thomas Gleixner authored
The availability of the SPEC_CTRL MSR is enumerated by a CPUID bit on Intel and implied by IBRS or STIBP support on AMD. That's just confusing and in case an AMD CPU has IBRS not supported because the underlying problem has been fixed but has another bit valid in the SPEC_CTRL MSR, the thing falls apart. Add a synthetic feature bit X86_FEATURE_MSR_SPEC_CTRL to denote the availability on both Intel and AMD. While at it replace the boot_cpu_has() checks with static_cpu_has() where possible. This prevents late microcode loading from exposing SPEC_CTRL, but late loading is already very limited as it does not reevaluate the mitigation options and other bits and pieces. Having static_cpu_has() is the simplest and least fragile solution. Signed-off-by:
-
Borislav Petkov authored
Intel and AMD have different CPUID bits hence for those use synthetic bits which get set on the respective vendor's in init_speculation_control(). So that debacles like what the commit message of c65732e4 ("x86/cpu: Restore CPUID_8000_0008_EBX reload") talks about don't happen anymore. Signed-off-by:
Jörg Otte <jrg.otte@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/20180504161815.GG9257@pd.tnic CVE-2018-3639 (x86) (backported from commit e7c587da) [smb: dropped guest_cpuid_has checks in svm.c and vmx.c] Signed-off-by:
-
Thomas Gleixner authored
svm_vcpu_run() invokes x86_spec_ctrl_restore_host() after VMEXIT, but before the host GS is restored. x86_spec_ctrl_restore_host() uses 'current' to determine the host SSBD state of the thread. 'current' is GS based, but host GS is not yet restored and the access causes a triple fault. Move the call after the host GS restore. Fixes: 885f82bf x86/process: Allow runtime control of Speculative Store Bypass Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> CVE-2018-3639 (x86) (backported from commit 15e6c22f) [smb: context adapted] Signed-off-by:
-
Konrad Rzeszutek Wilk authored
Fixes: 7bb4d366 ("x86/bugs: Make cpu_show_common() static") Fixes: 24f7fc83 ("x86/bugs: Provide boot parameters for the spec_store_bypass_disable mitigation") Signed-off-by:
-
Jim Mattson authored
Cast val and (val >> 32) to (u32), so that they fit in a general-purpose register in both 32-bit and 64-bit code. [ tglx: Made it u32 instead of uintptr_t ] Fixes: c65732e4 ("x86/cpu: Restore CPUID_8000_0008_EBX reload") Signed-off-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
-
- 23 May, 2018 27 commits
-
-
Ville Syrjälä authored
BugLink: http://bugs.launchpad.net/bugs/1770565 Turns out commit a0562819 ("drm/i915: Get panel_type from OpRegion panel details") has regressed quite a few machines. So it looks like we can't use the panel type from OpRegion on all systems, and yet we absolutely must use it on some specific systems. Despite trying, I was unable to find any automagic way to determine if the OpRegion panel type is respectable or not. The only glimmer of hope I had was bit 8 in the SCIC response, but that turned out to not work either (it was always 0 on both types of systems). So, to fix the regressions without breaking the machine we know to need the OpRegion panel type, let's just add a quirk for this. Only specific machines known to require the OpRegion panel type will therefore use it. Everyone else will fall bck to the VBT panel type. The only known machine so far is a "Conrac GmbH IX45GM2". The PCI subsystem ID on this machine is just a generic 8086:2a42, so of no use. Instead we'll go with a DMI match. I suspect we can now also revert commit aeddda06 ("drm/i915: Ignore panel type from OpRegion on SKL") but let's leave that to a separate patch. v2: Do the DMI match in the opregion code directly, as dev_priv->quirks gets populated too late Cc: Rob Kramer <rob@solution-space.com> Cc: Martin van Es <martin@mrvanes.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Marco Krüger <krgsch@gmail.com> Cc: Sean Greenslade <sean@seangreenslade.com> Cc: Trudy Tective <bertslany@gmail.com> Cc: Robin Müller <rm1990@gmx.de> Cc: Alexander Kobel <a-kobel@a-kobel.de> Cc: Alexey Shumitsky <alexey.shumitsky@gmail.com> Cc: Emil Andersen Lauridsen <mine809@gmail.com> Cc: oceans112@gmail.com Cc: James Hogan <james@albanarts.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: stable@vger.kernel.org References: https://lists.freedesktop.org/archives/intel-gfx/2016-August/105545.html References: https://lists.freedesktop.org/archives/dri-devel/2016-August/116888.html References: https://lists.freedesktop.org/archives/intel-gfx/2016-June/098826.html Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94825 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97060 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97443 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97363 Fixes: a0562819 ("drm/i915: Get panel_type from OpRegion panel details") Tested-by:
