Move devlink_registration routine to be the last command, when the
device is fully initialized.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move devlink registration to be the last command in device activation,
so it opens the driver to accept such devlink commands from the user
when it is fully initialized.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move devlink_register to be the last command in the initialization
sequence.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The liquidio driver is broken by design. It initialize PCI devices
in separate delayed works. It causes to the situation where device lock
is dropped during initialize and remove sequences.

That lock is part of driver/core and needed to protect from races during
init, destroy and bus invocations.

In addition to lack of locking protection, it has incorrect order of
destroy flows and very questionable synchronization scheme based on
atomic_t.

This change doesn't fix that driver but makes sure that rest of the
netdev subsystem doesn't suffer from such basic protection by adding
device_lock over devlink_*() APIs and by moving devlink_register()
to be last command in setup_nic_devices().
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move devlink_register() to be last command in devlink configuration
sequence, so no user space access will be possible till devlink instance
is fully operable. As part of this change, the devlink_params_publish
call is removed as not needed.

This change fixes forgotten devlink_params_unpublish() too.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The devlink core code notified users about add/remove objects without
relation if this object can be accessible or not. In this patch we unify
such user visible notifications in one place.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

clang-14 does not like the custom offsetof() macro in vsc7326:

drivers/net/ethernet/chelsio/cxgb/vsc7326.c:597:3: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction]
                HW_STAT(RxUnicast, RxUnicastFramesOK),
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb/vsc7326.c:594:56: note: expanded from macro 'HW_STAT'
        { reg, (&((struct cmac_statistics *)NULL)->stat_name) - (u64 *)NULL }

Rewrite this to use the version provided by the kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

gcc-10 and later warn about a theoretical array overrun when
accessing priv->int_name_rx_irq[i] with an out of bounds value
of 'i':

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function 'stmmac_request_irq_multi_msi':
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3528:17: error: 'snprintf' argument 4 may overlap destination object 'dev' [-Werror=restrict]
 3528 |                 snprintf(int_name, int_name_len, "%s:%s-%d", dev->name, "tx", i);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3404:60: note: destination object referenced by 'restrict'-qualified argument 1 was declared here
 3404 | static int stmmac_request_irq_multi_msi(struct net_device *dev)
      |                                         ~~~~~~~~~~~~~~~~~~~^~~

The warning is a bit strange since it's not actually about the array
bounds but rather about possible string operations with overlapping
arguments, but it's not technically wrong.

Avoid the warning by adding an extra bounds check.

Fixes: 8532f613 ("net: stmmac: introduce MSI Interrupt routines for mac, safety, RX & TX")
Link: https://lore.kernel.org/all/20210421134743.3260921-1-arnd@kernel.org/Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_get_mac_address() reads the same "local-mac-address" property.
... But goes above and beyond by checking the MAC value properly.

printk+message seems outdated too,
so let's put dev_err in the queue.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use resource_size function on resource object
instead of explicit computation.

Clean up coccicheck warning:
./drivers/net/ethernet/microchip/sparx5/sparx5_main.c:237:19-22: ERROR:
Missing resource_size with iores [ idx ]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replacing kmalloc/kfree/dma_map_single/dma_unmap_single()
with dma_alloc_coherent/dma_free_coherent() helps to reduce
code size, and simplify the code, and coherent DMA will not
clear the cache every time.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use dma_alloc_coherent() instead of pci_alloc_consistent(),
because only dma_alloc_coherent() is called here.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_nv.c hasn't use any macro or function declared in mm.h. Thus, these files
can be removed from tcp_nv.c safely without affecting the compilation
of the net module.
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use dma_xxx_xxx() instead of pci_xxx_xxx(),
because the pci function wrappers are not called here.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use dma_alloc_coherent() instead of pci_alloc_consistent(),
because only dma_alloc_coherent() is called here.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use dma_alloc_coherent() instead of pci_alloc_consistent(),
because only dma_alloc_coherent() is called here.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use dma_map_single() instead of pci_map_single(),
because the pci function wrappers are not called here.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use dma_map_single() instead of pci_map_single(),
because only dma_map_single() is called here.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use dma_xxx_xxx() instead of pci_xxx_xxx(),
because the pci function wrappers are not called here.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 3765996e ("napi: fix race inside napi_enable") fixed
an ordering bug in napi_enable() and made the napi_enable() diverge
from napi_disable(). The state transitions done on disable are
not symmetric to enable.

There is no known bug in napi_disable() this is just refactoring.

Eric suggests we can also replace msleep(1) with a more opportunistic
usleep_range().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

rsmu (Renesas Synchronization Management Unit ) driver is located in
drivers/mfd and responsible for creating multiple devices including
clockmatrix phc, which will then use the exposed regmap and mutex
handle to access i2c/spi bus.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The purpose of this test is to verify that after a short activity passes,
the reported time is reasonable: not zero (which could be reported by
mistake), and not something outrageous (which would be indicative of an
issue in used units).

However, the idle time is reported in units of clock_t, or hundredths of
second. If the initial sequence of commands is very quick, it is possible
that the idle time is reported as just flat-out zero. When this test was
recently enabled in our nightly regression, we started seeing spurious
failures for exactly this reason.

Therefore buffer the delay leading up to the test with a sleep, to make
sure there is no legitimate way of reporting 0.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kiran Kumar K says:

====================
adding KPU profile changes for GTPU and custom

Adding changes to limit the KPU processing for GTPU headers to parse
packet up to L4 and added changes to variable length headers to parse LA
as part of PKIND action.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Optimized KPU1 entry processing for variable-length custom L2 headers
of size 24B, 90B by
	- Moving LA LTYPE parsing for 24B and 90B headers to PKIND.
	- Removing LA flags assignment for 24B and 90B headers.
	- Reserving a PKIND 55 to parse variable length headers.

