bpf_sk_storage maps use multiple spin locks to reduce contention.
The number of locks to use is determined by the number of possible CPUs.
With only 1 possible CPU, bucket_log == 0, and 2^0 = 1 locks are used.

When updating elements, the correct lock is determined with hash_ptr().
Calling hash_ptr() with 0 bits is undefined behavior, as it does:

x >> (64 - bits)

Using the value results in an out of bounds memory access.
In my case, this manifested itself as a page fault when raw_spin_lock_bh()
is called later, when running the self tests:

./tools/testing/selftests/bpf/test_verifier 773 775
[   16.366342] BUG: unable to handle page fault for address: ffff8fe7a66f93f8

Force the minimum number of locks to two.
Signed-off-by: Arthur Fabre <afabre@cloudflare.com>
Fixes: 6ac99e8f ("bpf: Introduce bpf sk local storage")
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Since commit 177366bf the %rbp stopped pointing to %rbp of the
previous stack frame. That broke frame pointer based stack unwinding.
This commit is a partial revert of it.
Note that the location of tail_call_cnt is fixed, since the verifier
enforces MAX_BPF_STACK stack size for programs with tail calls.

Fixes: 177366bf ("bpf: change x86 JITed program stack layout")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

.ndo_xdp_xmit() assumes it is called under RCU. For example virtio_net
uses RCU to detect it has setup the resources for tx. The assumption
accidentally broke when introducing bulk queue in devmap.

Fixes: 5d053f9d ("bpf: devmap prepare xdp frames for bulking")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

dev_map_free() forgot to free bulk queue when freeing its entries.

Fixes: 5d053f9d ("bpf: devmap prepare xdp frames for bulking")
Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

dev_map_free() waits for flush_needed bitmap to be empty in order to
ensure all flush operations have completed before freeing its entries.
However the corresponding clear_bit() was called before using the
entries, so the entries could be used after free.

All access to the entries needs to be done before clearing the bit.
It seems commit a5e2da6e ("bpf: netdev is never null in
__dev_map_flush") accidentally changed the clear_bit() and memory access
order.

Note that the problem happens only in __dev_map_flush(), not in
dev_map_flush_old(). dev_map_flush_old() is called only after nulling
out the corresponding netdev_map entry, so dev_map_free() never frees
the entry thus no such race happens there.

Fixes: a5e2da6e ("bpf: netdev is never null in __dev_map_flush")
Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Naveen N. Rao says:

====================
The first patch updates DIV64 overflow tests to properly detect error
conditions. The second patch fixes powerpc64 JIT to generate the proper
unsigned division instruction for BPF_ALU64.
====================
Acked-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

BPF_ALU64 div/mod operations are currently using signed division, unlike
BPF_ALU32 operations. Fix the same. DIV64 and MOD64 overflow tests pass
with this fix.

Fixes: 156d0e29 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

If the result of the division is LLONG_MIN, current tests do not detect
the error since the return value is truncated to a 32-bit value and ends
up being 0.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Sync the changes to the flags made in "bpf: simplify definition of
BPF_FIB_LOOKUP related flags" with the BPF UAPI headers.

Doing in a separate commit to ease syncing of github/libbpf.
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Previously, the BPF_FIB_LOOKUP_{DIRECT,OUTPUT} flags in the BPF UAPI
were defined with the help of BIT macro. This had the following issues:

- In order to use any of the flags, a user was required to depend
  on <linux/bits.h>.
- No other flag in bpf.h uses the macro, so it seems that an unwritten
  convention is to use (1 << (nr)) to define BPF-related flags.

Fixes: 87f5fc7e ("bpf: Provide helper to do forwarding lookups in kernel FIB table")
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

We should not call 'ndo_bpf()' or 'dev_put()' with NULL argument.

Fixes: c9b47cc1 ("xsk: fix bug when trying to use both copy and zero-copy on one queue id")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The cloned sk should not carry its parent-listener's sk_bpf_storage.
This patch fixes it by setting it back to NULL.

Fixes: 6ac99e8f ("bpf: Introduce bpf sk local storage")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

If the leftmost parent node of the tree has does not have a child
on the left side, then trie_get_next_key (and bpftool map dump) will
not look at the child on the right.  This leads to the traversal
missing elements.

Lookup is not affected.

Update selftest to handle this case.

