This patch fixes CPT_LF_ALLOC mailbox error due to
incompatible mailbox message format. Specifically, it
corrects the `blkaddr` field type from `int` to `u8`.

Fixes: de2854c8 ("octeontx2-af: Mailbox changes for 98xx CPT block")
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace slot id with global CPT lf id on reg read/write as
CPTPF/VF driver would send slot number instead of global
lf id in the reg offset. And also update the mailbox response
with the global lf's register offset.

Fixes: ae454086 ("octeontx2-af: add mailbox interface for CPT")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove wrong EIO to EGAIN conversion and pass all errors as is.

After commit 230f3d53 ("i40e: remove i40e_status"), which should only
replace F/W specific error codes with Linux kernel generic, all EIO errors
suddenly started to be converted into EAGAIN which leads nvmupdate to retry
until it timeouts and sometimes fails after more than 20 minutes in the
middle of NVM update, so NVM becomes corrupted.

The bug affects users only at the time when they try to update NVM, and
only F/W versions that generate errors while nvmupdate. For example, X710DA2
with 0x8000ECB7 F/W is affected, but there are probably more...

Command for reproduction is just NVM update:
 ./nvmupdate64

In the log instead of:
 i40e_nvmupd_exec_aq err I40E_ERR_ADMIN_QUEUE_ERROR aq_err I40E_AQ_RC_ENOMEM)
appears:
 i40e_nvmupd_exec_aq err -EIO aq_err I40E_AQ_RC_ENOMEM
 i40e: eeprom check failed (-5), Tx/Rx traffic disabled

The problematic code did silently convert EIO into EAGAIN which forced
nvmupdate to ignore EAGAIN error and retry the same operation until timeout.
That's why NVM update takes 20+ minutes to finish with the fail in the end.

Fixes: 230f3d53 ("i40e: remove i40e_status")
Co-developed-by: Kelvin Kang <kelvin.kang@intel.com>
Signed-off-by: Kelvin Kang <kelvin.kang@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240710224455.188502-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When user submits a rxfh set command without touching XFRM_SYM_XOR,
rxfh.input_xfrm is set to RXH_XFRM_NO_CHANGE, which is equal to 0xff.

Testing if (rxfh.input_xfrm & RXH_XFRM_SYM_XOR &&
	    !ops->cap_rss_sym_xor_supported)
		return -EOPNOTSUPP;

Will always be true on devices that don't set cap_rss_sym_xor_supported,
since rxfh.input_xfrm & RXH_XFRM_SYM_XOR is always true, if input_xfrm
was not set, i.e RXH_XFRM_NO_CHANGE=0xff, which will result in failure
of any command that doesn't require any change of XFRM, e.g RSS context
or hash function changes.

To avoid this breakage, test if rxfh.input_xfrm != RXH_XFRM_NO_CHANGE
before testing other conditions. Note that the problem will only trigger
with XFRM-aware userspace, old ethtool CLI would continue to work.

Fixes: 0dd415d1 ("net: ethtool: add a NO_CHANGE uAPI for new RXFH's input_xfrm")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20240710225538.43368-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and netfilter.

  Current release - regressions:

   - core: fix rc7's __skb_datagram_iter() regression

  Current release - new code bugs:

   - eth: bnxt: fix crashes when reducing ring count with active RSS
     contexts

  Previous releases - regressions:

   - sched: fix UAF when resolving a clash

   - skmsg: skip zero length skb in sk_msg_recvmsg2

   - sunrpc: fix kernel free on connection failure in
     xs_tcp_setup_socket

   - tcp: avoid too many retransmit packets

   - tcp: fix incorrect undo caused by DSACK of TLP retransmit

   - udp: Set SOCK_RCU_FREE earlier in udp_lib_get_port().

   - eth: ks8851: fix deadlock with the SPI chip variant

   - eth: i40e: fix XDP program unloading while removing the driver

  Previous releases - always broken:

   - bpf:
       - fix too early release of tcx_entry
       - fail bpf_timer_cancel when callback is being cancelled
       - bpf: fix order of args in call to bpf_map_kvcalloc

   - netfilter: nf_tables: prefer nft_chain_validate

   - ppp: reject claimed-as-LCP but actually malformed packets

   - wireguard: avoid unaligned 64-bit memory accesses"

* tag 'net-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
  net, sunrpc: Remap EPERM in case of connection failure in xs_tcp_setup_socket
  net/sched: Fix UAF when resolving a clash
  net: ks8851: Fix potential TX stall after interface reopen
  udp: Set SOCK_RCU_FREE earlier in udp_lib_get_port().
  netfilter: nf_tables: prefer nft_chain_validate
  netfilter: nfnetlink_queue: drop bogus WARN_ON
  ethtool: netlink: do not return SQI value if link is down
  ppp: reject claimed-as-LCP but actually malformed packets
  selftests/bpf: Add timer lockup selftest
  net: ethernet: mtk-star-emac: set mac_managed_pm when probing
  e1000e: fix force smbus during suspend flow
  tcp: avoid too many retransmit packets
  bpf: Defer work in bpf_timer_cancel_and_free
  bpf: Fail bpf_timer_cancel when callback is being cancelled
  bpf: fix order of args in call to bpf_map_kvcalloc
  net: ethernet: lantiq_etop: fix double free in detach
  i40e: Fix XDP program unloading while removing the driver
  net: fix rc7's __skb_datagram_iter()
  net: ks8851: Fix deadlock with the SPI chip variant
  octeontx2-af: Fix incorrect value output on error path in rvu_check_rsrc_availability()
  ...