Also, new mailbox(NPC_SET_PKIND) added to configure PKIND with
corresponding variable-length offset, mask, and shift count
(NPC_AF_KPUX_ENTRYX_ACTION0).
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With current KPU profile, while parsing GTPU packets, GTPU payload
is also being parsed and GTPU PDU payload is being treated as IPV4
data, which is not correct. In case of GTPU packets, parsing should
be stopped after identifying the GTPU. Adding changes to limit KPU
profile parsing for GTPU payload.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: Miscellaneous fixes

Here are five changes we've collected and tested in the mptcp-tree:

Patch 1 changes handling of the MPTCP-level snd_next value during the
recovery phase after a subflow link failure.

Patches 2 and 3 are some small refactoring changes to replace some
open-coded bits.

Patch 4 removes an unused field in struct mptcp_sock.

Patch 5 restarts the MPTCP retransmit timer when there is
not-yet-transmitted data to send and all previously sent data has been
acknowledged. This prevents some sending stalls.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The retransmit head will be NULL in case there is no in-flight data
(meaning all data injected into network has been acked).

In that case the retransmit timer is stopped.

This is only correct if there is no more pending, not-yet-sent data.

If there is, the retransmit timer needs to set the PENDING bit again so
that mptcp tries to send the remaining (new) data once a subflow can accept
more data.

Also, mptcp_subflow_get_retrans() has to be called unconditionally.

This function checks for subflows that have become unresponsive and marks
them as stale, so in the case where the rtx queue is empty, subflows
will never be marked stale which prevents available backup subflows from
becoming eligible for transmit.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/226Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The update on recovery is not correct.

msk->tx_pending_data += msk->snd_nxt - rtx_head->data_seq;

will update tx_pending_data multiple times when a subflow is declared
stale while earlier recovery is still in progress.
This means that tx_pending_data will still be positive even after
all data as has been transmitted.

Rather than fix it, remove this field: there are no consumers.
The outstanding data byte count can be computed either via

 "msk->write_seq - rtx_head->data_seq" or
 "msk->write_seq - msk->snd_una".

The latter is more recent/accurate estimate as rtx_head adjustment
is deferred until mptcp lock can be acquired.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have a few more places where the mptcp code duplicates
lockdep_assert_held_once(). Let's use the existing macro and
avoid a bunch of compiler's conditional.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since OPTIONS_MPTCP_MPC has been defined, use it instead of open-coding.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When recovering after a link failure, snd_nxt should not be set to a
lower value.  Else, update of snd_nxt is broken because:

  msk->snd_nxt += ret; (where ret is number of bytes sent)

assumes that snd_nxt always moves forward.
After reduction, its possible that snd_nxt update gets out of sync:
dfrag we just sent might have had a data sequence number even past
recovery_snd_nxt.

This change factors the common msk state update to a helper
and updates snd_nxt based on the current dfrag data sequence number.

The conditional is required for the recovery phase where we may
re-transmit old dfrags that are before current snd_nxt.

After this change, snd_nxt only moves forward and covers all in-sequence
data that was transmitted.

recovery_snd_nxt is retained to detect when recovery has completed.

Fixes: 1e1d9d6f ("mptcp: handle pending data on closed subflow")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2021-09-24

mlx5 misc updates and fixes to net-next branch:

1) Roi Dayan provided some cleanups in mlx5e TC module, and some
   code improvements to fwd/drop actions handling.

2) Tariq, Add TX max rate support for MQPRIO channel mode

3) Dima adds the support for TC egress/ingress offload of macvlan
   interfaces

4) misc cleanup
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Support offloading of TC rules that filter ingress traffic from a MACVLAN
device, which is attached to uplink representor.
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Support offloading of TC rules that mirror/redirect egress traffic to a
MACVLAN device, which is attached to mlx5 representor net device.
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

In switchdev mode we insert steering rules to eswitch that
make sure packets can't be looped back.
Modify the self tests infra and have flags per test.
Add a flag for tests that needs to be skipped in switchdev mode.

Before this commit:

$ ethtool --test enp8s0f0
 The test result is FAIL
 The test extra info:
 Link Test        0
 Speed Test       0
 Health Test      0
 Loopback Test    1

After this commit:

$ ethtool --test enp8s0f0
 The test result is PASS
 The test extra info:
 Link Test        0
 Speed Test       0
 Health Test      0

Example output in dmesg:

enp8s0f0: Self test begin..
enp8s0f0:         [0] Link Test start..
enp8s0f0:         [0] Link Test end: result(0)
enp8s0f0:         [1] Speed Test start..
enp8s0f0:         [1] Speed Test end: result(0)
enp8s0f0:         [2] Health Test start..
enp8s0f0:         [2] Health Test end: result(0)
enp8s0f0: Self test out: status flags(0x1)
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

This to be consistent and adds the module name to the error message.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Instead of having sparse ifdefs in source files use a single
ifdef in the tc sample header file and use stubs.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The priv argument is not being used. remove it.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The driver should add offloaded rules with either a fwd or drop action.
The check existed in parsing fdb flows but not when parsing nic flows.
Move the test into actions_match_supported() which is called for
checking nic flows and fdb flows.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Do it when parsing like in other actions instead of when
checking if goto is supported in current scenario.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>