Merge tag 'for-6.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM discard regressions due to DM core switching over to using
   queue_limits_set() without DM core and targets first being updated to
   set (and stack) discard limits in terms of max_hw_discard_sectors and
   not max_discard_sectors

 - Fix stable@ DM integrity discard support to set device's
   discard_granularity limit to the device's logical block size

* tag 'for-6.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: always manage discard support in terms of max_hw_discard_sectors
  dm-integrity: set discard_granularity to logical block size

Pull power management fixes from Rafael Wysocki:
 "These fix the amd-pstate driver and the operating performance point
  (OPP) handling related to generic PM domains.

  Specifics:

   - Fix a memory leak in the exit path of amd-pstate (Peng Ma)

   - Fix required_opp_tables handling in the cases when multiple generic
     PM domains share one OPP table (Viresh Kumar)"

* tag 'pm-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  OPP: Fix required_opp_tables for multiple genpds using same table
  cpufreq: amd-pstate: fix memory leak on CPU EPP exit

Pull ACPI fixes from Rafael Wysocki:
 "These make the ACPI EC driver always install the EC address space
  handler at the root of the ACPI namespace which causes it to take care
  of all EC operation regions everywhere.

  This means that the custom EC address space handler in the WMI driver
  is not needed any more and accordingly it gets removed altogether"

* tag 'acpi-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  platform/x86: wmi: Remove custom EC address space handler
  ACPI: EC: Install address space handler at the namespace root

Pull thermal control fixes from Rafael Wysocki:
 "These fix the MediaTek lvts_thermal driver and the handling of trip
  points that start as invalid and are adjusted later by user space via
  sysfs.

  Specifics:

   - Fix and clean up the MediaTek lvts_thermal driver (Julien Panis)

   - Prevent invalid trip point handling from triggering spurious trip
     point crossing events and allow passive polling to stop when a
     passive trip point involved in it becomes invalid (Rafael Wysocki)"

* tag 'thermal-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: Fix the handling of invalid trip points
  thermal/drivers/mediatek/lvts_thermal: Fix wrong lvts_ctrl index
  thermal/drivers/mediatek/lvts_thermal: Remove unused members from struct lvts_ctrl_data
  thermal/drivers/mediatek/lvts_thermal: Check NULL ptr on lvts_data

Merge tag 'intel-gpio-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel

Pull intel-gpio fixes from Andy Shevchenko:

 - NULL pointer dereference fix in GPIO APCI library

 - Restore ACPI handle matching for GPIO devices represented in banks

* tag 'intel-gpio-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel:
  gpiolib: acpi: Fix failed in acpi_gpiochip_find() by adding parent node match
  gpiolib: acpi: Move ACPI device NULL check to acpi_can_fallback_to_crs()

Pull soundwire updates from Vinod Koul:

 - cleanup and conversion for soundwire sysfs groups

 - intel support for ace2x bits, auxdevice pm improvements

 - qcom multi link device support

* tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (33 commits)
  soundwire: intel_ace2.x: add support for DOAISE property
  soundwire: intel_ace2.x: add support for DODSE property
  soundwire: intel_ace2x: use DOAIS and DODS settings from firmware
  soundwire: intel_ace2x: cleanup DOAIS/DODS settings
  soundwire: intel_ace2x: simplify check_wake()
  soundwire: intel_ace2x: fix wakeup handling
  soundwire: intel_init: resume all devices on exit.
  soundwire: intel: export intel_resume_child_device
  soundwire: intel_auxdevice: use pm_runtime_resume() instead of pm_request_resume()
  ASoC: SOF: Intel: hda: disable SoundWire interrupt later
  soundwire: qcom: allow multi-link on newer devices
  soundwire: intel_ace2x: use legacy formula for intel_alh_id
  soundwire: reconcile dp0_prop and dpn_prop
  soundwire: intel_ace2x: set the clock source
  soundwire: intel_ace2.x: power-up first before setting SYNCPRD
  soundwire: intel_ace2x: move and extend clock selection
  soundwire: intel: add support for MeteorLake additional clocks
  soundwire: intel: add more values for SYNCPRD
  soundwire: bus: extend base clock checks to 96 MHz
  soundwire: cadence: show the bus frequency and frame shape
  ...

Pull generic phy updates from Vinod Koul:
 "New HW Support:
   - Support for Embedded DisplayPort and DisplayPort submodes and
     driver support on Qualcomm X1E80100 edp driver
   - Qualcomm QMP UFS PHY for SM8475, QMP USB phy for QDU1000/QRU1000
     and eusb2-repeater for SMB2360
   - Samsung HDMI PHY for i.MX8MP, gs101 UFS phy
   - Mediatek XFI T-PHY support for mt7988
   - Rockchip usbdp combo phy driver

  Updates:
   - Qualcomm x4 lane EP support for sa8775p, v4 ad v6 support for
     X1E80100, SM8650 tables for UFS Gear 4 & 5 and correct voltage
     swing tables
   - Freescale imx8m-pci pcie link-up updates
   - Rockchip rx-common-refclk-mode support
   - More platform remove callback returning void conversions"

* tag 'phy-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (43 commits)
  dt-bindings: phy: qcom,usb-snps-femto-v2: use correct fallback for sc8180x
  dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: fix msm899[68] power-domains
  dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: fix x1e80100-gen3x2 schema
  phy: qcpm-qmp-usb: Add support for QDU1000/QRU1000
  dt-bindings: phy: qcom,qmp-usb: Add QDU1000 USB3 PHY
  dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QDU1000
  phy: qcom-qmp-pcie: add x4 lane EP support for sa8775p
  phy: samsung-ufs: ufs: exit on first reported error
  phy: samsung-ufs: ufs: remove superfluous mfd/syscon.h header
  phy: rockchip: fix CONFIG_TYPEC dependency
  phy: rockchip: usbdp: fix uninitialized variable
  phy: rockchip-snps-pcie3: add support for rockchip,rx-common-refclk-mode
  dt-bindings: phy: rockchip,pcie3-phy: add rockchip,rx-common-refclk-mode
  phy: rockchip: add usbdp combo phy driver
  dt-bindings: phy: add rockchip usbdp combo phy document
  phy: add driver for MediaTek XFI T-PHY
  dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings
  phy: freescale: fsl-samsung-hdmi: Convert to platform remove callback returning void
  phy: qcom: qmp-ufs: update SM8650 tables for Gear 4 & 5
  MAINTAINERS: Add phy-gs101-ufs file to Tensor GS101.
  ...

