- 26 Oct, 2021 3 commits
-
-
Chang S. Bae authored
Split out the size calculation from the paranoia check so it can be used for recalculating buffer sizes when dynamically enabled features are supported. Signed-off-by:
Chang S. Bae <chang.seok.bae@intel.com> [ tglx: Adopted to changed base code ] Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211021225527.10184-4-chang.seok.bae@intel.com
-
Thomas Gleixner authored
For historical reasons MINSIGSTKSZ is a constant which became already too small with AVX512 support. Add a mechanism to enforce strict checking of the sigaltstack size against the real size of the FPU frame. The strict check can be enabled via a config option and can also be controlled via the kernel command line option 'strict_sas_size' independent of the config switch. Enabling it might break existing applications which allocate a too small sigaltstack but 'work' because they never get a signal delivered. Though it can be handy to filter out binaries which are not yet aware of AT_MINSIGSTKSZ. Also the upcoming support for dynamically enabled FPU features requires a strict sanity check to ensure that: - Enabling of a dynamic feature, which changes the sigframe size fits into an enabled sigaltstack - Installing a too small sigaltstack after a dynamic feature has been added is not possible. Implement the base check which is controlled by config and command line options. Signed-off-by: -
Thomas Gleixner authored
New x86 FPU features will be very large, requiring ~10k of stack in signal handlers. These new features require a new approach called "dynamic features". The kernel currently tries to ensure that altstacks are reasonably sized. Right now, on x86, sys_sigaltstack() requires a size of >=2k. However, that 2k is a constant. Simply raising that 2k requirement to >10k for the new features would break existing apps which have a compiled-in size of 2k. Instead of universally enforcing a larger stack, prohibit a process from using dynamic features without properly-sized altstacks. This must be enforced in two places: * A dynamic feature can not be enabled without an large-enough altstack for each process thread. * Once a dynamic feature is enabled, any request to install a too-small altstack will be rejected The dynamic feature enabling code must examine each thread in a process to ensure that the altstacks are large enough. Add a new lock (sigaltstack_lock()) to ensure that threads can not race and change their altstack after being examined. Add the infrastructure in form of a config option and provide empty stubs for architectures which do not need dynamic altstack size checks. This implementation will be fleshed out for x86 in a future patch called x86/arch_prctl: Add controls for dynamic XSTATE components [dhansen: commit message. ] Signed-off-by:
-
- 23 Oct, 2021 4 commits
-
-
Thomas Gleixner authored
No more users. Signed-off-by:
-
Thomas Gleixner authored
For the upcoming AMX support it's necessary to do a proper integration with KVM. Currently KVM allocates two FPU structs which are used for saving the user state of the vCPU thread and restoring the guest state when entering vcpu_run() and doing the reverse operation before leaving vcpu_run(). With the new fpstate mechanism this can be reduced to one extra buffer by swapping the fpstate pointer in current::thread::fpu. This makes the upcoming support for AMX and XFD simpler because then fpstate information (features, sizes, xfd) are always consistent and it does not require any nasty workarounds. Convert the KVM FPU code over to this new scheme. Signed-off-by:
-
Thomas Gleixner authored
For the upcoming AMX support it's necessary to do a proper integration with KVM. Currently KVM allocates two FPU structs which are used for saving the user state of the vCPU thread and restoring the guest state when entering vcpu_run() and doing the reverse operation before leaving vcpu_run(). With the new fpstate mechanism this can be reduced to one extra buffer by swapping the fpstate pointer in current::thread::fpu. This makes the upcoming support for AMX and XFD simpler because then fpstate information (features, sizes, xfd) are always consistent and it does not require any nasty workarounds. Provide: - An allocator which initializes the state properly - A replacement for the existing FPU swap mechanim Aside of the reduced memory footprint, this also makes state switching more efficient when TIF_FPU_NEED_LOAD is set. It does not require a memcpy as the state is already correct in the to be swapped out fpstate. The existing interfaces will be removed once KVM is converted over. Signed-off-by:
-
Thomas Gleixner authored
