- 20 Feb, 2023 33 commits
-
-
David Howells authored
Add a function to extract the pages from a user-space supplied iterator (UBUF- or IOVEC-type) into a BVEC-type iterator, retaining the pages by getting a pin on them (as FOLL_PIN) as we go. This is useful in three situations: (1) A userspace thread may have a sibling that unmaps or remaps the process's VM during the operation, changing the assignment of the pages and potentially causing an error. Retaining the pages keeps some pages around, even if this occurs; futher, we find out at the point of extraction if EFAULT is going to be incurred. (2) Pages might get swapped out/discarded if not retained, so we want to retain them to avoid the reload causing a deadlock due to a DIO from/to an mmapped region on the same file. (3) The iterator may get passed to sendmsg() by the filesystem. If a fault occurs, we may get a short write to a TCP stream that's then tricky to recover from. We don't deal with other types of iterator here, leaving it to other mechanisms to retain the pages (eg. PG_locked, PG_writeback and the pipe lock). Signed-off-by:David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: Steve French <sfrench@samba.org> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: linux-cachefs@redhat.com cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Signed-off-by:
Steve French <stfrench@microsoft.com>
-
David Howells authored
Provide cifs_splice_read() to use a bvec rather than an pipe iterator as the latter cannot so easily be split and advanced, which is necessary to pass an iterator down to the bottom levels. Upstream cifs gets around this problem by using iov_iter_get_pages() to prefill the pipe and then passing the list of pages down. This is done by: (1) Bulk-allocate a bunch of pages to carry as much of the requested amount of data as possible, but without overrunning the available slots in the pipe and add them to an ITER_BVEC. (2) Synchronously call ->read_iter() to read into the buffer. (3) Discard any unused pages. (4) Load the remaining pages into the pipe in order and advance the head pointer. Signed-off-by: -
David Howells authored
filemap_splice_read() and direct_splice_read() should be exported. Signed-off-by:
-
David Howells authored
Add a function, iov_iter_extract_pages(), to extract a list of pages from an iterator. The pages may be returned with a pin added or nothing, depending on the type of iterator. Add a second function, iov_iter_extract_will_pin(), to determine how the cleanup should be done. There are two cases: (1) ITER_IOVEC or ITER_UBUF iterator. Extracted pages will have pins (FOLL_PIN) obtained on them so that a concurrent fork() will forcibly copy the page so that DMA is done to/from the parent's buffer and is unavailable to/unaffected by the child process. iov_iter_extract_will_pin() will return true for this case. The caller should use something like unpin_user_page() to dispose of the page. (2) Any other sort of iterator. No refs or pins are obtained on the page, the assumption is made that the caller will manage page retention. iov_iter_extract_will_pin() will return false. The pages don't need additional disposal. Signed-off-by:Christoph Hellwig <hch@lst.de> Reviewed-by:
Jens Axboe <axboe@kernel.dk> cc: Al Viro <viro@zeniv.linux.org.uk> cc: John Hubbard <jhubbard@nvidia.com> cc: David Hildenbrand <david@redhat.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org Signed-off-by:
-
David Howells authored
Define flags to qualify page extraction to pass into iov_iter_*_pages*() rather than passing in FOLL_* flags. For now only a flag to allow peer-to-peer DMA is supported. Signed-off-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
-
David Howells authored
Implement a function, direct_file_splice(), that deals with this by using an ITER_BVEC iterator instead of an ITER_PIPE iterator as the former won't free its buffers when reverted. The function bulk allocates all the buffers it thinks it is going to use in advance, does the read synchronously and only then trims the buffer down. The pages we did use get pushed into the pipe. This fixes a problem with the upcoming iov_iter_extract_pages() function, whereby pages extracted from a non-user-backed iterator such as ITER_PIPE aren't pinned. __iomap_dio_rw(), however, calls iov_iter_revert() to shorten the iterator to just the bufferage it is going to use - which has the