Marco Krüger <krgsch@gmail.com> Tested-by:
Alexey Shumitsky <alexey.shumitsky@gmail.com> Tested-by:
Sean Greenslade <sean@seangreenslade.com> Tested-by:
Emil Andersen Lauridsen <mine809@gmail.com> Tested-by:
Robin Müller <rm1990@gmx.de> Tested-by: oceans112@gmail.com Tested-by:
Rob Kramer <rob@solution-space.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473758539-21565-1-git-send-email-ville.syrjala@linux.intel.com References: http://patchwork.freedesktop.org/patch/msgid/1473602239-15855-1-git-send-email-adrienverge@gmail.comAcked-by:
Jani Nikula <jani.nikula@intel.com> (cherry picked from commit c8ebfad7) Signed-off-by:
Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
-
Rodrigo Vivi authored
BugLink: http://bugs.launchpad.net/bugs/1770565 According to spec: "KBL re-uses SKL values, except where specific KBL values are listed." And recently spec has changed adding different table for Display Port only. But for all SKUs (H,S,U,Y) we have slightly different values. v2: Fix wrong condition spotted by Jani. v3: Fix 7th entry of KBL H and S table - by Manasi. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476806256-13318-1-git-send-email-rodrigo.vivi@intel.com (cherry picked from commit 0fdd4918) Signed-off-by:
-
Ville Syrjälä authored
BugLink: http://bugs.launchpad.net/bugs/1770565 The spec was recently fixed to have the correct iboost setting for the SKL Y/U DP DDI buffer translation table entry 2. Update our tables to match. Cc: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by:
David Weinehall <david.weinehall@linux.intel.com> (cherry picked from commit 5ac90567) Signed-off-by:
-
Ville Syrjälä authored
BugLink: http://bugs.launchpad.net/bugs/1770565 We no longer have any need to look up the intel_digital_port based on the passed in intel_encoder, but we still want to look up the port. Let's just move that logic into intel_ddi_get_encoder_port() and drop the dig_port stuff. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-9-git-send-email-ville.syrjala@linux.intel.com (backported from commit 5a5d24dc) Signed-off-by:
-
Ville Syrjälä authored
BugLink: http://bugs.launchpad.net/bugs/1770565 Program the 'iboost_bit' based on what the VBT says it should be for the specific port type, rather than assume it's always the same for DP and HDMI. Signed-off-by:
-
Ville Syrjälä authored
BugLink: http://bugs.launchpad.net/bugs/1770565 DDI buffer prorgramming works quite differently depending on the mode of the DDI port (DP/eDP/FDI vs. HDMI/DVI). Let's split the function that does the programming into two matching variants as well. Signed-off-by:
-
Ville Syrjälä authored
BugLink: http://bugs.launchpad.net/bugs/1770565 When the DDI port is in HDMI/DVI mode, it automagically uses the buffer translations values from entry 9. Let's make that explicit in the code. Signed-off-by:
-
Ville Syrjälä authored
BugLink: http://bugs.launchpad.net/bugs/1770565 Now that the SKL iboost programming is done from intel_ddi_pre_enable() for HDMI, let's move the BXT bxt_ddi_vswing_sequence() call there as well. This makes things look more similar to the DP/eDP case which is handled in ddi_signal_levels(). Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> (cherry picked from commit 9f332437) Signed-off-by:
-
Ville Syrjälä authored
BugLink: http://bugs.launchpad.net/bugs/1770565 Currently we fail to program the iboost stuff for HDMI/DVI. Let's remedy that. Cc: stable@vger.kernel.org Fixes: f8896f5d ("drm/i915/skl: Buffer translation improvements") Cc: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
BugLink: http://bugs.launchpad.net/bugs/1770565 Give a proper name for the SKL DDI_BUF_TRANS iboost bit. Cc: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
BugLink: http://bugs.launchpad.net/bugs/1770565 Bspec says: "For DDIA with x4 capability (DDI_BUF_CTL DDIA Lane Capability Control = DDIA x4), the I_boost value has to be programmed in both tx_blnclegsctl_0 and tx_blnclegsctl_4." Currently we only program tx_blnclegsctl_0. Let's do the other one as well. Cc: stable@vger.kernel.org Fixes: f8896f5d ("drm/i915/skl: Buffer translation improvements") Cc: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by:
-
Jeffrey Hugo authored
load_module() creates W+X mappings via __vmalloc_node_range() (from layout_and_allocate()->move_module()->module_alloc()) by using PAGE_KERNEL_EXEC. These mappings are later cleaned up via "call_rcu_sched(&freeinit->rcu, do_free_init)" from do_init_module(). This is a problem because call_rcu_sched() queues work, which can be run after debug_checkwx() is run, resulting in a race condition. If hit, the race results in a nasty splat about insecure W+X mappings, which results in a poor user experience as these are not the mappings that debug_checkwx() is intended to catch. This issue is observed on multiple arm64 platforms, and has been artificially triggered on an x86 platform. Address the race by flushing the queued work before running the arch-defined mark_rodata_ro() which then calls debug_checkwx(). Link: http://lkml.kernel.org/r/1525103946-29526-1-git-send-email-jhugo@codeaurora.org Fixes: e1a58320 ("x86/mm: Warn on W^X mappings") BugLink: https://launchpad.net/bugs/1769696Signed-off-by:
Jeffrey Hugo <jhugo@codeaurora.org> Reported-by:
Timur Tabi <timur@codeaurora.org> Reported-by:
Jan Glauber <jan.glauber@caviumnetworks.com> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Manoj Iyer <manoj.iyer@canonical.com> Acked-by:
-
Heiko Carstens authored
BugLink: http://bugs.launchpad.net/bugs/1761674 Description: kernel: fix rwlock implementation Symptom: Kernel hangs, due to deadlock on an rwlock. Problem: With upstream commit 94232a43 ("s390/rwlock: improve writer fairness") rwlock writer fairness was supposed to be implemented. If a writer tries to take an rwlock it sets unconditionally the writer bit within the lock word and waits until all readers have released the lock. This however can lead to a deadlock since rwlocks can be taken recursively by readers. If e.g. CPU 0 holds the lock as a reader, and CPU 1 wants to write-lock the lock, then CPU 1 sets the writer bit and afterwards busy waits for CPU 0 to release the lock. If now CPU 0 tries to read-lock the lock again (recursively) it will also busy wait until CPU 1 removes the writer bit, which will never happen, since it waits for the first reader on CPU 0 to release the lock. Solution: Revert the rwlock writer fairness semantics again. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by:
-
Michal Kubeček authored
BugLink: http://bugs.launchpad.net/bugs/1766573 Commit 69b34fb9 ("netfilter: xt_LOG: add net namespace support for xt_LOG") disabled logging packets using the LOG target from non-init namespaces. The motivation was to prevent containers from flooding kernel log of the host. The plan was to keep it that way until syslog namespace implementation allows containers to log in a safe way. However, the work on syslog namespace seems to have hit a dead end somewhere in 2013 and there are users who want to use xt_LOG in all network namespaces. This patch allows to do so by setting /proc/sys/net/netfilter/nf_log_all_netns to a nonzero value. This sysctl is only accessible from init_net so that one cannot switch the behaviour from inside a container. Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> (cherry picked from commit 2851940f) Signed-off-by:
-
Cyril Bur authored
BugLink: http://bugs.launchpad.net/bugs/1771439 Userspace can begin and suspend a transaction within the signal handler which means they might enter sys_rt_sigreturn() with the processor in suspended state. sys_rt_sigreturn() wants to restore process context (which may have been in a transaction before signal delivery). To do this it must restore TM SPRS. To achieve this, any transaction initiated within the signal frame must be discarded in order to be able to restore TM SPRs as TM SPRs can only be manipulated non-transactionally.. >From the PowerPC ISA: TM Bad Thing Exception [Category: Transactional Memory] An attempt is made to execute a mtspr targeting a TM register in other than Non-transactional state. Not doing so results in a TM Bad Thing: [12045.221359] Kernel BUG at c000000000050a40 [verbose debug info unavailable] [12045.221470] Unexpected TM Bad Thing exception at c000000000050a40 (msr 0x201033) [12045.221540] Oops: Unrecoverable exception, sig: 6 [#1] [12045.221586] SMP NR_CPUS=2048 NUMA PowerNV [12045.221634] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tables x_tables kvm_hv kvm uio_pdrv_genirq ipmi_powernv uio powernv_rng ipmi_msghandler autofs4 ses enclosure scsi_transport_sas bnx2x ipr