There are a number of flags used in the IPA driver to attempt to
manage race conditions that can occur between runtime resume and
netdev transmit.  If we disable TX before requesting power, we can
avoid these races entirely, simplifying things considerably.

This patch implements the main change, disabling transmit always in
the net_device->ndo_start_xmit() callback, then re-enabling it again
whenever we find power is active (or when we drop the skb).

The patches that follow will refactor the "old" code to the point
that most of it can be eliminated.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240130192305.250915-3-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rather than repeatedly looking up the endpoints in the name map,
save the modem TX and RX endpoint pointers in the netdev private
area.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240130192305.250915-2-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter.

  As Paolo promised we continue to hammer out issues in our selftests.
  This is not the end but probably the peak.

  Current release - regressions:

   - smc: fix incorrect SMC-D link group matching logic

  Current release - new code bugs:

   - eth: bnxt: silence WARN() when device skips a timestamp, it happens

  Previous releases - regressions:

   - ipmr: fix null-deref when forwarding mcast packets

   - conntrack: evaluate window negotiation only for packets in the
     REPLY direction, otherwise SYN retransmissions trigger incorrect
     window scale negotiation

   - ipset: fix performance regression in swap operation

  Previous releases - always broken:

   - tcp: add sanity checks to types of pages getting into the rx
     zerocopy path, we only support basic NIC -> user, no page cache
     pages etc.

   - ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()

   - nt_tables: more input sanitization changes

   - dsa: mt7530: fix 10M/100M speed on MediaTek MT7988 switch

   - bridge: mcast: fix loss of snooping after long uptime, jiffies do
     wrap on 32bit

   - xen-netback: properly sync TX responses, protect with locking

   - phy: mediatek-ge-soc: sync calibration values with MediaTek SDK,
     increase connection stability

   - eth: pds: fixes for various teardown, and reset races

  Misc:

   - hsr: silence WARN() if we can't alloc supervision frame, it
     happens"

* tag 'net-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
  doc/netlink/specs: Add missing attr in rt_link spec
  idpf: avoid compiler padding in virtchnl2_ptype struct
  selftests: mptcp: join: stop transfer when check is done (part 2)
  selftests: mptcp: join: stop transfer when check is done (part 1)
  selftests: mptcp: allow changing subtests prefix
  selftests: mptcp: decrease BW in simult flows
  selftests: mptcp: increase timeout to 30 min
  selftests: mptcp: add missing kconfig for NF Mangle
  selftests: mptcp: add missing kconfig for NF Filter in v6
  selftests: mptcp: add missing kconfig for NF Filter
  mptcp: fix data re-injection from stale subflow
  selftests: net: enable some more knobs
  selftests: net: add missing config for NF_TARGET_TTL
  selftests: forwarding: List helper scripts in TEST_FILES Makefile variable
  selftests: net: List helper scripts in TEST_FILES Makefile variable
  selftests: net: Remove executable bits from library scripts
  selftests: bonding: Check initial state
  selftests: team: Add missing config options
  hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove
  xen-netback: properly sync TX responses
  ...

Pull parisc architecture fixes from Helge Deller:
 "The current exception handler, which helps on kernel accesses to
  userspace, may exhibit data corruption. The problem is that it is not
  guaranteed that the compiler will use the processor register we
  specified in the source code, but may choose another register which
  then will lead to silent register- and data corruption. To fix this
  issue we now use another strategy to help the exception handler to
  always find and set the error code into the correct CPU register.

  The other fixes are small: fixing CPU hotplug bringup, fix the page
  alignment of the RO_DATA section, added a check for the calculated
  cache stride and fix possible hangups when printing longer output at
  bootup when running on serial console.

  Most of the patches are tagged for stable series.

