- 06 Feb, 2019 40 commits
-
-
Paolo Bonzini authored
BugLink: https://bugs.launchpad.net/bugs/1811080 commit f21f165e upstream. Group together the calls to alloc_vmcs and loaded_vmcs_init. Soon we'll also allocate an MSR bitmap there. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 4.4: - No loaded_vmcs::shadow_vmcs field to initialise - Adjust context] Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com>
-
Jim Mattson authored
BugLink: https://bugs.launchpad.net/bugs/1811080 commit de3a0021 upstream. The potential performance advantages of a vmcs02 pool have never been realized. To simplify the code, eliminate the pool. Instead, a single vmcs02 is allocated per VCPU when the VCPU enters VMX operation. Signed-off-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
Mark Kanda <mark.kanda@oracle.com> Reviewed-by:
Ameya More <ameya.more@oracle.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
David Matlack authored
BugLink: https://bugs.launchpad.net/bugs/1811080 commit c9f04407 upstream. The host physical addresses of L1's Virtual APIC Page and Posted Interrupt descriptor are loaded into the VMCS02. The CPU may write to these pages via their host physical address while L2 is running, bypassing address-translation-based dirty tracking (e.g. EPT write protection). Mark them dirty on every exit from L2 to prevent them from getting out of sync with dirty tracking. Also mark the virtual APIC page and the posted interrupt descriptor dirty when KVM is virtualizing posted interrupt processing. Signed-off-by:
David Matlack <dmatlack@google.com> Reviewed-by:
-
Radim Krčmář authored
BugLink: https://bugs.launchpad.net/bugs/1811080 commit d048c098 upstream. msr bitmap can be used to avoid a VM exit (interception) on guest MSR accesses. In some configurations of VMX controls, the guest can even directly access host's x2APIC MSRs. See SDM 29.5 VIRTUALIZING MSR-BASED APIC ACCESSES. L2 could read all L0's x2APIC MSRs and write TPR, EOI, and SELF_IPI. To do so, L1 would first trick KVM to disable all possible interceptions by enabling APICv features and then would turn those features off; nested_vmx_merge_msr_bitmap() only disabled interceptions, so VMX would not intercept previously enabled MSRs even though they were not safe with the new configuration. Correctly re-enabling interceptions is not enough as a second bug would still allow L1+L2 to access host's MSRs: msr bitmap was shared for all VMCSs, so L1 could trigger a race to get the desired combination of msr bitmap and VMX controls. This fix allocates a msr bitmap for every L1 VCPU, allows only safe x2APIC MSRs from L1's msr bitmap, and disables msr bitmaps if they would have to intercept everything anyway. Fixes: 3af18d9c ("KVM: nVMX: Prepare for using hardware MSR bitmap") Reported-by:
Wincy Van <fanwenyi0529@gmail.com> Reviewed-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
-
Takashi Sakamoto authored
BugLink: https://bugs.launchpad.net/bugs/1811080 commit e11f0f90 upstream. Drivers can implement 'struct snd_pcm_ops.ioctl' to handle some requests from ALSA PCM core. These requests are internal purpose in kernel land. Usually common set of operations are used for it. SNDRV_PCM_IOCTL1_INFO is one of the requests. According to code comment, it has been obsoleted in the old days. We can see old releases in ftp.alsa-project.org. The command was firstly introduced in v0.5.0 release as SND_PCM_IOCTL1_INFO, to allow drivers to fill data of 'struct snd_pcm_channel_info' type. In v0.9.0 release, this was obsoleted by the other commands for ioctl(2) such as SNDRV_PCM_IOCTL_CHANNEL_INFO. This commit removes the long-abandoned command, bye. Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Namhyung Kim authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 70ad35db ] Maybe I'm missing something, but I don't know why it needs to copy the input buffer to psinfo->buf and then write. Instead we can write the input buffer directly. The only implementation that supports console message (i.e. ramoops) already does it for ftrace messages. For the upcoming virtio backend driver, it needs to protect psinfo->buf overwritten from console messages. If it could use ->write_buf method instead of ->write, the problem will be solved easily. Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Pan Bian authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 164f7e58 ] ocfs2_get_dentry() calls iput(inode) to drop the reference count of inode, and if the reference count hits 0, inode is freed. However, in this function, it then reads inode->i_generation, which may result in a use after free bug. Move the put operation later. Link: http://lkml.kernel.org/r/1543109237-110227-1-git-send-email-bianpan2016@163.com Fixes: 781f200c("ocfs2: Remove masklog ML_EXPORT.") Signed-off-by:
Pan Bian <bianpan2016@163.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Qian Cai authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 8de456cf ] CONFIG_DEBUG_OBJECTS_RCU_HEAD does not play well with kmemleak due to recursive calls. fill_pool kmemleak_ignore make_black_object put_object __call_rcu (kernel/rcu/tree.c) debug_rcu_head_queue debug_object_activate debug_object_init fill_pool kmemleak_ignore make_black_object ... So add SLAB_NOLEAKTRACE to kmem_cache_create() to not register newly allocated debug objects at all. Link: http://lkml.kernel.org/r/20181126165343.2339-1-cai@gmx.usSigned-off-by:
Qian Cai <cai@gmx.us> Suggested-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Waiman Long <longman@redhat.com> Acked-by:
-
Pan Bian authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit c7d7d620 ] hfs_bmap_free() frees node via hfs_bnode_put(node). However it then reads node->this when dumping error message on an error path, which may result in a use-after-free bug. This patch frees node only when it is never used. Link: http://lkml.kernel.org/r/1543053441-66942-1-git-send-email-bianpan2016@163.comSigned-off-by:
-
Pan Bian authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit ce96a407 ] hfs_bmap_free() frees the node via hfs_bnode_put(node). However, it then reads node->this when dumping error message on an error path, which may result in a use-after-free bug. This patch frees the node only when it is never again used. Link: http://lkml.kernel.org/r/1542963889-128825-1-git-send-email-bianpan2016@163.com Fixes: a1185ffa2fc ("HFS rewrite") Signed-off-by:
-
Larry Chen authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit e21e5744 ] ocfs2_defrag_extent may fall into deadlock. ocfs2_ioctl_move_extents ocfs2_ioctl_move_extents ocfs2_move_extents ocfs2_defrag_extent ocfs2_lock_allocators_move_extents ocfs2_reserve_clusters inode_lock GLOBAL_BITMAP_SYSTEM_INODE __ocfs2_flush_truncate_log inode_lock GLOBAL_BITMAP_SYSTEM_INODE As backtrace shows above, ocfs2_reserve_clusters() will call inode_lock against the global bitmap if local allocator has not sufficient cluters. Once global bitmap could meet the demand, ocfs2_reserve_cluster will return success with global bitmap locked. After ocfs2_reserve_cluster(), if truncate log is full, __ocfs2_flush_truncate_log() will definitely fall into deadlock because it needs to inode_lock global bitmap, which has already been locked. To fix this bug, we could remove from ocfs2_lock_allocators_move_extents() the code which intends to lock global allocator, and put the removed code after __ocfs2_flush_truncate_log(). ocfs2_lock_allocators_move_extents() is referred by 2 places, one is here, the other does not need the data allocator context, which means this patch does not affect the caller so far. Link: http://lkml.kernel.org/r/20181101071422.14470-1-lchen@suse.comSigned-off-by:
Larry Chen <lchen@suse.com> Reviewed-by:
Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 31ffa563 ] Variable 'cache' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'cache' set but not used [-Wunused-but-set-variable] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
NeilBrown authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit c5a94f43 ] It was observed that a process blocked indefintely in __fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP to be cleared via fscache_wait_for_deferred_lookup(). At this time, ->backing_objects was empty, which would normaly prevent __fscache_read_or_alloc_page() from getting to the point of waiting. This implies that ->backing_objects was cleared *after* __fscache_read_or_alloc_page was was entered. When an object is "killed" and then "dropped", FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is ->backing_objects cleared. This leaves a window where something else can set FSCACHE_COOKIE_LOOKING_UP and __fscache_read_or_alloc_page() can start waiting, before ->backing_objects is cleared There is some uncertainty in this analysis, but it seems to be fit the observations. Adding the wake in this patch will be handled correctly by __fscache_read_or_alloc_page(), as it checks if ->backing_objects is empty again, after waiting. Customer which reported the hang, also report that the hang cannot be reproduced with this fix. The backtrace for the blocked process looked like: PID: 29360 TASK: ffff881ff2ac0f80 CPU: 3 COMMAND: "zsh" #0 [ffff881ff43efbf8] schedule at ffffffff815e56f1 #1 [ffff881ff43efc58] bit_wait at