Reproducer:

 bpftool map create /sys/fs/bpf/lpm type lpm_trie key 6 \
     value 1 entries 256 name test_lpm flags 1
 bpftool map update pinned /sys/fs/bpf/lpm key  8 0 0 0  0   0 value 1
 bpftool map update pinned /sys/fs/bpf/lpm key 16 0 0 0  0 128 value 2
 bpftool map dump   pinned /sys/fs/bpf/lpm

Returns only 1 element. (2 expected)

Fixes: b471f2f1 ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Packets received at the NFP driver may be redirected to egress of another
netdev (e.g. in the case of OvS internal ports). On the egress path, some
processes, like TC egress hooks, may expect the network header offset
field in the skb to be correctly set. If this is not the case there is
potential for abnormal behaviour and even the triggering of BUG() calls.

Set the skb network header field before the mac header pull when doing a
packet redirect.

Fixes: 27f54b58 ("nfp: allow fallback packets from non-reprs")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 794200d6 ("tcp: undo cwnd on Fast Open spurious SYNACK
retransmit") may cause tcp_fastretrans_alert() to warn about pending
retransmission in Open state. This is triggered when the Fast Open
server both sends data and has spurious SYNACK retransmission during
the handshake, and the data packets were lost or reordered.

The root cause is a bit complicated:

(1) Upon receiving SYN-data: a full socket is created with
    snd_una = ISN + 1 by tcp_create_openreq_child()

(2) On SYNACK timeout the server/sender enters CA_Loss state.

(3) Upon receiving the final ACK to complete the handshake, sender
    does not mark FLAG_SND_UNA_ADVANCED since (1)

    Sender then calls tcp_process_loss since state is CA_loss by (2)

(4) tcp_process_loss() does not invoke undo operations but instead
    mark REXMIT_LOST to force retransmission

(5) tcp_rcv_synrecv_state_fastopen() calls tcp_try_undo_loss(). It
    changes state to CA_Open but has positive tp->retrans_out

(6) Next ACK triggers the WARN_ON in tcp_fastretrans_alert()

The step that goes wrong is (4) where the undo operation should
have been invoked because the ACK successfully acknowledged the
SYN sequence. This fixes that by specifically checking undo
when the SYN-ACK sequence is acknowledged. Then after
tcp_process_loss() the state would be further adjusted based
in tcp_fastretrans_alert() to avoid triggering the warning in (6).

Fixes: 794200d6 ("tcp: undo cwnd on Fast Open spurious SYNACK retransmit")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MPLS routing code relies on sysctl to work, so let it select PROC_SYSCTL.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Thomas Falcon says:

====================
ibmvnic: Fixes for device reset handling

This series contains three unrelated fixes to issues seen during
device resets. The first patch fixes an error when the driver requests
to deactivate the link of an uninitialized device, resulting in a
failure to reset. Next, a patch to fix multicast transmission
failures seen after a driver reset. The final patch fixes mishandling
of memory allocation failures during device initialization, which
caused a kernel oops.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The return values for these memory allocations are unchecked,
which may cause an oops if the driver does not handle them after
a failure. Fix by checking the function's return code.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It was observed that multicast packets were no longer received after
a device reset.  The fix is to resend the current multicast list to
the backing device after recovery.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check driver state before halting it during a reset. If the driver is
not running, do nothing. Otherwise, a request to deactivate a down link
can cause an error and the reset will fail.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2019-06-07

This series introduces some fixes to mlx5 driver.

Please pull and let me know if there is any problem.

For -stable v4.17
  ('net/mlx5: Avoid reloading already removed devices')

For -stable v5.0
  ('net/mlx5e: Avoid detaching non-existing netdev under switchdev mode')

For -stable v5.1
  ('net/mlx5e: Fix source port matching in fdb peer flow rule')
  ('net/mlx5e: Support tagged tunnel over bond')
  ('net/mlx5e: Add ndo_set_feature for uplink representor')
  ('net/mlx5: Update pci error handler entries and command translation')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-5.2-20190607' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2019-06-07

this is a pull reqeust of 9 patches for net/master.

The first patch is by Alexander Dahl and removes a duplicate menu entry from
the Kconfig. The next patch by Joakim Zhang fixes the timeout in the flexcan
driver when setting small bit rates. Anssi Hannula's patch for the xilinx_can
driver fixes the bittiming_const for CAN FD core. The two patches by Sean
Nyekjaer bring mcp25625 to the existing mcp251x driver. The patch by Eugen
Hristev implements an errata for the m_can driver. YueHaibing's patch fixes the
error handling ing can_init(). The patch by Fabio Estevam for the flexcan
driver removes an unneeded registration message during flexcan_probe(). And the
last patch is by Willem de Bruijn and adds the missing purging the  socket
error queue on sock destruct.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If you configure a route with multiple labels, e.g.
  ip route add 10.10.3.0/24 encap mpls 16/100 via 10.10.2.2 dev ens4
A warning is logged:
  kernel: [  130.561819] netlink: 'ip': attribute type 1 has an invalid
  length.

