- 15 Aug, 2016 6 commits
-
-
Hariprasad Shenai authored
Add ndo_set_vf_mac support which allows to set the MAC address for cxgb4vf interfaces from the host Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Issue: For instance, the current APIs assume a 1-to-1 mapping of Network Ports, Physical Functions and the SR-IOV Virtual Functions of those Physical Functions. This is not the case with our cards where any Virtual Function can be hooked up to any Port -- or any number of Ports the current Linux APIs also assume only 1 Network Interface/Port can be accessed per Virtual Function. Another issue is that these APIs assume that the Administrative Driver is attached to the Physical Function Associated with a Virtual Function. This is not the case with our card where all administration is performed by a Driver which is not attached to any of the Physical Functions which have SR-IOV PCI Capabilities. Another consequence of these assumptions is the inability to utilize all of the cards SR-IOV resources. For instance, our cards have SR-IOV Capabilities on Physical Functions 0..3 and the administrative Driver attaches to Physical Function 4. Each of the Physical Functions 0..3 can support up to 16 Virtual Functions. With the current Linux APIs, a 2-Port card would only be able to use the Virtual Functions on Physical Function 0..1 and not allow the Virtual Functions on Physical Functions 2..3 to be used since there are no Ports 2..3 on a 2-Port card. Fix: Since the control node is always the netdevice for all VF ACL commands. Created a dummy netdevice for each Physical Function from 0 to 3 through which one could control their VFs. The device won't be associated with any port, since it doesn't need to transmit/receive. Its purely used for VF management purpose only. The device will be registered only when VF for a particular PF is configured using PCI sysfs interface and unregistered while pci_disable_sriov() for the PF is called. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Dmitry Torokhov says: ==================== Make /proc per net namespace objects belong to container Currently [almost] all /proc objects belong to the global root, even if data belongs to a given namespace within a container and (at least for sysctls) we work around permssions checks to allow container's root to access the data. This series changes ownership of net namespace /proc objects (/proc/net/self/* and /proc/sys/net/*) to be container's root and not global root when there exists mapping for container's root in user namespace. This helps when running Android CTS in a container, but I think it makes sense regardless. Changes from V1: - added fix for crash when !CONFIG_NET_NS (new patch #1) - addressed Eric'c comments for error handling style in patch #3 and added his Ack - adjusted patch #2 to use the same style of erro handling - sent out as series instead of separate patches ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry Torokhov authored
If net namespace is attached to a user namespace let's make container's root owner of sysctls affecting said network namespace instead of global root. This also allows us to clean up net_ctl_permissions() because we do not need to fudge permissions anymore for the container's owner since it now owns the objects in question. Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry Torokhov authored
There are certain parameters that belong to net namespace and that are exported in /proc. They should be controllable by the container's owner, but are currently owned by global root and thus not available. Let's change proc code to inherit ownership of parent entry, and when create per-ns "net" proc entry set it up as owned by container's owner. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry Torokhov authored
When CONFIG_NET_NS is disabled, registering pernet operations causes init() to be called immediately with init_net as an argument. Unfortunately this leads to some pernet ops, such as proc_net_ns_init() to be called too early, when init_net namespace has not been fully initialized. This causes issues when we want to change pernet ops to use more data from the net namespace in question, for example reference user namespace that owns our network namespace. To fix this we could either play game of musical chairs and rearrange init order, or we could do the same as when CONFIG_NET_NS is enabled, and postpone calling pernet ops->init() until namespace is set up properly. Note that we can not simply undo commit ed160e83 ("[NET]: Cleanup pernet operation without CONFIG_NET_NS") and use the same implementations for __register_pernet_operations() and __unregister_pernet_operations(), because many pernet ops are marked as __net_initdata and will be discarded, which wreaks havoc on our ops lists. Here we rely on the fact that we only use lists until init_net is fully initialized, which happens much earlier than discarding __net_initdata sections. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 13 Aug, 2016 34 commits
-
-
Colin Ian King authored
In the case where phydev->interrupts is not PHY_INTERRUPT_ENABLED function vsc85xx_ack_interrupt is returning an uninitialized garbage value. Fix this by initializing rc to zero. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
LABBE Corentin authored
This patch respell some word badly spelled. - Invidate instead of Invalidate - proble instead of probe Signed-off-by:
LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2016-08-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Not much for -next so far, but here it goes: * send more nl80211 events for interfaces * remove useless network/transport offset mangling code * validate beacon intervals identically for all interface types * use driver rate estimates for mesh * fix a compiler type/signedness warning ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Wolfram Sang says: ==================== net: don't print error when allocating urb fails This per-subsystem series is part of a tree wide cleanup. usb_alloc_urb() uses kmalloc which already prints enough information on failure. So, let's simply remove those "allocation failed" messages from drivers like we did already for other -ENOMEM cases. gkh acked this approach when we talked about it at LCJ in Tokyo a few weeks ago. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
Wolfram Sang <wsa-dev@sang-engineering.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
Wolfram Sang <wsa-dev@sang-engineering.com> Acked-by:
Woojung Huh <woojung.huh@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by:
Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Kosina authored
There are a couple of leftover symbol conflicts caused by hashtable.h being included by netdevice.h; those were not caught as build failure (they're "only" a warning, but in fact real bugs). Fix those up. Fixes: e87a8f24 ("net: resolve symbol conflicts with generic hashtable.h") Reported-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sunil Goutham says: ==================== net: thunderx: Support for newer chips and miscellaneous patches This patch series adds support for VNIC on 81xx and 83xx SOCs. 81xx/83xx is different from 88xx in terms of capabilities and new type of interfaces supported (eg: QSGMII, RGMII) and have DLMs instead of QLMs which allows single BGX to have interfaces of different LMAC types. Also included some patches which are common for all 88xx/81xx/83xx SOCs like using netdev's name while registering irqs, reset receive queue stats and some changes to use standard API for split buffer Rx packets, generating RSS key e.t.c PS: Most of the patches were submitted earlier under different series but for some reason were not picked up by patchwork. Since new patches have been added in the meantime, resubmitting all as a new patchset. Changes from v1: - Incorporated Yuval Mintz's suggestion to use generic API to set minimum queue count i.e by using netif_get_num_default_rss_queues(). - Resolved a compilation issue reported by test robot while compiling patch 'Add support for 16 LMACs of 83xx' ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
Setting BGXX_SPUX_MISC_CONTROL::RX_PACKET_DIS is not needed as packet reception is anyway disabled by BGXX_CMRX_CONFIG::DATA_PKT_RX_EN. Also setting RX_PACKET_DIS causes a bogus remote fault condition which delays link detection. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
Use standard API to generate a random RSS hash key on every boot. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Zyta Szpak authored
This patch enables parsing of inner layers for tunnelled packets. Signed-off-by:
Zyta Szpak <zr@semihalf.com> Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
This patch enables bulk freeing on the Tx side. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
Set MAC addresses only for primary VF's and don't for secondary VFs. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jerin Jacob authored
When SQ/TXQ is reclaimed i.e reset it's stats also automatically reset by HW. This is not the case with RQ. Also VF doesn't have write access to statistics counter registers. Hence a new Mbox msg is introduced which supports resetting RQ, SQ and full Qset stats. Currently only RQ stats are being reset using this mbox message. Signed-off-by:
Jerin Jacob <jerin.jacob@caviumnetworks.com> Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Radoslaw Biernacki authored
Adding debug messages in case of NACK for a mailbox message, also did small cleanups. Signed-off-by:
Radoslaw Biernacki <rad@semihalf.com> Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
Instead of a round about way of converting buffers to SKBs and combining them into a frag list, use standard skb_add_rx_frag() API to merge page fragments. This code is useful when incoming packets are of size more than RCV_FRAG_LEN which is currently set to 2048bytes. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
This patch changes the way VF's irqs are visible in /proc/interrupts. Instead of VF id, logical interface's netdev name is used for IRQ naming and also all secondary VF's interrupts in multiqset config use primary VF's netdev name. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
83xx has 4 BGX blocks and are enabled mixed QLM/DLM configs. BGX0/BGX1 are from QLM2/QLM3, BGX3 is DLM4 and BGX2 is split across DLM5 & DLM6. This patch adds support for BGX2's split config and also enables all 4 BGXs to be used. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
83xx will have 4 BGX blocks i.e 16 LMACs, to avoid changing the same with every platform, nicpf struct elements which track LMAC related info are now allocated runtime based on platform's max possible BGX count. Also fixed configuring min packet size for all LMAC's supported on a platform. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
This patch adds RGX/RGMII interface type support to BGX driver. This type of interface is supported by 81xx SOC. CN81XX VNIC has 8 VFs and max possible LMAC interfaces are 9, hence RGMII interface will not work if all DLMs are in BGX mode and all 8 LMACs are enabled Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-