Skip to content

L
linux
Switch branch/tag
  1. 23 Jan, 2021 7 commits
    • Jakub Kicinski's avatar
      Merge branch 'fix-and-move-definitions-of-mrp-data-structures' · 853c56b4
      Jakub Kicinski authored 
      Rasmus Villemoes says:

====================
fix and move definitions of MRP data structures

We unnecessarily included packet structures of MRP in a uAPI header.
Turns out that some of them were in fact broken due to lack of packing,
so let's take this chance to remove them completely. Leave it to user
space to create its own, correct definitions. Said structures are not
used in the user space <> kernel communication.
====================

Link: https://lore.kernel.org/r/20210121204037.61390-1-rasmus.villemoes@prevas.dkSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      853c56b4
    • Rasmus Villemoes's avatar
      net: mrp: move struct definitions out of uapi · 67819390
      Rasmus Villemoes authored 
      None of these are actually used in the kernel/userspace interface -
there's a userspace component of implementing MRP, and userspace will
need to construct certain frames to put on the wire, but there's no
reason the kernel should provide the relevant definitions in a UAPI
header.

In fact, some of those definitions were broken until previous commit,
so only keep the few that are actually referenced in the kernel code,
and move them to the br_private_mrp.h header.
Signed-off-by: default avatarRasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      67819390
    • Rasmus Villemoes's avatar
      net: mrp: fix definitions of MRP test packets · dc090de8
      Rasmus Villemoes authored 
      Wireshark says that the MRP test packets cannot be decoded - and the
reason for that is that there's a two-byte hole filled with garbage
between the "transitions" and "timestamp" members.

So Wireshark decodes the two garbage bytes and the top two bytes of
the timestamp written by the kernel as the timestamp value (which thus
fluctuates wildly), and interprets the lower two bytes of the
timestamp as a new (type, length) pair, which is of course broken.

Even though this makes the timestamp field in the struct unaligned, it
actually makes it end up on a 32 bit boundary in the frame as mandated
by the standard, since it is preceded by a two byte TLV header.

The struct definitions live under include/uapi/, but they are not
really part of any kernel<->userspace API/ABI, so fixing the
definitions by adding the packed attribute should not cause any
compatibility issues.
Signed-off-by: default avatarRasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: default avatarHoratiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      dc090de8
    • Pan Bian's avatar
      net: fec: put child node on error path · 0607a2cd
      Pan Bian authored 
      Also decrement the reference count of child device on error path.

Fixes: 3e782985 ("net: ethernet: fec: Allow configuration of MDIO bus speed")
Signed-off-by: default avatarPan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210120122037.83897-1-bianpan2016@163.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      0607a2cd
    • Pan Bian's avatar
      net: stmmac: dwmac-intel-plat: remove config data on error · 3765d86f
      Pan Bian authored 
      Remove the config data when rate setting fails.

Fixes: 9efc9b2b ("net: stmmac: Add dwmac-intel-plat for GBE driver")
Signed-off-by: default avatarPan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210120110745.36412-1-bianpan2016@163.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      3765d86f
    • Kevin Hao's avatar
      net: octeontx2: Make sure the buffer is 128 byte aligned · db280515
      Kevin Hao authored 
      The octeontx2 hardware needs the buffer to be 128 byte aligned.
But in the current implementation of napi_alloc_frag(), it can't
guarantee the return address is 128 byte aligned even the request size
is a multiple of 128 bytes, so we have to request an extra 128 bytes and
use the PTR_ALIGN() to make sure that the buffer is aligned correctly.