This happens because mpls_iptunnel_policy has set the type of
MPLS_IPTUNNEL_DST to fixed size NLA_U32.
Change it to a minimum size.
nla_get_labels() does the remaining validation.

Fixes: e3e4712e ("mpls: ip tunnel support")
Signed-off-by: George Wilkie <gwilkie@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[Resent to net instead of net-next - may clash with Anders Roxell's patch
series addressing duplicate module names]

Commit 31dd83b9 ("net-next: phy: new Asix Electronics PHY driver")
introduced a new PHY driver drivers/net/phy/asix.c that causes a module
name conflict with a pre-existiting driver (drivers/net/usb/asix.c).

The PHY driver is used by the X-Surf 100 ethernet card driver, and loaded
by that driver via its PHY ID. A rename of the driver looks unproblematic.

Rename PHY driver to ax88796b.c in order to resolve name conflict.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Fixes: 31dd83b9 ("net-next: phy: new Asix Electronics PHY driver")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before taking a refcount, make sure the object is not already
scheduled for deletion.

Same fix is needed in ipv6_flowlabel_opt()

Fixes: 18367681 ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fix an uninitialized variable:

  CC      net/ipv4/fib_semantics.o
net/ipv4/fib_semantics.c: In function 'fib_check_nh_v4_gw':
net/ipv4/fib_semantics.c:1027:12: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized]
   if (!tbl || err) {
            ^~
Signed-off-by: Enrico Weigelt <info@metux.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2019-06-07

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix several bugs in riscv64 JIT code emission which forgot to clear high
   32-bits for alu32 ops, from Björn and Luke with selftests covering all
   relevant BPF alu ops from Björn and Jiong.

2) Two fixes for UDP BPF reuseport that avoid calling the program in case of
   __udp6_lib_err and UDP GRO which broke reuseport_select_sock() assumption
   that skb->data is pointing to transport header, from Martin.

3) Two fixes for BPF sockmap: a use-after-free from sleep in psock's backlog
   workqueue, and a missing restore of sk_write_space when psock gets dropped,
   from Jakub and John.

4) Fix unconnected UDP sendmsg hook API which is insufficient as-is since it
   breaks standard applications like DNS if reverse NAT is not performed upon
   receive, from Daniel.

5) Fix an out-of-bounds read in __bpf_skc_lookup which in case of AF_INET6
   fails to verify that the length of the tuple is long enough, from Lorenz.

6) Fix libbpf's libbpf__probe_raw_btf to return an fd instead of 0/1 (for
   {un,}successful probe) as that is expected to be propagated as an fd to
   load_sk_storage_btf() and thus closing the wrong descriptor otherwise,
   from Michal.

7) Fix bpftool's JSON output for the case when a lookup fails, from Krzesimir.

8) Minor misc fixes in docs, samples and selftests, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Stacked devices like bond interface may have a VLAN device on top of
them. Detect lag state correctly under this condition, and return the
correct routed net device, according to it the encap header is built.

Fixes: e32ee6c7 ("net/mlx5e: Support tunnel encap over tagged Ethernet")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

After introducing dedicated uplink representor, the netdev instance
set over the esw manager vport (PF) became no longer in use, so it was
removed in the cited commit once we're on switchdev mode.
However, the mlx5e_detach function was not updated accordingly, and it
still tries to detach a non-existing netdev, causing a kernel crash.

This patch fixes this issue.

Fixes: aec002f6 ("net/mlx5e: Uninstantiate esw manager vport netdev on switchdev mode")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

The cited commit changed the initialization placement of the eswitch
attributes so it is done prior to parse tc actions function call,
including among others the in_rep and in_mdev fields which are mistakenly
reassigned inside the parse actions function.

This breaks the source port matching criteria of the peer redirect rule.

Fix by removing the now redundant reassignment of the already initialized
fields.

Fixes: 988ab9c7 ("net/mlx5e: Introduce mlx5e_flow_esw_attr_init() helper")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

The TX queue index returned by the fallback function ranges
between [0,NUM CHANNELS - 1] if QoS isn't set and
[0, (NUM CHANNELS)*(NUM TCs) -1] otherwise.

Our HW uses different TC mapping than the fallback function
(which is denoted as 'up', user priority) so we only need to extract
a channel number out of the returned value.

