- 25 May, 2011 15 commits
-
-
Randy Dunlap authored
Fix data truncation warnings: .manfid is not unsigned long: drivers/mmc/core/quirks.c:36: warning: large integer implicitly truncated to unsigned type drivers/mmc/core/quirks.c:40: warning: large integer implicitly truncated to unsigned type drivers/mmc/core/quirks.c:43: warning: large integer implicitly truncated to unsigned type drivers/mmc/core/quirks.c:46: warning: large integer implicitly truncated to unsigned type Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Chris Ball <cjb@laptop.org>
-
Andrei Warkentin authored
The current mechanism is SDIO-only. This allows us to create function-specific quirks, without creating messy Kconfig dependencies, or polluting core/ with function-specific code. Signed-off-by:
Andrei Warkentin <andreiw@motorola.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Wolfram Sang authored
led_trigger_register_simple() allocates memory which must not be leaked in the error-path of mmc_add_host. Move it past the only error-check in the function. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
-
Ameya Palande authored
This patch fixes 21 errors and 6 warnings reported by checkpatch.pl. Signed-off-by:
Ameya Palande <2ameya@gmail.com> Reviewed-by:
-
Ohad Ben-Cohen authored
The wl12xx device supports disconnecting the pull-up resistor on CD/DAT[3] (pin 1) of the card. Tell SDIO core to disconnect that resistor during card init, since we don't need it at that point (and anyway all hosts shall provide pull-up resistors on all data lines DAT[3:0] as described in section 6 of the SD physical specification). As a result, this may save some power, but it's also generally healthy since it prevents both ends from pulling up that pin, which results in undesirable asymmetric physical bus. Signed-off-by:
Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by:
-
Ohad Ben-Cohen authored
006ebd5d introduced sdio_disable_cd(), which disconnects the pull-up resistor on CD/DAT[3] (pin 1) of the card. Make it possible to start using sdio_disable_cd() by introducing MMC_QUIRK_DISABLE_CD. Signed-off-by:
-
Ohad Ben-Cohen authored
Tell SDIO core to ignore the standard SDIO function interface codes indicated by the wl1271. This is required because the wl1271 erroneously indicates its first function as a standard Bluetooth SDIO interface, and that drives btsdio mad. Signed-off-by:
-
Ohad Ben-Cohen authored
Introduce MMC_QUIRK_NONSTD_FUNC_IF to ignore the "SDIO Standard Function interface code" as indicated by the card's FBR, and instead treat all functions as non-standard interfaces. This is required to prevent standard drivers from facing errors when trying to communicate with SDIO cards that erroneously indicate standard function interface codes. Signed-off-by:
-
Ohad Ben-Cohen authored
6b5eda36 followed SDIO spec part E1 section 8, which states that in case SDIO interrupts are being used to wake up a suspended host, then it is required to switch to 1-bit mode before stopping the clock. Before switching to 1-bit mode (or back to 4-bit mode on resume), make sure that SDIO interrupts are really being used to wake the host. This is helpful for devices which have an external irq line (e.g. wl1271), and do not use SDIO interrupts to wake up the host. In this case, switching to 1-bit mode (and back to 4-bit mode on resume) is not necessary. Reported-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
-
Ohad Ben-Cohen authored
mmc_card_is_powered_resumed is a mouthful; instead, simply use mmc_card_keep_power, which also better explains the purpose of the macro. Employ mmc_card_keep_power() where possible. Signed-off-by:
-
Andrei Warkentin authored
Allows reliable writes to be used for MMC writes. Reliable writes are used to service write REQ_FUA/REQ_META requests. Handles both the legacy and the enhanced reliable write support in MMC cards. Signed-off-by:
-
Shawn Guo authored
