- 15 Dec, 2023 40 commits
-
-
Josef Bacik authored
There's no reason this has to happen in open_ctree, and in fact in the old mount API we had to call this from remount. Move this to super.c, unexport it, and call it from both mount and reconfigure. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Anand Jain <anand.jain@oracle.com> Acked-by:
Christian Brauner <brauner@kernel.org> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Josef Bacik authored
Now that we've switched to the new mount API, remove the old stuff. Reviewed-by:
-
Josef Bacik authored
We add these mount options based on the fs_devices settings, which can be set once we've opened the fs_devices. Move these into their own helper and call it from get_tree_super. Reviewed-by:
-
Josef Bacik authored
Now that we have all of the parts in place to use the new mount API, switch our fs_type to use the new callbacks. There are a few things that have to be done at the same time because of the order of operations changes that come along with the new mount API. These must be done in the same patch otherwise things will go wrong. 1. Export and use btrfs_check_options in open_ctree(). This is because the options are done ahead of time, and we need to check them once we have the feature flags loaded. 2. Update the free space cache settings. Since we're coming in with the options already set we need to make sure we don't undo what the user has asked for. 3. Set our sb_flags at init_fs_context time, the fs_context stuff is trying to manage the sb_flagss itself, so move that into init_fs_context and out of the fill super part. Additionally I've marked the unused functions with __maybe_unused and will remove them in a future patch. Reviewed-by:
-
Josef Bacik authored
This is a special case that we've carried around since 0723a047 ("btrfs: allow mounting btrfs subvolumes with different ro/rw options") where we'll under the covers flip the file system to RW if you're mixing and matching ro/rw options with different subvol mounts. The first mount is what the super gets setup as, so we'd handle this by remount the super as rw under the covers to facilitate this behavior. With the new mount API we can't really allow this, because user space has the ability to specify the super block settings, and the mount settings. So if the user explicitly sets the super block as read only, and then tried to mount a rw mount with the super block we'll reject this. However the old API was less descriptive and thus we allowed this kind of behavior. This patch preserves this behavior for the old API calls. This is inspired by Christians work [1], and includes his comment in btrfs_get_tree_super() explaining the history and how it all works in the old and new APIs. Link: https://lore.kernel.org/all/20230626-fs-btrfs-mount-api-v1-2-045e9735a00b@kernel.org/Reviewed-by:
-
Josef Bacik authored
This is the actual mounting callback for the new mount API. Implement this using our current fill super as a guideline, making the appropriate adjustments for the new mount API. Our old mount operation had two fs_types, one to handle the actual opening, and the one that we called to handle the actual opening and then did the subvol lookup for returning the actual root dentry. This is mirrored here, but simply with different behaviors for ->get_tree. We use the existence of ->s_fs_info to tell which part we're in. The initial call allocates the fs_info, then call mount_fc() with a duplicated fc to do the actual open_ctree part. Then we take that vfsmount and use it to look up our subvolume that we're mounting and return that as our s_root. This idea was taken from Christians attempt to convert us to the new mount API [1]. In btrfs_get_tree_super() the mount device is scanned and opened in one go under uuid_mutex we expect that all related devices have been already scanned, either by mount or from the outside. A device forget can be called on some of the devices as the whole context is not protected but it's an unlikely event, though it's a minor behaviour change. References: https://lore.kernel.org/all/20230626-fs-btrfs-mount-api-v1-2-045e9735a00b@kernel.org/Reviewed-by:
-
Josef Bacik authored
This is what is used to remount the file system with the new mount API. Because the mount options are parsed separately and one at a time I've added a helper to emit the mount options after the fact once the mount is configured, this matches the dmesg output for what happens with the old mount API. Reviewed-by:
-
Josef Bacik authored
We are going to use the fs context to hold the mount options, so allocate the btrfs_fs_context when we're asked to init the fs context, and free it in the free callback. Reviewed-by:
-
