- 03 Jul, 2014 40 commits
-
-
Johan Hedberg authored
To be able to make the right choice of whether to start passive scanning or to send out a mgmt_device_found event we need to know if there are any devices in the le_conn_params list with the auto_connect value set to HCI_AUTO_CONN_REPORT. This patch adds a counter for this kind of devices. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Marcel Holtmann authored
This adds support for configuring the hci_vhci virtual controllers as a raw-only device using HCI_QUIRK_RAW_DEVICE. This is useful for testing the kernel internal infrastructure. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
This command allows to get the list of currently known controller that are in unconfigured state. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
When a controller in an unconfigured state gets removed, then send Unconfigured Index Removed events. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
When a controller is in unconfigured state it is currently hidden from the management interface. This change now announces the new controller with an Unconfigured Index Added event and allows clients to easily detect the controller. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
With the new unconfigured controller state it is possible to provide a fully functional HCI transport, but disable the higher level operations that would normally happen. This way userspace can try to configure the controller before releases the unconfigured state. The internal state is represented by HCI_UNCONFIGURED. This replaces the HCI_QUIRK_RAW_DEVICE quirk as internal state representation. This is now a real state and drivers can use the quirk to actually trigger this state. In the future this will allow a more fine grained switching from unconfigured state to configured state for controller inititialization. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Johan Hedberg authored
If we don't have an identity address for connection parameters it doesn't really make sense to send them to user space. Instead just ignore them for now. Later we can add support for sending them when we eventually get the identity through pairing. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
There are more places that can take advantage of is_identity_address() besides hci_core.c. This patch moves the function to hci_core.h and gives it the appropriate hci_ prefix. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The calling functions of mgmt_new_conn_param have more information about the parameters, such as whether the kernel is tracking them or not. It makes therefore sense to have them pass an initial store_hint value to the mgmt_new_conn_param function. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The caller of hci_le_conn_update is directly interested in knowing what the best value is for the store_hint parameter of the corresponding mgmt event. Since hci_le_conn_update knows whether there were stored parameters that were updated or not we can have it return an initial store_hint value to the caller. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
We should update any stored connection parameters when we receive the LE Remote Connection Parameter Request HCI event. This patch adds the necessary code to the function that handles the event. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
This patch implements the new Load Connection Parameters mgmt command that's intended to load the desired connection parameters for LE devices. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The Remove Device mgmt command is supposed to undo what the Add Device command does. An entry added by Add Device cannot have the HCI_AUTO_CONN_DISABLED auto_connect value, so we should treat this as an invalid entry to remove. This patch adds the necessary pieces to the Remove Device command handler so that it only removes entries which were added by Add Device. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The 0x00 action value of mgmt means "scan and report" but do not connect. This is different from HCI_AUTO_CONN_DISABLED so we need a new value for it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
In some circumstances we'll need to either clear only the enabled parameters or only the disabled ones. This patch adds convenience functions for this purpose. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
We'll soon have specific clear functions for clearing enabled or disabled entries, so rename the function that removes everything to clear_all(). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
This patch fixes the following sparse warning caused by a missing declaration in the header file: drivers/bluetooth/btmrvl_main.c:218:5: warning: symbol 'btmrvl_pscan_window_reporting' was not declared. Should it be static? Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Marcel Holtmann authored
The Broadcom BCM20702A0 USB controllers might come with the default address 00:20:70:02:A0:00 when booting up. If this happens, then warn about such address being used. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
Some Intel Bluetooth controllers come with a default address. If this address is found, print an error to warn the user about it. The controller is fully operational, but the danger of duplicate Bluetooth addresses might causes issues. At least with a clear error it becomes easier to debug these cases. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
When allocating a new controller structure, then default to the internal use value 0xffff first. Default to 0x0000 is a bad idea since that is the manufacturer identifier of Ericsson Technology Licensing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
For the Intel based USB devices add support for configuration of the public device address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Johan Hedberg authored
Unlike BR/EDR we cannot reject LE connections of blocked devices but have to do it as soon as we get a LE Connection Complete event. The patch adds a blacklist check to the hci_le_conn_complete_evt function and drops all connections for blocked devices. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The ATT channel isn't the only one that we should ensure doesn't receive data from blocked devices. SMP is another, and in general we don't want data packets going to any of the various handlers. Therefore, add a single check to the l2cap_recv_frame function. The patch fixes at the same time the use of a correct address type. The blacklist stores the values with the user space facing triple type wheras hci_conn->dst_type uses the HCI address type (0x00 or 0x01). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Marcel Holtmann authored
