There are several unused macros. Simplify the logic there, making
it closer to the Intel Aero driver and the corresponding firmware,
as this is what we have widely available for this device.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There's nothing inside such files. Just drop them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This is defined as 64 for the devices/firmware that were chosen.

So, evaluate the macros accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As we're using the firmware from Intel Aero, ensure that the
logic inside sh_css as similar as possible to such driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There's a note at the uninit function that warns about issues
with mipi frames de-allocation. print a warning if the problem
ever happens.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Such function doesn't exist on Intel Aero driver. As we're using
its firmware, it may mean that this is not compatible with the
current file. So, drop it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are some dead code meant to suppress "C_RUN" warnings.

Drop it from sh_css.c, as it doesn't make much sense.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There's a commented dead code related to some future thing
to be implemented. As this won't happen, as it would require
a newer firmware, just drop the code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This function is not used. Drop it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are two versions of those functions. It turns that the
choosen firmware use the old version. So, drop the unused
ones and ensure that all devices will use the right functions.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This function is marked as obsolete and nobody calls it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The firmware chosen for ISP2401 doesn't support it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This was never defined, so remove the #ifdefs, keeping the
code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The chosen firmware has it enabled, so, drop this symbol.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This is not needed for the driver to work. So, just drop it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This is enabled for the firmware we're using. So, just drop
the if's.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

None of the firmwares we use has support for it. So, drop the
unused code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The Yocto Aero driver for ISP2401 sets my_css_save.loaded_fw.
As we're using the same firmware, remove the ifdef there.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Those two vars are meaningful only with some ISP2401 firmwares.
The one we chose to support doesn't use, so simply drop the
extra code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are a couple of places where {} are used just to
define a new var. Just move the var to the top of the function
and get rid of that ugly blocks.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Use the coding style for the comments at this file.

While here, drop a do-nothing if logic.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Now that the input system always declare rx_cfg_t, we can
remove the ifdef ISP2401 from this header.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are several stucts under ISP2400 that could be moved
to the global file without causing any build issues.

Move those to the common header, in order to reduce the number
of things that are #ifdef dependent.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This is not used with supported firmwares, so get rid of such code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

ia_css_dequeue_event() is just an alias to ia_css_dequeue_psys_event(),
and atomisp_css_dequeue_event() do nothing but calling the event
dequeue logic.

Get rid of both abstractions, calling the function directly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The succ var tracks memory allocation erros on this function.

Fix it, in order to stop this W=1 Werror in clang:

drivers/staging/media/atomisp/pci/sh_css_params.c:2430:7: error: variable 'succ' set but not used [-Werror,-Wunused-but-set-variable]
        bool succ = true;
             ^
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add logic to enumerate sensor's frame size and interval.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Allow the sensor to report the per-resolution frame interval.

It should be noticed that, despite the ov2680 datasheet says
that, for resolutions <= 1280x720, the sensor supports 60fps,
the data at ov2680.h tells otherwise, limiting it to 30fps.

Not sure yet if this is a limitation of atomisp or if it is
just because the tables are incorrect.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The ov2680 supports a maximum bandwidth of 660Mbps and allows
up to 60fps when the resolution is below 720p.

Adjust the sensor's table to reflect that.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The sensor resolution arrays have two unused fields. Drop them.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are several resolutions defined for this sensor, but just
two are currently uncommented. Change the driver to allow other
resolutions to also be used.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fix this clang Werror with W=1:

drivers/staging/media/atomisp/i2c/atomisp-gc2235.c:573:6: error: variable 'ret' set but not used [-Werror,-Wunused-but-set-variable]
        int ret = -1;
            ^
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fix this clang Werror with W=1:

	drivers/staging/media/ipu3/ipu3-css-params.c:774:8: error: variable 'pin_scale' set but not used [-Werror,-Wunused-but-set-variable]
	                        int pin_scale = 0;
	                            ^
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The helper function devm_platform_ioremap_resource()
needs HAS_IOMEM enabled, so add the dependency on HAS_IOMEM.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Remove legacy PWM interface (pwm_config, pwm_enable, pwm_disable) and
replace it for the atomic PWM API.
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Remove legacy PWM interface (pwm_config, pwm_enable, pwm_disable) and
replace it for the atomic PWM API.
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

A driver with a remove callback that just returns 0 behaves identically
to a driver with no remove callback at all. So simplify accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.

Remove the redundant 'flush_workqueue()' calls.

This was generated with coccinelle:

@@
expression E;
@@
- 	flush_workqueue(E);
	destroy_workqueue(E);
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.

Remove the redundant 'flush_workqueue()' calls.

This was generated with coccinelle:

@@
expression E;
@@
- 	flush_workqueue(E);
	destroy_workqueue(E);
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fix grammar/wording in the help text for MEDIA_TEST_SUPPORT.

Fixes: 4b32216a ("media: split test drivers from platform directory")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>