   - Fix random data corruption triggered by exception handler

   - Fix crash when setting up BTLB at CPU bringup

   - Prevent hung tasks when printing inventory on serial console

   - Make RO_DATA page aligned in vmlinux.lds.S

   - Add check for valid cache stride size"

* tag 'parisc-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: BTLB: Fix crash when setting up BTLB at CPU bringup
  parisc: Fix random data corruption from exception handler
  parisc: Drop unneeded semicolon in parse_tree_node()
  parisc: Prevent hung tasks when printing inventory on serial console
  parisc: Check for valid stride size for cache flushes
  parisc: Make RO_DATA page aligned in vmlinux.lds.S

Merge tag 'kbuild-fixes-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix UML build with clang-18 and newer

 - Avoid using the alias attribute in host programs

 - Replace tabs with spaces when followed by conditionals for future GNU
   Make versions

 - Fix rpm-pkg for the systemd-provided kernel-install tool

 - Fix the undefined behavior in Kconfig for a 'int' symbol used in a
   conditional

* tag 'kbuild-fixes-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: initialize sym->curr.tri to 'no' for all symbol types again
  kbuild: rpm-pkg: simplify installkernel %post
  kbuild: Replace tabs with spaces when followed by conditionals
  modpost: avoid using the alias attribute
  kbuild: fix W= flags in the help message
  modpost: Add '.ltext' and '.ltext.*' to TEXT_SECTIONS
  um: Fix adding '-no-pie' for clang
  kbuild: defconf: use SRCARCH to find merged configs

Pull nfsd fix from Chuck Lever:

 - Fix a recent backchannel timeout fix

* tag 'nfsd-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSv4.1: Assign the right value for initval and retries for rpc timeout

Pull exfat fix from Namjae Jeon:

 - Fix BUG in iov_iter_revert reported from syzbot

* tag 'exfat-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: fix zero the unwritten part for dio read

Pull HID fixes from Benjamin Tissoires:

 - cleanups in the error path in hid-steam (Dan Carpenter)

 - fixes for Wacom tablets selftests that sneaked in while the CI was
   taking a break during the year end holidays (Benjamin Tissoires)

 - null pointer check in nvidia-shield (Kunwu Chan)

 - memory leak fix in hidraw (Su Hui)

 - another null pointer fix in i2c-hid-of (Johan Hovold)

 - another memory leak fix in HID-BPF this time, as well as a double
   fdget() fix reported by Dan Carpenter (Benjamin Tissoires)

 - fix for Cirque touchpad when they go on suspend (Kai-Heng Feng)

 - new device ID in hid-logitech-hidpp: "Logitech G Pro X SuperLight 2"
   (Jiri Kosina)

* tag 'hid-for-linus-2024020101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: bpf: use __bpf_kfunc instead of noinline
  HID: bpf: actually free hdev memory after attaching a HID-BPF program
  HID: bpf: remove double fdget()
  HID: i2c-hid-of: fix NULL-deref on failed power up
  HID: hidraw: fix a problem of memory leak in hidraw_release()
  HID: i2c-hid: Skip SET_POWER SLEEP for Cirque touchpad on system suspend
  HID: nvidia-shield: Add missing null pointer checks to LED initialization
  HID: logitech-hidpp: add support for Logitech G Pro X Superlight 2
  selftests/hid: wacom: fix confidence tests
  HID: hid-steam: Fix cleanup in probe()
  HID: hid-steam: remove pointless error message

Merge tag 'firewire-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fixes from Takashi Sakamoto:
 "FireWire subsystem now supports the legacy layout of configuration
  ROM, while it appears that some of DV devices in the early 2000's have
  the legacy layout with a quirk. This includes some changes to handle
  the quirk"

* tag 'firewire-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: core: search descriptor leaf just after vendor directory entry in root directory
  firewire: core: correct documentation of fw_csr_string() kernel API

Pull spi fix from Mark Brown:
 "One simple fix for a minor but valid issue with constants overflowing
  identified via cppcheck"

* tag 'spi-fix-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: sh-msiof: avoid integer overflow in constants

Merge tag 'regulator-fix-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "The main set of fixes here are for the PWM regulator, fixing
  bootstrapping issues on some platforms where the hardware setup looked
  like it was out of spec for the constraints we have for the regulator
  causing us to make spurious and unhelpful changes to try to bring
  things in line with the constraints.