Pull vfs fixes from Christian Brauner:
 "cachefiles:

   - Export an existing and add a new cachefile helper to be used in
     filesystems to fix reference count bugs

   - Use the newly added fscache_ty_get_volume() helper to get a
     reference count on an fscache_volume to handle volumes that are
     about to be removed cleanly

   - After withdrawing a fscache_cache via FSCACHE_CACHE_IS_WITHDRAWN
     wait for all ongoing cookie lookups to complete and for the object
     count to reach zero

   - Propagate errors from vfs_getxattr() to avoid an infinite loop in
     cachefiles_check_volume_xattr() because it keeps seeing ESTALE

   - Don't send new requests when an object is dropped by raising
     CACHEFILES_ONDEMAND_OJBSTATE_DROPPING

   - Cancel all requests for an object that is about to be dropped

   - Wait for the ondemand_boject_worker to finish before dropping a
     cachefiles object to prevent use-after-free

   - Use cyclic allocation for message ids to better handle id recycling

   - Add missing lock protection when iterating through the xarray when
     polling

  netfs:

   - Use standard logging helpers for debug logging

  VFS:

   - Fix potential use-after-free in file locks during
     trace_posix_lock_inode(). The tracepoint could fire while another
     task raced it and freed the lock that was requested to be traced

   - Only increment the nr_dentry_negative counter for dentries that are
     present on the superblock LRU. Currently, DCACHE_LRU_LIST list is
     used to detect this case. However, the flag is also raised in
     combination with DCACHE_SHRINK_LIST to indicate that dentry->d_lru
     is used. So checking only DCACHE_LRU_LIST will lead to wrong
     nr_dentry_negative count. Fix the check to not count dentries that
     are on a shrink related list

  Misc:

   - hfsplus: fix an uninitialized value issue in copy_name

   - minix: fix minixfs_rename with HIGHMEM. It still uses kunmap() even
     though we switched it to kmap_local_page() a while ago"

* tag 'vfs-6.10-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  minixfs: Fix minixfs_rename with HIGHMEM
  hfsplus: fix uninit-value in copy_name
  vfs: don't mod negative dentry count when on shrinker list
  filelock: fix potential use-after-free in posix_lock_inode
  cachefiles: add missing lock protection when polling
  cachefiles: cyclic allocation of msg_id to avoid reuse
  cachefiles: wait for ondemand_object_worker to finish when dropping object
  cachefiles: cancel all requests for the object that is being dropped
  cachefiles: stop sending new request when dropping object
  cachefiles: propagate errors from vfs_getxattr() to avoid infinite loop
  cachefiles: fix slab-use-after-free in cachefiles_withdraw_cookie()
  cachefiles: fix slab-use-after-free in fscache_withdraw_volume()
  netfs, fscache: export fscache_put_volume() and add fscache_try_get_volume()
  netfs: Switch debug logging to pr_debug()

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following batch contains Netfilter fixes for net:

Patch #1 fixes a bogus WARN_ON splat in nfnetlink_queue.

Patch #2 fixes a crash due to stack overflow in chain loop detection
	 by using the existing chain validation routines

Both patches from Florian Westphal.

netfilter pull request 24-07-11

* tag 'nf-24-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: prefer nft_chain_validate
  netfilter: nfnetlink_queue: drop bogus WARN_ON
====================

Link: https://patch.msgid.link/20240711093948.3816-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Daniel Borkmann says:

====================
pull-request: bpf 2024-07-11

The following pull-request contains BPF updates for your *net* tree.

We've added 4 non-merge commits during the last 2 day(s) which contain
a total of 4 files changed, 262 insertions(+), 19 deletions(-).

The main changes are:

1) Fixes for a BPF timer lockup and a use-after-free scenario when timers
   are used concurrently, from Kumar Kartikeya Dwivedi.

2) Fix the argument order in the call to bpf_map_kvcalloc() which could
   otherwise lead to a compilation error, from Mohammad Shehar Yaar Tausif.

bpf-for-netdev

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Add timer lockup selftest
  bpf: Defer work in bpf_timer_cancel_and_free
  bpf: Fail bpf_timer_cancel when callback is being cancelled
  bpf: fix order of args in call to bpf_map_kvcalloc
====================

Link: https://patch.msgid.link/20240711084016.25757-1-daniel@iogearbox.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When using a BPF program on kernel_connect(), the call can return -EPERM. This
causes xs_tcp_setup_socket() to loop forever, filling up the syslog and causing
the kernel to potentially freeze up.

Neil suggested:

  This will propagate -EPERM up into other layers which might not be ready
  to handle it. It might be safer to map EPERM to an error we would be more
  likely to expect from the network system - such as ECONNREFUSED or ENETDOWN.