Josef Bacik authored
The parse_param callback handles one parameter at a time, take our existing mount option parsing loop and adjust it to handle one parameter at a time, and tie it into the fs_context_operations. Create a btrfs_fs_context object that will store the various mount properties, we'll house this in fc->fs_private. This is necessary to separate because remounting will use ->reconfigure, and we'll get a new copy of the parsed parameters, so we can no longer directly mess with the fs_info in this stage. In the future we'll add this to the btrfs_fs_info and update the users to use the new context object instead. There's a change how the option device= is processed. Previously all mount options were parsed in one go under uuid_mutex and the devices opened. This prevented a concurrent scan to happen during mount. Now we could see a device scan happen (e.g. by udev) but this should not affect the end result, mount will either see the populated fs_devices or will scan the device by itself. Alternatively we could save all the device paths first and then process them in one go as before but this does not seem to be necessary. Reviewed-by:
-
Josef Bacik authored
In order to convert to the new mount API we have to change how we do the mount option parsing. For now we're going to duplicate these helpers to make it easier to follow, and then remove the old code once everything is in place. This patch contains the re-definition of all of our mount options into the new fs_parameter_spec format. Reviewed-by:
-
Josef Bacik authored
With the old mount API we'd pre-populate the mount options with the space cache settings of the file system, and then the user toggled them on or off with the mount options. When we switch to the new mount API the mount options will be set before we get into opening the file system, so we need a flag to indicate that the user explicitly asked for -o nospace_cache so we can make the appropriate changes after the fact. Reviewed-by:
-
Josef Bacik authored
When we remount ro->rw or rw->ro we have some cleanup tasks that have to be managed. Split these out into their own function to make btrfs_remount smaller. Reviewed-by:
-
Josef Bacik authored
We currently don't allow these options to be set if we're extent tree v2 via the mount option parsing. However when we switch to the new mount API we'll no longer have the super block loaded, so won't be able to make this distinction at mount option parsing time. Address this by checking for extent tree v2 at the point where we make the decision to rebuild the free space tree. Reviewed-by:
-
Josef Bacik authored
Currently we pre-load the space cache settings in btrfs_parse_options, however when we switch to the new mount API the mount option parsing will happen before we have the super block loaded. Add a helper to set the appropriate options based on the fs settings, this will allow us to have consistent free space cache settings. This also folds in the space cache related decisions we make for subpage sectorsize support, so all of this is done in one place. Since this was being called by parse options it looks like we're changing the behavior of remount, but in fact we aren't. The pre-loading of the free space cache settings is done because we want to handle the case of users not using any space_cache options, we'll derive the appropriate mount option based on the on disk state. On remount this wouldn't reset anything as we'll have cleared the v1 cache generation if we mounted -o nospace_cache. Similarly it's impossible to turn off the free space tree without specifically saying -o nospace_cache,clear_cache, which will delete the free space tree and clear the compat_ro option. Again in this case calling this code in remount wouldn't result in any change. Reviewed-by:
-
Josef Bacik authored
With the new mount API we'll be setting our compression well before we call open_ctree. We don't want to overwrite our settings, so set the default in btrfs_init_fs_info instead of open_ctree. Reviewed-by:
-
Josef Bacik authored
We're going to need to validate mount options after they're all parsed with the new mount API, split this code out into its own helper so we can use it when we swap over to the new mount API. Reviewed-by:
-
Christian Brauner authored
We already communicate to filesystems when a remount request comes from the old mount API as some filesystems choose to implement different behavior in the new mount API than the old mount API to e.g., take the chance to fix significant API bugs. Allow the same for regular mount requests. Fixes: b330966f ("fuse: reject options on reconfigure via fsconfig(2)") Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Filipe Manana authored