Pull dmaengine updates from Vinod Koul:
 "New HW support:
   - Freescale i.MX8ULP edma support in edma driver
   - StarFive JH8100 DMA support in Synopsis axi-dmac driver

  Updates:
   - Tracing support for freescale edma driver, updates to dpaa2 driver
   - Remove unused QCom hidma DT support
   - Support for i2c dma in imx-sdma
   - Maintainers update for idxd and edma drivers"

* tag 'dmaengine-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (42 commits)
  MAINTAINERS: Update role for IDXD driver
  dmaengine: fsl-edma: use _Generic to handle difference type
  dmaengine: fsl-edma: add trace event support
  dmaengine: idxd: Avoid unnecessary destruction of file_ida
  dmaengine: xilinx: xdma: fix module autoloading
  dt-bindings: dma: fsl-edma: allow 'power-domains' property
  dt-bindings: dma: fsl-edma: remove 'clocks' from required
  dmaengine: fsl-dpaa2-qdma: Fix kernel-doc check warning
  dmaengine: imx-sdma: Add i2c dma support
  dmaengine: imx-sdma: utilize compiler to calculate ADDRS_ARRAY_SIZE_V<n>
  dt-bindings: fsl-imx-sdma: Add I2C peripheral types ID
  dt-bindings: fsl-dma: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string
  dmaengine: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string
  dt-bindings: dma: Drop unused QCom hidma binding
  dmaengine: qcom: Drop hidma DT support
  dmaengine: pl08x: Use kcalloc() instead of kzalloc()
  dmaengine: fsl-dpaa2-qdma: Update DPDMAI interfaces to version 3
  dmaengine: fsl-edma: fix miss mutex unlock at an error return path
  dmaengine: pch_dma: remove unused function chan2parent
  dmaengine: fsl-dpaa2-qdma: Add dpdmai_cmd_open
  ...

Pull mailbox updates from Jassi Brar:

 - redo the omap driver from legacy to mailbox api

 - enable bufferless IPI for zynqmp

 - add mhu-v3 driver

 - convert from tasklet to BH workqueue

 - add qcom MSM8974 APCS compatible IDs

* tag 'mailbox-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (24 commits)
  dt-bindings: mailbox: qcom-ipcc: Document the SDX75 IPCC
  dt-bindings: mailbox: qcom: Add MSM8974 APCS compatible
  mailbox: Convert from tasklet to BH workqueue
  mailbox: mtk-cmdq: Fix pm_runtime_get_sync() warning in mbox shutdown
  mailbox: mtk-cmdq-mailbox: fix module autoloading
  mailbox: zynqmp: handle SGI for shared IPI
  mailbox: arm_mhuv3: Add driver
  dt-bindings: mailbox: arm,mhuv3: Add bindings
  mailbox: omap: Remove kernel FIFO message queuing
  mailbox: omap: Reverse FIFO busy check logic
  mailbox: omap: Remove mbox_chan_to_omap_mbox()
  mailbox: omap: Use mbox_controller channel list directly
  mailbox: omap: Use function local struct mbox_controller
  mailbox: omap: Merge mailbox child node setup loops
  mailbox: omap: Use devm_pm_runtime_enable() helper
  mailbox: omap: Remove device class
  mailbox: omap: Remove unneeded header omap-mailbox.h
  mailbox: omap: Move fifo size check to point of use
  mailbox: omap: Move omap_mbox_irq_t into driver
  mailbox: omap: Remove unused omap_mbox_request_channel() function
  ...

Pull remoteproc updates from Bjorn Andersson:
 "This makes the remoteproc core rproc_class const.

  DeviceTree bindings for a few different Qualcomm remoteprocs are
  updated to remove a range of validation warnings/errors. The Qualcomm
  SMD binding marks qcom,ipc deprecated, in favor or the mailbox
  interface.

  The TI K3 R5 remoteproc driver is updated to ensure that cores are
  powered up in the appropriate order. The driver also see a couple of
  fixes related to cleanups in error paths during probe.

  The Mediatek remoteproc driver is extended to support the MT8188 SCP
  core 1. Support for varying DRAM and IPI shared buffer sizes are
  introduced. This together with a couple of bug fixes and improvements
  to the driver.