Fixes: 7a36e491 ("octeontx2-pf: Use the napi_alloc_frag() to alloc the pool buffers")
Reported-by: default avatarSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: default avatarKevin Hao <haokexin@gmail.com>
Tested-by: default avatarSubbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20210121070906.25380-1-haokexin@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      db280515
    • Giacinto Cifelli's avatar
      net: usb: qmi_wwan: added support for Thales Cinterion PLSx3 modem family · 7e0e63d0
      Giacinto Cifelli authored 
      Bus 003 Device 009: ID 1e2d:006f
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 ?
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x1e2d
  idProduct          0x006f
  bcdDevice            0.00
  iManufacturer           3 Cinterion Wireless Modules
  iProduct                2 PLSx3
  iSerial                 4 fa3c1419
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          303
    bNumInterfaces          9
    bConfigurationValue     1
    iConfiguration          1 Cinterion Configuration
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              500mA
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         0
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         2
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          3
      CDC Union:
        bMasterInterface        2
        bSlaveInterface         3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         4
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        4
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          5
      CDC Union:
        bMasterInterface        4
        bSlaveInterface         5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        5
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x86  EP 6 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         6
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        6
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          7
      CDC Union:
        bMasterInterface        6
        bSlaveInterface         7
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x87  EP 7 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        7
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x88  EP 8 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        8
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x89  EP 9 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x8a  EP 10 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 ?
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Cc: stable@vger.kernel.org
Signed-off-by: default avatarGiacinto Cifelli <gciofono@gmail.com>
Acked-by: default avatarBjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20210120045650.10855-1-gciofono@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      7e0e63d0
  3. 21 Jan, 2021 3 commits
  5. 20 Jan, 2021 20 commits
  7. 19 Jan, 2021 10 commits
    • Tariq Toukan's avatar
      net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled · a3eb4e9d
      Tariq Toukan authored 
      With NETIF_F_HW_TLS_RX packets are decrypted in HW. This cannot be
logically done when RXCSUM offload is off.

Fixes: 14136564 ("net: Add TLS RX offload feature")
Signed-off-by: default avatarTariq Toukan <tariqt@nvidia.com>
Reviewed-by: default avatarBoris Pismenny <borisp@nvidia.com>
Link: https://lore.kernel.org/r/20210117151538.9411-1-tariqt@nvidia.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      a3eb4e9d
    • Jakub Kicinski's avatar
      Merge branch 'ipv4-ensure-ecn-bits-don-t-influence-source-address-validation' · 2565ff4e
      Jakub Kicinski authored 
      Guillaume Nault says:

====================
ipv4: Ensure ECN bits don't influence source address validation

Functions that end up calling fib_table_lookup() should clear the ECN
bits from the TOS, otherwise ECT(0) and ECT(1) packets can be treated
differently.

Most functions already clear the ECN bits, but there are a few cases
where this is not done. This series only fixes the ones related to
source address validation.
====================

Link: https://lore.kernel.org/r/cover.1610790904.git.gnault@redhat.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      2565ff4e
    • Guillaume Nault's avatar
      netfilter: rpfilter: mask ecn bits before fib lookup · 2e5a6266
      Guillaume Nault authored 
      RT_TOS() only masks one of the two ECN bits. Therefore rpfilter_mt()
treats Not-ECT or ECT(1) packets in a different way than those with
ECT(0) or CE.

Reproducer:

  Create two netns, connected with a veth:
  $ ip netns add ns0
  $ ip netns add ns1
  $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
  $ ip -netns ns0 link set dev veth01 up
  $ ip -netns ns1 link set dev veth10 up
  $ ip -netns ns0 address add 192.0.2.10/32 dev veth01
  $ ip -netns ns1 address add 192.0.2.11/32 dev veth10

  Add a route to ns1 in ns0:
  $ ip -netns ns0 route add 192.0.2.11/32 dev veth01

  In ns1, only packets with TOS 4 can be routed to ns0:
  $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10

  Ping from ns0 to ns1 works regardless of the ECN bits, as long as TOS
  is 4:
  $ ip netns exec ns0 ping -Q 4 192.0.2.11   # TOS 4, Not-ECT
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 5 192.0.2.11   # TOS 4, ECT(1)
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 6 192.0.2.11   # TOS 4, ECT(0)
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 7 192.0.2.11   # TOS 4, CE
    ... 0% packet loss ...

  Now use iptable's rpfilter module in ns1:
  $ ip netns exec ns1 iptables-legacy -t raw -A PREROUTING -m rpfilter --invert -j DROP

  Not-ECT and ECT(1) packets still pass:
  $ ip netns exec ns0 ping -Q 4 192.0.2.11   # TOS 4, Not-ECT
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 5 192.0.2.11   # TOS 4, ECT(1)
    ... 0% packet loss ...

  But ECT(0) and ECN packets are dropped:
  $ ip netns exec ns0 ping -Q 6 192.0.2.11   # TOS 4, ECT(0)
    ... 100% packet loss ...
  $ ip netns exec ns0 ping -Q 7 192.0.2.11   # TOS 4, CE
    ... 100% packet loss ...