ffffffff815e64ed #2 [ffff881ff43efc68] __wait_on_bit at ffffffff815e61b8 #3 [ffff881ff43efca0] out_of_line_wait_on_bit at ffffffff815e625e #4 [ffff881ff43efd08] fscache_wait_for_deferred_lookup at ffffffffa04f2e8f [fscache] #5 [ffff881ff43efd18] __fscache_read_or_alloc_page at ffffffffa04f2ffe [fscache] #6 [ffff881ff43efd58] __nfs_readpage_from_fscache at ffffffffa0679668 [nfs] #7 [ffff881ff43efd78] nfs_readpage at ffffffffa067092b [nfs] #8 [ffff881ff43efda0] generic_file_read_iter at ffffffff81187a73 #9 [ffff881ff43efe50] nfs_file_read at ffffffffa066544b [nfs] #10 [ffff881ff43efe70] __vfs_read at ffffffff811fc756 #11 [ffff881ff43efee8] vfs_read at ffffffff811fccfa #12 [ffff881ff43eff18] sys_read at ffffffff811fda62 #13 [ffff881ff43eff50] entry_SYSCALL_64_fastpath at ffffffff815e986e Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
Srikanth Boddepalli authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 72791ac8 ] Add a missing header otherwise compiler warns about missed prototype: drivers/xen/xlate_mmu.c:183:5: warning: no previous prototype for 'xen_xlate_unmap_gfn_range?' [-Wmissing-prototypes] int xen_xlate_unmap_gfn_range(struct vm_area_struct *vma, ^~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by:
Srikanth Boddepalli <boddepalli.srikanth@gmail.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by:
Joey Pabalinas <joeypabalinas@gmail.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Y.C. Chen authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 30062562 ] v1: over-sample data to increase the stability with some specific monitors v2: refine to avoid infinite loop v3: remove un-necessary "volatile" declaration [airlied: fix two checkpatch warnings] Signed-off-by:
Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1542858988-1127-1-git-send-email-yc_chen@aspeedtech.comSigned-off-by:
-
Pan Bian authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit c7589401 ] The net device ndev is freed via free_netdev when failing to register the device. The control flow then jumps to the error handling code block. ndev is used and freed again. Resulting in a use-after-free bug. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Josh Elsasser authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit a8bf879a ] Add the two 1000BaseLX enum values to the X550's check for 1Gbps modules, allowing the core driver code to establish a link over this SFP type. This is done by the out-of-tree driver but the fix wasn't in mainline. Fixes: e23f3336 ("ixgbe: Fix 1G and 10G link stability for X550EM_x SFP+”) Fixes: 6a14ee0c ("ixgbe: Add X550 support function pointers") Signed-off-by:
Josh Elsasser <jelsasser@appneta.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Lorenzo Bianconi authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 24a6d2dd ] Fix a possible NULL pointer dereference in nic_remove routine removing the nicpf module if nic_probe fails. The issue can be triggered with the following reproducer: $rmmod nicvf $rmmod nicpf [ 521.412008] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000014 [ 521.422777] Mem abort info: [ 521.425561] ESR = 0x96000004 [ 521.428624] Exception class = DABT (current EL), IL = 32 bits [ 521.434535] SET = 0, FnV = 0 [ 521.437579] EA = 0, S1PTW = 0 [ 521.440730] Data abort info: [ 521.443603] ISV = 0, ISS = 0x00000004 [ 521.447431] CM = 0, WnR = 0 [ 521.450417] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000072a3da42 [ 521.457022] [0000000000000014] pgd=0000000000000000 [ 521.461916] Internal error: Oops: 96000004 [#1] SMP [ 521.511801] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018 [ 521.518664] pstate: 80400005 (Nzcv daif +PAN -UAO) [ 521.523451] pc : nic_remove+0x24/0x88 [nicpf] [ 521.527808] lr : pci_device_remove+0x48/0xd8 [ 521.532066] sp : ffff000013433cc0 [ 521.535370] x29: ffff000013433cc0 x28: ffff810f6ac50000 [ 521.540672] x27: 0000000000000000 x26: 0000000000000000 [ 521.545974] x25: 0000000056000000 x24: 0000000000000015 [ 521.551274] x23: ffff8007ff89a110 x22: ffff000001667070 [ 521.556576] x21: ffff8007ffb170b0 x20: ffff8007ffb17000 [ 521.561877] x19: 0000000000000000 x18: 0000000000000025 [ 521.567178] x17: 0000000000000000 x16: 000000000000010ffc33ff98 x8 : 0000000000000000 [ 521.593683] x7 : 0000000000000000 x6 : 0000000000000001 [ 521.598983] x5 : 0000000000000002 x4 : 0000000000000003 [ 521.604284] x3 : ffff8007ffb17184 x2 : ffff8007ffb17184 [ 521.609585] x1 : ffff000001662118 x0 : ffff000008557be0 [ 521.614887] Process rmmod (pid: 1897, stack limit = 0x00000000859535c3) [ 521.621490] Call trace: [ 521.623928] nic_remove+0x24/0x88 [nicpf] [ 521.627927] pci_device_remove+0x48/0xd8 [ 521.631847] device_release_driver_internal+0x1b0/0x248 [ 521.637062] driver_detach+0x50/0xc0 [ 521.640628] bus_remove_driver+0x60/0x100 [ 521.644627] driver_unregister+0x34/0x60 [ 521.648538] pci_unregister_driver+0x24/0xd8 [ 521.652798] nic_cleanup_module+0x14/0x111c [nicpf] [ 521.657672] __arm64_sys_delete_module+0x150/0x218 [ 521.662460] el0_svc_handler+0x94/0x110 [ 521.666287] el0_svc+0x8/0xc [ 521.669160] Code: aa1e03e0 9102c295 d503201f f9404eb3 (b9401660) Fixes: 4863dea3 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Yi Wang authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 354cb410 ] We get the following warnings about empty statements when building with 'W=1': arch/x86/kvm/lapic.c:632:53: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] arch/x86/kvm/lapic.c:1907:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] arch/x86/kvm/lapic.c:1936:65: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] arch/x86/kvm/lapic.c:1975:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] Rework the debug helper macro to get rid of these warnings. Signed-off-by:
Yi Wang <wang.yi59@zte.com.cn> Signed-off-by:
-
Aaro Koskinen authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 2c2322fb ] On Palm TE nothing happens when you try to use gadget drivers and plug the USB cable. Fix by adding the board to the vbus sense quirk list. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Aaro Koskinen authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 6ca6695f ] On OMAP 15xx machines there are no transceivers, and omap_udc_start() always fails as it forgot to adjust the default return value. Signed-off-by:
-
Aaro Koskinen authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 99f70036 ] We currently crash if usb_add_gadget_udc_release() fails, since the udc->done is not initialized until in the remove function. Furthermore, on module removal the udc data is accessed although the release function is already triggered by usb_del_gadget_udc() early in the function. Fix by rewriting the release and remove functions, basically moving all the cleanup into the release function, and doing the completion only in the module removal case. The patch fixes omap_udc module probe with a failing gadged, and also allows the removal of omap_udc. Tested by running "modprobe omap_udc; modprobe -r omap_udc" in a loop. Signed-off-by:
-
Aaro Koskinen authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 286afdde ] The current code fails to release the third irq on the error path (observed by reading the code), and we get also multiple WARNs with failing gadget drivers due to duplicate IRQ releases. Fix by using devm_request_irq(). Signed-off-by:
-
Martynas Pumputis authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 1efb6ee3 ] A format string consisting of "%p" or "%s" followed by an invalid specifier (e.g. "%p%\n" or "%s%") could pass the check which would make format_decode (lib/vsprintf.c) to warn. Fixes: 9c959c86 ("tracing: Allow BPF programs to call bpf_trace_printk()") Reported-by: syzbot+1ec5c5ec949c4adaa0c4@syzkaller.appspotmail.com Signed-off-by:
Martynas Pumputis <m@lambda.lt> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Pan Bian authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 2084ac6c ] The function dentry_connected calls dput(dentry) to drop the previously acquired reference to dentry. In this case, dentry can be released. After that, IS_ROOT(dentry) checks the condition (dentry == dentry->d_parent), which may result in a use-after-free bug. This patch directly compares dentry with its parent obtained before dropping the reference. Fixes: a056cc89("exportfs: stop retrying once we race with rename/remove") Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Peter Ujfalusi authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit ffdcc363 ] We need to block sleep states which would require longer time to leave than the time the DMA must react to the DMA request in order to keep the FIFO serviced without overrun. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by:
Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Peter Ujfalusi authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 373a500e ] We need to block sleep states which would require longer time to leave than the time the DMA must react to the DMA request in order to keep the FIFO serviced without under of overrun. Signed-off-by:
-