  Support for the AMD-Xilinx Versal and Versal-NET platforms are added.
  Coredump support and support for parsing TCM information from
  DeviceTree is added to the Xilinx R5F remoteproc driver"

* tag 'rproc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits)
  dt-bindings: remoteproc: qcom,sdm845-adsp-pil: Fix qcom,halt-regs definition
  dt-bindings: remoteproc: qcom,sc7280-wpss-pil: Fix qcom,halt-regs definition
  dt-bindings: remoteproc: qcom,qcs404-cdsp-pil: Fix qcom,halt-regs definition
  dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996
  dt-bindings: remoteproc: qcom,smd-edge: Mark qcom,ipc as deprecated
  remoteproc: k3-r5: Jump to error handling labels in start/stop errors
  remoteproc: mediatek: Fix error code in scp_rproc_init()
  remoteproc: k3-r5: Do not allow core1 to power up before core0 via sysfs
  remoteproc: k3-r5: Wait for core0 power-up before powering up core1
  remoteproc: mediatek: Add IMGSYS IPI command
  remoteproc: mediatek: Support setting DRAM and IPI shared buffer sizes
  remoteproc: mediatek: Support MT8188 SCP core 1
  dt-bindings: remoteproc: mediatek: Support MT8188 dual-core SCP
  drivers: remoteproc: xlnx: Fix uninitialized tcm mode
  drivers: remoteproc: xlnx: Fix uninitialized variable use
  drivers: remoteproc: xlnx: Add Versal and Versal-NET support
  remoteproc: zynqmp: parse TCM from device tree
  dt-bindings: remoteproc: Add Tightly Coupled Memory (TCM) bindings
  remoteproc: zynqmp: fix lockstep mode memory region
  remoteproc: zynqmp: Add coredump support
  ...

Pull rpmsg updates from Bjorn Andersson:
 "This makes core rpmsg_class const and ensures that the automatic
  module loading of the Qualcomm glink_ssr driver happens"

* tag 'rpmsg-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: qcom_glink_ssr: fix module autoloading
  rpmsg: core: Make rpmsg_class constant

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
     since there's no requirement to describe them in E820 and some
     platforms require ECAM to work (Bjorn Helgaas)

   - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
     Le Moal)

   - Remove last user and pci_enable_device_io() (Heiner Kallweit)

   - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)

   - Skip waiting for devices that have been disconnected while
     suspended (Ilpo Järvinen)

   - Clear Secondary Status errors after enumeration since Master Aborts
     and Unsupported Request errors are an expected part of enumeration
     (Vidya Sagar)

  MSI:

   - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)

  Error handling:

   - Mask Genesys GL975x SD host controller Replay Timer Timeout
     correctable errors caused by a hardware defect; the errors cause
     interrupts that prevent system suspend (Kai-Heng Feng)

   - Fix EDR-related _DSM support, which previously evaluated revision 5
     but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)

  ASPM:

   - Simplify link state definitions and mask calculation (Ilpo
     Järvinen)

  Power management:

   - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
     apparently doesn't know how to put them back in D0 (Mario
     Limonciello)

  CXL:

   - Support resetting CXL devices; special handling required because
     CXL Ports mask Secondary Bus Reset by default (Dave Jiang)

  DOE:

   - Support DOE Discovery Version 2 (Alexey Kardashevskiy)

  Endpoint framework:

   - Set endpoint BAR to be 64-bit if the driver says that's all the
     device supports, in addition to doing so if the size is >2GB
     (Niklas Cassel)

   - Simplify endpoint BAR allocation and setting interfaces (Niklas
     Cassel)

  Cadence PCIe controller driver:

   - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
     Kozlowski)

  Cadence PCIe endpoint driver:

   - Configure endpoint BARs to be 64-bit based on the BAR type, not the
     BAR value (Niklas Cassel)

  Freescale Layerscape PCIe controller driver:

   - Convert DT binding to YAML (Frank Li)

  MediaTek MT7621 PCIe controller driver:

   - Add DT binding missing 'reg' property for child Root Ports
     (Krzysztof Kozlowski)

   - Fix theoretical string truncation in PHY name (Sergio Paracuellos)

  NVIDIA Tegra194 PCIe controller driver:

   - Return success for endpoint probe instead of falling through to the
     failure path (Vidya Sagar)

  Renesas R-Car PCIe controller driver:

   - Add DT binding missing IOMMU properties (Geert Uytterhoeven)

   - Add DT binding R-Car V4H compatible for host and endpoint mode
     (Yoshihiro Shimoda)

  Rockchip PCIe controller driver:

   - Configure endpoint BARs to be 64-bit based on the BAR type, not the
     BAR value (Niklas Cassel)

   - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)

   - Set the Subsystem Vendor ID, which was previously zero because it
     was masked incorrectly (Rick Wertenbroek)

  Synopsys DesignWare PCIe controller driver:

   - Restructure DBI register access to accommodate devices where this
     requires Refclk to be active (Manivannan Sadhasivam)

   - Remove the deinit() callback, which was only need by the
     pcie-rcar-gen4, and do it directly in that driver (Manivannan
     Sadhasivam)

   - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
     up things like eDMA (Manivannan Sadhasivam)

   - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
     to dw_pcie_ep_init() (Manivannan Sadhasivam)

   - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
     reflect the actual functionality (Manivannan Sadhasivam)

   - Call dw_pcie_ep_init_registers() directly from all the glue
     drivers, not just those that require active Refclk from the host
     (Manivannan Sadhasivam)

   - Remove the "core_init_notifier" flag, which was an obscure way for
     glue drivers to indicate that they depend on Refclk from the host
     (Manivannan Sadhasivam)

  TI J721E PCIe driver:

   - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)

   - Add DT binding J722S SoC support (Siddharth Vadapalli)

  TI Keystone PCIe controller driver:

   - Add DT binding missing num-viewport, phys and phy-name properties
     (Jan Kiszka)

  Miscellaneous:

   - Constify and annotate with __ro_after_init (Heiner Kallweit)

   - Convert DT bindings to YAML (Krzysztof Kozlowski)

   - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
     Zhou)"

* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
  PCI: Do not wait for disconnected devices when resuming
  x86/pci: Skip early E820 check for ECAM region
  PCI: Remove unused pci_enable_device_io()
  ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
  PCI: Update pci_find_capability() stub return types
  PCI: Remove PCI_IRQ_LEGACY
  scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
  scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
  Revert "genirq/msi: Provide constants for PCI/IMS support"
  Revert "x86/apic/msi: Enable PCI/IMS"
  Revert "iommu/vt-d: Enable PCI/IMS"
  Revert "iommu/amd: Enable PCI/IMS"
  Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
  ...