After this patch, rpfilter doesn't drop ECT(0) and CE packets anymore.

Fixes: 8f97339d ("netfilter: add ipv4 reverse path filter match")
Signed-off-by: default avatarGuillaume Nault <gnault@redhat.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      2e5a6266
    • Guillaume Nault's avatar
      udp: mask TOS bits in udp_v4_early_demux() · 8d2b51b0
      Guillaume Nault authored 
      udp_v4_early_demux() is the only function that calls
ip_mc_validate_source() with a TOS that hasn't been masked with
IPTOS_RT_MASK.

This results in different behaviours for incoming multicast UDPv4
packets, depending on if ip_mc_validate_source() is called from the
early-demux path (udp_v4_early_demux) or from the regular input path
(ip_route_input_noref).

ECN would normally not be used with UDP multicast packets, so the
practical consequences should be limited on that side. However,
IPTOS_RT_MASK is used to also masks the TOS' high order bits, to align
with the non-early-demux path behaviour.

Reproducer:

  Setup two netns, connected with veth:
  $ ip netns add ns0
  $ ip netns add ns1
  $ ip -netns ns0 link set dev lo up
  $ ip -netns ns1 link set dev lo up
  $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
  $ ip -netns ns0 link set dev veth01 up
  $ ip -netns ns1 link set dev veth10 up
  $ ip -netns ns0 address add 192.0.2.10 peer 192.0.2.11/32 dev veth01
  $ ip -netns ns1 address add 192.0.2.11 peer 192.0.2.10/32 dev veth10

  In ns0, add route to multicast address 224.0.2.0/24 using source
  address 198.51.100.10:
  $ ip -netns ns0 address add 198.51.100.10/32 dev lo
  $ ip -netns ns0 route add 224.0.2.0/24 dev veth01 src 198.51.100.10

  In ns1, define route to 198.51.100.10, only for packets with TOS 4:
  $ ip -netns ns1 route add 198.51.100.10/32 tos 4 dev veth10

  Also activate rp_filter in ns1, so that incoming packets not matching
  the above route get dropped:
  $ ip netns exec ns1 sysctl -wq net.ipv4.conf.veth10.rp_filter=1

  Now try to receive packets on 224.0.2.11:
  $ ip netns exec ns1 socat UDP-RECVFROM:1111,ip-add-membership=224.0.2.11:veth10,ignoreeof -

  In ns0, send packet to 224.0.2.11 with TOS 4 and ECT(0) (that is,
  tos 6 for socat):
  $ echo test0 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6

  The "test0" message is properly received by socat in ns1, because
  early-demux has no cached dst to use, so source address validation
  is done by ip_route_input_mc(), which receives a TOS that has the
  ECN bits masked.

  Now send another packet to 224.0.2.11, still with TOS 4 and ECT(0):
  $ echo test1 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6

  The "test1" message isn't received by socat in ns1, because, now,
  early-demux has a cached dst to use and calls ip_mc_validate_source()
  immediately, without masking the ECN bits.

Fixes: bc044e8d ("udp: perform source validation for mcast early demux")
Signed-off-by: default avatarGuillaume Nault <gnault@redhat.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      8d2b51b0
    • Maxim Mikityanskiy's avatar
      xsk: Clear pool even for inactive queues · b425e24a
      Maxim Mikityanskiy authored 
      The number of queues can change by other means, rather than ethtool. For
example, attaching an mqprio qdisc with num_tc > 1 leads to creating
multiple sets of TX queues, which may be then destroyed when mqprio is
deleted. If an AF_XDP socket is created while mqprio is active,
dev->_tx[queue_id].pool will be filled, but then real_num_tx_queues may
decrease with deletion of mqprio, which will mean that the pool won't be
NULLed, and a further increase of the number of TX queues may expose a
dangling pointer.

To avoid any potential misbehavior, this commit clears pool for RX and
TX queues, regardless of real_num_*_queues, still taking into
consideration num_*_queues to avoid overflows.

