- 09 Nov, 2005 40 commits
-
-
Michael Krufky authored
- Update tuner documentation Signed-off-by:
Michael Krufky <mkrufky@m1k.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Hartmut Hackmann authored
- Added support for the following cards: - Philips EUROPA reference desigh - Compro VideoMate DVB-T300 - Compro VideoMate DVB-T200 (initial) Signed-off-by:
Hartmut Hackmann <hartmut.hackmann@t.online.de> Signed-off-by:
-
Hartmut Hackmann authored
- Added support for the Philips TD1316 tuner Signed-off-by:
-
Hartmut Hackmann authored
- TS DMA buffer synchronization was inverted Signed-off-by:
-
Peter Hagervall authored
- Fix a number of sparse warnings. Signed-off-by:
Peter Hagervall <hager@cs.umu.se> Signed-off-by:
-
Catalin Climov authored
[PATCH] v4l: 649: fixed gcc 4 0 compile warnings by moving var declarations to the top of the function or block - Fixed gcc 4.0 compile warnings by moving var declarations to the top of the function or block. Signed-off-by:
Catalin Climov <catalin@climov.com> Signed-off-by:
-
Torsten Seeboth authored
- Some clean up in cx88-tvaudio.c Signed-off-by:
Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
- Included CB3 structures on tda8290 Signed-off-by:
-
Michael Krufky authored
- Enable DVB support for DViCO FusionHDTV5 Lite. Signed-off-by:
-
Nickolay V. Shmyrev authored
- Refine input handling for Manli/Beholder. Signed-off-by:
Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by:
-
Nickolay V. Shmyrev authored
- Lower switch from VHF_LO to VHF_HI for Philips 1216ME MK3 Signed-off-by:
-
Nickolay V. Shmyrev authored
- Use KEY_MEDIA instead of KEY_VIDEOMODESWITCH Signed-off-by:
-
Nickolay V. Shmyrev authored
- Fixed typos Signed-off-by:
-
Nickolay V. Shmyrev authored
- Added new card GoTView PCI 7135 Signed-off-by:
-
Michael Krufky authored
- Don't enable gpioirq until after card probe. Signed-off-by:
-
Ricardo Cerqueira authored
- Add bttv card 137 - Conceptronic CTVFMi v2 Signed-off-by:
Ricardo Cerqueira <v4l\@cerqueira.org> Signed-off-by:
-
Michael Krufky authored
- Implemented TUNER_SET_STANDBY on cx88 init. Signed-off-by:
-
Michael Krufky authored
- Fixes broken compile of cx88-dvb.c Signed-off-by:
-
Catalin Climov authored
- Implemented the v4l2 mpeg api for blackbird cards. Signed-off-by:
-
Michael Krufky authored
- Capitalized hex A-F changed to lowercase in pci subsystem id constants Signed-off-by:
-
Nickolay V. Shmyrev authored
- Added Behold TV 409 FM Signed-off-by:
-
Nickolay V. Shmyrev authored
- Added new Avermedia card 550 Signed-off-by:
-
Glen Gray authored
- Added support for OEM version of FlyTV Platinum mini with a subvendor id of 0x4e42. - Added the OEM PCI id's to the docs/CARDLIST.saa7134 for item 39 - Modified the vmux in the SAA7134_BOARD_FLYTVPLATINUM_MINI driver data from 0 (Composite over S-Video) to 3 (Composite). Signed-off-by:
Glen Gray <glen@lincor.com> Signed-off-by:
-
Kirk Lapray authored
- Added function for nxt200x to change pll input - For VSB set to input 0, for QAM set to input 1 - will only be set for cards that have set_pll_input defined Signed-off-by:
Kirk Lapray <kirk.lapray@gmail.com> Signed-off-by:
-
Kirk Lapray authored
- Fix Typo: Change CONFIG_DVB_NXT2002 to CONFIG_DVB_NXT200X for the nxt200x module. Signed-off-by:
-
Michael Krufky authored
Correct QAM symbol_rate_min for lgdt3302 and lgdt3303 Thanks to: Mac Michaels and Steve Malenfant Signed-off-by:
Mac Michaels <wmichaels1@earthlink.net> Signed-off-by:
-
Andrew Morton authored
