- 14 Aug, 2015 4 commits
-
-
Fabio Estevam authored
The current "We only connect the NOR to this controller now." text is not very clear, so explain it better by saying that generic SPI is not supported by SPI_FSL_QUADSPI and only SPI NOR is. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Joachim Eastwood authored
Add SPI-NOR driver for the SPI Flash Interface (SPIFI) controller that is found on newer NXP MCU devices. The controller supports serial SPI Flash devices with 1-, 2- and 4-bit width in either SPI mode 0 or 3. The controller can operate in either command or memory mode. In memory mode the Flash is exposed as normal memory and can be directly accessed by the CPU. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Joachim Eastwood authored
Add device tree binding documentation for the SPI Flash Interface (SPIFI) found on NXP LPC18xx and LPC43xx devies. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Ezequiel Garcia authored
The initial buffer is used for the initial commands used to detect a flash device (STATUS, READID and PARAM). ONFI param page is 256 bytes, and there are three redundant copies to be read. JEDEC param page is 512 bytes, and there are also three redundant copies to be read. Hence this buffer should be at least 512 x 3. This commits rounds the buffer size to 2048. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
- 07 Aug, 2015 1 commit
-
-
Axel Lin authored
While IS_ENABLED() is perfectly fine for CONFIG_* symbols, it is not for other symbols such as __BIG_ENDIAN that is provided directly by the compiler. Switch to use CONFIG_CPU_BIG_ENDIAN instead of __BIG_ENDIAN. Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
- 06 Aug, 2015 10 commits
-
-
Frank Li authored
Erase function will use cmd 0x20 (SPINOR_OP_BE_4K) if kenrel enable option CONFIG_MTD_SPI_NOR_USE_4K_SECTORS. This command is not in fsl-quadspi driver LUT. So driver continue report fsl-quadspi 21e0000.qspi: Unsupported cmd 0x20. This patch fix this issue. Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Han Xu <Han.xu@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Frank Li authored
The uboot may run the QuadSpi controler with command: #sf probe So we should reset the module in the probe. This patch also clear the pending interrupts which arised by the uboot code. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Frank Li authored
QSPI1 cannot wake up CCM from WAIT mode on SX ARD board, add pmqos to let PM NOT enter WAIT mode when accessing QSPI1, refer to TKT245618. Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Han Xu <Han.xu@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Allen Xu authored
We found there is a low probability(5%) QSPI access timeout issue, usually it happened on kernel boot stage, the first time kernel tried to access QSPI chip. The READ_ID command was sent but not executed, consequently the probe function failed. The root cause is that the divider is not glitchless in i.MX6SX chip. If qspi clock enabled then change clock frequency by call clk_set_rate, there will be glitch at low possiblity rate and pass to qspi controller. The controler will be hang by this glitch. Based on the new clock flag(CLK_SET_RATE_GATE) and new framework, we need to change the approach of seting clock rate. 1. Disable clock. 2. call clk_set_rate. 3. Enable clock again. Signed-off-by: Han Xu <han.xu@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Frank Li authored
new compatible string: "fsl,imx6ul-qspi". Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Frank Li authored
Add i.mx6ul chip support Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Han xu <han.xu@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Frank Li authored
new compatible string: "fsl,imx7d-qspi" Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Frank Li authored
Support i.mx7d. quadspi in i.mx7d increase rxfifo. require fill at least 16byte to trigger data transfer. Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Han Xu <han.xu@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Han Xu authored
add several quirk to distinguish different version of qspi module. Signed-off-by: Han Xu <han.xu@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Han Xu authored
QSPI may failed to map enough memory (256MB) for AHB read in previous implementation, especially in 3G/1G memory layout kernel. Dynamically map memory to avoid such issue. This implementation generally map QUADSPI_MAX_IOMAP (default 4MB) memory for AHB read, it should be enough for common scenarios, and the side effect (0.6% performance drop) is minor. Previous implementation root@imx6qdlsolo:~# dd if=/dev/mtd0 of=/dev/null bs=1K count=32K 32768+0 records in 32768+0 records out 33554432 bytes (34 MB) copied, 2.16006 s, 15.5 MB/s root@imx6qdlsolo:~# dd if=/dev/mtd0 of=/dev/null bs=32M count=1 1+0 records in 1+0 records out 33554432 bytes (34 MB) copied, 1.43149 s, 23.4 MB/s After applied the patch root@imx6qdlsolo:~# dd if=/dev/mtd0 of=/dev/null bs=1K count=32K 32768+0 records in 32768+0 records out 33554432 bytes (34 MB) copied, 2.1743 s, 15.4 MB/s root@imx6qdlsolo:~# dd if=/dev/mtd0 of=/dev/null bs=32M count=1 1+0 records in 1+0 records out 33554432 bytes (34 MB) copied, 1.43158 s, 23.4 MB/s Signed-off-by: Han Xu <han.xu@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
