- 03 Sep, 2018 19 commits
-
-
Codrin Ciubotariu authored
DT binding documentation for this new ASoC driver. Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Codrin Ciubotariu authored
Add support for the MikroElektronika PROTO audio codec board. URL to the audio chip: http://www.mikroe.com/add-on-boards/audio-voice/audio-codec-proto/Signed-off-by:
Florian Meier <florian.meier@koalo.de> Signed-off-by:
-
Kuninori Morimoto authored
Main purpose of .nolock_start is we need to call some function without spinlock. OTOH we have .prepare which main purpose is called under atomic context. Then, it is called without spinlock. In summary, our main callback init/quit, and start/stop are called under "atomic context and with spinlock". And some function need to be called under "non-atomic context or without spinlock". Let's merge .nolock_start and prepare to be more clear code. Then, let's rename nolock_stop to cleanup Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by:
Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by:
-
Mark Brown authored
-
Jiada Wang authored
Currently ssiu's .init is only called once during audio stream. But SSIU with different BUSIF, shall be initialized each time, even they are used in the same audio stream. This patch introduces ssiu_status for BUSIF0 to BUSIF7 in rsnd_ssiu, to make sure same .init for different BUSIF can always be executed. To avoid the first stopped stream to stop the whole SSIU, which may still has other BUSIF instance running, use usrcnt to count the usage of SSIU, only the last user of SSIU can stop the whole SSIU. Signed-off-by:
Jiada Wang <jiada_wang@mentor.com> Signed-off-by:
Timo Wischer <twischer@de.adit-jv.com> [Kuninori: tidyup for upstream] Signed-off-by:
-
Jiada Wang authored
Currently only BUSIF0 is supported by SSIU, all register setting is done only for BUSIF. Since BUSIF1 ~ BUSIF7 has been supported, so also support these BUSIF from SSIU. One note is that we can't support SSI9-4/5/6/7 so far, because its address is out of calculation rule. Signed-off-by:
-
Jiada Wang authored
PDMACHCR setting for SSI only considers BUSIF0 so far. But BUSIF1 ~ BUSIF7 also maybe used, in the future. This patch updates table gen2_id_table_ssiu, to also consider BUSIF number used by SSI. Signed-off-by:
-
Jiada Wang authored
DMA address calculated by rsnd_dma_addr() only considers BUSIF0 so far. But BUSIF1 ~ BUSIF7 also maybe used, in the future. This patch updates DMA address calculations, to also consider BUSIF number used by SSI. One note is that we can't support SSI9-4/5/6/7 so far, because its address is out of calculation rule. Signed-off-by:
-
Jiada Wang authored
The number of channel handled by SSI maybe differs from the one set in hw_params, currently SSI checks hw_params's channel number, and constrains to use same channel number, when it is being used by multiple clients. This patch corrects to check runtime channel number rather than channel number set in hw_params. Signed-off-by:
-
Jiada Wang authored
Same SSI device may be used in different dai links, by only having one dma struct in rsnd_ssi, after the first instance's dma config be initilized, the following instances can no longer configure dma, this causes issue, when their dma data address are different from the first instance. Signed-off-by:
-
Jiada Wang authored
Currently rsnd_dai_stream *io is set to either &rdai->playback or &rdai->capture based on whether it is a playback or capture stream, in __rsnd_soc_hw_rule_* functions, but this is not necessary, rsnd_dai_stream *io handler can be get from rule->private. This patch removes 'is_play' parameter from hw_rule function. Signed-off-by:
-
Dragos Tarcatu authored
This patch adds support for SNDRV_PCM_FMTBIT_S8 format. Signed-off-by:
Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by:
-
Dragos Tarcatu authored
Signed-off-by:
-
Dragos Tarcatu authored
The slot width (system word length) was fixed at 32 bits. This patch allows also setting it to 16 or 24 bits. Signed-off-by:
-
Jiada Wang authored
Add warning message to rsnd_kctrl_accept_runtime(), when kctrl update is rejected due to corresponding dai-link is idle. So that user can notice the reason of kctrl update failure. Signed-off-by:
-
Jiada Wang authored