ECONNREFUSED as error seems reasonable. For programs setting a different error
can be out of reach (see handling in 4fbac77d) in particular on kernels
which do not have f10d0596 ("bpf: Make BPF_PROG_RUN_ARRAY return -err
instead of allow boolean"), thus given that it is better to simply remap for
consistent behavior. UDP does handle EPERM in xs_udp_send_request().

Fixes: d74bad4e ("bpf: Hooks for sys_connect")
Fixes: 4fbac77d ("bpf: Hooks for sys_bind")
Co-developed-by: Lex Siegel <usiegl00@gmail.com>
Signed-off-by: Lex Siegel <usiegl00@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <trondmy@kernel.org>
Cc: Anna Schumaker <anna@kernel.org>
Link: https://github.com/cilium/cilium/issues/33395
Link: https://lore.kernel.org/bpf/171374175513.12877.8993642908082014881@noble.neil.brown.name
Link: https://patch.msgid.link/9069ec1d59e4b2129fc23433349fd5580ad43921.1720075070.git.daniel@iogearbox.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

KASAN reports the following UAF:

 BUG: KASAN: slab-use-after-free in tcf_ct_flow_table_process_conn+0x12b/0x380 [act_ct]
 Read of size 1 at addr ffff888c07603600 by task handler130/6469

 Call Trace:
  <IRQ>
  dump_stack_lvl+0x48/0x70
  print_address_description.constprop.0+0x33/0x3d0
  print_report+0xc0/0x2b0
  kasan_report+0xd0/0x120
  __asan_load1+0x6c/0x80
  tcf_ct_flow_table_process_conn+0x12b/0x380 [act_ct]
  tcf_ct_act+0x886/0x1350 [act_ct]
  tcf_action_exec+0xf8/0x1f0
  fl_classify+0x355/0x360 [cls_flower]
  __tcf_classify+0x1fd/0x330
  tcf_classify+0x21c/0x3c0
  sch_handle_ingress.constprop.0+0x2c5/0x500
  __netif_receive_skb_core.constprop.0+0xb25/0x1510
  __netif_receive_skb_list_core+0x220/0x4c0
  netif_receive_skb_list_internal+0x446/0x620
  napi_complete_done+0x157/0x3d0
  gro_cell_poll+0xcf/0x100
  __napi_poll+0x65/0x310
  net_rx_action+0x30c/0x5c0
  __do_softirq+0x14f/0x491
  __irq_exit_rcu+0x82/0xc0
  irq_exit_rcu+0xe/0x20
  common_interrupt+0xa1/0xb0
  </IRQ>
  <TASK>
  asm_common_interrupt+0x27/0x40

 Allocated by task 6469:
  kasan_save_stack+0x38/0x70
  kasan_set_track+0x25/0x40
  kasan_save_alloc_info+0x1e/0x40
  __kasan_krealloc+0x133/0x190
  krealloc+0xaa/0x130
  nf_ct_ext_add+0xed/0x230 [nf_conntrack]
  tcf_ct_act+0x1095/0x1350 [act_ct]
  tcf_action_exec+0xf8/0x1f0
  fl_classify+0x355/0x360 [cls_flower]
  __tcf_classify+0x1fd/0x330
  tcf_classify+0x21c/0x3c0
  sch_handle_ingress.constprop.0+0x2c5/0x500
  __netif_receive_skb_core.constprop.0+0xb25/0x1510
  __netif_receive_skb_list_core+0x220/0x4c0
  netif_receive_skb_list_internal+0x446/0x620
  napi_complete_done+0x157/0x3d0
  gro_cell_poll+0xcf/0x100
  __napi_poll+0x65/0x310
  net_rx_action+0x30c/0x5c0
  __do_softirq+0x14f/0x491

 Freed by task 6469:
  kasan_save_stack+0x38/0x70
  kasan_set_track+0x25/0x40
  kasan_save_free_info+0x2b/0x60
  ____kasan_slab_free+0x180/0x1f0
  __kasan_slab_free+0x12/0x30
  slab_free_freelist_hook+0xd2/0x1a0
  __kmem_cache_free+0x1a2/0x2f0
  kfree+0x78/0x120
  nf_conntrack_free+0x74/0x130 [nf_conntrack]
  nf_ct_destroy+0xb2/0x140 [nf_conntrack]
  __nf_ct_resolve_clash+0x529/0x5d0 [nf_conntrack]
  nf_ct_resolve_clash+0xf6/0x490 [nf_conntrack]
  __nf_conntrack_confirm+0x2c6/0x770 [nf_conntrack]
  tcf_ct_act+0x12ad/0x1350 [act_ct]
  tcf_action_exec+0xf8/0x1f0
  fl_classify+0x355/0x360 [cls_flower]
  __tcf_classify+0x1fd/0x330
  tcf_classify+0x21c/0x3c0
  sch_handle_ingress.constprop.0+0x2c5/0x500
  __netif_receive_skb_core.constprop.0+0xb25/0x1510
  __netif_receive_skb_list_core+0x220/0x4c0
  netif_receive_skb_list_internal+0x446/0x620
  napi_complete_done+0x157/0x3d0
  gro_cell_poll+0xcf/0x100
  __napi_poll+0x65/0x310
  net_rx_action+0x30c/0x5c0
  __do_softirq+0x14f/0x491

The ct may be dropped if a clash has been resolved but is still passed to
the tcf_ct_flow_table_process_conn function for further usage. This issue
can be fixed by retrieving ct from skb again after confirming conntrack.