Merge tag 'keys-trusted-next-6.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull trusted keys fixes from Jarkko Sakkinen:
 "These are two bugs I found from trusted keys while working on a new
  RSA key type for TPM2. Both originate form v5.13.

  The memory leak is more crucial but I don't think it is either good
  idea if kernel throws WARN when ASN.1 parser fails, even if it is
  related to programming error, as it is not that mature code yet.

  There's at least two WARN's in that code but I picked just the one
  more likely to trigger. Planning to fix the other one too over time"

* tag 'keys-trusted-next-6.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  KEYS: trusted: Do not use WARN when encode fails
  KEYS: trusted: Fix memory leak in tpm2_key_encode()

Pull bdev bd_inode updates from Al Viro:
 "Replacement of bdev->bd_inode with sane(r) set of primitives by me and
  Yu Kuai"

* tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  RIP ->bd_inode
  dasd_format(): killing the last remaining user of ->bd_inode
  nilfs_attach_log_writer(): use ->bd_mapping->host instead of ->bd_inode
  block/bdev.c: use the knowledge of inode/bdev coallocation
  gfs2: more obvious initializations of mapping->host
  fs/buffer.c: massage the remaining users of ->bd_inode to ->bd_mapping
  blk_ioctl_{discard,zeroout}(): we only want ->bd_inode->i_mapping here...
  grow_dev_folio(): we only want ->bd_inode->i_mapping there
  use ->bd_mapping instead of ->bd_inode->i_mapping
  block_device: add a pointer to struct address_space (page cache of bdev)
  missing helpers: bdev_unhash(), bdev_drop()
  block: move two helpers into bdev.c
  block2mtd: prevent direct access of bd_inode
  dm-vdo: use bdev_nr_bytes(bdev) instead of i_size_read(bdev->bd_inode)
  blkdev_write_iter(): saner way to get inode and bdev
  bcachefs: remove dead function bdev_sectors()
  ext4: remove block_device_ejected()
  erofs_buf: store address_space instead of inode
  erofs: switch erofs_bread() to passing offset instead of block number

Previous patch modified the standard used by acpi_gpiochip_find()
to match device nodes. Using the device node set in gc->gpiodev->d-
ev instead of gc->parent.

However, there is a situation in gpio-dwapb where the GPIO device
driver will set gc->fwnode for each port corresponding to a child
node under a GPIO device, so gc->gpiodev->dev will be assigned the
value of each child node in gpiochip_add_data().

gpio-dwapb.c:
128,31 static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
			       struct dwapb_port_property *pp,
			       unsigned int offs);
port->gc.fwnode = pp->fwnode;

693,39 static int dwapb_gpio_probe;
err = dwapb_gpio_add_port(gpio, &pdata->properties[i], i);

When other drivers request GPIO pin resources through the GPIO device
node provided by ACPI (corresponding to the parent node), the change
of the matching object to gc->gpiodev->dev in acpi_gpiochip_find()
only allows finding the value of each port (child node), resulting
in a failed request.

Reapply the condition of using gc->parent for match in acpi_gpio-
chip_find() in the code can compatible with the problem of gpio-dwapb,
and will not affect the two cases mentioned in the patch:
1. There is no setting for gc->fwnode.
2. The case that depends on using gc->fwnode for match.

Fixes: 5062e4c1 ("gpiolib: acpi: use the fwnode in acpi_gpiochip_find()")
Fixes: 067dbc1e ("gpiolib: acpi: Don't use GPIO chip fwnode in acpi_gpiochip_find()")
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull vfs blocksize updates from Al Viro:
 "This gets rid of bogus set_blocksize() uses, switches it over
  to be based on a 'struct file *' and verifies that the caller
  has the device opened exclusively"

* tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  make set_blocksize() fail unless block device is opened exclusive
  set_blocksize(): switch to passing struct file *
  btrfs_get_bdev_and_sb(): call set_blocksize() only for exclusive opens
  swsusp: don't bother with setting block size
  zram: don't bother with reopening - just use O_EXCL for open
  swapon(2): open swap with O_EXCL
  swapon(2)/swapoff(2): don't bother with block size
  pktcdvd: sort set_blocksize() calls out
  bcache_register(): don't bother with set_blocksize()

Following the relocation of the function call outside of
__acpi_find_gpio(), move the ACPI device NULL check to
acpi_can_fallback_to_crs().
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://lore.kernel.org/all/20240426154208.81894-1-laura.nao@collabora.com/
Fixes: 49c02f6e ("gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

pidfs started using much saner inodes in commit b28ddcc3 ("pidfs:
convert to path_from_stashed() helper"), but that exposed the fact that
lsof had some knowledge of just how odd our old anon_inode usage was.

For example, legacy anon_inodes hadn't even initialized the inode type
in the inode mode, so everything had a type of zero.

So sane tools like 'stat' would report these files as "weird file", but
'lsof' instead used that (together with the name of the link in proc) to
notice that it's an anonymous inode, and used it to detect pidfd files.

Let's keep our internal new sane inode model, but mask the file type
bits at 'stat()' time in the getattr() function we already have, and by
making the dentry name match what lsof expects too.

This keeps our internal models sane, but should make user space see the
same old odd behavior.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/a15b1050-4b52-4740-a122-a4d055c17f11@kernel.org/
Link: https://github.com/lsof-org/lsof/issues/317
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Seth Forshee <sforshee@kernel.org>
Cc: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge an amd-pstate driver fix for 6.10-rc1:

 - Fix a memory leak in the exit path of amd-pstate (Peng Ma).