Since (NUM CHANNELS)*(NUM TCs) is a relatively small number, using
reciprocal scale almost always returns zero.
We instead access the 'txq2sq' table to extract the sq (and with it the
channel number) associated with the tx queue, thus getting
a more evenly distributed channel number.

Perf:

Rx/Tx side with Intel(R) Xeon(R) Silver 4108 CPU @ 1.80GHz and ConnectX-5.
Used 'iperf' UDP traffic, 10 threads, and priority 5.

Before:	0.566Mpps
After:	 2.37Mpps

As expected, releasing the existing bottleneck of steering all traffic
to TX queue zero significantly improves transmission rates.

Fixes: 7ccdd084 ("net/mlx5e: Fix select queue callback")
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

After we have a dedicated uplink representor, the new netdev ops
doesn't support ndo_set_feature. Because of that, we can't change
some features, eg. rxvlan. Now add it back.

In this patch, I also do a cleanup for the features flag handling,
eg. remove duplicate NETIF_F_HW_TC flag setting.

Fixes: aec002f6 ("net/mlx5e: Uninstantiate esw manager vport netdev on switchdev mode")
Signed-off-by: Chris Mi <chrism@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Prior to reloading a device we must first verify that it was not already
removed. Otherwise, the attempt to remove the device will do nothing, and
in that case we will end up proceeding with adding an new device that no
one was expecting to remove, leaving behind used resources such as EQs that
causes a failure to destroy comp EQs and syndrome (0x30f433).

Fix that by making sure that we try to remove and add a device (based on a
protocol) only if the device is already added.

Fixes: c5447c70 ("net/mlx5: E-Switch, Reload IB interface when switching devlink modes")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add missing entries for create/destroy UCTX and UMEM commands.
This could get us wrong "unknown FW command" error in flows
where we unbind the device or reset the driver.

Also the translation of these commands from opcodes to string
was missing.

Fixes: 6e3722ba ("IB/mlx5: Use the correct commands for UMEM and UCTX allocation")
Signed-off-by: Edward Srouji <edwards@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

CAN supports software tx timestamps as of the below commit. Purge
any queued timestamp packets on socket destroy.

Fixes: 51f31cab ("ip: support for TX timestamps on UDP and RAW sockets")
Reported-by: syzbot+a90604060cb40f5bdd16@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Currently the following message is observed when the flexcan
driver is probed:

flexcan 2090000.flexcan: device registered (reg_base=(ptrval), irq=23)

The reason for printing 'ptrval' is explained at
Documentation/core-api/printk-formats.rst:

"Pointers printed without a specifier extension (i.e unadorned %p) are
hashed to prevent leaking information about the kernel memory layout. This
has the added benefit of providing a unique identifier. On 64-bit machines
the first 32 bits are zeroed. The kernel will print ``(ptrval)`` until it
gathers enough entropy."

Instead of passing %pK, which can print the correct address, simply
remove the entire message as it is not really that useful.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch add error path for can_init() to avoid possible crash if some
error occurs.

Fixes: 0d66548a ("[CAN]: Add PF_CAN core module")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

During frame reception while the MCAN is in Error Passive state and the
Receive Error Counter has thevalue MCAN_ECR.REC = 127, it may happen
that MCAN_IR.MRAF is set although there was no Message RAM access
failure. If MCAN_IR.MRAF is enabled, an interrupt to the Host CPU is
generated.

Work around:
The Message RAM Access Failure interrupt routine needs to check whether

    MCAN_ECR.RP = '1' and MCAN_ECR.REC = '127'.

In this case, reset MCAN_IR.MRAF. No further action is required.
This affects versions older than 3.2.0

Errata explained on Sama5d2 SoC which includes this hardware block:
http://ww1.microchip.com/downloads/en/DeviceDoc/SAMA5D2-Family-Silicon-Errata-and-Data-Sheet-Clarification-DS80000803B.pdf
chapter 6.2

Reproducibility: If 2 devices with m_can are connected back to back,
configuring different bitrate on them will lead to interrupt storm on
the receiving side, with error "Message RAM access failure occurred".
Another way is to have a bad hardware connection. Bad wire connection
can lead to this issue as well.

This patch fixes the issue according to provided workaround.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Fully compatible with mcp2515, the mcp25625 have integrated transceiver.

This patch adds support for the mcp25625 to the existing mcp251x driver.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Fully compatible with mcp2515, the mcp25625 have integrated transceiver.

This patch add the mcp25625 to the device tree bindings documentation.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>