This config option is used to decide whether tegra sdhci support should be build into the sdhci-platform module. So setting it 'm' is nonsense, since we can't build part of an module as a module. The effect for 'm' will probably be the same as for 'n'. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Venkat Rao authored
Enable fast bcm4329 WIFI suspend/resume on Tegra2 board. This patch allows the mach-tegra support to tell the tegra MMC host controller to NOT turn off power for the MMC controller the WIFI part lives behind. Thus bcm4329 firmware doesn't need to be reloaded. Signed-off-by:
Venkat Rao <vrao@broadcom.com> Tested-by:
Grant Grundler <grundler@chromium.org> Reviewed-by:
Olof Johansson <olof@lixom.net> Acked-by:
-
John Ogness authored
There is no need to disable irq's when using the sg_copy_*_buffer() functions because those functions do that already. There are also no races for the mm_queue struct here that would require the irq's to be disabled before calling sg_copy_*_buffer(). Signed-off-by:
John Ogness <john.ogness@linutronix.de> Signed-off-by:
-
Philip Rakity authored
uBoot sometimes leaves eMMC pointing to the private boot partition. Ensure we always start looking at the user partition. Signed-off-by:
Philip Rakity <prakity@marvell.com> Signed-off-by:
Bruce Clemens <bpclemens@marvell.com> Signed-off-by:
Mark F. Brown <markb@marvell.com> Signed-off-by:
-
- 16 May, 2011 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: Take lock around probes for drm_fb_helper_hotplug_event drm/i915: Revert i915.semaphore=1 default from 47ae63e0 vga_switcheroo: don't toggle-switch devices drm/radeon/kms: add some evergreen/ni safe regs drm/radeon/kms: fix extended lvds info parsing drm/radeon/kms: fix tiling reg on fusion
-
Chris Wilson authored
We need to hold the dev->mode_config.mutex whilst detecting the output status. But we also need to drop it for the call into drm_fb_helper_single_fb_probe(), which indirectly acquires the lock when attaching the fbcon. Failure to do so exposes a race with normal output probing. Detected by adding some warnings that the mutex is held to the backend detect routines: [ 17.772456] WARNING: at drivers/gpu/drm/i915/intel_crt.c:471 intel_crt_detect+0x3e/0x373 [i915]() [ 17.772458] Hardware name: Latitude E6400 [ 17.772460] Modules linked in: .... [ 17.772582] Pid: 11, comm: kworker/0:1 Tainted: G W 2.6.38.4-custom.2 #8 [ 17.772584] Call Trace: [ 17.772591] [<ffffffff81046af5>] ? warn_slowpath_common+0x78/0x8c [ 17.772603] [<ffffffffa03f3e5c>] ? intel_crt_detect+0x3e/0x373 [i915] [ 17.772612] [<ffffffffa0355d49>] ? drm_helper_probe_single_connector_modes+0xbf/0x2af [drm_kms_helper] [ 17.772619] [<ffffffffa03534d5>] ? drm_fb_helper_probe_connector_modes+0x39/0x4d [drm_kms_helper] [ 17.772625] [<ffffffffa0354760>] ? drm_fb_helper_hotplug_event+0xa5/0xc3 [drm_kms_helper] [ 17.772633] [<ffffffffa035577f>] ? output_poll_execute+0x146/0x17c [drm_kms_helper] [ 17.772638] [<ffffffff81193c01>] ? cfq_init_queue+0x247/0x345 [ 17.772644] [<ffffffffa0355639>] ? output_poll_execute+0x0/0x17c [drm_kms_helper] [ 17.772648] [<ffffffff8105b540>] ? process_one_work+0x193/0x28e [ 17.772652] [<ffffffff8105c6bc>] ? worker_thread+0xef/0x172 [ 17.772655] [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172 [ 17.772658] [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172 [ 17.772663] [<ffffffff8105f767>] ? kthread+0x7a/0x82 [ 17.772668] [<ffffffff8100a724>] ? kernel_thread_helper+0x4/0x10 [ 17.772671] [<ffffffff8105f6ed>] ? kthread+0x0/0x82 [ 17.772674] [<ffffffff8100a720>] ? kernel_thread_helper+0x0/0x10 Reported-by:
Frederik Himpe <fhimpe@telenet.be> References: https://bugs.freedesktop.org/show_bug.cgi?id=36394Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- 15 May, 2011 3 commits
-
-
Andy Lutomirski authored