After commit ac3c0d36 ("btrfs: make fiemap more efficient and accurate reporting extent sharedness") we no longer need to create special extent maps during fiemap that have a block start with the EXTENT_MAP_DELALLOC value. So this block start value for extent maps is no longer used since then, therefore remove it. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
-
Qu Wenruo authored
Currently btrfs extent buffer helpers are doing all the cross-page handling, as there is no guarantee that all those eb pages are contiguous. However on systems with enough memory, there is a very high chance the page cache for btree_inode are allocated with physically contiguous pages. In that case, we can skip all the complex cross-page handling, thus speeding up the code. This patch adds a new member, extent_buffer::addr, which is only set to non-NULL if all the extent buffer pages are physically contiguous. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Johannes Thumshirn authored
Reflow btrfs_free_tree_block() so that there is one level of indentation needed. This patch has no functional changes. Reviewed-by:
-
Johannes Thumshirn authored
Use memset_page() in memset_extent_buffer() instead of opencoding it. This does not not change any functionality. Reviewed-by:
-
Johannes Thumshirn authored
Now that we're not clearing the dirty flag off of extent_buffers in zoned mode, all that is left of btrfs_redirty_list_add() is a memzero() and some ASSERT()ions. As we're also memzero()ing the buffer on write-out btrfs_redirty_list_add() has become obsolete and can be removed. Reviewed-by:
-
Johannes Thumshirn authored
One a zoned filesystem, never clear the dirty flag of an extent buffer, but instead mark it as zeroout. On writeout, when encountering a marked extent_buffer, zero it out. Reviewed-by:
-
Johannes Thumshirn authored
EXTENT_BUFFER_ZONED_ZEROOUT better describes the state of the extent buffer, namely it is written as all zeros. This is needed in zoned mode, to preserve I/O ordering. Reviewed-by:
-
David Sterba authored
The extent_io_tree is embedded in several structures, notably in struct btrfs_inode. The fs_info is only used for reporting errors and for reference in trace points. We can get to the pointer through the inode, but not all io trees set it. However, we always know the owner and can recognize if inode is valid. For access helpers are provided, const variant for the trace points. This reduces size of extent_io_tree by 8 bytes and following structures in turn: - btrfs_inode 1104 -> 1088 - btrfs_device 520 -> 512 - btrfs_root 1360 -> 1344 - btrfs_transaction 456 -> 440 - btrfs_fs_info 3600 -> 3592 - reloc_control 1520 -> 1512 Reviewed-by:
-
David Sterba authored
Pass the type of the extent io tree operation which failed in the report helper. The message wording and contents is updated, though locking might be the cause of the error it's probably not the only one and we're interested in the state. Reviewed-by:
-
David Sterba authored
The printk helpers take const fs_info if it's used just for the identifier in the messages, __btrfs_panic() lacks that. Reviewed-by:
-
David Sterba authored
The helper insert_state errors are handled in all callers and reported by extent_io_tree_panic so we don't need to do it twice. Reviewed-by:
-
David Sterba authored
The per-inode file extent tree was added in 41a2ee75 ("btrfs: introduce per-inode file extent tree"), it's the only tree type that requires the lockdep class. Move it to the file where it is actually used. Reviewed-by:
-
Filipe Manana authored
It's not needed to have a local variable to store the stripe size at insert_dev_extents(), we can just take from the chunk map as it's only used once and typing 'map->stripe_size' is not much more verbose than simply typing 'stripe_size'. So remove the local variable. This was added before the recent addition of a dedicated structure for chunk mappings because the stripe size was encoded in the 'orig_block_len' field of an extent_map structure, so the use of the local variable made things more readable. Reviewed-by:
-
Filipe Manana authored