side-effect of freeing the excess pipe buffers, even though they're attached to a bio and may get written to by DMA (thanks to Hillf Danton for spotting this[1]). This then causes memory corruption that is particularly noticeable when the syzbot test[2] is run. The test boils down to: out = creat(argv[1], 0666); ftruncate(out, 0x800); lseek(out, 0x200, SEEK_SET); in = open(argv[1], O_RDONLY | O_DIRECT | O_NOFOLLOW); sendfile(out, in, NULL, 0x1dd00); run repeatedly in parallel. What I think is happening is that ftruncate() occasionally shortens the DIO read that's about to be made by sendfile's splice core by reducing i_size. This should be more efficient for DIO read by virtue of doing a bulk page allocation, but slightly less efficient by ignoring any partial page in the pipe. Reported-by: syzbot+a440341a59e3b7142895@syzkaller.appspotmail.com Signed-off-by:
-
David Howells authored
Provide a function to do splice read from a buffered file, pulling the folios out of the pagecache directly by calling filemap_get_pages() to do any required reading and then pasting the returned folios into the pipe. A helper function is provided to do the actual folio pasting and will handle multipage folios by splicing as many of the relevant subpages as will fit into the pipe. The code is loosely based on filemap_read() and might belong in mm/filemap.c with that as it needs to use filemap_get_pages(). Signed-off-by:
-
David Howells authored
filemap_get_pages() and a number of functions that it calls take an iterator to provide two things: the number of bytes to be got from the file specified and whether partially uptodate pages are allowed. Change these functions so that this information is passed in directly. This allows it to be called without having an iterator to hand. Signed-off-by:
-
Kees Cook authored
The kernel is globally removing the ambiguous 0-length and 1-element arrays in favor of flexible arrays, so that we can gain both compile-time and run-time array bounds checking[1]. Replace the trailing 1-element array with a flexible array in the following structures: struct smb2_err_rsp struct smb2_tree_connect_req struct smb2_negotiate_rsp struct smb2_sess_setup_req struct smb2_sess_setup_rsp struct smb2_read_req struct smb2_read_rsp struct smb2_write_req struct smb2_write_rsp struct smb2_query_directory_req struct smb2_query_directory_rsp struct smb2_set_info_req struct smb2_change_notify_rsp struct smb2_create_rsp struct smb2_query_info_req struct smb2_query_info_rsp Replace the trailing 1-element array with a flexible array, but leave the existing structure padding: struct smb2_file_all_info struct smb2_lock_req Adjust all related size calculations to match the changes to sizeof(). No machine code output or .data section differences are produced after these changes. [1] For lots of details, see both: https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays https://people.kernel.org/kees/bounded-flexible-arrays-in-c Cc: Steve French <sfrench@samba.org> Cc: Paulo Alcantara <pc@cjr.nz> Cc: Ronnie Sahlberg <lsahlber@redhat.com> Cc: Shyam Prasad N <sprasad@microsoft.com> Cc: Tom Talpey <tom@talpey.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Reviewed-by:Namjae Jeon <linkinjeon@kernel.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Paulo Alcantara authored
We already upcall to resolve hostnames during reconnect by calling reconn_set_ipaddr_from_hostname(), so there is no point in having a worker to periodically call it. Signed-off-by:
Paulo Alcantara (SUSE) <pc@manguebit.com> Reviewed-by <lsahlber@redhat.com> Signed-off-by:
-
Zhang Xiaoxu authored
If the MR allocate failed, the MR recovery work not initialized and list not cleared. Then will be warning and UAF when release the MR: WARNING: CPU: 4 PID: 824 at kernel/workqueue.c:3066 __flush_work.isra.0+0xf7/0x110 CPU: 4 PID: 824 Comm: mount.cifs Not tainted 6.1.0-rc5+ #82 RIP: 0010:__flush_work.isra.0+0xf7/0x110 Call Trace: <TASK> __cancel_work_timer+0x2ba/0x2e0 smbd_destroy+0x4e1/0x990 _smbd_get_connection+0x1cbd/0x2110 smbd_get_connection+0x21/0x40 cifs_get_tcp_session+0x8ef/0xda0 mount_get_conns+0x60/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 BUG: KASAN: use-after-free in smbd_destroy+0x4fc/0x990 Read of size 8 at addr ffff88810b156a08 by task mount.cifs/824 CPU: 4 PID: 824 Comm: mount.cifs Tainted: G W 6.1.0-rc5+ #82 Call Trace: dump_stack_lvl+0x34/0x44 