An error occurred fetching the project authors.
- 14 Feb, 2024 26 commits
-
-
Joe Damato authored
Allow busy polling on a per-epoll context basis. The per-epoll context usec timeout value is preferred, but the pre-existing system wide sysctl value is still supported if it specified. busy_poll_usecs is a u32, but in a follow up patch the ioctl provided to the user only allows setting a value from 0 to S32_MAX. Signed-off-by:
Joe Damato <jdamato@fastly.com> Acked-by:
Stanislav Fomichev <sdf@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kamal Heib authored
There is no point in initializing an ndo to NULL, therefore the assignment is redundant and can be removed. Signed-off-by:
Kamal Heib <kheib@redhat.com> Reviewed-by:
Brett Creeley <brett.creeley@amd.com> Acked-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
-
Hariprasad Kelam authored
Packet ingress and egress MAC/serdes channel numbers are configurable on CN10K series of silicons. These channel numbers inturn used while installing MCAM rules to match ingress/egress port. Fetch these channel numbers from firmware at driver init time. Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-02-12 (ice) This series contains updates to ice driver only. Grzegorz adds support for E825-C devices. Wojciech reworks devlink reload to fulfill expected conditions (remove and readd). ==================== Signed-off-by: -
David S. Miller authored
Merge tag 'linux-can-next-for-6.9-20240213' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== linux-can-next-for-6.9-20240213 this is a pull request of 23 patches for net-next/master. The first patch is by Nicolas Maier and targets the CAN Broadcast Manager (bcm), it adds message flags to distinguish between own local and remote traffic. Oliver Hartkopp contributes a patch for the CAN ISOTP protocol that adds dynamic flow control parameters. Stefan Mätje's patch series add support for the esd PCIe/402 CAN interface family. Markus Schneider-Pargmann contributes 14 patches for the m_can to optimize for the SPI attached tcan4x5x controller. A patch by Vincent Mailhol replaces Wolfgang Grandegger by Vincent Mailhol as the CAN drivers Co-Maintainer. Jimmy Assarsson's patch add support for the Kvaser M.2 PCIe 4xCAN adapter. A patch by Daniil Dulov removed a redundant NULL check in the softing driver. Oliver Hartkopp contributes a patch to add CANXL virtual CAN network identifier support. A patch by myself removes Naga Sureshkumar Relli as the maintainer of the xilinx_can driver, as their email bounces. ==================== Signed-off-by:
-
Jakub Kicinski authored
Lorenzo Bianconi says: ==================== add multi-buff support for xdp running in generic mode Introduce multi-buffer support for xdp running in generic mode not always linearizing the skb in netif_receive_generic_xdp routine. Introduce generic percpu page_pools allocator. ==================== Link: https://lore.kernel.org/r/cover.1707729884.git.lorenzo@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Lorenzo Bianconi authored
Rely on skb_pp_cow_data utility routine and remove duplicated code. Acked-by:
Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by:
Toke Hoiland-Jorgensen <toke@redhat.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/029cc14cce41cb242ee7efdcf32acc81f1ce4e9f.1707729884.git.lorenzo@kernel.orgSigned-off-by:
-
Lorenzo Bianconi authored
Similar to native xdp, do not always linearize the skb in netif_receive_generic_xdp routine but create a non-linear xdp_buff to be processed by the eBPF program. This allow to add multi-buffer support for xdp running in generic mode. Acked-by:
-
Lorenzo Bianconi authored
Rely on skb pointer reference instead of the skb pointer in do_xdp_generic and netif_receive_generic_xdp routine signatures. This is a preliminary patch to add multi-buff support for xdp running in generic mode where we will need to reallocate the skb to avoid linearization and we will need to make it visible to do_xdp_generic() caller. Acked-by:
-
Lorenzo Bianconi authored