drivers/media/dvb/dvb-usb/dvb-usb-urb.c: In function `dvb_usb_allocate_stream_buffers': drivers/media/dvb/dvb-usb/dvb-usb-urb.c:199: warning: int format, different type arg (arg 4) Don't assume that dma_addr_t is 32-bit. (dvb has quite a few such warnings. Please compile it with a 64-bit compiler, fix them up - some are oopsable). Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
Updated documentation to include "hybrid" v4l/dvb and ATSC cards. Signed-off-by:
-
Patrick Boettcher authored
Adding support for the Artec T1 USB2.0 box (real USB2.0) Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
-
Kirk Lapray authored
Remove status check from nxt200x_readreg_multibyte, it really shouldn't be necessary. Signed-off-by:
-
Mark Adams authored
Fix a bug in the software demux which causes large MPEG sections to be lost when they follow very small sections. The problem happens when two sections begin in the same transport packet. The dvb_demux code resets its buffer only before the first of these sections. This means that when the second (or subsequent) section begins, there is up to 182 bytes of buffer space already used. If the following section is close to the maximum size, it currently won't fit in the (4096-byte) buffer and is thrown away. The fix is simply to enlarge the buffer by the size of one transport packet and correct one usage of the SECFEED_SIZE definition where what is really meant is the maximum size of a section. Signed-off-by:
Mark Adams <mark147m@gmail.com> Signed-off-by:
-
Michael Krufky authored
- Add support for AVerTVHD MCE a180. - Instead of determining how to write to the tuner based on which NIM is being used, make this determination based on whether the chip is a NXT2002 or NXT2004. - If NXT2004, write directly to tuner. If NXT2002, write through NXT chip. Signed-off-by:
-
Michael Krufky authored
Removed unnecessary null check before kfree() ...inspired by the big patch from Jesper Juhl. Signed-off-by:
-
Michael Krufky authored
Check that a callback (set_ts_params) is set before calling it. Signed-off-by:
-
Kirk Lapray authored
* nxt200x.c, nxt200x.h - New frontend module that supports both NXT2002 and NXT2004. So far, only tested on NXT2004. After testing on NXT2002, we should deprecate the nxt2002 module, and implement this one instead on the applicable cards. * get_dvb_firmware: - Added support for the NXT2004 firmware. This firmware works with both the ATI HDTV Wonder and the AVerTVHD MCE a180. This was originally written by Jean-Francois Thibert * dvb-pll.c - Fixed minimum frequency for tuv1236d. It seems that the data sheets are wrong. Signed-off-by:
-
Oliver Endriss authored
fixed inittab register 0x12 for BSRU6/BSBE1 Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Oliver Endriss authored
stv0299_set_frontend(): reduced number of i2c transfers, set register 0x12 from inittab Signed-off-by:
-
Stuart Auchterlonie authored
Nebula nxt6000 requires fe reset. Signed-off-by:
Stuart Auchterlonie <stuarta@squashedfrog.net> Signed-off-by:
-
Kirk Lapray authored
- Added support for the following: Philips TUV1236D - ATI HDTV Wonder ALPS TDHU2 - AverTVHD MCE A180 Samsung TBMV30111IN - Air2PC ATSC - 2nd generation These will be used in a new NXT200X driver that incorporates the NXT2002 driver and adds support for a couple NXT2004 based cards. Signed-off-by:
-
Henrik Sjoberg authored
dst_write_tuna needs to be protected against simultaeneous writes, just like dst_command Signed-off-by:
Henrik Sjoberg <henke@epact.se> Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