For the Broadcom based USB devices add support for configuration of the public device address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
Some embedded controllers allow the programming of a public address and this adds vendor support for supporting OEM confguration of such addresses. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Andre Guedes authored
This patch introduces a new Mgmt event called "New Connection Parameter". This event indicates to userspace the connection parameters values the remote device requested. The user may store these values and load them into kernel. This way, next time a connection is established to that device, the kernel will use those parameters values instead of the default ones. This event is sent when the remote device requests new connection parameters through connection parameter update procedure. This event is not sent for slave connections. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Andre Guedes authored
The Bluetooth 4.1 introduces a new LE meta event called "LE Remote Connection Parameter Request" event. In order to the controller sends this event to host, we should enable it during controller initialization. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Andre Guedes authored
During init2 phase, the LE local features have not be read yet so we aren't able to rely on hdev->le_features to determine if the controller supports the Connection Parameters Request Procedure. For that reason, this patch moves LE event mask setting from init2 into init3 initialization phase. The hdev->le_features mask will be checked by the next patch in order to know if "LE Remote Connection Parameter Request Event" should be enabled. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Andre Guedes authored
This patch adds support for LE Connection Parameters Request Link Layer control procedure introduced in Core spec 4.1. This procedure allows a Peripheral or Central to update the Link Layer connection parameters of an established connection. Regarding the acceptance of connection parameters, the LL procedure follows the same approach of L2CAP procedure (see l2cap_conn_param_ update_req function). We accept any connection parameters values as long as they are within the valid range. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Chin-Ran Lo authored
After BT_CMD_HOST_SLEEP_ENABLE command finishes, driver should wait until getting BT_EVENT_HOST_SLEEP_ENABLE event to complete suspend procedure. Without this patch the suspend handler would return success earlier. By the time when the BT_EVENT_HOST_SLEEP_ENABLE event comes in the controller driver could have already turned off the bus clock. This causes kernel crash or system reboot eventually. Cc: <stable@vger.kernel.org> # 3.13+ Signed-off-by: Chin-Ran Lo <crlo@marvell.com> Signed-off-by: Jeff CF Chen <jeffc@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Bing Zhao authored
A vendor specific command is sent to firmware during initialization to enable this feature. This command is for SD8897 only. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
For the Block/Unblock Device mgmt commands we should only emit the Blocked/Unblocked events on any socket except for the one which received the command. The code was previously incorrectly trying to look up a non-existent pending command and thereby ending up not skipping the command socket for the event. We can simplify the code a lot by simply sending the event directly from the command handler functions. We have the reference to the command socket available there which makes it easy to pass to the mgmt_event function for skipping. The only notable side-effect of this is that the old blacklisting ioctl's no-longer cause mgmt events to be emitted, however as user space versions using these ioctl's are not mgmt-aware this is acceptable. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Marcel Holtmann authored
The background scanning normally gets enabled during power on by adding devices to the pending connection list. However devices might be already on that list and the list of devices is empty, then it is better to trigger the background manually. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
When a new controller is initialized, but not powered from userspace at the moment, the HCI_AUTO_OFF flag is still set. During this period, userspace might program device for auto-connection, but never power on the controller. In this case do not try to start background scanning and leave it for later to be started. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Johan Hedberg authored
If we're encrypted with the STK we should allow re-encryption with an LTK even though the achieved security level is the same. This patch adds the necessary logic to the smp_sufficient_security function which is used to determine whether to proceed with encryption or not. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
There are certain subtle differences in behavior when we're encrypted with the STK, such as allowing re-encryption even though the security level stays the same. Because of this, add a flag to track whether we're encrypted with an STK or not. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
If we're already encrypted with a good enough LTK we should just ignore an incoming SMP Security Request. The code was already taking care of this in the smp_conn_security function before calling smp_ltk_encrypt but failed to do the same in smp_cmd_security_req. This patch fixes the issue by moving up the smp_sufficient_security function and using it in the Security Request handler before trying to request encryption. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Marcel Holtmann authored
The Device Found events of the management interface should indicate if it is possible to connect to a remote device or if it is broadcaster only advertising. To allow this differentation the Not Connectable flag is introduced that will be set when it is known that a device can not be connected. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
Providing the flags parameter directly to mgmt_device_found function makes the core simpler and more readable. With this it becomes a lot easier to add new flags in the future. This also changes hci_inquiry_cache_update to just return that flags needed for mgmt_device_found since that is its only use for the two return parameters anyway. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
The advertising data and scan response data are merged in the wrong order. It should be advertsing data first and then scan response data and not the other way around. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org # 3.16
-