* pm-cpufreq:
  cpufreq: amd-pstate: fix memory leak on CPU EPP exit

When asn1_encode_sequence() fails, WARN is not the correct solution.

1. asn1_encode_sequence() is not an internal function (located
   in lib/asn1_encode.c).
2. Location is known, which makes the stack trace useless.
3. Results a crash if panic_on_warn is set.

It is also noteworthy that the use of WARN is undocumented, and it
should be avoided unless there is a carefully considered rationale to
use it.

Replace WARN with pr_err, and print the return value instead, which is
only useful piece of information.

Cc: stable@vger.kernel.org # v5.13+
Fixes: f2219745 ("security: keys: trusted: use ASN.1 TPM2 key format for the blobs")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

'scratch' is never freed. Fix this by calling kfree() in the success, and
in the error case.

Cc: stable@vger.kernel.org # +v5.13
Fixes: f2219745 ("security: keys: trusted: use ASN.1 TPM2 key format for the blobs")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Pull coccinelle updates from Julia Lawall:
 "One patch slightly improves the text in a comment.

  The other patch (on minmax.cocci) removes a report about ? being used
  in return statements that has been generating not very useful
  suggestions to change idiomatic code"

* tag 'cocci-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  Coccinelle: pm_runtime: Fix grammar in comment
  coccinelle: misc: minmax: Suppress reports for err returns

Pull asm-generic cleanups from Arnd Bergmann:
 "These are a few cross-architecture cleanup patches:

   - separate out fbdev support from the asm/video.h contents that may
     be used by either the old fbdev drivers or the newer drm display
     code (Thomas Zimmermann)

   - cleanups for the generic bitops code and asm-generic/bug.h
     (Thorsten Blum)

   - remove the orphaned include/asm-generic/page.h header that used to
     be included by long-removed mmu-less architectures (me)"

* tag 'asm-generic-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: Fix name collision with ACPI's video.o
  bug: Improve comment
  asm-generic: remove unused asm-generic/page.h
  arch: Rename fbdev header and source files
  arch: Remove struct fb_info from video helpers
  arch: Select fbdev helpers with CONFIG_VIDEO
  bitops: Change function return types from long to int

Pull more SoC devicetree updates from Arnd Bergmann:
 "This is a follow-up to an earlier pull request for device tree
  changes, as three platform maintainers sent their contents too late to
  be included in the main set, but had not caused any further problems
  since then:

   - The Amlogic platform now containts support for two new SoC types,
     the A4 and A5 chips for audio applications. Both come with a
     reference board, and one more dts file gets addded for the
     combination of the MNT Reform Laptop with the BPI-CM4 CPU module

   - The ASpeed platform adds support for six addititional server
     platforms that use ast2500 or ast2600 as their BMC, while another
     one gets removed

   - The RISC-V platforms from Microchip, Starfive and and T-HEAD get
     additional features for existing hardware, plus the addition of the
     Milk-V Mars based on the StarFive VisionFive v2 board"

* tag 'soc-dt-late-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (76 commits)
  riscv: dts: microchip: add pac1934 power-monitor to icicle
  riscv: dts: thead: Fix node ordering in TH1520 device tree
  ARM: dts: aspeed: Add ASRock E3C256D4I BMC
  dt-bindings: arm: aspeed: document ASRock E3C256D4I
  dt-bindings: trivial-devices: add isil,isl69269
  ARM: dts: aspeed: x4tf: Add dts for asus x4tf project
  dt-bindings: arm: aspeed: add ASUS X4TF board
  ARM: dts: aspeed: Remove Facebook Cloudripper dts
  ARM: dts: aspeed: drop unused ref_voltage ADC property
  ARM: dts: aspeed: harma: correct Mellanox multi-host property
  ARM: dts: aspeed: yosemitev2: correct Mellanox multi-host property
  ARM: dts: aspeed: yosemite4: correct Mellanox multi-host property
  ARM: dts: aspeed: greatlakes: correct Mellanox multi-host property
  ARM: dts: aspeed: Modify I2C bus configuration
  ARM: dts: aspeed: Disable unused ADC channels for Asrock X570D4U BMC
  ARM: dts: aspeed: Modify GPIO table for Asrock X570D4U BMC
  ARM: dts: aspeed: yosemite4: set bus13 frequency to 100k
  ARM: dts: Aspeed: Bonnell: Fix NVMe LED labels
  ARM: dts: aspeed: yosemite4: Enable ipmb device for OCP debug card
  ARM: dts: aspeed: ahe50dc: Update lm25066 regulator name
  ...

Pull vfio updates from Alex Williamson:

 - The vfio fsl-mc bus driver has become orphaned. We'll consider
   removing it in future releases if a new maintainer isn't found (Alex
   Williamson)

 - Improved usage of opaque data in vfio-pci INTx handling, avoiding
   lookups of the eventfd through the interrupt and irqfd runtime paths
   (Alex Williamson)

 - Resolve an error path memory leak introduced in vfio-pci interrupt
   code (Ye Bin)

 - Addition of interrupt support for vfio devices exposed on the CDX
   bus, including a new MSI allocation helper and export of existing
   helpers for MSI alloc and free (Nipun Gupta)

 - A new vfio-pci variant driver supporting migration of Intel QAT VF
   devices for the GEN4 PFs (Xin Zeng & Yahui Cao)

 - Resolve a possibly circular locking dependency in vfio-pci by
   avoiding copy_to_user() from a PCI bus walk callback (Alex
   Williamson)

 - Trivial docs update to remove a duplicate semicolon (Foryun Ma)