  There's also a couple of other driver specific fixes"

* tag 'regulator-fix-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator (max5970): Fix IRQ handler
  regulator: ti-abb: don't use devm_platform_ioremap_resource_byname for shared interrupt register
  regulator: pwm-regulator: Manage boot-on with disabled PWM channels
  regulator: pwm-regulator: Calculate the output voltage for disabled PWMs
  regulator: pwm-regulator: Add validity checks in continuous .get_voltage

Pull crypto fixes from Herbert Xu:
 "Fix regressions in caam and qat"

* tag 'v6.8-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: caam - fix asynchronous hash
  crypto: qat - fix arbiter mapping generation algorithm for QAT 402xx

Pull lsm fixes from Paul Moore:
 "Two small patches to fix some problems relating to LSM hook return
  values and how the individual LSMs interact"

* tag 'lsm-pr-20240131' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  lsm: fix default return value of the socket_getpeersec_*() hooks
  lsm: fix the logic in security_inode_getsecctx()

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

 - fix a timeout issue and a memory leak in batman-adv multicast,
   by Linus Lüssing (2 patches)

* tag 'batadv-net-pullrequest-20240201' of git://git.open-mesh.org/linux-merge:
  batman-adv: mcast: fix memory leak on deleting a batman-adv interface
  batman-adv: mcast: fix mcast packet type counter on timeouted nodes
====================

Link: https://lore.kernel.org/r/20240201110110.29129-1-sw@simonwunderlich.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

IFLA_DPLL_PIN was added to rt_link messages but not to the spec, which
breaks ynl. Add the missing definitions to the rt_link ynl spec.

Fixes: 5f184269 ("netdev: expose DPLL pin handle for netdevice")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240201113853.37432-1-donald.hunter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) TCP conntrack now only evaluates window negotiation for packets in
   the REPLY direction, from Ryan Schaefer. Otherwise SYN retransmissions
   trigger incorrect window scale negotiation. From Ryan Schaefer.

2) Restrict tunnel objects to NFPROTO_NETDEV which is where it makes sense
   to use this object type.

3) Fix conntrack pick up from the middle of SCTP_CID_SHUTDOWN_ACK packets.
   From Xin Long.

4) Another attempt from Jozsef Kadlecsik to address the slow down of the
   swap command in ipset.

5) Replace a BUG_ON by WARN_ON_ONCE in nf_log, and consolidate check for
   the case that the logger is NULL from the read side lock section.

6) Address lack of sanitization for custom expectations. Restrict layer 3
   and 4 families to what it is supported by userspace.

* tag 'nf-24-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nft_ct: sanitize layer 3 and 4 protocol number in custom expectations
  netfilter: nf_log: replace BUG_ON by WARN_ON_ONCE when putting logger
  netfilter: ipset: fix performance regression in swap operation
  netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new
  netfilter: nf_tables: restrict tunnel object to NFPROTO_NETDEV
  netfilter: conntrack: correct window scaling with retransmitted SYN
====================

Link: https://lore.kernel.org/r/20240131225943.7536-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In the arm random config file, kconfig option 'CONFIG_AEABI' is
disabled which results in adding the compiler flag '-mabi=apcs-gnu'.
This causes the compiler to add padding in virtchnl2_ptype
structure to align it to 8 bytes, resulting in the following
size check failure:

include/linux/build_bug.h:78:41: error: static assertion failed: "(6) == sizeof(struct virtchnl2_ptype)"
      78 | #define __static_assert(expr, msg, ...) _Static_assert(expr, msg)
         |                                         ^~~~~~~~~~~~~~
include/linux/build_bug.h:77:34: note: in expansion of macro '__static_assert'
      77 | #define static_assert(expr, ...) __static_assert(expr, ##__VA_ARGS__, #expr)
         |                                  ^~~~~~~~~~~~~~~
drivers/net/ethernet/intel/idpf/virtchnl2.h:26:9: note: in expansion of macro 'static_assert'
      26 |         static_assert((n) == sizeof(struct X))
         |         ^~~~~~~~~~~~~
drivers/net/ethernet/intel/idpf/virtchnl2.h:982:1: note: in expansion of macro 'VIRTCHNL2_CHECK_STRUCT_LEN'
     982 | VIRTCHNL2_CHECK_STRUCT_LEN(6, virtchnl2_ptype);
         | ^~~~~~~~~~~~~~~~~~~~~~~~~~

Avoid the compiler padding by using "__packed" structure
attribute for the virtchnl2_ptype struct. Also align the
structure by using "__aligned(2)" for better code optimization.

Fixes: 0d7502a9 ("virtchnl: add virtchnl version 2 ops")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312220250.ufEm8doQ-lkp@intel.comReviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh  <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240131222241.2087516-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Matthieu Baerts says:

====================
mptcp: fixes for recent issues reported by CI's

This series of 9 patches fixes issues mostly identified by CI's not
managed by the MPTCP maintainers. Thank you Linero (LKFT) and Netdev
maintainers (NIPA) for running our kunit and selftests tests!

For the first patch, it took a bit of time to identify the root cause.
Some MPTCP Join selftest subtests have been "flaky", mostly in slow
environments. It appears to be due to the use of a TCP-specific helper
on an MPTCP socket. A fix for kernels >= v5.15.

Patches 2 to 4 add missing kernel config to support NetFilter tables
needed for IPTables commands. These kconfigs are usually enabled in
default configurations, but apparently not for all architectures.
Patches 2 and 3 can be backported up to v5.11 and the 4th one up to
v5.19.

Patch 5 increases the time limit for MPTCP selftests. It appears that
many CI's execute tests in a VM without acceleration supports, e.g. QEmu
without KVM. As a result, the tests take longer. Plus, there are more
and more tests. This patch modifies the timeout added in v5.18.

Patch 6 reduces the maximum rate and delay of the different links in
some Simult Flows selftest subtests. The goal is to let slow VMs reach
the maximum speed. The original rate was introduced in v5.11.

Patch 7 lets CI changing the prefix of the subtests titles, to be able
to run the same selftest multiple times with different parameters. With
different titles, tests will be considered as different and not override
previous results as it is the case with some CI envs. Subtests have been
introduced in v6.6.

Patch 8 and 9 make some MPTCP Join selftest subtests quicker by stopping
the transfer when the expected events have been seen. Patch 8 can be
backported up to v6.5.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
====================

Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-0-4c1c11e571ff@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since the "Fixes" commits mentioned below, the newly added "userspace
pm" subtests of mptcp_join selftests are launching the whole transfer in
the background, do the required checks, then wait for the end of
transfer.

There is no need to wait longer, especially because the checks at the
end of the transfer are ignored (which is fine). This saves quite a few
seconds on slow environments.

While at it, use 'mptcp_lib_kill_wait()' helper everywhere, instead of
on a specific one with 'kill_tests_wait()'.

Fixes: b2e2248f ("selftests: mptcp: userspace pm create id 0 subflow")
Fixes: e3b47e46 ("selftests: mptcp: userspace pm remove initial subflow")
Fixes: b9fb1760 ("selftests: mptcp: userspace pm send RM_ADDR for ID 0")
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-9-4c1c11e571ff@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since the "Fixes" commit mentioned below, "userspace pm" subtests of
mptcp_join selftests introduced in v6.5 are launching the whole transfer
in the background, do the required checks, then wait for the end of
transfer.

There is no need to wait longer, especially because the checks at the
end of the transfer are ignored (which is fine). This saves quite a few
seconds in slow environments.

