- 30 Mar, 2009 40 commits
-
-
Mike Isely authored
Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
The v4l2-subdev infrastructure requires that an initialization call must be issued to all attached sub-devices before normal operation can start. This change satisfies that requirement. Signed-off-by:
-
Mike Isely authored
When a pvrusb2 driver instance first initializes, we need to be sure to send out a complete state update for everything to all attached modules. The old i2c layer did this by keeping a separate mask of "stale" bits for each attached module - and setting that mask to all stale when that module attaches. But the new sub-device adaptation I've implemented here no longer has per-module stale bits. So instead there's now a global "force dirty" bit that is set upon instance initialization, before the sub-devices are attached. After the first update, this bit is cleared, allowing for normal update-on-dirty behavior. In this manner, we ensure that all sub-devices have been properly synchronized at initialization. Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
The tuner sub-device isn't going to work very well unless we tell it the correct tuner type to use... Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
The sub-device update mechanism relies on various "dirty" bits in the driver in order to know what pieces of state need to be propagated out to the various sub-devices. But that won't work if the dirty bits are cleared before the update gets a chance to run. This change ensures that the update takes place before the dirty bits are cleared. Signed-off-by:
-
Mike Isely authored
A sub-device won't successfully attach to our I2C adapter if its class isn't set to zero. Right the class is still set to I2C_CLASS_TV_ANALOG in order to allow the old mechanism to still work. This change temporarily sets the class to zero during the interval when the sub-device attaches. This code will get removed when the old i2c layer is finally removed from the driver. Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
The pvrusb2 driver had previously been using i2c module specific calls to set the sample rate (a long long time ago this was needed). These days it is safe to use a broadcast so let's just broadcast this when communicating audio sample rate to sub-devices. Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Lay down a foundation whereby it becomes possible to send customized updates to specific sub-devices. (This becomes useful for routing configuration, which is a very sub-device specific operation.) Signed-off-by:
-
Mike Isely authored
The pvrusb2 driver has a function that reports internal state. It can be accessed from either the debug interface or as the result of a v4l log status request. This change adds information listing sub-devices to the report. Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Implement code to send appropriate streaming start/stop commands to attached sub-devices Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Other code may need to treat the video decoder sub-device in a special manner, so this change implements code to recognize when such a sub-device is connected to the driver, does any special processing for it, and notes who the device is for future reference. Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
This is another step in the v42l-subdev assimilation. This implements various call-outs to sub-devices based on state changes within the pvrusb2 driver. Signed-off-by:
-
Mike Isely authored
Implement status fetching operations in terms of calling out to sub-device(s). Signed-off-by:
-
Mike Isely authored
Implement tie-in for v4l2 debug register access such that the appropriate attached sub-device is handled. Signed-off-by:
-
Mike Isely authored
Trigger a broadcast to attached sub-devices when a logging request is made. Signed-off-by:
-
Mike Isely authored
These changes set up the spot where we'll check for and set general updates to any attached sub-devices. Signed-off-by:
-
Mike Isely authored
Tie up loose ends with v4l2-subdev setup. Set attached module's group ID to match our internal ID, emit a few useful messages when sub-devices are dealt with, implement better error legs, and fix an error in the old i2c layer (caused by changes related to the v4l2-subdev work here). Signed-off-by:
-
Mike Isely authored
In order to keep a sub-device from promiscuously attaching to the pvrusb2 driver, the i2c adapter's class must be cleared. This change clears that class by default. Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
This implements a temporary mechanism to "untrack" an i2c module from the old i2c layer. The v4l2-subdev related code in the driver will use this to remove a sub-device from the old i2c layer. In the end, once the old i2c layer is removed, this will also eventually go away. Signed-off-by:
-
Mike Isely authored
Set up new mechanism for declaring and loading appropriate sub-devices when driver initializes. This is another part of the v4l2-subdev adoption. Signed-off-by:
-
