- 25 Nov, 2016 3 commits
-
-
Xiang Chen authored
There are many BROADCAST primitives generated by the host. We are only interested in BROADCAST (CHANGE) primitives currently, so only process this. Signed-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
John Garry <john.garry@huawei.com> Reviewed-by:
Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Xiang Chen authored
Currently slots are allocated from queues in a round-robin fashion. This causes a problem for internal commands in device mode. For this mode, we should ensure that the internal abort command is the last command seen in the host for that device. We can only ensure this when we place the internal abort command after the preceding commands for device that in the same queue, as there is no order in which the host will select a queue to execute the next command. This queue restriction makes supporting scsi mq more tricky in the future, but should not be a blocker. Note: Even though v1 hw does not support internal abort, the allocation method is chosen to be the same for consistency. Signed-off-by: -
Xiang Chen authored
For ECC 1bit error, logic can recover it, so we only print a warning. For ECC multi-bit and AXI bus fatal error, we panic. Signed-off-by:
-
- 22 Nov, 2016 4 commits
-
-
Quentin Lambert authored
Most error branches following the call to pmcraid_get_free_cmd contain a call to pmcraid_return_cmd. This patch add these calls where they are missing. Moreover, most error branches following the call to class_create contain a call to class_destroy. This patch add these calls where they are missing. This issue was found with Hector. Signed-off-by:
Quentin Lambert <lambert.quentin@gmail.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Kiwoong Kim authored
Some UFS host controllers may think granularities of PRDT length and offset as bytes, not double words. Signed-off-by:
Kiwoong Kim <kwmad.kim@samsung.com> Reviewed-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
-
Bjorn Andersson authored
ufs_qcom_init() sets the hba priv data before attempting to acquire the phy handle, so make sure to clear this in the case of an error. Failing to do this will make ufs_qcom_setup_clocks() operate on the uninitalized host object. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
-
Arnd Bergmann authored
These two macros cause lots of warnings with gcc-7: drivers/scsi/bfa/bfa_svc.c: In function 'bfa_fcxp_meminfo': drivers/scsi/bfa/bfa_svc.c:521:103: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context] Using inline functions makes them much more readable and avoids the warnings. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Acked by: Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by:
-
- 18 Nov, 2016 16 commits
-
-
Helge Deller authored
Fix the printk continuations when running the mptfusion driver. This patch brings the capabilities into one single syslog line again: mptbase: ioc1: Initiating bringup ioc1: LSI53C1030 B2: Capabilities={Initiator,Target} scsi host3: ioc1: LSI53C1030 B2, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=67 Tested on a parisc C8000 machine. Signed-off-by:Helge Deller <deller@gmx.de> Signed-off-by:
-
Hannes Reinecke authored
Use pci_alloc_irq_vectors and drop the hand-crafted interrupt affinity routines. Signed-off-by:
Hannes Reinecke <hare@suse.com> Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Reviewed-by:
Raghava Aditya Renukunta <raghavaaditya.renukunta@microsemi.com> Signed-off-by:
-
Johannes Thumshirn authored
Now that all conversions are done, move the FibreChannel bsg code over to the bsg library. This patch is derived from work done by Mike Christie in 2011 [1] but only the iscsi parts got merged back then. [1] http://marc.info/?l=linux-scsi&m=131149780921009&w=2Signed-off-by:
-
Johannes Thumshirn authored
Add bsg_job_put() and bsg_job_get() so don't need to export bsg_destroy_job() any more. Signed-off-by:
-
Johannes Thumshirn authored
fc_bsg_jobdone() and bsg_job_done() are 1:1 copies now so use the bsg-lib one instead of the FC private implementation. Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
-
Johannes Thumshirn authored
bsg_softirq_done() and fc_bsg_softirq_done() are copies of each other, so ditch the fc specific one. Signed-off-by:
-
Johannes Thumshirn authored
fc_destroy_bsgjob() and bsg_destroy_job() are now 1:1 copies, so use the latter. As bsg_destroy_job() comes from bsg-lib we need to select it in Kconfig once CONFOG_SCSI_FC_ATTRS is active. Signed-off-by:
-
Johannes Thumshirn authored
Change FC drivers to use 'struct bsg_job' from bsg-lib.h instead of 'struct fc_bsg_job' from scsi_transport_fc.h and remove 'struct fc_bsg_job'. Signed-off-by:
-
Johannes Thumshirn authored
Add reference counting to 'struct bsg_job' so we can implement a reuqest timeout handler for bsg_jobs, which is needed for Fibre Channel. Signed-off-by:
-
Johannes Thumshirn authored
Implement kref backed reference counting instead of rolling our own. This elimnates the need of the following fields in 'struct fc_bsg_job': * ref_cnt * state_flags * job_lock bringing us close to unification of 'struct fc_bsg_job' and 'struct bsg_job'. Signed-off-by:
-
Johannes Thumshirn authored
Don't set FC_RQST_STATE_DONE before calling fc_bsg_jobdone() as fc_bsg_jobdone() calls blk_complete_requeust() which raises a soft-IRQ that ends up in fc_bsg_sofirq_done() and fc_bsg_softirq_done() sets the FC_RQST_STATE_DONE flag. Signed-off-by:
-
Johannes Thumshirn authored