Fixes: 0cc254e5 ("net/sched: act_ct: Offload connections with commit action")
Co-developed-by: Gerald Yang <gerald.yang@canonical.com>
Signed-off-by: Gerald Yang <gerald.yang@canonical.com>
Signed-off-by: Chengen Du <chengen.du@canonical.com>
Link: https://patch.msgid.link/20240710053747.13223-1-chengen.du@canonical.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The amount of TX space in the hardware buffer is tracked in the tx_space
variable. The initial value is currently only set during driver probing.

After closing the interface and reopening it the tx_space variable has
the last value it had before close. If it is smaller than the size of
the first send packet after reopeing the interface the queue will be
stopped. The queue is woken up after receiving a TX interrupt but this
will never happen since we did not send anything.

This commit moves the initialization of the tx_space variable to the
ks8851_net_open function right before starting the TX queue. Also query
the value from the hardware instead of using a hard coded value.

Only the SPI chip variant is affected by this issue because only this
driver variant actually depends on the tx_space variable in the xmit
function.

Fixes: 3dc5d445 ("net: ks8851: Fix TX stall caused by TX buffer overrun")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240709195845.9089-1-rwahl@gmx.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

syzkaller triggered the warning [0] in udp_v4_early_demux().

In udp_v[46]_early_demux() and sk_lookup(), we do not touch the refcount
of the looked-up sk and use sock_pfree() as skb->destructor, so we check
SOCK_RCU_FREE to ensure that the sk is safe to access during the RCU grace
period.

Currently, SOCK_RCU_FREE is flagged for a bound socket after being put
into the hash table.  Moreover, the SOCK_RCU_FREE check is done too early
in udp_v[46]_early_demux() and sk_lookup(), so there could be a small race
window:

  CPU1                                 CPU2
  ----                                 ----
  udp_v4_early_demux()                 udp_lib_get_port()
  |                                    |- hlist_add_head_rcu()
  |- sk = __udp4_lib_demux_lookup()    |
  |- DEBUG_NET_WARN_ON_ONCE(sk_is_refcounted(sk));
                                       `- sock_set_flag(sk, SOCK_RCU_FREE)

We had the same bug in TCP and fixed it in commit 871019b2 ("net:
set SOCK_RCU_FREE before inserting socket into hashtable").

Let's apply the same fix for UDP.

[0]:
WARNING: CPU: 0 PID: 11198 at net/ipv4/udp.c:2599 udp_v4_early_demux+0x481/0xb70 net/ipv4/udp.c:2599
Modules linked in:
CPU: 0 PID: 11198 Comm: syz-executor.1 Not tainted 6.9.0-g93bda330 #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:udp_v4_early_demux+0x481/0xb70 net/ipv4/udp.c:2599
Code: c5 7a 15 fe bb 01 00 00 00 44 89 e9 31 ff d3 e3 81 e3 bf ef ff ff 89 de e8 2c 74 15 fe 85 db 0f 85 02 06 00 00 e8 9f 7a 15 fe <0f> 0b e8 98 7a 15 fe 49 8d 7e 60 e8 4f 39 2f fe 49 c7 46 60 20 52
RSP: 0018:ffffc9000ce3fa58 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8318c92c
RDX: ffff888036ccde00 RSI: ffffffff8318c2f1 RDI: 0000000000000001
RBP: ffff88805a2dd6e0 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0001ffffffffffff R12: ffff88805a2dd680
R13: 0000000000000007 R14: ffff88800923f900 R15: ffff88805456004e
FS:  00007fc449127640(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc449126e38 CR3: 000000003de4b002 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
PKRU: 55555554
Call Trace:
 <TASK>
 ip_rcv_finish_core.constprop.0+0xbdd/0xd20 net/ipv4/ip_input.c:349
 ip_rcv_finish+0xda/0x150 net/ipv4/ip_input.c:447
 NF_HOOK include/linux/netfilter.h:314 [inline]
 NF_HOOK include/linux/netfilter.h:308 [inline]
 ip_rcv+0x16c/0x180 net/ipv4/ip_input.c:569
 __netif_receive_skb_one_core+0xb3/0xe0 net/core/dev.c:5624
 __netif_receive_skb+0x21/0xd0 net/core/dev.c:5738
 netif_receive_skb_internal net/core/dev.c:5824 [inline]
 netif_receive_skb+0x271/0x300 net/core/dev.c:5884
 tun_rx_batched drivers/net/tun.c:1549 [inline]
 tun_get_user+0x24db/0x2c50 drivers/net/tun.c:2002
 tun_chr_write_iter+0x107/0x1a0 drivers/net/tun.c:2048
 new_sync_write fs/read_write.c:497 [inline]
 vfs_write+0x76f/0x8d0 fs/read_write.c:590
 ksys_write+0xbf/0x190 fs/read_write.c:643
 __do_sys_write fs/read_write.c:655 [inline]
 __se_sys_write fs/read_write.c:652 [inline]
 __x64_sys_write+0x41/0x50 fs/read_write.c:652
 x64_sys_call+0xe66/0x1990 arch/x86/include/generated/asm/syscalls_64.h:2
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x4b/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fc44a68bc1f
Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 e9 cf f5 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 3c d0 f5 ff 48
RSP: 002b:00007fc449126c90 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00000000004bc050 RCX: 00007fc44a68bc1f
RDX: 0000000000000032 RSI: 00000000200000c0 RDI: 00000000000000c8
RBP: 00000000004bc050 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000032 R11: 0000000000000293 R12: 0000000000000000
R13: 000000000000000b R14: 00007fc44a5ec530 R15: 0000000000000000
 </TASK>