Introduce generic percpu page_pools allocator. Moreover add page_pool_create_percpu() and cpuid filed in page_pool struct in order to recycle the page in the page_pool "hot" cache if napi_pp_put_page() is running on the same cpu. This is a preliminary patch to add xdp multi-buff support for xdp running in generic mode. Acked-by:
-
Luiz Angelo Daros de Luca authored
While no supported devices currently utilize EXT0, the register reserves the bits for an EXT0. EXT0 is utilized by devices from the generation prior to rtl8365mb, such as those supported by the driver library rtl8367b. Signed-off-by:
Luiz Angelo Daros de Luca <luizluca@gmail.com> Reviewed-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240212-realtek-fix_ext0-v1-1-f3d2536d191a@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Heiner Kallweit says: ==================== r8169: extend EEE tx idle timer support This series extends EEE tx idle timer support, and exposes the timer value to userspace. ==================== Link: https://lore.kernel.org/r/89a5fef5-a4b7-4d5d-9c35-764248be5a19@gmail.comSigned-off-by:
-
Heiner Kallweit authored
Add support for returning the tx_lpi_timer value to userspace. This is supported by few chip versions only: RTL8168h/RTL8125/RTL8126 Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/4eee9c34-c5d6-4c96-9b05-455896dea59a@gmail.comSigned-off-by:
-
Heiner Kallweit authored
Support setting the EEE tx idle timer also on RTL8168h. Signed-off-by:
-
Heiner Kallweit authored
Add a generic setter for the EEE tx idle timer and use it with all RTL8125/RTL8126 chip versions, in line with the vendor driver. This prepares for adding EEE tx idle timer support for additional chip versions. Signed-off-by:
-
Heiner Kallweit authored
This adds LED support for RTL8125/RTL8126. Note: Due to missing datasheets changing the 5Gbps link mode isn't supported for RTL8126. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Qualcomm Atheros AR9331 built-in switch bindings to DT schema. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20240212182911.233819-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Csókás Bence authored
FEC_ENET_FCE is the Flow Control Enable bit (bit 5) of the RCR. This is now defined as FEC_RCR_FLOWCTL. Signed-off-by:
Csókás Bence <csokas.bence@prolan.hu> Reviewed-by:
-
Csókás Bence authored
Add defines for bits of ECR, RCR control registers, TX watermark etc. Signed-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== net: adopt netdev_lockdep_set_classes() Instead of waiting for syzbot to discover lockdep false positives, make sure we use netdev_lockdep_set_classes() a bit more. ==================== Link: https://lore.kernel.org/r/20240212140700.2795436-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
Based on a syzbot report, it appears many virtual drivers do not yet use netdev_lockdep_set_classes(), triggerring lockdep false positives. WARNING: possible recursive locking detected 6.8.0-rc4-next-20240212-syzkaller #0 Not tainted syz-executor.0/19016 is trying to acquire lock: ffff8880162cb298 (_xmit_ETHER#2){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff8880162cb298 (_xmit_ETHER#2){+.-.}-{2:2}, at: __netif_tx_lock include/linux/netdevice.h:4452 [inline] ffff8880162cb298 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x1c4/0x5f0 net/sched/sch_generic.c:340 but task is already holding lock: ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: __netif_tx_lock include/linux/netdevice.h:4452 [inline] ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x1c4/0x5f0 net/sched/sch_generic.c:340 other info that might help us debug this: Possible unsafe locking scenario: CPU0 lock(_xmit_ETHER#2); lock(_xmit_ETHER#2); *** DEADLOCK *** May be due to missing lock nesting notation 9 locks held by syz-executor.0/19016: #0: ffffffff8f385208 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock net/core/rtnetlink.c:79 [inline] #0: ffffffff8f385208 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x82c/0x1040 net/core/rtnetlink.c:6603 #1: ffffc90000a08c00 ((&in_dev->mr_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0xc0/0x600 kernel/time/timer.c:1697 #2: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline] #2: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline] #2: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1360 