mdio libcrc32c [12045.222167] CPU: 68 PID: 6178 Comm: sigreturnpanic Not tainted 4.7.0 #34 [12045.222224] task: c0000000fce38600 ti: c0000000fceb4000 task.ti: c0000000fceb4000 [12045.222293] NIP: c000000000050a40 LR: c0000000000163bc CTR: 0000000000000000 [12045.222361] REGS: c0000000fceb7ac0 TRAP: 0700 Not tainted (4.7.0) [12045.222418] MSR: 9000000300201033 <SF,HV,ME,IR,DR,RI,LE,TM[SE]> CR: 28444280 XER: 20000000 [12045.222625] CFAR: c0000000000163b8 SOFTE: 0 PACATMSCRATCH: 900000014280f033 GPR00: 01100000b8000001 c0000000fceb7d40 c00000000139c100 c0000000fce390d0 GPR04: 900000034280f033 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000000000 b000000000001033 0000000000000001 0000000000000000 GPR12: 0000000000000000 c000000002926400 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 00003ffff98cadd0 00003ffff98cb470 0000000000000000 GPR28: 900000034280f033 c0000000fceb7ea0 0000000000000001 c0000000fce390d0 [12045.223535] NIP [c000000000050a40] tm_restore_sprs+0xc/0x1c [12045.223584] LR [c0000000000163bc] tm_recheckpoint+0x5c/0xa0 [12045.223630] Call Trace: [12045.223655] [c0000000fceb7d80] [c000000000026e74] sys_rt_sigreturn+0x494/0x6c0 [12045.223738] [c0000000fceb7e30] [c0000000000092e0] system_call+0x38/0x108 [12045.223806] Instruction dump: [12045.223841] 7c800164 4e800020 7c0022a6 f80304a8 7c0222a6 f80304b0 7c0122a6 f80304b8 [12045.223955] 4e800020 e80304a8 7c0023a6 e80304b0 <7c0223a6> e80304b8 7c0123a6 4e800020 [12045.224074] ---[ end trace cb8002ee240bae76 ]--- It isn't clear exactly if there is really a use case for userspace returning with a suspended transaction, however, doing so doesn't (on its own) constitute a bad frame. As such, this patch simply discards the transactional state of the context calling the sigreturn and continues. Reported-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Tested-by:
Simon Guo <wei.guo.simon@gmail.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> (cherry picked from commit 78a3e888) Signed-off-by:
Colin King <colin.king@canonical.com> Acked-by:
-
Ryan Hsu authored
BugLink: https://bugs.launchpad.net/bugs/1748345 Preparation for a new QCA9377 firmware release. The new firmware release requires more IRAM banks, hence update that on ath10k. The IRAM banks promotion won't break any backwards compatibility, as those IRAM banks were not getting used in previous firmware releases. Signed-off-by:
Ryan Hsu <ryanhsu@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> (backported from commit fc8b9263) Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Acked-by:
Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by:
Brad Figg <brad.figg@canonical.com>
-
Seth Forshee authored
BugLink: http://bugs.launchpad.net/bugs/1752536 We ship this firmware but it fails to load because it is not present in the initrd. Add a MODULE_FIRMWARE statement to fix this. Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Acked-by:
Juerg Haefliger <juerg.haefliger@canonical.com> Acked-by:
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1768825Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
-
Romain Izard authored
BugLink: http://bugs.launchpad.net/bugs/1768825 commit 82a3f87f upstream. As the mctrl_gpio driver can be built as a module, it needs to have its license specified with MODULE_LICENSE. Otherwise, it cannot access required symbols exported through EXPORT_SYMBOL_GPL. Signed-off-by:
Romain Izard <romain.izard.pro@gmail.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Daniel Wagner <wagi@monom.org> Signed-off-by:
-
Uwe Kleine-König authored
BugLink: http://bugs.launchpad.net/bugs/1768825 commit 4f71a2e0 upstream. To be able to make use of the mctrl-gpio helper from a module these functions must be exported. This was forgotten in the commit introducing support interrupt handling for these functions (while it was done for mctrl_gpio_enable_ms, *sigh*). Fixes: ce59e48f ("serial: mctrl_gpio: implement interrupt handling") Signed-off-by:
-
Yazen Ghannam authored