Clocking operations clk_get/set_rate, are non-atomic, they shouldn't be called in soc_pcm_trigger() which is atomic. Following issue was found due to execution of clk_get_rate() causes sleep in soc_pcm_trigger(), which shouldn't be blocked. We can reproduce this issue by following > enable CONFIG_DEBUG_ATOMIC_SLEEP=y > compile, and boot > mount -t debugfs none /sys/kernel/debug > while true; do cat /sys/kernel/debug/clk/clk_summary > /dev/null; done & > while true; do aplay xxx; done This patch adds support to .prepare callback, and moves non-atomic clocking operations to it. As .prepare is non-atomic, it is always called before trigger_start/trigger_stop. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 in_atomic(): 1, irqs_disabled(): 128, pid: 2242, name: aplay INFO: lockdep is turned off. irq event stamp: 5964 hardirqs last enabled at (5963): [<ffff200008e59e40>] mutex_lock_nested+0x6e8/0x6f0 hardirqs last disabled at (5964): [<ffff200008e623f0>] _raw_spin_lock_irqsave+0x24/0x68 softirqs last enabled at (5502): [<ffff200008081838>] __do_softirq+0x560/0x10c0 softirqs last disabled at (5495): [<ffff2000080c2e78>] irq_exit+0x160/0x25c Preemption disabled at:[ 62.904063] [<ffff200008be4d48>] snd_pcm_stream_lock+0xb4/0xc0 CPU: 2 PID: 2242 Comm: aplay Tainted: G B C 4.9.54+ #186 Hardware name: Renesas Salvator-X board based on r8a7795 (DT) Call trace: [<ffff20000808fe48>] dump_backtrace+0x0/0x37c [<ffff2000080901d8>] show_stack+0x14/0x1c [<ffff2000086f4458>] dump_stack+0xfc/0x154 [<ffff2000081134a0>] ___might_sleep+0x57c/0x58c [<ffff2000081136b8>] __might_sleep+0x208/0x21c [<ffff200008e5980c>] mutex_lock_nested+0xb4/0x6f0 [<ffff2000087cac74>] clk_prepare_lock+0xb0/0x184 [<ffff2000087cb094>] clk_core_get_rate+0x14/0x54 [<ffff2000087cb0f4>] clk_get_rate+0x20/0x34 [<ffff20000113aa00>] rsnd_adg_ssi_clk_try_start+0x158/0x4f8 [snd_soc_rcar] [<ffff20000113da00>] rsnd_ssi_init+0x668/0x7a0 [snd_soc_rcar] [<ffff200001133ff4>] rsnd_soc_dai_trigger+0x4bc/0xcf8 [snd_soc_rcar] [<ffff200008c1af24>] soc_pcm_trigger+0x2a4/0x2d4 Fixes: e7d850dd ("ASoC: rsnd: use mod base common method on SSI-parent") Signed-off-by:
-
Andrew F. Davis authored
These devices support detecting and reporting short circuits across the output stages. Add support for reporting these issue. Do this by registering an interrupt if available and enabling this error to trigger that interrupt in the device. Signed-off-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warning: ../sound/soc/soc-core.c:2918: warning: Excess function parameter 'legacy_dai_naming' description in 'snd_soc_register_dais' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Srinivas Kandagatla authored
Some of the router data fields are left as default zeros which are valid dai ids, so initialize these to invalid value of -1. Without intializing these correctly get_session_from_id() can return incorrect session resulting in not closing the opened copp and messing up with the copp ref count. Fixes: e3a33673 ("ASoC: qdsp6: q6routing: Add q6routing driver") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
- 31 Aug, 2018 21 commits
-
-
Andrew F. Davis authored
The TAS6426 has a register that reports channel faults such as overcurrent and continuous DC output. Add reporting of this here. Signed-off-by:
-
Mark Brown authored
-
Andrew F. Davis authored
When there is no fault bit set in a fault register we skip the fault reporting section for that register. This also skips over saving that registers value. We save the value so we will not double report an error, but if an error clears then returns we will also not report it as we did not save the all cleared register value. Fix this by saving the fault register value in the all clear path. Signed-off-by:
-
Andrew F. Davis authored
The current short version of the register name may be ambiguous when another fault register detection is added. Use the full name. While here fix comment about clearing faults, the CLEAR_FAULT register actually only clears sticky bits, which are only warnings, fault bits can only cleared by resolving the fault. Signed-off-by:
-
Kuninori Morimoto authored
Now no simple/audio cards are using legacy dai_link style for platform. Let's remove compatible code. Signed-off-by:
-
Kuninori Morimoto authored
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for audio-graph-scu-card for platform. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: -
Kuninori Morimoto authored
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for audio-graph-card for platform. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: -
Kuninori Morimoto authored
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for simple-scu-card for platform. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: -