Fixes: 6acc9b43 ("bpf: Add helper to retrieve socket in BPF")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240709191356.24010-1-kuniyu@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

nft_chain_validate already performs loop detection because a cycle will
result in a call stack overflow (ctx->level >= NFT_JUMP_STACK_SIZE).

It also follows maps via ->validate callback in nft_lookup, so there
appears no reason to iterate the maps again.

nf_tables_check_loops() and all its helper functions can be removed.
This improves ruleset load time significantly, from 23s down to 12s.

This also fixes a crash bug. Old loop detection code can result in
unbounded recursion:

BUG: TASK stack guard page was hit at ....
Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN
CPU: 4 PID: 1539 Comm: nft Not tainted 6.10.0-rc5+ #1
[..]

with a suitable ruleset during validation of register stores.

I can't see any actual reason to attempt to check for this from
nft_validate_register_store(), at this point the transaction is still in
progress, so we don't have a full picture of the rule graph.

For nf-next it might make sense to either remove it or make this depend
on table->validate_state in case we could catch an error earlier
(for improved error reporting to userspace).

Fixes: 20a69341 ("netfilter: nf_tables: add netlink set API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Happens when rules get flushed/deleted while packet is out, so remove
this WARN_ON.

This WARN exists in one form or another since v4.14, no need to backport
this to older releases, hence use a more recent fixes tag.

Fixes: 3f801968 ("netfilter: move nf_reinject into nfnetlink_queue modules")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202407081453.11ac0f63-lkp@intel.comSigned-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Do not attach SQI value if link is down. "SQI values are only valid if
link-up condition is present" per OpenAlliance specification of
100Base-T1 Interoperability Test suite [1]. The same rule would apply
for other link types.

[1] https://opensig.org/automotive-ethernet-specifications/#

Fixes: 80660219 ("ethtool: provide UAPI for PHY Signal Quality Index (SQI)")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Woojung Huh <woojung.huh@microchip.com>
Link: https://patch.msgid.link/20240709061943.729381-1-o.rempel@pengutronix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Since 'ppp_async_encode()' assumes valid LCP packets (with code
from 1 to 7 inclusive), add 'ppp_check_packet()' to ensure that
LCP packet has an actual body beyond PPP_LCP header bytes, and
reject claimed-as-LCP but actually malformed data otherwise.

Reported-by: syzbot+ec0723ba9605678b14bf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ec0723ba9605678b14bf
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add a selftest that tries to trigger a situation where two timer callbacks
are attempting to cancel each other's timer. By running them continuously,
we hit a condition where both run in parallel and cancel each other.

Without the fix in the previous patch, this would cause a lockup as
hrtimer_cancel on either side will wait for forward progress from the
callback.

Ensure that this situation leads to a EDEADLK error.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240711052709.2148616-1-memxor@gmail.com

The below commit introduced a warning message when phy state is not in
the states: PHY_HALTED, PHY_READY, and PHY_UP.
commit 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")

mtk-star-emac doesn't need mdiobus suspend/resume. To fix the warning
message during resume, indicate the phy resume/suspend is managed by the
mac when probing.

Fixes: 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Signed-off-by: Jian Hui Lee <jianhui.lee@canonical.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240708065210.4178980-1-jianhui.lee@canonical.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Commit 861e8086 ("e1000e: move force SMBUS from enable ulp function
to avoid PHY loss issue") resolved a PHY access loss during suspend on
Meteor Lake consumer platforms, but it affected corporate systems
incorrectly.

A better fix, working for both consumer and corporate systems, was
proposed in commit bfd546a5 ("e1000e: move force SMBUS near the end
of enable_ulp function"). However, it introduced a regression on older
devices, such as [8086:15B8], [8086:15F9], [8086:15BE].

This patch aims to fix the secondary regression, by limiting the scope of
the changes to Meteor Lake platforms only.

