The geo/channel information is obtained from the EEPROM, which is read
during probe. We can thus set up channel information at this time. This
helps us to support ioctl commands that rely on this before the interface
is brought up.

Clearly matches _init_channel_map with _free_channel_map and _init_geos
with _free_geos to ensure functions calling these routines can also call
their cleanup routines.

Fixes a few bugs:
- if channel information is not available when ioctl commands are
  issued then we get a NULL pointer oops. Having channel information
  set up during probe we can deal with ioctl commands without requiring
  interface to be brought up.
  This fixes bug: http://www.bughost.org/bugzilla/show_bug.cgi?id=1552
- Fix potential problem if user triggers probe/remove/probe sequence. The
  value of priv->channel_count was used to determine if channel map is
  set up. This value was never reset when channel map was removed.
- Fix memory leak: priv->modes need to be freed when device removed.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a fix to patch "iwlwifi: fix iwl_mac_add_interface handler".
In that patch the return code was corrected for iwl3945, but not for
iwl4965.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I have been using the rtl8180 driver via the git kernel route for a while now and would like to suggest that the following local ammendment is included in the development tree in order to support the PCI device 1799:700f.

This device is found on the 'Belkin Wireless G Desktop Card' product, model 'F5D7000uk'.  From memory, the chip on the card is inscribed RTL8185L;  (I don't know the significance of the 'L', I'm afraid).
Signed-off-by: Adrian Bassett <adrian.bassett@hotmail.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a wrong condition for null qos data frames, causing us to
drop data frames needed for reordering as well.
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This zeros out all microcode related memory before loading
the microcode.

This also fixes initialization of the MAC control register.
The _only_ place where we overwrite the contents of the MAC control
register is at the beginning of b43_chip_init().
All other places must do read() -> mask/set -> write() to not
overwrite existing bits.

This also adds a longer delay for waiting for the microcode
to initialize itself. It seems that the current timeout is sufficient
on all available devices, but there's no real reason why we shouldn't
wait for up to one second. Slow embedded devices might exist.
Better safe than sorry.

While at it, fix naming of MACCTL values.

This patch by Michael Buesch has been ported to b43legacy.
Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it>
Acked-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We must kill rfkill in any error paths that trigger after rfkill init.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Acked-by: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We must kill rfkill in any error paths that trigger after rfkill init.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* use only one debug level for beacon debugging: unify ATH5K_DEBUG_BEACON and
ATH5K_DEBUG_BEACON_PROC.

* remove debug level ATH5K_DEBUG_FATAL. doesn't make sense as a debug level -
if it's fatal it should be logged as an error.

* fancier printing of debug levels. cat /debugfs/ath5k/phy0/debug.

* allow debug levels to be changed by echoing their name into
/debugfs/ath5k/phy0/debug. this will toggle the state, when it was off it will
be turned on and vice versa.

* use copy_from_user() when reading from the debug files. use unsigned int for
better optimization. reduce buffer sizes on stack.

drivers/net/wireless/ath5k/base.c:      Changes-licensed-under: 3-Clause-BSD
drivers/net/wireless/ath5k/debug.c:     Changes-licensed-under: GPL
drivers/net/wireless/ath5k/debug.h:     Changes-licensed-under: GPL
Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Acked-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When I introduced the alignment warning I forgot the A-MSDU case which
has a different requirement because each frame contains 14-byte 802.3
headers in front of the IP payload. This patch moves the alignment
warning to a place where we know whether we're dealing with an A-MSDU
frame and adjusts it accordingly.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A subtle merge error was introduced after re-queueing a patch for 2.6.24
instead of 2.6.25...
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It may be used by the modules nfs.ko and sunrpc.ko
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[ Made it a regular export rather than GPL-only  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'task_killable' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: (22 commits)
  Remove commented-out code copied from NFS
  NFS: Switch from intr mount option to TASK_KILLABLE
  Add wait_for_completion_killable
  Add wait_event_killable
  Add schedule_timeout_killable
  Use mutex_lock_killable in vfs_readdir
  Add mutex_lock_killable
  Use lock_page_killable
  Add lock_page_killable
  Add fatal_signal_pending
  Add TASK_WAKEKILL
  exit: Use task_is_*
  signal: Use task_is_*
  sched: Use task_contributes_to_load, TASK_ALL and TASK_NORMAL
  ptrace: Use task_is_*
  power: Use task_is_*
  wait: Use TASK_NORMAL
  proc/base.c: Use task_is_*
  proc/array.c: Use TASK_REPORT
  perfmon: Use task_is_*
  ...