Kuninori Morimoto authored
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for simple-card for platform. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: -
Kuninori Morimoto authored
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for simple-card-util for platform. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: -
Kuninori Morimoto authored
Current struct snd_soc_dai_link is supporting multicodec, and it is supporting legacy style of codec_name codec_of_node code_dai_name This is handled as single entry of multicodec. We don't have multicpu support yet, but in the future we will. In such case, we can use snd_soc_dai_link_component for both cpu/codec. Then the code will be more simple and readble. As next step, we want to use it for platform, too. This patch adds snd_soc_dai_link_component style for platform. We might have multiplatform support in the future, but we don't know yet. To avoid un-known issue / complex code, this patch supports just single-platform as 1st step. If we could use snd_soc_dai_link_component for all CPU/Codec/Platform, we will switch to new style, and remove legacy code. This is prepare for it. Signed-off-by:
-
Kuninori Morimoto authored
Now no simple/audio cards are using legacy dai_link style for codec. Let's remove compatible code. Signed-off-by:
-
Kuninori Morimoto authored
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for audio-graph-scu-card for codec. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: -
Kuninori Morimoto authored
audi-graph-card and audio-graph-scu-card are very similar driver, but using different feature. Thus we are keeping synchronization on these 2 drivers style, because it is easy to confirm / check. Current big difference between these 2 drivers are "dai_props" on graph_card_data (= priv). It will be difficult to keep synchronize if we will add new feature on audio-graph-scu-card. Thus, this patch synchronize it. [audio-graph] struct graph_card_data { ... struct graph_dai_props { ... } *dai_props; ... }; [audio-graph-scu] struct graph_card_data { ... struct asoc_simple_dai *dai_props; ... }; Signed-off-by: -
Kuninori Morimoto authored
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for audio-graph-card for codec. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: -
Kuninori Morimoto authored
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for simple-scu-card for codec. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: -
Kuninori Morimoto authored
simple-card and simple-scu-card are very similar driver, but using different feature. Thus we are keeping synchronization on these 2 drivers style, because it is easy to confirm / check. Current big difference between these 2 drivers are "dai_props" on simple_card_data (= priv). It will be difficult to keep synchronize if we will add new feature on simple-scu-card. Thus, this patch synchronize it. [simple] struct simple_card_data { ... struct simple_dai_props { ... } *dai_props; ... }; [simple scu] struct simple_card_data { ... struct asoc_simple_dai *dai_props; ... }; Signed-off-by: -
Kuninori Morimoto authored
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for simple-card for codec. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: -
Kuninori Morimoto authored
Current ASoC is supporting snd_soc_dai_link_component for binding, it is more useful than current legacy style. Currently only codec is supporting it as multicodec (= codecs). CPU will support multi style in the future. We want to have it on Platform too in the future. If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component style, we can remove legacy complex style. This patch supports snd_soc_dai_link_component style for simple_card_utils for codec. [current] struct snd_soc_dai_link { ... *cpu_name; *cpu_of_node; *cpu_dai_name; *codec_name; *codec_of_node; *codec_dai_name; *codecs; num_codecs; *platform_name; *platform_of_node; ... } [in the future] struct snd_soc_dai_link { ... *cpus num_cpus; *codecs; num_codecs; *platform; ... } Signed-off-by: -
Matt Flax authored
This patch adds a S/PDIF enable switch as a SOC_SINGLE. Signed-off-by:
Matt Flax <flatmax@flatmax.org> Reviewed-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Matt Flax authored
The cs4265 uses 32 bit transport on the I2S bus. This patch enables native 32 bit mode for machine drivers which use this sound card driver. Signed-off-by:
-