net/ipv4/ip_output.c:228 #3: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: local_bh_disable include/linux/bottom_half.h:20 [inline] #3: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: rcu_read_lock_bh include/linux/rcupdate.h:802 [inline] #3: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x2c4/0x3b10 net/core/dev.c:4284 #4: ffff8880416e3258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: spin_trylock include/linux/spinlock.h:361 [inline] #4: ffff8880416e3258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: qdisc_run_begin include/net/sch_generic.h:195 [inline] #4: ffff8880416e3258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_xmit_skb net/core/dev.c:3771 [inline] #4: ffff8880416e3258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x1262/0x3b10 net/core/dev.c:4325 #5: ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #5: ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: __netif_tx_lock include/linux/netdevice.h:4452 [inline] #5: ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x1c4/0x5f0 net/sched/sch_generic.c:340 #6: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline] #6: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline] #6: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1360 net/ipv4/ip_output.c:228 #7: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: local_bh_disable include/linux/bottom_half.h:20 [inline] #7: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: rcu_read_lock_bh include/linux/rcupdate.h:802 [inline] #7: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x2c4/0x3b10 net/core/dev.c:4284 #8: ffff888014d9d258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: spin_trylock include/linux/spinlock.h:361 [inline] #8: ffff888014d9d258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: qdisc_run_begin include/net/sch_generic.h:195 [inline] #8: ffff888014d9d258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_xmit_skb net/core/dev.c:3771 [inline] #8: ffff888014d9d258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x1262/0x3b10 net/core/dev.c:4325 stack backtrace: CPU: 1 PID: 19016 Comm: syz-executor.0 Not tainted 6.8.0-rc4-next-20240212-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 check_deadlock kernel/locking/lockdep.c:3062 [inline] validate_chain+0x15c1/0x58e0 kernel/locking/lockdep.c:3856 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e4/0x530 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] __netif_tx_lock include/linux/netdevice.h:4452 [inline] sch_direct_xmit+0x1c4/0x5f0 net/sched/sch_generic.c:340 __dev_xmit_skb net/core/dev.c:3784 [inline] __dev_queue_xmit+0x1912/0x3b10 net/core/dev.c:4325 neigh_output include/net/neighbour.h:542 [inline] ip_finish_output2+0xe66/0x1360 net/ipv4/ip_output.c:235 iptunnel_xmit+0x540/0x9b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x20ee/0x2960 net/ipv4/ip_tunnel.c:831 erspan_xmit+0x9de/0x1460 net/ipv4/ip_gre.c:720 __netdev_start_xmit include/linux/netdevice.h:4989 [inline] netdev_start_xmit include/linux/netdevice.h:5003 [inline] xmit_one net/core/dev.c:3555 [inline] dev_hard_start_xmit+0x242/0x770 net/core/dev.c:3571 sch_direct_xmit+0x2b6/0x5f0 net/sched/sch_generic.c:342 __dev_xmit_skb net/core/dev.c:3784 [inline] __dev_queue_xmit+0x1912/0x3b10 net/core/dev.c:4325 neigh_output include/net/neighbour.h:542 [inline] ip_finish_output2+0xe66/0x1360 net/ipv4/ip_output.c:235 igmpv3_send_cr net/ipv4/igmp.c:723 [inline] igmp_ifc_timer_expire+0xb71/0xd90 net/ipv4/igmp.c:813 call_timer_fn+0x17e/0x600 kernel/time/timer.c:1700 expire_timers kernel/time/timer.c:1751 [inline] __run_timers+0x621/0x830 kernel/time/timer.c:2038 run_timer_softirq+0x67/0xf0 kernel/time/timer.c:2051 __do_softirq+0x2bc/0x943 kernel/softirq.c:554 invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf2/0x1c0 kernel/softirq.c:633 irq_exit_rcu+0x9/0x30 kernel/softirq.c:645 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1076 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1076 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 RIP: 0010:resched_offsets_ok kernel/sched/core.c:10127 [inline] RIP: 0010:__might_resched+0x16f/0x780 kernel/sched/core.c:10142 