Fixed up conflicts in NFS/sunrpc manually..

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  debug: turn ignore_loglevel into an early param
  sched: remove unused params
  sched: let +nice tasks have smaller impact
  sched: fix high wake up latencies with FAIR_USER_SCHED
  RCU: add help text for "RCU implementation type"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa: (299 commits)
  [ALSA] version 1.0.16rc2
  [ALSA] hda: fix Mic in as output
  [ALSA] emu10k1 - Another EMU0404 Board ID
  [ALSA] emu10k1 - Fix kthread handling at resume
  [ALSA] emu10k1: General cleanup, add new locks, fix alsa bug#3501, kernel bug#9304.
  [ALSA] emu10k1 - Use enum for emu_model types
  [ALSA] emu10k1 - Don't create emu1010 controls for non-emu boards
  [ALSA] emu10k1 - 1616(M) cardbus improvements
  [ALSA] snd:emu10k1: E-Mu updates. Fixes to firmware loading and support for 0404.
  [ALSA] emu10k1: Add comments regarding E-Mu ins and outs.
  [ALSA] oxygen: revert SPI clock frequency change for AK4396/WM8785
  [ALSA] es1938 - improve capture hw pointer reads
  [ALSA] HDA-Intel - Add support for Intel SCH
  [ALSA] hda: Add GPIO mute support to STAC9205
  [ALSA] hda-codec - Add Dell T3400 support
  [ALSA] hda-codec - Add model for HP DV9553EG laptop
  [ALSA] hda-codec - Control SPDIF as slave
  [ALSA] hda_intel: ALSA HD Audio patch for Intel ICH10 DeviceID's
  [ALSA] Fix Oops with PCM OSS sync
  [ALSA] hda-codec - Add speaker automute to ALC262 HP models
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  asm-generic/tlb.h: build fix
  x86: uninline __pte_free_tlb() and __pmd_free_tlb()
  x86: fix small sparse warning
  x86: fix sparse warning in kernel/scx200_32.c
  x86: early_ioremap_reset fix 2
  x86: c_p_a clflush_cache_range fix
  x86: change_page_attr_clear fix
  x86: fix sparse warnings in intel_cacheinfo.c

i was debugging early crashes and wondered where all the printks
went. The reason: ignore_loglevel_setup() was not called yet ...
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This removes the extra struct task_struct *p parameter in inc_nr_running
and dec_nr_running functions.

Signed-off by: Jerry Stralko <gerb.stralko@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Michel Dänzr has bisected an interactivity problem with
plus-reniced tasks back to this commit:

 810e95cc is first bad commit
 commit 810e95cc
 Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
 Date:   Mon Oct 15 17:00:14 2007 +0200

 sched: another wakeup_granularity fix

      unit mis-match: wakeup_gran was used against a vruntime

fix this by assymetrically scaling the vtime of positive reniced
tasks.
Bisected-by: Michel Dänzer <michel@tungstengraphics.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The reason why we are getting better wakeup latencies for
!FAIR_USER_SCHED is because of this snippet of code in place_entity():

	if (!initial) {
		/* sleeps upto a single latency don't count. */
		if (sched_feat(NEW_FAIR_SLEEPERS) && entity_is_task(se))
						     ^^^^^^^^^^^^^^^^^^
			vruntime -= sysctl_sched_latency;

		/* ensure we never gain time by being placed backwards. */
		vruntime = max_vruntime(se->vruntime, vruntime);
	}