* tag 'vfio-v6.10-rc1' of https://github.com/awilliam/linux-vfio:
  vfio/pci: Restore zero affected bus reset devices warning
  vfio: remove an extra semicolon
  vfio/pci: Collect hot-reset devices to local buffer
  vfio/qat: Add vfio_pci driver for Intel QAT SR-IOV VF devices
  vfio/cdx: add interrupt support
  genirq/msi: Add MSI allocation helper and export MSI functions
  vfio/pci: fix potential memory leak in vfio_intx_enable()
  vfio/pci: Pass eventfd context object through irqfd
  vfio/pci: Pass eventfd context to IRQ handler
  MAINTAINERS: Orphan vfio fsl-mc bus driver

Merge tag 'linux_kselftest-next-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "Revert framework change to add D_GNU_SOURCE to KHDR_INCLUDES to
  Makefile, lib.mk, and kselftest_harness.h and follow-on changes to
  cgroup and sgx test as they are causing build failures and warnings"

* tag 'linux_kselftest-next-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  Revert "selftests/cgroup: Drop define _GNU_SOURCE"
  Revert "selftests/sgx: Include KHDR_INCLUDES in Makefile"
  Revert "selftests: Compile kselftest headers with -D_GNU_SOURCE"

Commit 2fd001cd ("arch: Rename fbdev header and source files")
renames the video source files under arch/ such that they do not
refer to fbdev any longer. The new files named video.o conflict with
ACPI's video.ko module. Modprobing the ACPI module can then fail with
warnings about missing symbols, as shown below.

  (i915_selftest:1107) igt_kmod-WARNING: i915: Unknown symbol acpi_video_unregister (err -2)
  (i915_selftest:1107) igt_kmod-WARNING: i915: Unknown symbol acpi_video_register_backlight (err -2)
  (i915_selftest:1107) igt_kmod-WARNING: i915: Unknown symbol __acpi_video_get_backlight_type (err -2)
  (i915_selftest:1107) igt_kmod-WARNING: i915: Unknown symbol acpi_video_register (err -2)

Fix the issue by renaming the architecture's video.o to video-common.o.
Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/intel-gfx/9dcac6e9-a3bf-4ace-bbdc-f697f767f9e0@suse.de/T/#tSigned-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 2fd001cd ("arch: Rename fbdev header and source files")
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've tried to address some performance issues on zoned
  storage such as direct IO and write_hints. In addition, we've migrated
  some IO paths using folio. Meanwhile, there are multiple bug fixes in
  the compression paths, sanity check conditions, and error handlers.

  Enhancements:
   - allow direct io of pinned files for zoned storage
   - assign the write hint per stream by default
   - convert read paths and test_writeback to folio
   - avoid allocating WARM_DATA segment for direct IO

  Bug fixes:
   - fix false alarm on invalid block address
   - fix to add missing iput() in gc_data_segment()
   - fix to release node block count in error path of
     f2fs_new_node_page()
   - compress:
       - don't allow unaligned truncation on released compress inode
       - cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
       - fix error path of inc_valid_block_count()
       - fix to update i_compr_blocks correctly
   - fix block migration when section is not aligned to pow2
   - don't trigger OPU on pinfile for direct IO
   - fix to do sanity check on i_xattr_nid in sanity_check_inode()
   - write missing last sum blk of file pinning section
   - clear writeback when compression failed
   - fix to adjust appropirate defragment pg_end

  As usual, there are several minor code clean-ups, and fixes to manage
  missing corner cases in the error paths"

* tag 'f2fs-for-6.10.rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (50 commits)
  f2fs: initialize last_block_in_bio variable
  f2fs: Add inline to f2fs_build_fault_attr() stub
  f2fs: fix some ambiguous comments
  f2fs: fix to add missing iput() in gc_data_segment()
  f2fs: allow dirty sections with zero valid block for checkpoint disabled
  f2fs: compress: don't allow unaligned truncation on released compress inode
  f2fs: fix to release node block count in error path of f2fs_new_node_page()
  f2fs: compress: fix to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
  f2fs: compress: fix error path of inc_valid_block_count()
  f2fs: compress: fix typo in f2fs_reserve_compress_blocks()
  f2fs: compress: fix to update i_compr_blocks correctly
  f2fs: check validation of fault attrs in f2fs_build_fault_attr()
  f2fs: fix to limit gc_pin_file_threshold
  f2fs: remove unused GC_FAILURE_PIN
  f2fs: use f2fs_{err,info}_ratelimited() for cleanup
  f2fs: fix block migration when section is not aligned to pow2
  f2fs: zone: fix to don't trigger OPU on pinfile for direct IO
  f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode()
  f2fs: fix to avoid allocating WARM_DATA segment for direct IO
  f2fs: remove redundant parameter in is_next_segment_free()
  ...

Pull xfs updates from Chandan Babu:
 "Online repair feature continues to be expanded. Also, we now support
  delayed allocation for realtime devices which have an extent size that
  is equal to filesystem's block size.