Code: 00 4c 89 e8 48 c1 e8 03 48 ba 00 00 00 00 00 fc ff df 48 89 44 24 38 0f b6 04 10 84 c0 0f 85 87 04 00 00 41 8b 45 00 c1 e0 08 <01> d8 44 39 e0 0f 85 d6 00 00 00 44 89 64 24 1c 48 8d bc 24 a0 00 RSP: 0018:ffffc9000ee069e0 EFLAGS: 00000246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8880296a9e00 RDX: dffffc0000000000 RSI: ffff8880296a9e00 RDI: ffffffff8bfe8fa0 RBP: ffffc9000ee06b00 R08: ffffffff82326877 R09: 1ffff11002b5ad1b R10: dffffc0000000000 R11: ffffed1002b5ad1c R12: 0000000000000000 R13: ffff8880296aa23c R14: 000000000000062a R15: 1ffff92001dc0d44 down_write+0x19/0x50 kernel/locking/rwsem.c:1578 kernfs_activate fs/kernfs/dir.c:1403 [inline] kernfs_add_one+0x4af/0x8b0 fs/kernfs/dir.c:819 __kernfs_create_file+0x22e/0x2e0 fs/kernfs/file.c:1056 sysfs_add_file_mode_ns+0x24a/0x310 fs/sysfs/file.c:307 create_files fs/sysfs/group.c:64 [inline] internal_create_group+0x4f4/0xf20 fs/sysfs/group.c:152 internal_create_groups fs/sysfs/group.c:192 [inline] sysfs_create_groups+0x56/0x120 fs/sysfs/group.c:218 create_dir lib/kobject.c:78 [inline] kobject_add_internal+0x472/0x8d0 lib/kobject.c:240 kobject_add_varg lib/kobject.c:374 [inline] kobject_init_and_add+0x124/0x190 lib/kobject.c:457 netdev_queue_add_kobject net/core/net-sysfs.c:1706 [inline] netdev_queue_update_kobjects+0x1f3/0x480 net/core/net-sysfs.c:1758 register_queue_kobjects net/core/net-sysfs.c:1819 [inline] netdev_register_kobject+0x265/0x310 net/core/net-sysfs.c:2059 register_netdevice+0x1191/0x19c0 net/core/dev.c:10298 bond_newlink+0x3b/0x90 drivers/net/bonding/bond_netlink.c:576 rtnl_newlink_create net/core/rtnetlink.c:3506 [inline] __rtnl_newlink net/core/rtnetlink.c:3726 [inline] rtnl_newlink+0x158f/0x20a0 net/core/rtnetlink.c:3739 rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6606 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3c/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 __sys_sendto+0x3a4/0x4f0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2199 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 RIP: 0033:0x7fc3fa87fa9c Reported-by:syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
br_set_lockdep_class() is missing many details. Use generic netdev_lockdep_set_classes() to not worry anymore. Signed-off-by:
-
Eric Dumazet authored
vlan uses vlan_dev_set_lockdep_class() which lacks qdisc_tx_busylock initialization. Use generic netdev_lockdep_set_classes() to not worry anymore. Signed-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== net: use net->dev_by_index in two places Bring "ip link" ordering to /proc/net/dev one (by ifindexes). Do the same for /proc/net/vlan/config v2: https://lore.kernel.org/all/20240209142441.6c56435b@kernel.org/ ==================== Link: https://lore.kernel.org/r/20240211214404.1882191-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
Adopt net->dev_by_index as I did in commit 0e0939c0 ("net-procfs: use xarray iterator to implement /proc/net/dev") This makes sure an existing device is always visible in the dump, regardless of concurrent insertions/deletions. v2: added suggestions from Jakub Kicinski and Ido Schimmel, thanks for the help ! Link: https://lore.kernel.org/all/20240209142441.6c56435b@kernel.org/ Link: https://lore.kernel.org/all/ZckR-XOsULLI9EHc@shredder/Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20240211214404.1882191-3-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
Adopt net->dev_by_index as I did in commit 0e0939c0 ("net-procfs: use xarray iterator to implement /proc/net/dev") Not only this removes quadratic behavior, it also makes sure an existing vlan device is always visible in the dump, regardless of concurrent net->dev_base_head changes. Signed-off-by:
-
- 13 Feb, 2024 9 commits
-
-
Robert Marko authored
PMD Global Transmit Disable bit should be cleared for normal operation. This should be HW default, however I found that on Asus RT-AX89X that uses AQR113C PHY and firmware 5.4 this bit is set by default. With this bit set the AQR cannot achieve a link with its link-partner and it took me multiple hours of digging through the vendor GPL source to find this out, so lets always clear this bit during .config_init() to avoid a situation like this in the future. Signed-off-by:
Robert Marko <robimarko@gmail.com> Reviewed-by:
Paolo Abeni <pabeni@redhat.com>
-
Stephen Hemminger authored
The prologue to codel is using BSD-3 clause and GPL-2 boiler plate language. Replace it by using SPDX. The automated treewide scan in commit d2912cb1 ("treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500") did not pickup dual licensed code. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Acked-by:
Dave Taht <dave.taht@gmail.com> Link: https://lore.kernel.org/r/20240211172532.6568-1-stephen@networkplumber.orgSigned-off-by:
-
Heiner Kallweit authored
Use core-provided pcpu stats allocation instead of open-coding it in the driver. Signed-off-by:
-
Marc Kleine-Budde authored
Mails to naga.sureshkumar.relli@xilinx.com are bouncing due to a mail loop. Seems Naga Sureshkumar Relli has left the company. Remove Naga Sureshkumar Relli from the xilinx_can driver. Cc: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> Link: https://lore.kernel.org/all/20240213-xilinx_can-v1-1-79820de803ea@pengutronix.deSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Oliver Hartkopp authored
CAN XL data frames contain an 8-bit virtual CAN network identifier (VCID). A VCID value of zero represents an 'untagged' CAN XL frame. To receive and send these optional VCIDs via CAN_RAW sockets a new socket option CAN_RAW_XL_VCID_OPTS is introduced to define/access VCID content: - tx: set the outgoing VCID value by the kernel (one fixed 8-bit value) - tx: pass through VCID values from the user space (e.g. for traffic replay) - rx: apply VCID receive filter (value/mask) to be passed to the user space With the 'tx pass through' option CAN_RAW_XL_VCID_TX_PASS all valid VCID values can be sent, e.g. to replay full qualified CAN XL traffic. The VCID value provided for the CAN_RAW_XL_VCID_TX_SET option will override the VCID value in the struct canxl_frame.prio defined for CAN_RAW_XL_VCID_TX_PASS when both flags are set. With a rx_vcid_mask of zero all possible VCID values (0x00 - 0xFF) are passed to the user space when the CAN_RAW_XL_VCID_RX_FILTER flag is set. Without this flag only untagged CAN XL frames (VCID = 0x00) are delivered to the user space (default). The 8-bit VCID is stored inside the CAN XL prio element (only in CAN XL frames!) to not interfere with other CAN content or the CAN filters provided by the CAN_RAW sockets and kernel infrastruture. Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20240212213550.18516-1-socketcan@hartkopp.netSigned-off-by:
-
Harshit Mogalapalli authored
After this commit ba24ea12 ("net/sched: Retire ipt action") NET_ACT_IPT is not needed anymore as the action is retired and the code is removed. Clean the Kconfig part as well. Signed-off-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240209180656.867546-1-harshit.m.mogalapalli@oracle.comSigned-off-by:
-
Kurt Kanzenbach authored
Commit 8a7cb245 ("net: stmmac: Do not enable RX FIFO overflow interrupts") disabled the RX FIFO overflow interrupts. However, it left the status variable around, but never checks it. As stmmac_host_mtl_irq_status() returns only 0 now, the code can be simplified. Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20240208-stmmac_irq-v1-1-8bab236026d4@linutronix.deSigned-off-by:
-
Guillaume Nault authored
Set scope automatically in ip_route_output_ports() (using the socket SOCK_LOCALROUTE flag). This way, callers don't have to overload the tos with the RTO_ONLINK flag, like RT_CONN_FLAGS() does. For callers that don't pass a struct sock, this doesn't change anything as the scope is still set to RT_SCOPE_UNIVERSE when sk is NULL. Callers that passed a struct sock and used RT_CONN_FLAGS(sk) or RT_CONN_FLAGS_TOS(sk, tos) for the tos are modified to use ip_sock_tos(sk) and RT_TOS(tos) respectively, as overloading tos with the RTO_ONLINK flag now becomes unnecessary. In drivers/net/amt.c, all ip_route_output_ports() calls use a 0 tos parameter, ignoring the SOCK_LOCALROUTE flag of the socket. But the sk parameter is a kernel socket, which doesn't have any configuration path for setting SOCK_LOCALROUTE anyway. Therefore, ip_route_output_ports() will continue to initialise scope with RT_SCOPE_UNIVERSE and amt.c doesn't need to be modified. Also, remove RT_CONN_FLAGS() and RT_CONN_FLAGS_TOS() from route.h as these macros are now unused. The objective is to eventually remove RTO_ONLINK entirely to allow converting ->flowi4_tos to dscp_t. This will ensure proper isolation between the DSCP and ECN bits, thus minimising the risk of introducing bugs where TOS values interfere with ECN. Signed-off-by:
Guillaume Nault <gnault@redhat.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/dacfd2ab40685e20959ab7b53c427595ba229e7d.1707496938.git.gnault@redhat.comSigned-off-by:
-
Joe Damato authored
Make mlx5 compatible with the newly added netlink queue GET APIs. Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240209202312.30181-1-jdamato@fastly.comSigned-off-by:
-
- 12 Feb, 2024 5 commits
-
-
Wojciech Drewek authored
During devlink reload it is needed to remove debugfs entries correlated with only one PF. ice_debugfs_exit() removes all entries created by ice driver so we can't use it. Introduce ice_debugfs_pf_deinit() in order to release PF's debugfs entries. Move ice_debugfs_exit() call to ice_module_exit(), it makes more sense since ice_debugfs_init() is called in ice_module_init() and not in ice_probe(). Signed-off-by:
Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Wojciech Drewek authored
Recent changes to the devlink reload (commit 9b2348e2 ("devlink: warn about existing entities during reload-reinit")) force the drivers to destroy devlink ports during reinit. Adjust ice driver to this requirement, unregister netdvice, destroy devlink port. ice_init_eth() was removed and all the common code between probe and reload was moved to ice_load(). During devlink reload we can't take devl_lock (it's already taken) and in ice_probe() we have to lock it. Use devl_* variant of the API which does not acquire and release devl_lock. Guard ice_load() with devl_lock only in case of probe. Suggested-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by:
Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by:
-
Grzegorz Nitka authored
E825C devices shall support the new signing type of RSA 3K for new DDP section (SEGMENT_SIGN_TYPE_RSA3K_E825 (5) - already in the code). The driver is responsible to verify the presence of correct signing type. Add 3k signinig support for E825C devices based on mac_type: ICE_MAC_GENERIC_3K_E825; Signed-off-by:
Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by:
-
Grzegorz Nitka authored
E800 series devices have a couple of quirks: 1. Sideband control queues are not supported 2. The registers that the driver needs to program for the "Precision Time Protocol (PTP)" feature are different for E800 series devices compared to other devices supported by this driver. Both these require conditional logic based on the underlying device we are dealing with. The function ice_is_sbq_supported added by commit 8f5ee3c4 ("ice: add support for sideband messages") addresses (1). The same function can be used to address (2) as well but this just looks weird readability wise in cases that have nothing to do with sideband control queues: if (ice_is_sbq_supported(hw)) /* program register A */ else /* program register B */ For these cases, the function ice_is_generic_mac introduced by this patch communicates the idea/intention better. Also rework ice_is_sbq_supported to use this new function. As side-band queue is supported for E825C devices, it's mac_type is considered as generic mac_type. Co-developed-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by:
-
Grzegorz Nitka authored
Introduce new Intel Ethernet E825C family devices. Add new PCI device IDs which are going to be supported by the driver: - 579C: Intel(R) Ethernet Connection E825-C for backplane - 579D: Intel(R) Ethernet Connection E825-C for QSFP - 579E: Intel(R) Ethernet Connection E825-C for SFP - 579F: Intel(R) Ethernet Connection E825-C for SGMII Add helper function ice_is_e825c() to verify if the running device belongs to E825C family. Co-developed-by:
Jan Glaza <jan.glaza@intel.com> Signed-off-by:
Michal Michalik <michal.michalik@intel.com> Signed-off-by:
-