- 21 Jul, 2015 1 commit
-
-
Brian Norris authored
When we added the "jedec,spi-nor" compatible string for use in this driver, we added it as a modalias option. The modalias can be derived in different ways for platform devices vs. device tree (of_*) matching. But for device tree matching (the primary target of this identifier string), the modalias is determined from the first entry in the 'compatible' property. IOW, the following properties would bind to this driver: // Option (a), modalias = "spi-nor" compatible = "jedec,spi-nor"; // Option (b), modalias = "spi-nor" compatible = "idontknowwhatimdoing,spi-nor"; But the following would not: // Option (c), modalias = "shinynewdevice" compatible = "myvendor,shinynewdevice", "jedec,spi-nor"; So, we'd like to match (a) and (c) (even when we don't have an explicit entry for "shinynewdevice"), and we'd rather not allow (b). To do this, we (1) always (for devices without specific platform data) pass the modalias to the spi-nor library; (2) rework the spi-nor library to not reject "bad" names, and instead just fall back to autodetection; and (3) add the .of_match_table to properly catch all "jedec,spi-nor". This allows (a) and (c) without warnings, and rejects (b). Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
- 20 Jul, 2015 6 commits
-
-
Roy Spliet authored
Replaces the hard coded "always use EDO" policy with that prescribed by the ONFI 3.1 specification that EDO mode should always be used if tRC is below 30ns. Signed-off-by: Roy Spliet <r.spliet@ultimaker.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Roy Spliet authored
The TIMING_CFG register was previously statically set to a magic value (extracted from Allwinner's BSP) when initializing the NAND controller. Now that we have more details about the TIMING_CFG register layout (extracted from the A83 user manual) we can dynamically calculate the appropriate value for each NAND chip and set it when selecting the chip. Signed-off-by: Roy Spliet <r.spliet@ultimaker.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Alexey Firago authored
Micron n25q064 flash supports 4 KiB erase sectors. Signed-off-by: Alexey Firago <alexey_firago@mentor.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Alexander Stein authored
QUADSPI_MCR_CLR_TXF_MASK is the correct mask for clearing the TX FIFO. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Nicolas Iooss authored
r852_ecc_correct() reads a 32-bit register into a 16-bit variable, ecc_reg, but this variable is later used as if it was larger. This is reported by clang when building the kernel with many warnings: drivers/mtd/nand/r852.c:512:11: error: shift count >= width of type [-Werror,-Wshift-count-overflow] ecc_reg >>= 16; ^ ~~ Fix this by making ecc_reg 32-bit, like the return type of r852_read_reg_dword(). Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Sandeep Paulraj authored
It is needed for k2l keystone2 EVM which uses NAND flash with 4K page size, hence add support for 4K page size nand devices. [Brian: similar work submitted by Murali Karicheri <m-karicheri2@ti.com> and Hao Zhang <hzhang@ti.com>] Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
- 07 Jul, 2015 2 commits
-
-
Brian Norris authored
-
Scott Wood authored
Commit 66507c7b ("mtd: nand: Add support to use nand_base poi databuf as bounce buffer") added a flag NAND_USE_BOUNCE_BUFFER using the same bit value as the existing NAND_BUSWIDTH_AUTO. Cc: Kamal Dasu <kdasu.kdev@gmail.com> Fixes: 66507c7b ("mtd: nand: Add support to use nand_base poi databuf as bounce buffer") Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
- 06 Jul, 2015 4 commits
-
-
shengyong authored
Do not call free_device() in init_nandsim, the caller - ns_init_module - will take care of that if something goes wrong. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
shengyong authored
If allocating ns->nand_pages_slab fails, do not try to destroy it when cleaning up nandsim resources. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Brian Norris authored
-
Robert Jarzmik authored
Add myself as maintainer of the NAND based MSystems DiskOnChip G3 driver. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