Fixes: bfd546a5 ("e1000e: move force SMBUS near the end of enable_ulp function")
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218940Reported-by: Dieter Mummenschanz <dmummenschanz@web.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218936Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240709203123.2103296-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If a TCP socket is using TCP_USER_TIMEOUT, and the other peer
retracted its window to zero, tcp_retransmit_timer() can
retransmit a packet every two jiffies (2 ms for HZ=1000),
for about 4 minutes after TCP_USER_TIMEOUT has 'expired'.

The fix is to make sure tcp_rtx_probe0_timed_out() takes
icsk->icsk_user_timeout into account.

Before blamed commit, the socket would not timeout after
icsk->icsk_user_timeout, but would use standard exponential
backoff for the retransmits.

Also worth noting that before commit e89688e3 ("net: tcp:
fix unexcepted socket die when snd_wnd is 0"), the issue
would last 2 minutes instead of 4.

Fixes: b701a99e ("tcp: Add tcp_clamp_rto_to_user_timeout() helper to improve accuracy")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Jon Maxwell <jmaxwell37@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240710001402.2758273-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kumar Kartikeya Dwivedi says:

====================
Fixes for BPF timer lockup and UAF

The following patches contain fixes for timer lockups and a
use-after-free scenario.

This set proposes to fix the following lockup situation for BPF timers.

CPU 1					CPU 2

bpf_timer_cb				bpf_timer_cb
  timer_cb1				  timer_cb2
    bpf_timer_cancel(timer_cb2)		    bpf_timer_cancel(timer_cb1)
      hrtimer_cancel			      hrtimer_cancel

In this case, both callbacks will continue waiting for each other to
finish synchronously, causing a lockup.

The proposed fix adds support for tracking in-flight cancellations
*begun by other timer callbacks* for a particular BPF timer.  Whenever
preparing to call hrtimer_cancel, a callback will increment the target
timer's counter, then inspect its in-flight cancellations, and if
non-zero, return -EDEADLK to avoid situations where the target timer's
callback is waiting for its completion.

This does mean that in cases where a callback is fired and cancelled, it
will be unable to cancel any timers in that execution. This can be
alleviated by maintaining the list of waiting callbacks in bpf_hrtimer
and searching through it to avoid interdependencies, but this may
introduce additional delays in bpf_timer_cancel, in addition to
requiring extra state at runtime which may need to be allocated or
reused from bpf_hrtimer storage. Moreover, extra synchronization is
needed to delete these elements from the list of waiting callbacks once
hrtimer_cancel has finished.

The second patch is for a deadlock situation similar to above in
bpf_timer_cancel_and_free, but also a UAF scenario that can occur if
timer is armed before entering it, if hrtimer_running check causes the
hrtimer_cancel call to be skipped.

As seen above, synchronous hrtimer_cancel would lead to deadlock (if
same callback tries to free its timer, or two timers free each other),
therefore we queue work onto the global workqueue to ensure outstanding
timers are cancelled before bpf_hrtimer state is freed.

Further details are in the patches.
====================

Link: https://lore.kernel.org/r/20240709185440.1104957-1-memxor@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Currently, the same case as previous patch (two timer callbacks trying
to cancel each other) can be invoked through bpf_map_update_elem as
well, or more precisely, freeing map elements containing timers. Since
this relies on hrtimer_cancel as well, it is prone to the same deadlock
situation as the previous patch.

It would be sufficient to use hrtimer_try_to_cancel to fix this problem,
as the timer cannot be enqueued after async_cancel_and_free. Once
async_cancel_and_free has been done, the timer must be reinitialized
before it can be armed again. The callback running in parallel trying to
arm the timer will fail, and freeing bpf_hrtimer without waiting is
sufficient (given kfree_rcu), and bpf_timer_cb will return
HRTIMER_NORESTART, preventing the timer from being rearmed again.

However, there exists a UAF scenario where the callback arms the timer
before entering this function, such that if cancellation fails (due to
timer callback invoking this routine, or the target timer callback
running concurrently). In such a case, if the timer expiration is
significantly far in the future, the RCU grace period expiration
happening before it will free the bpf_hrtimer state and along with it
the struct hrtimer, that is enqueued.

Hence, it is clear cancellation needs to occur after
async_cancel_and_free, and yet it cannot be done inline due to deadlock
issues. We thus modify bpf_timer_cancel_and_free to defer work to the
global workqueue, adding a work_struct alongside rcu_head (both used at
_different_ points of time, so can share space).

Update existing code comments to reflect the new state of affairs.

Fixes: b00628b1 ("bpf: Introduce bpf timers.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240709185440.1104957-3-memxor@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Given a schedule:

timer1 cb			timer2 cb

bpf_timer_cancel(timer2);	bpf_timer_cancel(timer1);

Both bpf_timer_cancel calls would wait for the other callback to finish
executing, introducing a lockup.

Add an atomic_t count named 'cancelling' in bpf_hrtimer. This keeps
track of all in-flight cancellation requests for a given BPF timer.
Whenever cancelling a BPF timer, we must check if we have outstanding
cancellation requests, and if so, we must fail the operation with an
error (-EDEADLK) since cancellation is synchronous and waits for the
callback to finish executing. This implies that we can enter a deadlock
situation involving two or more timer callbacks executing in parallel
and attempting to cancel one another.