Note that old versions will need commit bdbef0a6 ("selftests: mptcp:
add mptcp_lib_kill_wait") as well to get 'mptcp_lib_kill_wait()' helper.

Fixes: 4369c198 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org # 6.5.x: bdbef0a6: selftests: mptcp: add mptcp_lib_kill_wait
Cc: stable@vger.kernel.org # 6.5.x
Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-8-4c1c11e571ff@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If a CI executes the same selftest multiple times with different
options, all results from the same subtests will have the same title,
which confuse the CI. With the same title printed in TAP, the tests are
considered as the same ones.

Now, it is possible to override this prefix by using MPTCP_LIB_KSFT_TEST
env var, and have a different title.

While at it, use 'basename' to remove the suffix as well instead of
using an extra 'sed'.

Fixes: c4192967 ("selftests: mptcp: lib: format subtests results in TAP")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-7-4c1c11e571ff@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When running the simult_flow selftest in slow environments -- e.g. QEmu
without KVM support --, the results can be unstable. This selftest
checks if the aggregated bandwidth is (almost) fully used as expected.

To help improving the stability while still keeping the same validation
in place, the BW and the delay are reduced to lower the pressure on the
CPU.

Fixes: 1a418cb8 ("mptcp: simult flow self-tests")
Fixes: 219d0499 ("mptcp: push pending frames when subflow has free space")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-6-4c1c11e571ff@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On very slow environments -- e.g. when QEmu is used without KVM --,
mptcp_join.sh selftest can take a bit more than 20 minutes. Bump the
default timeout by 50% as it seems normal to take that long on some
environments.

When a debug kernel config is used, this selftest will take even longer,
but that's certainly not a common test env to consider for the timeout.

The Fixes tag that has been picked here is there simply to help having
this patch backported to older stable versions. It is difficult to point
to the exact commit that made some env reaching the timeout from time to
time.

Fixes: d17b968b ("selftests: mptcp: increase timeout to 20 minutes")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-5-4c1c11e571ff@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Mangle table, only in IPv4.

This KConfig is usually enabled by default in many defconfig, but we
recently noticed that some CI were running our selftests without them
enabled.

Fixes: b6e074e1 ("selftests: mptcp: add infinite map testcase")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-4-4c1c11e571ff@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Filter table for IPv6.

It is then required to have IP6_NF_FILTER KConfig.

This KConfig is usually enabled by default in many defconfig, but we
recently noticed that some CI were running our selftests without them
enabled.

Fixes: 523514ed ("selftests: mptcp: add ADD_ADDR IPv6 test cases")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-3-4c1c11e571ff@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Filter table.

It is then required to have IP_NF_FILTER KConfig.

This KConfig is usually enabled by default in many defconfig, but we
recently noticed that some CI were running our selftests without them
enabled.

Fixes: 8d014eaa ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When the MPTCP PM detects that a subflow is stale, all the packet
scheduler must re-inject all the mptcp-level unacked data. To avoid
acquiring unneeded locks, it first try to check if any unacked data
is present at all in the RTX queue, but such check is currently
broken, as it uses TCP-specific helper on an MPTCP socket.

Funnily enough fuzzers and static checkers are happy, as the accessed
memory still belongs to the mptcp_sock struct, and even from a
functional perspective the recovery completed successfully, as
the short-cut test always failed.

A recent unrelated TCP change - commit d5fed5ad ("tcp: reorganize
tcp_sock fast path variables") - exposed the issue, as the tcp field
reorganization makes the mptcp code always skip the re-inection.

Fix the issue dropping the bogus call: we are on a slow path, the early
optimization proved once again to be evil.

Fixes: 1e1d9d6f ("mptcp: handle pending data on closed subflow")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/468Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-1-4c1c11e571ff@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The rtnetlink tests require additional options currently
off by default.