  New code:

   - Introduce Parent Pointer extended attribute for inodes

   - Bring back delalloc support for realtime devices which have an
     extent size that is equal to filesystem's block size

   - Improve performance of log incompat feature handling

  Online Repair:

   - Implement atomic file content exchanges i.e. exchange ranges of
     bytes between two files atomically

   - Create temporary files to repair file-based metadata. This uses
     atomic file content exchange facility to swap file fork mappings
     between the temporary file and the metadata inode

   - Allow callers of directory/xattr code to set an explicit owner
     number to be written into the header fields of any new blocks that
     are created. This is required to avoid walking every block of the
     new structure and modify their ownership during online repair

   - Repair more data structures:
       - Extended attributes
       - Inode unlinked state
       - Directories
       - Symbolic links
       - AGI's unlinked inode list
       - Parent pointers

   - Move Orphan files to lost and found directory

   - Fixes for Inode repair functionality

   - Introduce a new sub-AG FITRIM implementation to reduce the duration
     for which the AGF lock is held

   - Updates for the design documentation

   - Use Parent Pointers to assist in checking directories, parent
     pointers, extended attributes, and link counts

  Fixes:

   - Prevent userspace from reading invalid file data due to incorrect.
     updation of file size when performing a non-atomic clone operation

   - Minor fixes to online repair

   - Fix confusing return values from xfs_bmapi_write()

   - Fix an out of bounds access due to incorrect h_size during log
     recovery

   - Defer upgrading the extent counters in xfs_reflink_end_cow_extent()
     until we know we are going to modify the extent mapping

   - Remove racy access to if_bytes check in
     xfs_reflink_end_cow_extent()

   - Fix sparse warnings

  Cleanups:

   - Hold inode locks on all files involved in a rename until the
     completion of the operation. This is in preparation for the parent
     pointers patchset where parent pointers are applied in a separate
     chained update from the actual directory update

   - Compile out v4 support when disabled

   - Cleanup xfs_extent_busy_clear()

   - Remove unused flags and fields from struct xfs_da_args

   - Remove definitions of unused functions

   - Improve extended attribute validation

   - Add higher level directory operations helpers to remove duplication
     of code

   - Cleanup quota (un)reservation interfaces"

* tag 'xfs-6.10-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (221 commits)
  xfs: simplify iext overflow checking and upgrade
  xfs: remove a racy if_bytes check in xfs_reflink_end_cow_extent
  xfs: upgrade the extent counters in xfs_reflink_end_cow_extent later
  xfs: xfs_quota_unreserve_blkres can't fail
  xfs: consolidate the xfs_quota_reserve_blkres definitions
  xfs: clean up buffer allocation in xlog_do_recovery_pass
  xfs: fix log recovery buffer allocation for the legacy h_size fixup
  xfs: widen flags argument to the xfs_iflags_* helpers
  xfs: minor cleanups of xfs_attr3_rmt_blocks
  xfs: create a helper to compute the blockcount of a max sized remote value
  xfs: turn XFS_ATTR3_RMT_BUF_SPACE into a function
  xfs: use unsigned ints for non-negative quantities in xfs_attr_remote.c
  xfs: do not allocate the entire delalloc extent in xfs_bmapi_write
  xfs: fix xfs_bmap_add_extent_delay_real for partial conversions
  xfs: remove the xfs_iext_peek_prev_extent call in xfs_bmapi_allocate
  xfs: pass the actual offset and len to allocate to xfs_bmapi_allocate
  xfs: don't open code XFS_FILBLKS_MIN in xfs_bmapi_write
  xfs: lift a xfs_valid_startblock into xfs_bmapi_allocate
  xfs: remove the unusued tmp_logflags variable in xfs_bmapi_allocate
  xfs: fix error returns from xfs_bmapi_write
  ...

Commit 4f563a64 ("block: add a max_user_discard_sectors queue
limit") changed block core to set max_discard_sectors to:
 min(lim->max_hw_discard_sectors, lim->max_user_discard_sectors)

Since commit 1c0e7202 ("dm: use queue_limits_set") it was reported
dm-thinp was failing in a few fstests (generic/347 and generic/405)
with the first WARN_ON_ONCE in dm_cell_key_has_valid_range() being
reported, e.g.:
WARNING: CPU: 1 PID: 30 at drivers/md/dm-bio-prison-v1.c:128 dm_cell_key_has_valid_range+0x3d/0x50

blk_set_stacking_limits() sets max_user_discard_sectors to UINT_MAX,
so given how block core now sets max_discard_sectors (detailed above)
it follows that blk_stack_limits() stacks up the underlying device's
max_hw_discard_sectors and max_discard_sectors is set to match it. If
max_hw_discard_sectors exceeds dm's BIO_PRISON_MAX_RANGE, then
dm_cell_key_has_valid_range() will trigger the warning with:
WARN_ON_ONCE(key->block_end - key->block_begin > BIO_PRISON_MAX_RANGE)

Aside from this warning, the discard will fail.  Fix this and other DM
issues by governing discard support in terms of max_hw_discard_sectors
instead of max_discard_sectors.
Reported-by: Theodore Ts'o <tytso@mit.edu>
Fixes: 1c0e7202 ("dm: use queue_limits_set")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

Pull isofs, udf, quota, ext2, and reiserfs updates from Jan Kara:

 - convert isofs to the new mount API

 - cleanup isofs Makefile

 - udf conversion to folios

 - some other small udf cleanups and fixes

 - ext2 cleanups

 - removal of reiserfs .writepage method

 - update reiserfs README file

* tag 'fs_for_v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  isofs: Use *-y instead of *-objs in Makefile
  ext2: Remove LEGACY_DIRECT_IO dependency
  isofs: Remove calls to set/clear the error flag
  ext2: Remove call to folio_set_error()
  udf: Use a folio in udf_write_end()
  udf: Convert udf_page_mkwrite() to use a folio
  udf: Convert udf_symlink_getattr() to use a folio
  udf: Convert udf_adinicb_readpage() to udf_adinicb_read_folio()
  udf: Convert udf_expand_file_adinicb() to use a folio
  udf: Convert udf_write_begin() to use a folio
  udf: Convert udf_symlink_filler() to use a folio
  reiserfs: Trim some README bits
  quota: fix to propagate error of mark_dquot_dirty() to caller
  reiserfs: Convert to writepages
  udf: udftime: prevent overflow in udf_disk_stamp_to_time()
  ext2: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
  udf: replace deprecated strncpy/strcpy with strscpy
  udf: Remove second semicolon
  isofs: convert isofs to use the new mount API
  fs: quota: use group allocation of per-cpu counters API

dm-integrity could set discard_granularity lower than the logical block
size. This could result in failures when sending discard requests to
dm-integrity.