Note that we avoid incrementing the cancelling counter for the target
timer (the one being cancelled) if bpf_timer_cancel is not invoked from
a callback, to avoid spurious errors. The whole point of detecting
cur->cancelling and returning -EDEADLK is to not enter a busy wait loop
(which may or may not lead to a lockup). This does not apply in case the
caller is in a non-callback context, the other side can continue to
cancel as it sees fit without running into errors.

Background on prior attempts:

Earlier versions of this patch used a bool 'cancelling' bit and used the
following pattern under timer->lock to publish cancellation status.

lock(t->lock);
t->cancelling = true;
mb();
if (cur->cancelling)
	return -EDEADLK;
unlock(t->lock);
hrtimer_cancel(t->timer);
t->cancelling = false;

The store outside the critical section could overwrite a parallel
requests t->cancelling assignment to true, to ensure the parallely
executing callback observes its cancellation status.

It would be necessary to clear this cancelling bit once hrtimer_cancel
is done, but lack of serialization introduced races. Another option was
explored where bpf_timer_start would clear the bit when (re)starting the
timer under timer->lock. This would ensure serialized access to the
cancelling bit, but may allow it to be cleared before in-flight
hrtimer_cancel has finished executing, such that lockups can occur
again.

Thus, we choose an atomic counter to keep track of all outstanding
cancellation requests and use it to prevent lockups in case callbacks
attempt to cancel each other while executing in parallel.
Reported-by: Dohyun Kim <dohyunkim@google.com>
Reported-by: Neel Natu <neelnatu@google.com>
Fixes: b00628b1 ("bpf: Introduce bpf timers.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240709185440.1104957-2-memxor@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The original function call passed size of smap->bucket before the number of
buckets which raises the error 'calloc-transposed-args' on compilation.

Vlastimil Babka added:

The order of parameters can be traced back all the way to 6ac99e8f
("bpf: Introduce bpf sk local storage") accross several refactorings,
and that's why the commit is used as a Fixes: tag.

In v6.10-rc1, a different commit 2c321f3f ("mm: change inlined
allocation helpers to account at the call site") however exposed the
order of args in a way that gcc-14 has enough visibility to start
warning about it, because (in !CONFIG_MEMCG case) bpf_map_kvcalloc is
then a macro alias for kvcalloc instead of a static inline wrapper.

To sum up the warning happens when the following conditions are all met:

- gcc-14 is used (didn't see it with gcc-13)
- commit 2c321f3f is present
- CONFIG_MEMCG is not enabled in .config
- CONFIG_WERROR turns this from a compiler warning to error

Fixes: 6ac99e8f ("bpf: Introduce bpf sk local storage")
Reviewed-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20240710100521.15061-2-vbabka@suse.czSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Merge tag 'mm-hotfixes-stable-2024-07-10-13-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "21 hotfixes, 15 of which are cc:stable.

  No identifiable theme here - all are singleton patches, 19 are for MM"

* tag 'mm-hotfixes-stable-2024-07-10-13-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
  mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
  mm/hugetlb: fix potential race in __update_and_free_hugetlb_folio()
  filemap: replace pte_offset_map() with pte_offset_map_nolock()
  arch/xtensa: always_inline get_current() and current_thread_info()
  sched.h: always_inline alloc_tag_{save|restore} to fix modpost warnings
  MAINTAINERS: mailmap: update Lorenzo Stoakes's email address
  mm: fix crashes from deferred split racing folio migration
  lib/build_OID_registry: avoid non-destructive substitution for Perl < 5.13.2 compat
  mm: gup: stop abusing try_grab_folio
  nilfs2: fix kernel bug on rename operation of broken directory
  mm/hugetlb_vmemmap: fix race with speculative PFN walkers
  cachestat: do not flush stats in recency check
  mm/shmem: disable PMD-sized page cache if needed
  mm/filemap: skip to create PMD-sized page cache if needed
  mm/readahead: limit page cache size in page_cache_ra_order()
  mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray
  mm/damon/core: merge regions aggressively when max_nr_regions is unmet
  Fix userfaultfd_api to return EINVAL as expected
  mm: vmalloc: check if a hash-index is in cpu_possible_mask
  mm: prevent derefencing NULL ptr in pfn_section_valid()
  ...

Pull SCSI fixes from James Bottomley:
 "One core change that moves a disk start message to a location where it
  will only be printed once instead of twice plus a couple of error
  handling race fixes in the ufs driver"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Do not repeat the starting disk message
  scsi: ufs: core: Fix ufshcd_abort_one racing issue
  scsi: ufs: core: Fix ufshcd_clear_cmd racing issue

Pull VFIO fix from Alex Williamson:

 - Recent stable backports are exposing a bug introduced in the v6.10
   development cycle where a counter value is uninitialized.  This leads
   to regressions in userspace drivers like QEMU where where the kernel
   might ask for an arbitrary buffer size or return out of memory itself
   based on a bogus value.  Zero initialize the counter.  (Yi Liu)

* tag 'vfio-v6.10' of https://github.com/awilliam/linux-vfio:
  vfio/pci: Init the count variable in collecting hot-reset devices