print_report+0x171/0x472 kasan_report+0xad/0x130 smbd_destroy+0x4fc/0x990 _smbd_get_connection+0x1cbd/0x2110 smbd_get_connection+0x21/0x40 cifs_get_tcp_session+0x8ef/0xda0 mount_get_conns+0x60/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Allocated by task 824: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x7a/0x90 _smbd_get_connection+0x1b6f/0x2110 smbd_get_connection+0x21/0x40 cifs_get_tcp_session+0x8ef/0xda0 mount_get_conns+0x60/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 824: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x143/0x1b0 __kmem_cache_free+0xc8/0x330 _smbd_get_connection+0x1c6a/0x2110 smbd_get_connection+0x21/0x40 cifs_get_tcp_session+0x8ef/0xda0 mount_get_conns+0x60/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Let's initialize the MR recovery work before MR allocate to prevent the warning, remove the MRs from the list to prevent the UAF. Fixes: c7398583 ("CIFS: SMBD: Implement RDMA memory registration") Acked-by:
Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by:
Tom Talpey <tom@talpey.com> Signed-off-by:
Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
-
Zhang Xiaoxu authored
If the MR allocate failed, the smb direct connection info is NULL, then smbd_destroy() will directly return, then the connection info will be leaked. Let's set the smb direct connection info to the server before call smbd_destroy(). Fixes: c7398583 ("CIFS: SMBD: Implement RDMA memory registration") Signed-off-by:
-
Ronnie Sahlberg authored
If we did not get a lease we can still return a single use cfid to the caller. The cfid will not have has_lease set and will thus not be shared with any other concurrent users and will be freed immediately when the caller drops the handle. This avoids extra roundtrips for servers that do not support directory leases where they would first fail to get a cfid with a lease and then fallback to try a normal SMB2_open() Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Cc: stable@vger.kernel.org Reviewed-by:
Bharath SM <bharathsm@microsoft.com> Reviewed-by:
-
Ronnie Sahlberg authored
Some servers may return that we got a lease in rsp->OplockLevel but then in the lease context contradict this and say we got no lease at all. Thus we need to check the context if we have a lease. Additionally, If we do not get a lease we need to make sure we close the handle before we return an error to the caller. Signed-off-by:
-
Kees Cook authored
The kernel is globally removing the ambiguous 0-length and 1-element arrays in favor of flexible arrays, so that we can gain both compile-time and run-time array bounds checking[1]. Replace the trailing 1-element array with a flexible array in the following structures: struct cifs_spnego_msg struct cifs_quota_data struct get_dfs_referral_rsp struct file_alt_name_info NEGOTIATE_RSP SESSION_SETUP_ANDX TCONX_REQ TCONX_RSP TCONX_RSP_EXT ECHO_REQ ECHO_RSP OPEN_REQ OPENX_REQ LOCK_REQ RENAME_REQ COPY_REQ COPY_RSP NT_RENAME_REQ DELETE_FILE_REQ DELETE_DIRECTORY_REQ CREATE_DIRECTORY_REQ QUERY_INFORMATION_REQ SETATTR_REQ TRANSACT_IOCTL_REQ TRANSACT_CHANGE_NOTIFY_REQ TRANSACTION2_QPI_REQ TRANSACTION2_SPI_REQ TRANSACTION2_FFIRST_REQ TRANSACTION2_GET_DFS_REFER_REQ FILE_UNIX_LINK_INFO FILE_DIRECTORY_INFO FILE_FULL_DIRECTORY_INFO SEARCH_ID_FULL_DIR_INFO FILE_BOTH_DIRECTORY_INFO FIND_FILE_STANDARD_INFO Replace the trailing 1-element array with a flexible array, but leave the existing structure padding: FILE_ALL_INFO FILE_UNIX_INFO Remove unused structures: struct gea struct gealist Adjust all related size calculations to match the changes to sizeof(). No machine code output differences are produced after these changes. [1] For lots of details, see both: https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays https://people.kernel.org/kees/bounded-flexible-arrays-in-c Cc: Steve French <sfrench@samba.org> Cc: Paulo Alcantara <pc@cjr.nz> Cc: Ronnie Sahlberg <lsahlber@redhat.com> Cc: Shyam Prasad N <sprasad@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: -
Kees Cook authored