Currently we abuse the extent_map structure for two purposes: 1) To actually represent extents for inodes; 2) To represent chunk mappings. This is odd and has several disadvantages: 1) To create a chunk map, we need to do two memory allocations: one for an extent_map structure and another one for a map_lookup structure, so more potential for an allocation failure and more complicated code to manage and link two structures; 2) For a chunk map we actually only use 3 fields (24 bytes) of the respective extent map structure: the 'start' field to have the logical start address of the chunk, the 'len' field to have the chunk's size, and the 'orig_block_len' field to contain the chunk's stripe size. Besides wasting a memory, it's also odd and not intuitive at all to have the stripe size in a field named 'orig_block_len'. We are also using 'block_len' of the extent_map structure to contain the chunk size, so we have 2 fields for the same value, 'len' and 'block_len', which is pointless; 3) When an extent map is associated to a chunk mapping, we set the bit EXTENT_FLAG_FS_MAPPING on its flags and then make its member named 'map_lookup' point to the associated map_lookup structure. This means that for an extent map associated to an inode extent, we are not using this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform); 4) Extent maps associated to a chunk mapping are never merged or split so it's pointless to use the existing extent map infrastructure. So add a dedicated data structure named 'btrfs_chunk_map' to represent chunk mappings, this is basically the existing map_lookup structure with some extra fields: 1) 'start' to contain the chunk logical address; 2) 'chunk_len' to contain the chunk's length; 3) 'stripe_size' for the stripe size; 4) 'rb_node' for insertion into a rb tree; 5) 'refs' for reference counting. This way we do a single memory allocation for chunk mappings and we don't waste memory for them with unused/unnecessary fields from an extent_map. We also save 8 bytes from the extent_map structure by removing the 'map_lookup' pointer, so the size of struct extent_map is reduced from 144 bytes down to 136 bytes, and we can now have 30 extents map per 4K page instead of 28. Reviewed-by:
-
Filipe Manana authored
There's no reason to open code what btrfs_next_item() does when searching for extent items at scrub.c:scrub.c:find_first_extent_item(), so remove the logic to find the next item and use btrfs_next_item() instead, making the code shorter and less nested code blocks. While at it also fix the comment to the plural "items" instead of "item" and end it with proper punctuation. Reviewed-by:
-
Filipe Manana authored
The helper extent_map_block_end() is currently not used anywhere outside extent_map.c, so move into from extent_map.h into extent_map.c. While at it, also make the extent map pointer argument as const. Reviewed-by:
-
Filipe Manana authored
When starting a transaction to remove a block group we have one ASSERT that checks we found an extent map and that the extent map's start offset matches the desired chunk offset. In case one of the conditions fails, we get a stack trace that point to the respective line of code, however we can't tell which condition failed: either there's no extent map or we got one with an unexpected start offset. To make such an issue easier to debug and analyse, split the assertion into two, one for each condition. This was actually triggered during development of another upcoming change. Reviewed-by:
-
Filipe Manana authored
When getting a chunk map, at btrfs_get_chunk_map(), we do some sanity checks to verify that we found an extent map and that it includes the requested logical address. These are never expected to fail, so mark them as unlikely to make it more clear as well as to allow a compiler to generate more efficient code. Reviewed-by:
-
David Sterba authored
Looks like the struct member was added in 2007 in 2.6.29 in commit 87ee04eb ("Btrfs: Add simple stripe size parameter") but hasn't been used at all since. So let's remove it. This was found by tool https://github.com/jirislaby/clang-struct, then build tested after removing the struct member. Reviewed-by:
-
David Sterba authored
The declaration was temporarily moved in a4055213 ("btrfs: unexport all the temporary exports for extent-io-tree.c") and then should have been removed in 6.0 in 071d19f5 ("btrfs: remove struct tree_entry in extent-io-tree.c") but was not. This was found by tool https://github.com/jirislaby/clang-struct . Reviewed-by:
-
David Sterba authored
The raid56 changes in 6.2 reworked the IO path to RMW, commit 93723095 ("btrfs: raid56: switch write path to rmw_rbio()") in particular removed the last use of the work member so it can be removed as well. This was found by tool https://github.com/jirislaby/clang-struct . Reviewed-by:
-
David Sterba authored
The whole isize code was deleted in 5.6 3f1c64ce ("btrfs: delete the ordered isize update code"), except the struct member. This was found by tool https://github.com/jirislaby/clang-struct . Reviewed-by:
-
David Sterba authored
The recent scrub rewrite forgot to remove the sectors_per_bio in 6.3 in 13a62fd9 ("btrfs: scrub: remove scrub_bio structure"). This was found by tool https://github.com/jirislaby/clang-struct . Reviewed-by:
-