Fixes: 1c1efc2a ("xsk: Create and free buffer pool independently from umem")
Fixes: a41b4f3c ("xsk: simplify xdp_clear_umem_at_qid implementation")
Signed-off-by: default avatarMaxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarBjörn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20210118160333.333439-1-maximmi@mellanox.com
      b425e24a
    • Linus Torvalds's avatar
      Merge tag 'task_work-2021-01-19' of git://git.kernel.dk/linux-block · 45dfb8a5
      Linus Torvalds authored 
      Pull task_work fix from Jens Axboe:
 "The TIF_NOTIFY_SIGNAL change inadvertently removed the unconditional
  task_work run we had in get_signal().

  This caused a regression for some setups, since we're relying on eg
  ____fput() being run to close and release, for example, a pipe and
  wake the other end.

  For 5.11, I prefer the simple solution of just reinstating the
  unconditional run, even if it conceptually doesn't make much sense -
  if you need that kind of guarantee, you should be using TWA_SIGNAL
  instead of TWA_NOTIFY. But it's the trivial fix for 5.11, and would
  ensure that other potential gotchas/assumptions for task_work don't
  regress for 5.11.

  We're looking into further simplifying the task_work notifications for
  5.12 which would resolve that too"

* tag 'task_work-2021-01-19' of git://git.kernel.dk/linux-block:
  task_work: unconditionally run task_work from get_signal()
      45dfb8a5
    • Mircea Cirjaliu's avatar
      bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback · 301a33d5
      Mircea Cirjaliu authored 
      I assume this was obtained by copy/paste. Point it to bpf_map_peek_elem()
instead of bpf_map_pop_elem(). In practice it may have been less likely
hit when under JIT given shielded via 84430d42 ("bpf, verifier: avoid
retpoline for map push/pop/peek operation").

Fixes: f1a2e44a ("bpf: add queue and stack maps")
Signed-off-by: default avatarMircea Cirjaliu <mcirjaliu@bitdefender.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Cc: Mauricio Vasquez <mauriciovasquezbernal@gmail.com>
Link: https://lore.kernel.org/bpf/AM7PR02MB6082663DFDCCE8DA7A6DD6B1BBA30@AM7PR02MB6082.eurprd02.prod.outlook.com
      301a33d5
    • Linus Torvalds's avatar
      Merge tag 'nfsd-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux · f419f031
      Linus Torvalds authored 
      Pull nfsd fixes from Chuck Lever:

 - Avoid exposing parent of root directory in NFSv3 READDIRPLUS results

 - Fix a tracepoint change that went in the initial 5.11 merge

* tag 'nfsd-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Move the svc_xdr_recvfrom tracepoint again
  nfsd4: readdirplus shouldn't return parent of export
      f419f031
    • Linus Torvalds's avatar
      Merge tag 'hyperv-fixes-signed-20210119' of... · 28df8580
      Linus Torvalds authored 
      Merge tag 'hyperv-fixes-signed-20210119' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fix from Wei Liu:
 "One patch from Dexuan to fix clockevent initialization"

* tag 'hyperv-fixes-signed-20210119' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Initialize clockevents after LAPIC is initialized
      28df8580
    • Jakub Kicinski's avatar
      Merge branch 'sh_eth-fix-reboot-crash' · f7b9820d
      Jakub Kicinski authored 
      Geert Uytterhoeven says:

====================
sh_eth: Fix reboot crash

This patch fixes a regression v5.11-rc1, where rebooting while a sh_eth
device is not opened will cause a crash.

Changes compared to v1:
  - Export mdiobb_{read,write}(),
  - Call mdiobb_{read,write}() now they are exported,
  - Use mii_bus.parent to avoid bb_info.dev copy,
  - Drop RFC state.

Alternatively, mdio-bitbang could provide Runtime PM-aware wrappers
itself, and use them either manually (through a new parameter to
alloc_mdio_bitbang(), or a new alloc_mdio_bitbang_*() function), or
automatically (e.g. if pm_runtime_enabled() returns true).  Note that
the latter requires a "struct device *" parameter to operate on.
Currently there are only two drivers that call alloc_mdio_bitbang() and
use Runtime PM: the Renesas sh_eth and ravb drivers.  This series fixes
the former, while the latter is not affected (it keeps the device
powered all the time between driver probe and driver unbind, and
changing that seems to be non-trivial).
====================

Link: https://lore.kernel.org/r/20210118150656.796584-1-geert+renesas@glider.beSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      f7b9820d
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7