Provide fc_bsg_to_rport() helper that will become handy when we're moving from struct fc_bsg_job to a plain struct bsg_job. Also move all LLDDs to use the new helper. Signed-off-by:
-
Johannes Thumshirn authored
Provide fc_bsg_to_shost() helper that will become handy when we're moving from struct fc_bsg_job to a plain struct bsg_job. Also use this little helper in the LLDDs. Signed-off-by:
-
Johannes Thumshirn authored
Export fc_bsg_jobdone so drivers can use it directly instead of doing the round-trip via struct fc_bsg_job::job_done() and use it in the LLDDs. That way we can also unify the interfaces of fc_bsg_jobdone and bsg_job_done. As we've converted all LLDDs over to use fc_bsg_jobdone() directly, we can remove the function pointer from struct fc_bsg_job as well. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
-
Johannes Thumshirn authored
Don't use fc_bsg_job::request and fc_bsg_job::reply directly, but use helper variables bsg_request and bsg_reply. This will be helpful when transitioning to bsg-lib. Signed-off-by:
-
Johannes Thumshirn authored
struct fc_bsg_buffer is just a clone of struct bsg_buffer from bsg-lib, so use this one instead. Signed-off-by:
-
- 17 Nov, 2016 7 commits
-
-
Arnd Bergmann authored
gcc-7 notices that the condition in mvs_94xx_command_active looks suspicious: drivers/scsi/mvsas/mv_94xx.c: In function 'mvs_94xx_command_active': drivers/scsi/mvsas/mv_94xx.c:671:15: error: '<<' in boolean context, did you mean '<' ? [-Werror=int-in-bool-context] This was introduced when the mv_printk() statement got added, and leads to the condition being ignored. This is probably harmless. Changing '&&' to '&' makes the code look reasonable, as we check the command bit before setting and printing it. Fixes: a4632aae ("[SCSI] mvsas: Add new macros and functions") Signed-off-by:
-
Geliang Tang authored
Use module_pci_driver() helper to simplify the code. Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Acked-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Satish Kharat authored
Signed-off-by:
Satish Kharat <satishkh@cisco.com> Signed-off-by:
Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by:
-
Zang Leigang authored
Add a new ufshcd_state, indicats that an err handler may get to run immediately. Use UFSHCD_STATE_ERROR here looks not literaly correct. Signed-off-by:
Zang Leigang <zangleigang@hisilicon.com> Reviewed-by:
-
Satish Kharat authored
Signed-off-by:
-
Don Brace authored
- driver was not calling done in some cases which causes the volume to be offlined. - avoid doing rescan during a reset. Reviewed-by:
Scott Teel <scott.teel@microsemi.com> Reviewed-by:
Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Tomas Henzl authored
It is not good when an irq arrives before driver structures are allocated. Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
- 14 Nov, 2016 5 commits
-
-
Colin Ian King authored
Use correct index on q, use h->intr_mode instead of i. Issue detected using static analysis with cppcheck Fixes: bc2bb154 ("scsi: hpsa: use pci_alloc_irq_vectors and automatic irq affinity") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Colin Ian King authored
Trivial fix to typo "repsonse" to "response" in dev_dbg message. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake "suspeneded" to "suspended" in dev_warn messages. [mkp: corrected description. Patch is against the isci driver, not iscsi] Signed-off-by:
-
Colin Ian King authored
A couple of dev_printk messages spans two lines and the literal string is missing a white space between words. Add the white space. Signed-off-by:
-
Bart Van Assche authored
It is required to hold the queue lock when calling blk_run_queue_async() to avoid that a race between blk_run_queue_async() and blk_cleanup_queue() is triggered. Additionally, remove the get_device() and put_device() calls from fc_bsg_goose_queue. It is namely the responsibility of the caller of fc_bsg_goose_queue() to ensure that the bsg queue does not disappear while fc_bsg_goose_queue() is in progress. Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
- 12 Nov, 2016 5 commits
-
-
Ondrej Zary authored
When a SW-configurable card is specified but not found, the driver releases wrong region, causing the following message in kernel log: Trying to free nonexistent resource <0000000000000000-000000000000000f> Fix it by assigning base earlier. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Fixes: a8cfbcae ("scsi: g_NCR5380: Stop using scsi_module.c") Signed-off-by:
-
Kiwoong Kim authored
Some UFS host controller may need to configure some things around hibern8 enter/exit Signed-off-by:
-
Kiwoong Kim authored
Some UFS host controller may need to configure some things before any task management request is issued Signed-off-by:
-
Kiwoong Kim authored
Some UFS host controller may need to configure some things before any transfer request is issued. Signed-off-by:
-
Christoph Hellwig authored
This patch converts over hpsa to use the pci_alloc_irq_vectors including the PCI_IRQ_AFFINITY flag that automatically assigns spread out irq affinity to the I/O queues. It also cleans up the per-ctrl interrupt state due to the use of the pci_irq_vector and pci_free_irq_vectors helpers that don't need to know the exact irq type. Additionally it changes a little oddity in the existing code that was using different array indixes into the per-vector arrays depending on whether a controller is using a single INTx or single MSI irq. [mkp: fixed typo] Signed-off-by:
-