Fixes: 2766a111 ("selftests: rtnetlink: add ipsec offload API test")
Fixes: 5e596ee1 ("selftests: add xfrm state-policy-monitor to rtnetlink.sh")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/9048ca58e49b962f35dba1dfb2beaf3dab3e0411.1706723341.git.pabeni@redhat.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

amt test uses the TTL iptables module:

  ip netns exec "${RELAY}" iptables -t mangle -I PREROUTING \
  	-d 239.0.0.1 -j TTL --ttl-set 2

Fixes: c08e8bae ("selftests: add amt interface selftest script")
Link: https://lore.kernel.org/r/20240131165605.4051645-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Benjamin Poirier says:

====================
selftests: net: More small fixes

Some small fixes for net selftests which follow from these recent commits:
dd2d40ac ("selftests: bonding: Add more missing config options")
49078c1b ("selftests: forwarding: Remove executable bits from lib.sh")
====================

Link: https://lore.kernel.org/r/20240131140848.360618-1-bpoirier@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some scripts are not tests themselves; they contain utility functions used
by other tests. According to Documentation/dev-tools/kselftest.rst, such
files should be listed in TEST_FILES. Currently they are incorrectly listed
in TEST_PROGS_EXTENDED so rename the variable.

Fixes: c085dbfb ("selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED")
Suggested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-6-bpoirier@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some scripts are not tests themselves; they contain utility functions used
by other tests. According to Documentation/dev-tools/kselftest.rst, such
files should be listed in TEST_FILES. Move those utility scripts to
TEST_FILES.

Fixes: 1751eb42 ("selftests: net: use TEST_PROGS_EXTENDED")
Fixes: 25ae948b ("selftests/net: add lib.sh")
Fixes: b99ac184 ("kselftests/net: add missed setup_loopback.sh/setup_veth.sh to Makefile")
Fixes: f5173fe3 ("selftests: net: included needed helper in the install targets")
Suggested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-5-bpoirier@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

setup_loopback.sh and net_helper.sh are meant to be sourced from other
scripts, not executed directly. Therefore, remove the executable bits from
those files' permissions.

This change is similar to commit 49078c1b ("selftests: forwarding:
Remove executable bits from lib.sh")

Fixes: 7d157501 ("selftests/net: GRO coalesce test")
Fixes: 3bdd9fd2 ("selftests/net: synchronize udpgro tests' tx and rx connection")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-4-bpoirier@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The purpose of the test_LAG_cleanup() function is to check that some
hardware addresses are removed from underlying devices after they have been
unenslaved. The test function simply checks that those addresses are not
present at the end. However, if the addresses were never added to begin
with due to some error in device setup, the test function currently passes.
This is a false positive since in that situation the test did not actually
exercise the intended functionality.

Add a check that the expected addresses are indeed present after device
setup. This makes the test function more robust.

I noticed this problem when running the team/dev_addr_lists.sh test on a
system without support for dummy and ipv6:

tools/testing/selftests/drivers/net/team# ./dev_addr_lists.sh
Error: Unknown device type.
Error: Unknown device type.
This program is not intended to be run as root.
RTNETLINK answers: Operation not supported
TEST: team cleanup mode lacp                                        [ OK ]

Fixes: bbb774d9 ("net: Add tests for bonding and team address list management")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-3-bpoirier@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Similar to commit dd2d40ac ("selftests: bonding: Add more missing
config options"), add more networking-specific config options which are
needed for team device tests.

For testing, I used the minimal config generated by virtme-ng and I added
the options in the config file. Afterwards, the team device test passed.

Fixes: bbb774d9 ("net: Add tests for bonding and team address list management")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-2-bpoirier@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In commit ac504767 ("hv_netvsc: Disable NAPI before closing the
VMBus channel"), napi_disable was getting called for all channels,
including all subchannels without confirming if they are enabled or not.