NEW_FAIR_SLEEPERS feature gives credit for sleeping only to tasks and
not group-level entities. With the patch attached, I could see that
wakeup latencies with FAIR_USER_SCHED are restored to the same level as
!FAIR_USER_SCHED.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This patch supplies help text for the "RCU implementation type"
kernel configuration choice.
Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

bring back the avr32, blackfin, sh, sparc architectures into working order,
by reverting the effects of this change that came in via the x86 tree:

   commit a5a19c63
   Author: Jeremy Fitzhardinge <jeremy@goop.org>
   Date:   Wed Jan 30 13:33:39 2008 +0100

       x86: demacro asm-x86/pgalloc_32.h

Sorry about that!
Signed-off-by: Ingo Molnar <mingo@elte.hu>

this also removes an include file dependency.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

arch/x86/kernel/ds.c:226:9: warning: Using plain integer as NULL pointer
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

arch/x86/kernel/scx200_32.c:68:72: warning: Using plain integer as NULL pointer
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This patch fixes a bug of early_ioremap_reset(), which had been fixed
before by "convert the boot time page table to the kernels native
format" patch. But that patch has been reverted now.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Because in i386 early boot stage, boot_cpu_data may be not available,
which makes clflush_cach_range() into infinite loop, which is called
by change_page_attr(). This patch fixes this by setting
boot_cpu_data.x86_clflush_size in early_cpu_detect().
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This patch replaces __change_page_attr_set_clr() with
change_page_attr_set_clr() in change_page_attr_clear() to flush the
TLB/cache properly.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

arch/x86/kernel/cpu/intel_cacheinfo.c:355:7: warning: symbol 'i' shadows an earlier one
arch/x86/kernel/cpu/intel_cacheinfo.c:296:39: originally declared here
arch/x86/kernel/cpu/intel_cacheinfo.c:367:18: warning: incorrect type in argument 2 (different signedness)
arch/x86/kernel/cpu/intel_cacheinfo.c:367:18:    expected unsigned int *eax
arch/x86/kernel/cpu/intel_cacheinfo.c:367:18:    got int *
arch/x86/kernel/cpu/intel_cacheinfo.c:367:28: warning: incorrect type in argument 3 (different signedness)
arch/x86/kernel/cpu/intel_cacheinfo.c:367:28:    expected unsigned int *ebx
arch/x86/kernel/cpu/intel_cacheinfo.c:367:28:    got int *
arch/x86/kernel/cpu/intel_cacheinfo.c:367:38: warning: incorrect type in argument 4 (different signedness)
arch/x86/kernel/cpu/intel_cacheinfo.c:367:38:    expected unsigned int *ecx
arch/x86/kernel/cpu/intel_cacheinfo.c:367:38:    got int *
arch/x86/kernel/cpu/intel_cacheinfo.c:367:48: warning: incorrect type in argument 5 (different signedness)
arch/x86/kernel/cpu/intel_cacheinfo.c:367:48:    expected unsigned int *edx
arch/x86/kernel/cpu/intel_cacheinfo.c:367:48:    got int *
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Some laptop has an internal analog microphone that is 'fixed'.
This patch prevents creating a 'Mic In as Output' switch for
ports that can't be outputs.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

This is based on pseudo-random playing around with the capabilities.
With ca0102 this card gives no output atall, ca0108 appears to work
fine, so it rather looks similar to the EMU1010b/EMU1010 changes.
Some other people seem to have succeeded in using this aswell:
    https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3496
From: Veli-Matti Valtonen <maligor@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Don't create emu1010 kthread again at resume if it's already created.
Also make the thread function static.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Use enum instead of digits for emu_model types.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

The last change for emu1616 introduced a bug that the driver creates
emu1010-related controls even on non-emu boards.  Fixed now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

This patch improves E-Mu 1616(M) cardbus support. It adds definitions of the
new Microdock and 1010 cardbus registers (thanks again for descriptions
James) and improves mixer for this card. Now you can use S/PDIF and ADAT on
Mirodock and also use headpohone output on host cardbus card as another
independent output.
Signed-off-by: Ctirad Fertr <c.fertr@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

While the AK4396 and WM8785 datasheets say that the SPI clock cycle
length must be at least 200 ns, 320 ns seems not to work reliably with
the controller, so we better use 160 ns.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>