For the upcoming AMX support it's necessary to do a proper integration with KVM. To avoid more nasty hackery in KVM which violate encapsulation extend struct fpu and fpstate so the fpstate switching can be consolidated and simplified. Currently KVM allocates two FPU structs which are used for saving the user state of the vCPU thread and restoring the guest state when entering vcpu_run() and doing the reverse operation before leaving vcpu_run(). With the new fpstate mechanism this can be reduced to one extra buffer by swapping the fpstate pointer in current::thread::fpu. This makes the upcoming support for AMX and XFD simpler because then fpstate information (features, sizes, xfd) are always consistent and it does not require any nasty workarounds. Add fpu::__task_fpstate to save the regular fpstate pointer while the task is inside vcpu_run(). Add some state fields to fpstate to indicate the nature of the state. Signed-off-by:
-
- 22 Oct, 2021 3 commits
-
-
Thomas Gleixner authored
Now that everything is mopped up, move all the helpers and prototypes into the core header. They are not required by the outside. Signed-off-by:
-
Thomas Gleixner authored
xfeatures_mask_fpstate() is no longer valid when dynamically enabled features come into play. Rework restore_regs_from_fpstate() so it takes a constant mask which will then be applied against the maximum feature set so that the restore operation brings all features which are not in the xsave buffer xfeature bitmap into init state. This ensures that if the previous task used a dynamically enabled feature that the task which restores has all unused components properly initialized. Cleanup the last user of xfeatures_mask_fpstate() as well and remove it. Signed-off-by:
-
Thomas Gleixner authored
Use the new fpu_user_cfg to retrieve the information instead of xfeatures_mask_uabi() which will be no longer correct when dynamically enabled features become available. Using fpu_user_cfg is appropriate when setting XCOMP_BV in the init_fpstate since it has space allocated for "max_features". But, normal fpstates might only have space for default xfeatures. Since XRSTOR* derives the format of the XSAVE buffer from XCOMP_BV, this can lead to XRSTOR reading out of bounds. So when copying actively used fpstate, simply read the XCOMP_BV features bits directly out of the fpstate instead. This correction courtesy of Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
- 21 Oct, 2021 15 commits
-
-
Thomas Gleixner authored
Move the feature mask storage to the kernel and user config structs. Default and maximum feature set are the same for now. Signed-off-by:
-
Thomas Gleixner authored
Use the new kernel and user space config storage to store and retrieve the XSTATE buffer sizes. The default and the maximum size are the same for now, but will change when support for dynamically enabled features is added. Signed-off-by:
-
Thomas Gleixner authored
The size calculations are partially unreadable gunk. Clean them up. No functional change. Signed-off-by:
-
Thomas Gleixner authored
Clean the function up before making changes. No functional change. Signed-off-by:
-
Thomas Gleixner authored
Provide a struct to store information about the maximum supported and the default feature set and buffer sizes for both user and kernel space. This allows quick retrieval of this information for the upcoming support for dynamically enabled features. [ bp: Add vertical spacing between the struct members. ] Signed-off-by:
-
Thomas Gleixner authored
For dynamically enabled features it's required to get the features which are enabled for that context when restoring from sigframe. The same applies for all signal frame size calculations. Signed-off-by:
-
Thomas Gleixner authored
Prepare for dynamically enabled states per task. The function needs to retrieve the features and sizes which are valid in a fpstate context. Retrieve them from fpstate. Move the function declarations to the core header as they are not required anywhere else. Signed-off-by:
-
Thomas Gleixner authored
With dynamically enabled features the copy function must know the features and the size which is valid for the task. Retrieve them from fpstate. Signed-off-by:
-
Thomas Gleixner authored
Straight forward conversion. No functional change. Signed-off-by:
-
Thomas Gleixner authored
With dynamically enabled features the sigframe code must know the features which are enabled for the task. Get them from fpstate. Signed-off-by:
-
Thomas Gleixner authored
With variable feature sets XSAVE[S] requires to know the feature set for which the buffer is valid. Retrieve it from fpstate. Signed-off-by:
-
Thomas Gleixner authored