This fix is needed for kernels prior to 6.10.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Eric Wheeler <linux-integrity@lists.ewheeler.net>
Cc: stable@vger.kernel.org # <= 6.9
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

This reverts commit e6595224.

These kinds of patches are only making the code worse.

Compilers don't care about the unnecessary check, but removing it makes
the code less obvious to a human.  The declaration of 'len' is more than
80 lines earlier, so a human won't easily see that 'len' is of an
unsigned type, so to a human the range check that checks against zero is
much more explicit and obvious.

Any tool that complains about a range check like this just because the
variable is unsigned is actively detrimental, and should be ignored.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull fsnotify updates from Jan Kara:

 - reduce overhead of fsnotify infrastructure when no permission events
   are in use

 - a few small cleanups

* tag 'fsnotify_for_v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: fix UAF from FS_ERROR event on a shutting down filesystem
  fsnotify: optimize the case of no permission event watchers
  fsnotify: use an enum for group priority constants
  fsnotify: move s_fsnotify_connectors into fsnotify_sb_info
  fsnotify: lazy attach fsnotify_sb_info state to sb
  fsnotify: create helper fsnotify_update_sb_watchers()
  fsnotify: pass object pointer and type to fsnotify mark helpers
  fanotify: merge two checks regarding add of ignore mark
  fsnotify: create a wrapper fsnotify_find_inode_mark()
  fsnotify: create helpers to get sb and connp from object
  fsnotify: rename fsnotify_{get,put}_sb_connectors()
  fsnotify: Avoid -Wflex-array-member-not-at-end warning
  fanotify: remove unneeded sub-zero check for unsigned value

s/does not use unnecessary/do not unnecessarily use/
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

Most of the people prefer:

return ret < 0 ? ret: 0;

than:

return min(ret, 0);

Let's tweak the cocci file to ignore those lines completely.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

Pull dma-mapping updates from Christoph Hellwig:

 - optimize DMA sync calls when they are no-ops (Alexander Lobakin)

 - fix swiotlb padding for untrusted devices (Michael Kelley)

 - add documentation for swiotb (Michael Kelley)

* tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping:
  dma: fix DMA sync for drivers not calling dma_set_mask*()
  xsk: use generic DMA sync shortcut instead of a custom one
  page_pool: check for DMA sync shortcut earlier
  page_pool: don't use driver-set flags field directly
  page_pool: make sure frag API fields don't span between cachelines
  iommu/dma: avoid expensive indirect calls for sync operations
  dma: avoid redundant calls for sync operations
  dma: compile-out DMA sync op calls when not used
  iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices
  swiotlb: remove alloc_size argument to swiotlb_tbl_map_single()
  Documentation/core-api: add swiotlb documentation

Pull MIPS updates from Thomas Bogendoerfer:
 "Just cleanups and fixes"

* tag 'mips_6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (24 commits)
  MIPS: Take in account load hazards for HI/LO restoring
  MIPS: SGI-IP27: use WARN_ON() output
  MIPS: SGI-IP27: fix -Wunused-variable in arch_init_irq()
  MIPS: SGI-IP27: micro-optimize arch_init_irq()
  mips: dts: ralink: mt7621: reorder the attributes of the root node
  mips: dts: ralink: mt7621: reorder pci?_phy attributes
  mips: dts: ralink: mt7621: reorder pcie node attributes and children
  mips: dts: ralink: mt7621: reorder ethernet node attributes and kids
  mips: dts: ralink: mt7621: reorder gic node attributes
  mips: dts: ralink: mt7621: reorder mmc node attributes
  mips: dts: ralink: mt7621: move pinctrl and sort its children
  mips: dts: ralink: mt7621: reorder spi0 node attributes
  mips: dts: ralink: mt7621: reorder i2c node attributes
  mips: dts: ralink: mt7621: reorder gpio node attributes
  mips: dts: ralink: mt7621: reorder sysc node attributes
  mips: dts: ralink: mt7621: reorder mmc regulator attributes
  mips: dts: ralink: mt7621: reorder cpuintc node attributes
  mips: dts: ralink: mt7621: reorder cpu node attributes
  MIPS: Add prototypes for plat_post_relocation() and relocate_kernel()
  MIPS: Octeon: Add PCIe link status check
  ...

Pull dmi updates from Jean Delvare:
 "Bug fixes:

   - KCFI violation in dmi-id

   - stop decoding on broken (short) DMI table entry

  New features:

   - print info about populated memory slots at boot"

* tag 'dmi-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  firmware: dmi: Add info message for number of populated and total memory slots
  firmware: dmi: Stop decoding on broken entry
  firmware: dmi-id: add a release callback function

Pull watchdog updates from Wim Van Sebroeck:

 - Add Lenovo SE10 platform Watchdog Driver

 - Other small fixes and improvements

* tag 'linux-watchdog-6.10-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: LENOVO_SE10_WDT should depend on X86 && DMI
  watchdog: sa1100: Fix PTR_ERR_OR_ZERO() vs NULL check in sa1100dog_probe()
  watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate a safety margin
  watchdog: add HAS_IOPORT dependencies
  watchdog/wdt-main: Use cpumask_of() to avoid cpumask var on stack
  watchdog: bd9576: Drop "always-running" property
  watchdog: mtx-1: drop driver owner assignment
  watchdog: cpu5wdt.c: Fix use-after-free bug caused by cpu5wdt_trigger
  watchdog: lenovo_se10_wdt: Watchdog driver for Lenovo SE10 platform