- 05 Jul, 2015 4 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull late x86 platform driver updates from Darren Hart: "The following came in a bit later and I wanted them to bake in next a few more days before submitting, thus the second pull. A new intel_pmc_ipc driver, a symmetrical allocation and free fix in dell-laptop, a couple minor fixes, and some updated documentation in the dell-laptop comments. intel_pmc_ipc: - Add Intel Apollo Lake PMC IPC driver tc1100-wmi: - Delete an unnecessary check before the function call "kfree" dell-laptop: - Fix allocating & freeing SMI buffer page - Show info about WiGig and UWB in debugfs - Update information about wireless control" * tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: intel_pmc_ipc: Add Intel Apollo Lake PMC IPC driver tc1100-wmi: Delete an unnecessary check before the function call "kfree" dell-laptop: Fix allocating & freeing SMI buffer page dell-laptop: Show info about WiGig and UWB in debugfs dell-laptop: Update information about wireless control
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more vfs updates from Al Viro: "Assorted VFS fixes and related cleanups (IMO the most interesting in that part are f_path-related things and Eric's descriptor-related stuff). UFS regression fixes (it got broken last cycle). 9P fixes. fs-cache series, DAX patches, Jan's file_remove_suid() work" [ I'd say this is much more than "fixes and related cleanups". The file_table locking rule change by Eric Dumazet is a rather big and fundamental update even if the patch isn't huge. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits) 9p: cope with bogus responses from server in p9_client_{read,write} p9_client_write(): avoid double p9_free_req() 9p: forgetting to cancel request on interrupted zero-copy RPC dax: bdev_direct_access() may sleep block: Add support for DAX reads/writes to block devices dax: Use copy_from_iter_nocache dax: Add block size note to documentation fs/file.c: __fget() and dup2() atomicity rules fs/file.c: don't acquire files->file_lock in fd_install() fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation vfs: avoid creation of inode number 0 in get_next_ino namei: make set_root_rcu() return void make simple_positive() public ufs: use dir_pages instead of ufs_dir_pages() pagemap.h: move dir_pages() over there remove the pointless include of lglock.h fs: cleanup slight list_entry abuse xfs: Correctly lock inode when removing suid and file capabilities fs: Call security_ops->inode_killpriv on truncate fs: Provide function telling whether file_remove_privs() will do anything ...
-
Linus Torvalds authored
Commit 835a6a2f ("Bluetooth: Stop sabotaging list poisoning") thought that the code was sabotaging the list poisoning when NULL'ing out the list pointers and removed it. But what was going on was that the bluetooth code was using NULL pointers for the list as a way to mark it empty, and that commit just broke it (and replaced the test with NULL with a "list_empty()" test on a uninitialized list instead, breaking things even further). So fix it all up to use the regular and real list_empty() handling (which does not use NULL, but a pointer to itself), also making sure to initialize the list properly (the previous NULL case was initialized implicitly by the session being allocated with kzalloc()) This is a combination of patches by Marcel Holtmann and Tedd Ho-Jeong An. [ I would normally expect to get this through the bt tree, but I'm going to release -rc1, so I'm just committing this directly - Linus ] Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Original-by: Tedd Ho-Jeong An <tedd.an@intel.com> Original-by: Marcel Holtmann <marcel@holtmann.org>: Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 04 Jul, 2015 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target updates from Nicholas Bellinger: "It's been a busy development cycle for target-core in a number of different areas. The fabric API usage for se_node_acl allocation is now within target-core code, dropping the external API callers for all fabric drivers tree-wide. There is a new conversion to RCU hlists for se_node_acl and se_portal_group LUN mappings, that turns fast-past LUN lookup into a completely lockless code-path. It also removes the original hard-coded limitation of 256 LUNs per fabric endpoint. The configfs attributes for backends can now be shared between core and driver code, allowing existing drivers to use common code while still allowing flexibility for new backend provided attributes. The highlights include: - Merge sbc_verify_dif_* into common code (sagi) - Remove iscsi-target support for obsolete IFMarker/OFMarker (Christophe Vu-Brugier) - Add bidi support in target/user backend (ilias + vangelis + agover) - Move se_node_acl allocation into target-core code (hch) - Add crc_t10dif_update common helper (akinobu + mkp) - Handle target-core odd SGL mapping for data transfer memory (akinobu) - Move transport ID handling into target-core (hch) - Move task tag into struct se_cmd + support 64-bit tags (bart) - Convert se_node_acl->device_list[] to RCU hlist (nab + hch + paulmck) - Convert se_portal_group->tpg_lun_list[] to RCU hlist (nab + hch + paulmck) - Simplify target backend driver registration (hch) - Consolidate + simplify target backend attribute implementations (hch + nab) - Subsume se_port + t10_alua_tg_pt_gp_member into se_lun (hch) - Drop lun_sep_lock for se_lun->lun_se_dev RCU usage (hch + nab) - Drop unnecessary core_tpg_register TFO parameter (nab) - Use 64-bit LUNs tree-wide (hannes) - Drop left-over TARGET_MAX_LUNS_PER_TRANSPORT limit (hannes)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (76 commits) target: Bump core version to v5.0 target: remove target_core_configfs.h target: remove unused TARGET_CORE_CONFIG_ROOT define target: consolidate version defines target: implement WRITE_SAME with UNMAP bit using ->execute_unmap target: simplify UNMAP handling target: replace se_cmd->execute_rw with a protocol_data field target/user: Fix inconsistent kmap_atomic/kunmap_atomic target: Send UA when changing LUN inventory target: Send UA upon LUN RESET tmr completion target: Send UA on ALUA target port group change target: Convert se_lun->lun_deve_lock to normal spinlock target: use 'se_dev_entry' when allocating UAs target: Remove 'ua_nacl' pointer from se_ua structure target_core_alua: Correct UA handling when switching states xen-scsiback: Fix compile warning for 64-bit LUN target: Remove TARGET_MAX_LUNS_PER_TRANSPORT target: use 64-bit LUNs target: Drop duplicate + unused se_dev_check_wce target: Drop unnecessary core_tpg_register TFO parameter ...
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "This includes a pretty significant reworking of the NTB core code, but has already produced some significant performance improvements. An abstraction layer was added to allow the hardware and clients to be easily added. This required rewriting the NTB transport layer for this abstraction layer. This modification will allow future "high performance" NTB clients. In addition to this change, a number of performance modifications were added. These changes include NUMA enablement, using CPU memcpy instead of asyncdma, and modification of NTB layer MTU size" * tag 'ntb-4.2' of git://github.com/jonmason/ntb: (22 commits) NTB: Add split BAR output for debugfs stats NTB: Change WARN_ON_ONCE to pr_warn_once on unsafe NTB: Print driver name and version in module init NTB: Increase transport MTU to 64k from 16k NTB: Rename Intel code names to platform names NTB: Default to CPU memcpy for performance NTB: Improve performance with write combining NTB: Use NUMA memory in Intel driver NTB: Use NUMA memory and DMA chan in transport NTB: Rate limit ntb_qp_link_work NTB: Add tool test client NTB: Add ping pong test client NTB: Add parameters for Intel SNB B2B addresses NTB: Reset transport QP link stats on down NTB: Do not advance transport RX on link down NTB: Differentiate transport link down messages NTB: Check the device ID to set errata flags NTB: Enable link for Intel root port mode in probe NTB: Read peer info from local SPAD in transport NTB: Split ntb_hw_intel and ntb_transport drivers ...
-
Al Viro authored
if server claims to have written/read more than we'd told it to, warn and cap the claimed byte count to avoid advancing more than we are ready to.
-
Al Viro authored
Braino in "9p: switch p9_client_write() to passing it struct iov_iter *"; if response is impossible to parse and we discard the request, get the out of the loop right there. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
If we'd already sent a request and decide to abort it, we *must* issue TFLUSH properly and not just blindly reuse the tag, or we'll get seriously screwed when response eventually arrives and we confuse it for response to later request that had reused the same tag. Cc: stable@vger.kernel.org # v3.2 and later Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Matthew Wilcox authored
The brd driver is the only in-tree driver that may sleep currently. After some discussion on linux-fsdevel, we decided that any driver may choose to sleep in its ->direct_access method. To ensure that all callers of bdev_direct_access() are prepared for this, add a call to might_sleep(). Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Matthew Wilcox authored
If a block device supports the ->direct_access methods, bypass the normal DIO path and use DAX to go straight to memcpy() instead of allocating a DIO and a BIO. Includes support for the DIO_SKIP_DIO_COUNT flag in DAX, as is done in do_blockdev_direct_IO(). Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Matthew Wilcox authored
When userspace does a write, there's no need for the written data to pollute the CPU cache. This matches the original XIP code. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-