This caused hv_netvsc getting hung at napi_disable, when netvsc_probe()
has finished running but nvdev->subchan_work has not started yet.
netvsc_subchan_work() -> rndis_set_subchannel() has not created the
sub-channels and because of that netvsc_sc_open() is not running.
netvsc_remove() calls cancel_work_sync(&nvdev->subchan_work), for which
netvsc_subchan_work did not run.

netif_napi_add() sets the bit NAPI_STATE_SCHED because it ensures NAPI
cannot be scheduled. Then netvsc_sc_open() -> napi_enable will clear the
NAPIF_STATE_SCHED bit, so it can be scheduled. napi_disable() does the
opposite.

Now during netvsc_device_remove(), when napi_disable is called for those
subchannels, napi_disable gets stuck on infinite msleep.

This fix addresses this problem by ensuring that napi_disable() is not
getting called for non-enabled NAPI struct.
But netif_napi_del() is still necessary for these non-enabled NAPI struct
for cleanup purpose.

Call trace:
[  654.559417] task:modprobe        state:D stack:    0 pid: 2321 ppid:  1091 flags:0x00004002
[  654.568030] Call Trace:
[  654.571221]  <TASK>
[  654.573790]  __schedule+0x2d6/0x960
[  654.577733]  schedule+0x69/0xf0
[  654.581214]  schedule_timeout+0x87/0x140
[  654.585463]  ? __bpf_trace_tick_stop+0x20/0x20
[  654.590291]  msleep+0x2d/0x40
[  654.593625]  napi_disable+0x2b/0x80
[  654.597437]  netvsc_device_remove+0x8a/0x1f0 [hv_netvsc]
[  654.603935]  rndis_filter_device_remove+0x194/0x1c0 [hv_netvsc]
[  654.611101]  ? do_wait_intr+0xb0/0xb0
[  654.615753]  netvsc_remove+0x7c/0x120 [hv_netvsc]
[  654.621675]  vmbus_remove+0x27/0x40 [hv_vmbus]

Cc: stable@vger.kernel.org
Fixes: ac504767 ("hv_netvsc: Disable NAPI before closing the VMBus channel")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/1706686551-28510-1-git-send-email-schakrabarti@linux.microsoft.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Invoking the make_tx_response() / push_tx_responses() pair with no lock
held would be acceptable only if all such invocations happened from the
same context (NAPI instance or dealloc thread). Since this isn't the
case, and since the interface "spec" also doesn't demand that multicast
operations may only be performed with no in-flight transmits,
MCAST_{ADD,DEL} processing also needs to acquire the response lock
around the invocations.

To prevent similar mistakes going forward, "downgrade" the present
functions to private helpers of just the two remaining ones using them
directly, with no forward declarations anymore. This involves renaming
what so far was make_tx_response(), for the new function of that name
to serve the new (wrapper) purpose.

While there,
- constify the txp parameters,
- correct xenvif_idx_release()'s status parameter's type,
- rename {,_}make_tx_response()'s status parameters for consistency with
  xenvif_idx_release()'s.

Fixes: 210c34dc ("xen-netback: add support for multicast control")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/980c6c3d-e10e-4459-8565-e8fbde122f00@suse.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The documentation is pointing to the wrong path for the interface.
Documentation is pointing to /sys/class/<iface>, instead of
/sys/class/net/<iface>.

Fix it by adding the `net/` directory before the interface.

Fixes: 1a02ef76 ("net: sysfs: add documentation entries for /sys/class/<iface>/queues")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240131102150.728960-2-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jiri Pirko says:

====================
dpll: expose lock status error value to user

From: Jiri Pirko <jiri@nvidia.com>

Allow to expose lock status errort value over new DPLL generic netlink
attribute. Extend the lock_status_get() op by new argument to get the
value from the driver. Implement this new argument fill-up
in mlx5 driver.
====================

Link: https://lore.kernel.org/r/20240130120831.261085-1-jiri@resnulli.usSigned-off-by: Paolo Abeni <pabeni@redhat.com>