BugLink: http://bugs.launchpad.net/bugs/1768825 commit da6fa7ef upstream. Recent AMD systems support using MWAIT for C1 state. However, MWAIT will not allow deeper cstates than C1 on current systems. play_dead() expects to use the deepest state available. The deepest state available on AMD systems is reached through SystemIO or HALT. If MWAIT is available, it is preferred over the other methods, so the CPU never reaches the deepest possible state. Don't try to use MWAIT to play_dead() on AMD systems. Instead, use CPUIDLE to enter the deepest state advertised by firmware. If CPUIDLE is not available then fallback to HALT. Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1768825 commit 1a512c08 upstream. A bugfix broke the x32 shmid64_ds and msqid64_ds data structure layout (as seen from user space) a few years ago: Originally, __BITS_PER_LONG was defined as 64 on x32, so we did not have padding after the 64-bit __kernel_time_t fields, After __BITS_PER_LONG got changed to 32, applications would observe extra padding. In other parts of the uapi headers we seem to have a mix of those expecting either 32 or 64 on x32 applications, so we can't easily revert the path that broke these two structures. Instead, this patch decouples x32 from the other architectures and moves it back into arch specific headers, partially reverting the even older commit 73a2d096 ("x86: remove all now-duplicate header files"). It's not clear whether this ever made any difference, since at least glibc carries its own (correct) copy of both of these header files, so possibly no application has ever observed the definitions here. Based on a suggestion from H.J. Lu, I tried out the tool from https://github.com/hjl-tools/linux-header to find other such bugs, which pointed out the same bug in statfs(), which also has a separate (correct) copy in glibc. Fixes: f4b4aae1 ("x86/headers/uapi: Fix __BITS_PER_LONG value for x32 builds") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Ilya Dryomov authored
BugLink: http://bugs.launchpad.net/bugs/1768825 commit 9c55ad1c upstream. ceph_con_workfn() validates con->state before calling try_read() and then try_write(). However, try_read() temporarily releases con->mutex, notably in process_message() and ceph_con_in_msg_alloc(), opening the window for ceph_con_close() to sneak in, close the connection and release con->sock. When try_write() is called on the assumption that con->state is still valid (i.e. not STANDBY or CLOSED), a NULL sock gets passed to the networking stack: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: selinux_socket_sendmsg+0x5/0x20 Make sure con->state is valid at the top of try_write() and add an explicit BUG_ON for this, similar to try_read(). Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/23706Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Jason Dillaman <dillaman@redhat.com> Signed-off-by:
-
Nicolin Chen authored
BugLink: http://bugs.launchpad.net/bugs/1768825 commit c656941d upstream. When the desired ratio is less than 256, the savesub (tolerance) in the calculation would become 0. This will then fail the loop- search immediately without reporting any errors. But if the ratio is smaller enough, there is no need to calculate the tolerance because PM divisor alone is enough to get the ratio. So a simple fix could be just to set PM directly instead of going into the loop-search. Reported-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Nicolin Chen <nicoleotsuka@gmail.com> Tested-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: http://bugs.launchpad.net/bugs/1768825 commit d2ffed51 upstream. When printing the driver_override parameter when it is 4095 and 4094 bytes long, the printing code would access invalid memory because we need count + 1 bytes for printing. Cfr. commits 4efe874a ("PCI: Don't read past the end of sysfs "driver_override" buffer") and bf563b01 ("driver core: platform: Don't read past the end of "driver_override" buffer"). Fixes: 3cf38571 ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: http://bugs.launchpad.net/bugs/1768825 commit 6a7228d9 upstream. The driver_override implementation is susceptible to a race condition when different threads are reading vs storing a different driver override. Add locking to avoid this race condition. Cfr. commits 62655397 ("driver core: platform: fix race condition with driver_override") and 9561475d ("PCI: Fix race condition with driver_override"). Fixes: 3cf38571 ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'") Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: http://bugs.launchpad.net/bugs/1768825 commit 5f536246 upstream. For AMBA devices with unconfigured driver override, the "driver_override" sysfs virtual file is empty, while it contains "(null)" for platform and PCI devices. Make AMBA consistent with other buses by dropping the test for a NULL pointer. Note that contrary to popular belief, sprintf() handles NULL pointers fine; they are printed as "(null)". Signed-off-by:
-