My Q67 / i7-2600 box has rev09 Sandy Bridge graphics. It hangs instantly when GNOME loads and it hangs so hard the reset button doesn't work. Setting i915.semaphore=0 fixes it. Semaphores were disabled in a1656b90 in 2.6.38 and were re-enabled by commit 47ae63e0 Merge: c59a333f 467cffba Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Mar 7 12:32:44 2011 +0000 Merge branch 'drm-intel-fixes' into drm-intel-next Apply the trivial conflicting regression fixes, but keep GPU semaphores enabled. Conflicts: drivers/gpu/drm/i915/i915_drv.h drivers/gpu/drm/i915/i915_gem_execbuffer.c (It's worth noting that the offending change is i915_drv.c, which is not a conflict.) Signed-off-by:
Andy Lutomirski <luto@mit.edu> Acked-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
Florian Mickler authored
If the requested device is already active, ignore the request. This restores the original behaviour of the interface. The change was probably an unintended side effect of commit 66b37c67 vga_switcheroo: split switching into two stages which did not take into account to duplicate the !active check in the split-off stage2. Fix this by factoring that check out of stage1 into the debugfs_write routine. References: https://bugzilla.kernel.org/show_bug.cgi?id=34252Reported-by:
Igor Murzov <e-mail@date.by> Tested-by:
Florian Mickler <florian@mickler.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix FS_IOC_SETFLAGS ioctl Btrfs: fix FS_IOC_GETFLAGS ioctl fs: remove FS_COW_FL Btrfs: fix easily get into ENOSPC in mixed case Prevent oopsing in posix_acl_valid()
-
- 14 May, 2011 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: fix split bio handling rbd: fix leak of ops struct
-
Li Zefan authored
Steps to reproduce the bug: - Call FS_IOC_SETLFAGS ioctl with flags=FS_COMPR_FL - Call FS_IOC_SETFLAGS ioctl with flags=0 - Call FS_IOC_GETFLAGS ioctl, and you'll see FS_COMPR_FL is still set! Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Li Zefan authored
As we've added per file compression/cow support. Signed-off-by:
-
Li Zefan authored
FS_COW_FL and FS_NOCOW_FL were newly introduced to control per file COW in btrfs, but FS_NOCOW_FL is sufficient. The fact is we don't have corresponding BTRFS_INODE_COW flag. COW is default, and FS_NOCOW_FL can be used to switch off COW for a single file. If we mount btrfs with nodatacow, a newly created file will be set with the FS_NOCOW_FL flag. So to turn on COW for it, we can just clear the FS_NOCOW_FL flag. Signed-off-by:
-
liubo authored
When a btrfs disk is created by mixed data & metadata option, it will have no pure data or pure metadata space info. In btrfs's for-linus branch, commit 78b1ea13838039cd88afdd62519b40b344d6c920 (Btrfs: fix OOPS of empty filesystem after balance) initializes space infos at the very beginning. The problem is this initialization does not take the mixed case into account, which will cause btrfs will easily get into ENOSPC in mixed case. Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
-
Daniel J Blueman authored
If posix_acl_from_xattr() returns an error code, a negative address is dereferenced causing an oops; fix by checking for error code first. Signed-off-by:
Daniel J Blueman <daniel.blueman@gmail.com> Reviewed-by:
Josef Bacik <josef@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: fix oops when LPM is used with PMP
-
Hugh Dickins authored
Shame on me! Commit b1dea800 "tmpfs: fix race between umount and writepage" fixed the advertized race, but introduced another: as even its comment makes clear, we cannot safely rely on a peek at list_empty() while holding no lock - until info->swapped is set, shmem_unuse_inode() may delete any formerly-swapped inode from the shmem_swaplist, which in this case would leave a swap area impossible to swapoff. Although I don't relish taking the mutex every time, I don't care much for the alternatives either; and at least the peek at list_empty() in shmem_evict_inode() (a hotter path since most inodes would never have been swapped) remains safe, because we already truncated the whole file. Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Tejun Heo authored