The kernel is globally removing the ambiguous 0-length and 1-element arrays in favor of flexible arrays, so that we can gain both compile-time and run-time array bounds checking[1]. While struct fealist is defined as a "fake" flexible array (via a 1-element array), it is only used for examination of the first array element. Walking the list is performed separately, so there is no reason to treat the "list" member of struct fealist as anything other than a single entry. Adjust the struct and code to match. Additionally, struct fea uses the "name" member either as a dynamic string, or is manually calculated from the start of the struct. Redefine the member as a flexible array. No machine code output differences are produced after these changes. [1] For lots of details, see both: https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays https://people.kernel.org/kees/bounded-flexible-arrays-in-c Cc: Steve French <sfrench@samba.org> Cc: Paulo Alcantara <pc@cjr.nz> Cc: Ronnie Sahlberg <lsahlber@redhat.com> Cc: Shyam Prasad N <sprasad@microsoft.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: -
Paulo Alcantara authored
The client was sending rfc1002 session request packet with a wrong length field set, therefore failing to mount shares against old SMB servers over port 139. Fix this by calculating the correct length as specified in rfc1002. Fixes: d7173623 ("cifs: use ALIGN() and round_up() macros") Cc: stable@vger.kernel.org Signed-off-by:
-
Volker Lendecke authored
Use a struct assignment with implicit member initialization Signed-off-by:
Volker Lendecke <vl@samba.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Namjae Jeon authored
Due to the 2bytes of padding from the smb2 tree connect request, there is an unneeded difference between the rfc1002 length and the actual frame length. In the case of windows client, it is sent by matching it exactly. Signed-off-by:
-
Matthew Wilcox (Oracle) authored
There are no more callers; remove this function before any more appear. Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by:
-
Matthew Wilcox (Oracle) authored
Avoids many calls to compound_head() and removes calls to various compat functions. Signed-off-by:
-
Volker Lendecke authored
oparms was not fully initialized Signed-off-by:
-
Stefan Metzmacher authored
The aim of using encryption on a connection is to keep the data confidential, so we must not use plaintext rdma offload for that data! It seems that current windows servers and ksmbd would allow this, but that's no reason to expose the users data in plaintext! And servers hopefully reject this in future. Note modern windows servers support signed or encrypted offload, see MS-SMB2 2.2.3.1.6 SMB2_RDMA_TRANSFORM_CAPABILITIES, but we don't support that yet. Signed-off-by:
Stefan Metzmacher <metze@samba.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: linux-cifs@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by:
-
Stefan Metzmacher authored
We should have the logic to decide if we want rdma offload in a single spot in order to advance it in future. Signed-off-by:
-
Stefan Metzmacher authored
This will simplify the following changes and makes it easy to get in passed in from the caller in future. Signed-off-by:
-
Paulo Alcantara authored
Just have @skip set to 0 after first iterations of the two nested loops. Signed-off-by:
-
Paulo Alcantara authored
Make sure to get an up-to-date TCP_Server_Info::nr_targets value prior to waiting the server to be reconnected in smb2_reconnect(). It is set in cifs_tcp_ses_needs_reconnect() and protected by TCP_Server_Info::srv_lock. Signed-off-by:
-
Steve French authored
The options that are displayed for the smb3.1.1/cifs client in "make menuconfig" are confusing because some of them are not indented making them not appear to be related to cifs.ko Fix that by adding an if/endif (similar to what ceph and 9pm did) if fs/cifs/Kconfig Suggested-by:
-
Steve French authored
There were various outdated or missing things in fs/cifs/Kconfig e.g. mention of support for insecure NTLM which has been removed, and lack of mention of some important features. This also shortens it slightly, and fixes some confusing text (e.g. the SMB1 POSIX extensions option). Reviewed-by:
-
Andy Shevchenko authored
In the smb2_get_aead_req() the skip variable is used only for the very first iteration of the two nested loops, which means it's basically in invariant to those loops. Hence, instead of using conditional on each iteration, unconditionally assign the 'skip' variable before the loops and at the end of the inner loop. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
Shyam Prasad N authored
We store the last updated time for interface list while parsing the interfaces. This change is to just print that info in DebugData. Signed-off-by:
Shyam Prasad N <sprasad@microsoft.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Zero-length arrays are deprecated[1] and we are moving towards adopting C99 flexible-array members instead. So, replace zero-length arrays in a couple of structures with flex-array members. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [2]. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays [1] Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [2] Link: https://github.com/KSPP/linux/issues/78Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
-
Christophe JAILLET authored
strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file (<linux/kstrtox.h>) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
-
- 19 Feb, 2023 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "A single fix for x86. Revert the recent change to the MTRR code which aimed to support SEV-SNP guests on Hyper-V. It caused a regression on XEN Dom0 kernels. The underlying issue of MTTR (mis)handling in the x86 code needs some deeper investigation and is definitely not 6.2 material" * tag 'x86-urgent-2023-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mtrr: Revert 90b926e6 ("x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case")
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A fix for a long standing issue in the alarmtimer code. Posix-timers armed with a short interval with an ignored signal result in an unpriviledged DoS. Due to the ignored signal the timer switches into self rearm mode. This issue had been "fixed" before but a rework of the alarmtimer code 5 years ago lost that workaround. There is no real good solution for this issue, which is also worked around in the core posix-timer code in the same way, but it certainly moved way up on the ever growing todo list" * tag 'timers-urgent-2023-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: alarmtimer: Prevent starvation by small intervals and SIG_IGN
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A single build fix for the PCI/MSI infrastructure. The addition of the new alloc/free interfaces in this cycle forgot to add stub functions for pci_msix_alloc_irq_at() and pci_msix_free_irq() for the CONFIG_PCI_MSI=n case" * tag 'irq-urgent-2023-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: PCI/MSI: Provide missing stubs for CONFIG_PCI_MSI=n
-
- 18 Feb, 2023 3 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm/x86 fixes from Paolo Bonzini: - zero all padding for KVM_GET_DEBUGREGS - fix rST warning - disable vPMU support on hybrid CPUs * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: initialize all of the kvm_debugregs structure before sending it to userspace perf/x86: Refuse to export capabilities for hybrid PMUs KVM: x86/pmu: Disable vPMU support on hybrid CPUs (host PMUs) Documentation/hw-vuln: Fix rST warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 regression fix from Will Deacon: "Apologies for the _extremely_ late pull request here, but we had a 'perf' (i.e. CPU PMU) regression on the Apple M1 reported on Wednesday [1] which was introduced by bd275681 ("perf: Rewrite core context handling") during the merge window. Mark and I looked into this and noticed an additional problem caused by the same patch, where the 'CHAIN' event (used to combine two adjacent 32-bit counters into a single 64-bit counter) was not being filtered correctly. Mark posted a series on Thursday [2] which addresses both of these regressions and I queued it the same day. The changes are small, self-contained and have been confirmed to fix the original regression. Summary: - Fix 'perf' regression for non-standard CPU PMU hardware (i.e. Apple M1)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: perf: reject CHAIN events at creation time arm_pmu: fix event CPU filtering
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fix from Jens Axboe: "I guess this is what can happen when you prep things early for going away, something else comes in last minute. This one fixes another regression in 6.2 for NVMe, from this release, and hence we should probably get it submitted for 6.2. Still waiting for the original reporter (see bugzilla linked in the commit) to test this, but Keith managed to setup and recreate the issue and tested the patch that way" * tag 'block-6.2-2023-02-17' of git://git.kernel.dk/linux: nvme-pci: refresh visible attrs for cmb attributes
-