Pull bcachefs fixes from Kent Overstreet:

 - Switch some asserts to WARN()

 - Fix a few "transaction not locked" asserts in the data read retry
   paths and backpointers gc

 - Fix a race that would cause the journal to get stuck on a flush
   commit

 - Add missing fsck checks for the fragmentation LRU

 - The usual assorted ssorted syzbot fixes

* tag 'bcachefs-2024-07-10' of https://evilpiepirate.org/git/bcachefs: (22 commits)
  bcachefs: Add missing bch2_trans_begin()
  bcachefs: Fix missing error check in journal_entry_btree_keys_validate()
  bcachefs: Warn on attempting a move with no replicas
  bcachefs: bch2_data_update_to_text()
  bcachefs: Log mount failure error code
  bcachefs: Fix undefined behaviour in eytzinger1_first()
  bcachefs: Mark bch_inode_info as SLAB_ACCOUNT
  bcachefs: Fix bch2_inode_insert() race path for tmpfiles
  closures: fix closure_sync + closure debugging
  bcachefs: Fix journal getting stuck on a flush commit
  bcachefs: io clock: run timer fns under clock lock
  bcachefs: Repair fragmentation_lru in alloc_write_key()
  bcachefs: add check for missing fragmentation in check_alloc_to_lru_ref()
  bcachefs: bch2_btree_write_buffer_maybe_flush()
  bcachefs: Add missing printbuf_tabstops_reset() calls
  bcachefs: Fix loop restart in bch2_btree_transactions_read()
  bcachefs: Fix bch2_read_retry_nodecode()
  bcachefs: Don't use the new_fs() bucket alloc path on an initialized fs
  bcachefs: Fix shift greater than integer size
  bcachefs: Change bch2_fs_journal_stop() BUG_ON() to warning
  ...

Merge tag 'platform-drivers-x86-v6.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fix from Hans de Goede:
 "One-liner fix for a dmi_system_id array in the toshiba_acpi driver not
  being terminated properly.

  Something which somehow has escaped detection since being introduced
  in 2022 until now"

* tag 'platform-drivers-x86-v6.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: toshiba_acpi: Fix array out-of-bounds access

Pull ACPI fix from Rafael Wysocki:
 "Fix the sorting of _CST output data in the ACPI processor idle driver
  (Kuan-Wei Chiu)"

* tag 'acpi-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: processor_idle: Fix invalid comparison with insertion sort for latency

Pull power management fixes from Rafael Wysocki:
 "Fix two issues related to boost frequencies handling, one in the
  cpufreq core and one in the ACPI cpufreq driver (Mario Limonciello)"

* tag 'pm-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: ACPI: Mark boost policy as enabled when setting boost
  cpufreq: Allow drivers to advertise boost enabled

Pull thermal control fixes from Rafael Wysocki:
 "These fix a possible NULL pointer dereference in a thermal governor,
  fix up the handling of thermal zones enabled before their temperature
  can be determined and fix list sorting during thermal zone temperature
  updates.

  Specifics:

   - Prevent the Power Allocator thermal governor from dereferencing a
     NULL pointer if it is bound to a tripless thermal zone (Nícolas
     Prado)

   - Prevent thermal zones enabled too early from staying effectively
     dormant forever because their temperature cannot be determined
     initially (Rafael Wysocki)

   - Fix list sorting during thermal zone temperature updates to ensure
     the proper ordering of trip crossing notifications (Rafael
     Wysocki)"

* tag 'thermal-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: Fix list sorting in __thermal_zone_device_update()
  thermal: core: Call monitor_thermal_zone() if zone temperature is invalid
  thermal: gov_power_allocator: Return early in manage if trip_max is NULL

Pull devicetree fix from Rob Herring:

 - One fix for PASemi Nemo board interrupts

* tag 'devicetree-fixes-for-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of/irq: Disable "interrupt-map" parsing for PASEMI Nemo

The count variable is used without initialization, it results in mistakes
in the device counting and crashes the userspace if the get hot reset info
path is triggered.

Fixes: f6944d4a ("vfio/pci: Collect hot-reset devices to local buffer")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219010Reported-by: Žilvinas Žaltiena <zaltys@natrix.lt>
Cc: Beld Zhang <beldzhang@gmail.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240710004150.319105-1-yi.l.liu@intel.comSigned-off-by: Alex Williamson <alex.williamson@redhat.com>

In order to use toshiba_dmi_quirks[] together with the standard DMI
matching functions, it must be terminated by a empty entry.

Since this entry is missing, an array out-of-bounds access occurs
every time the quirk list is processed.

Fix this by adding the terminating empty entry.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202407091536.8b116b3d-lkp@intel.com
Fixes: 3cb1f40d ("drivers/platform: toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models")
Cc: stable@vger.kernel.org
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240709143851.10097-1-W_Armin@gmx.deReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

this fixes a 'transaction should be locked' error in backpointers fsck
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Closes: https://syzkaller.appspot.com/bug?extid=8996d8f176cf946ef641Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Instead of popping an assert in bch2_write(), WARN and print out some
debugging info.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>