ae01b249 (libata: Implement ATA_FLAG_NO_DIPM and apply it to mcp65) added ATA_FLAG_NO_DIPM and made ata_eh_set_lpm() check the flag. However, @ap is NULL if @link points to a PMP link and thus the unconditional @ap->flags dereference leads to the following oops. BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510 ... Pid: 295, comm: scsi_eh_4 Tainted: P 2.6.38.5-core2 #1 System76, Inc. Serval Professional/Serval Professional RIP: 0010:[<ffffffff813f98e1>] [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510 RSP: 0018:ffff880132defbf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880132f40000 RCX: 0000000000000000 RDX: ffff88013377c000 RSI: ffff880132f40000 RDI: 0000000000000000 RBP: ffff880132defce0 R08: ffff88013377dc58 R09: ffff880132defd98 R10: 0000000000000000 R11: 00000000ffffffff R12: 0000000000000000 R13: 0000000000000000 R14: ffff88013377c000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8800bf700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000018 CR3: 0000000001a03000 CR4: 00000000000406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process scsi_eh_4 (pid: 295, threadinfo ffff880132dee000, task ffff880133b416c0) Stack: 0000000000000000 ffff880132defcc0 0000000000000000 ffff880132f42738 ffffffff813ee8f0 ffffffff813eefe0 ffff880132defd98 ffff88013377f190 ffffffffa00b3e30 ffffffff813ef030 0000000032defc60 ffff880100000000 Call Trace: [<ffffffff81400867>] sata_pmp_error_handler+0x607/0xc30 [<ffffffffa00b273f>] ahci_error_handler+0x1f/0x70 [libahci] [<ffffffff813faade>] ata_scsi_error+0x5be/0x900 [<ffffffff813cf724>] scsi_error_handler+0x124/0x650 [<ffffffff810834b6>] kthread+0x96/0xa0 [<ffffffff8100cd64>] kernel_thread_helper+0x4/0x10 Code: 8b 95 70 ff ff ff b8 00 00 00 00 48 3b 9a 10 2e 00 00 48 0f 44 c2 48 89 85 70 ff ff ff 48 8b 8d 70 ff ff ff f6 83 69 02 00 00 01 <48> 8b 41 18 0f 85 48 01 00 00 48 85 c9 74 12 48 8b 51 08 48 83 RIP [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510 RSP <ffff880132defbf0> CR2: 0000000000000018 Fix it by testing @link->ap->flags instead. stable: ATA_FLAG_NO_DIPM was added during 2.6.39 cycle but was backported to 2.6.37 and 38. This is a fix for that and thus also applicable to 2.6.37 and 38. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
"Nathan A. Mourey II" <nmoureyii@ne.rr.com> LKML-Reference: <1304555277.2059.2.camel@localhost.localdomain> Cc: Connor H <cmdkhh@gmail.com> Cc: stable@kernel.org Signed-off-by:
Jeff Garzik <jgarzik@pobox.com>
-
Linus Torvalds authored
* fbmem: Further fbcon sanity checking fbmem: fix remove_conflicting_framebuffers races
-
Tejun Heo authored
This reverts commit 270dac35. The commits causes command timeouts on AC plug/unplug. It isn't yet clear why. As the commit was for a single rather obscure controller, revert the change for now. The problem was reported and bisected by Gu Rui in bug#34692. https://bugzilla.kernel.org/show_bug.cgi?id=34692 Also, reported by Rafael and Michael in the following thread. http://thread.gmane.org/gmane.linux.kernel/1138771Signed-off-by:
Gu Rui <chaos.proton@gmail.com> Reported-by:
Rafael J. Wysocki <rjw@sisk.pl> Reported-by:
Michael Leun <lkml20100708@newton.leun.net> Cc: Jian Peng <jipeng2005@gmail.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
-
Bruno Prémont authored
This moves the if (num_registered_fb == FB_MAX) return -ENXIO; check _AFTER_ the call to do_remove_conflicting_framebuffers() as this would (now in a safe way) allow a native driver to replace the conflicting one even if all slots in registered_fb[] are taken. This also prevents unregistering a framebuffer that is no longer registered (vga16f will unregister at module unload time even if the frame buffer had been unregistered earlier due to being found conflicting). Signed-off-by:Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by:
-
Linus Torvalds authored
When a register_framebuffer() call results in us removing old conflicting framebuffers, the new registration_lock doesn't protect that situation. And we can't just add the same locking to the function, because these functions call each other: register_framebuffer() calls remove_conflicting_framebuffers, which in turn calls unregister_framebuffer for any conflicting entry. In order to fix it, this just creates wrapper functions around all three functions and makes the versions that actually do the work be called "do_xxx()", leaving just the wrapper that gets the lock and calls the worker function. So the rule becomes simply that "do_xxxx()" has to be called with the lock held, and now do_register_framebuffer() can just call do_remove_conflicting_framebuffers(), and that in turn can call _do_unregister_framebuffer(), and there is no deadlock, and we can hold the registration lock over the whole sequence, fixing the races. It also makes error cases simpler, and fixes one situation where we would return from unregister_framebuffer() without releasing the lock, pointed out by Bruno Prémont. Tested-by:
Anca Emanuel <anca.emanuel@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: Wire up syscalls new to 2.6.39 alpha: convert to clocksource_register_hz
-
- 13 May, 2011 6 commits
-
-
Michael Cree authored
Wire up the syscalls: name_to_handle_at open_by_handle_at clock_adjtime syncfs and adjust some whitespace in the neighbourhood to align commments. Signed-off-by:
Michael Cree <mcree@orcon.net.nz> Signed-off-by:
Matt Turner <mattst88@gmail.com>
-
John Stultz authored
Converts alpha to use clocksource_register_hz. Signed-off-by:
John Stultz <johnstul@us.ibm.com> CC: Richard Henderson <rth@twiddle.net> CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> CC: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: bridge: fix forwarding of IPv6 bonding,llc: Fix structure sizeof incompatibility for some PDUs ipv6: restore correct ECN handling on TCP xmit ne-h8300: Fix regression caused during net_device_ops conversion hydra: Fix regression caused during net_device_ops conversion zorro8390: Fix regression caused during net_device_ops conversion sfc: Always map MCDI shared memory as uncacheable ehea: Fix memory hotplug oops libertas: fix cmdpendingq locking iwlegacy: fix IBSS mode crashes ath9k: Fix a warning due to a queued work during S3 state mac80211: don't start the dynamic ps timer if not associated
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds authored
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFSv4.1: Ensure that layoutget uses the correct gfp modes NFSv4.1: remove pnfs_layout_hdr from pnfs_destroy_all_layouts tmp_list NFSv41: Resend on NFS4ERR_RETRY_UNCACHED_REP
-
Yehuda Sadeh authored
The rbd driver currently splits bios when they span an object boundary. However, the blk_end_request expects the completions to roll up the results in block device order, and the split rbd/ceph ops can complete in any order. This patch adds a struct rbd_req_coll to track completion of split requests and ensures that the results are passed back up to the block layer in order. This fixes errors where the file system gets completion of a read operation that spans an object boundary before the data has actually arrived. The bug is easily reproduced with iozone with a working set larger than available RAM. Reported-by:
Fyodor Ustinov <ufm@ufm.su> Signed-off-by:
Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by:
Sage Weil <sage@newdream.net>
-
Stephen Hemminger authored
The commit 6b1e960f bridge: Reset IPCB when entering IP stack on NF_FORWARD broke forwarding of IPV6 packets in bridge because it would call bp_parse_ip_options with an IPV6 packet. Reported-by:
Noah Meyerhans <noahm@debian.org> Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Reviewed-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