Make use of fpstate::size in various places which require the buffer size information for sanity checks or memcpy() sizing. Signed-off-by:
-
Thomas Gleixner authored
Add state size and feature mask information to the fpstate container. This will be used for runtime checks with the upcoming support for dynamically enabled features and dynamically sized buffers. That avoids conditionals all over the place as the required information is accessible for both default and extended buffers. Signed-off-by:
-
Thomas Gleixner authored
In preparation for dynamically enabled FPU features move the function out of line as the goal is to expose less and not more information. Signed-off-by:
-
Thomas Gleixner authored
If fork fails early then the copied task struct would carry the fpstate pointer of the parent task. Not a problem right now, but later when dynamically allocated buffers are available, keeping the pointer might result in freeing the parent's buffer. Set it to NULL which prevents that. If fork reaches clone_thread(), the pointer will be correctly set to the new task context. Signed-off-by:
-
- 20 Oct, 2021 15 commits
-
-
Thomas Gleixner authored
All users converted. Remove it along with the sanity checks. Signed-off-by:
-
Thomas Gleixner authored
Convert math emulation code to the new register storage mechanism in preparation for dynamically sized buffers. No functional change. Signed-off-by:
-
Thomas Gleixner authored
Convert the rest of the core code to the new register storage mechanism in preparation for dynamically sized buffers. No functional change. Signed-off-by:
-
Thomas Gleixner authored
Convert signal related code to the new register storage mechanism in preparation for dynamically sized buffers. No functional change. Signed-off-by:
-
Thomas Gleixner authored
Convert regset related code to the new register storage mechanism in preparation for dynamically sized buffers. No functional change. Signed-off-by:
-
Thomas Gleixner authored
Convert FPU tracing code to the new register storage mechanism in preparation for dynamically sized buffers. No functional change. Signed-off-by:
-
Thomas Gleixner authored
Convert KVM code to the new register storage mechanism in preparation for dynamically sized buffers. No functional change. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Link: https://lkml.kernel.org/r/20211013145322.451439983@linutronix.de
-
Thomas Gleixner authored
In order to prepare for the support of dynamically enabled FPU features, move the clearing of xstate components to the FPU core code. No functional change. Signed-off-by:
-
Thomas Gleixner authored
Convert restore_fpregs_from_fpstate() and related code to the new register storage mechanism in preparation for dynamically sized buffers. No functional change. Signed-off-by:
-
Thomas Gleixner authored
Convert fpstate_init() and related code to the new register storage mechanism in preparation for dynamically sized buffers. No functional change. Signed-off-by:
-
Thomas Gleixner authored
New xfeatures will not longer be automatically stored in the regular XSAVE buffer in thread_struct::fpu. The kernel will provide the default sized buffer for storing the regular features up to AVX512 in thread_struct::fpu and if a task requests to use one of the new features then the register storage has to be extended. The state will be accessed via a pointer in thread_struct::fpu which defaults to the builtin storage and can be switched when extended storage is required. To avoid conditionals all over the code, create a new container for the register storage which will gain other information, e.g. size, feature masks etc., later. For now it just contains the register storage, which gives it exactly the same layout as the exiting fpu::state. Stick fpu::state and the new fpu::__fpstate into an anonymous union and initialize the pointer. Add build time checks to validate that both are at the same place and have the same size. This allows step by step conversion of all users. Signed-off-by:
-
Thomas Gleixner authored
Similar to the copy from user function the FPU core has this already implemented with all bells and whistles. Get rid of the duplicated code and use the core functionality. Signed-off-by:
-
Thomas Gleixner authored
To make upcoming changes for support of dynamically enabled features simpler, provide a proper function for the exception handler which removes exposure of FPU internals. Signed-off-by:
-
Thomas Gleixner authored
Now that the file is empty, fixup all references with the proper includes and delete the former kitchen sink. Signed-off-by:
-
Thomas Gleixner authored
Move the global interfaces to api.h and the rest into the core. Signed-off-by:
-