Robbie Ko authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit a4390aee ] When doing an incremental send, due to the need of delaying directory move (rename) operations we can end up in infinite loop at apply_children_dir_moves(). An example scenario that triggers this problem is described below, where directory names correspond to the numbers of their respective inodes. Parent snapshot: . |--- 261/ |--- 271/ |--- 266/ |--- 259/ |--- 260/ | |--- 267 | |--- 264/ | |--- 258/ | |--- 257/ | |--- 265/ |--- 268/ |--- 269/ | |--- 262/ | |--- 270/ |--- 272/ | |--- 263/ | |--- 275/ | |--- 274/ |--- 273/ Send snapshot: . |-- 275/ |-- 274/ |-- 273/ |-- 262/ |-- 269/ |-- 258/ |-- 271/ |-- 268/ |-- 267/ |-- 270/ |-- 259/ | |-- 265/ | |-- 272/ |-- 257/ |-- 260/ |-- 264/ |-- 263/ |-- 261/ |-- 266/ When processing inode 257 we delay its move (rename) operation because its new parent in the send snapshot, inode 272, was not yet processed. Then when processing inode 272, we delay the move operation for that inode because inode 274 is its ancestor in the send snapshot. Finally we delay the move operation for inode 274 when processing it because inode 275 is its new parent in the send snapshot and was not yet moved. When finishing processing inode 275, we start to do the move operations that were previously delayed (at apply_children_dir_moves()), resulting in the following iterations: 1) We issue the move operation for inode 274; 2) Because inode 262 depended on the move operation of inode 274 (it was delayed because 274 is its ancestor in the send snapshot), we issue the move operation for inode 262; 3) We issue the move operation for inode 272, because it was delayed by inode 274 too (ancestor of 272 in the send snapshot); 4) We issue the move operation for inode 269 (it was delayed by 262); 5) We issue the move operation for inode 257 (it was delayed by 272); 6) We issue the move operation for inode 260 (it was delayed by 272); 7) We issue the move operation for inode 258 (it was delayed by 269); 8) We issue the move operation for inode 264 (it was delayed by 257); 9) We issue the move operation for inode 271 (it was delayed by 258); 10) We issue the move operation for inode 263 (it was delayed by 264); 11) We issue the move operation for inode 268 (it was delayed by 271); 12) We verify if we can issue the move operation for inode 270 (it was delayed by 271). We detect a path loop in the current state, because inode 267 needs to be moved first before we can issue the move operation for inode 270. So we delay again the move operation for inode 270, this time we will attempt to do it after inode 267 is moved; 13) We issue the move operation for inode 261 (it was delayed by 263); 14) We verify if we can issue the move operation for inode 266 (it was delayed by 263). We detect a path loop in the current state, because inode 270 needs to be moved first before we can issue the move operation for inode 266. So we delay again the move operation for inode 266, this time we will attempt to do it after inode 270 is moved (its move operation was delayed in step 12); 15) We issue the move operation for inode 267 (it was delayed by 268); 16) We verify if we can issue the move operation for inode 266 (it was delayed by 270). We detect a path loop in the current state, because inode 270 needs to be moved first before we can issue the move operation for inode 266. So we delay again the move operation for inode 266, this time we will attempt to do it after inode 270 is moved (its move operation was delayed in step 12). So here we added again the same delayed move operation that we added in step 14; 17) We attempt again to see if we can issue the move operation for inode 266, and as in step 16, we realize we can not due to a path loop in the current state due to a dependency on inode 270. Again we delay inode's 266 rename to happen after inode's 270 move operation, adding the same dependency to the empty stack that we did in steps 14 and 16. The next iteration will pick the same move dependency on the stack (the only entry) and realize again there is still a path loop and then again the same dependency to the stack, over and over, resulting in an infinite loop. So fix this by preventing adding the same move dependency entries to the stack by removing each pending move record from the red black tree of pending moves. This way the next call to get_pending_dir_moves() will not return anything for the current parent inode. A test case for fstests, with this reproducer, follows soon. Signed-off-by:
Robbie Ko <robbieko@synology.com> Reviewed-by:
Filipe Manana <fdmanana@suse.com> [Wrote changelog with example and more clear explanation] Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Huacai Chen authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 09aaf681 ] Both datasheet and comments of store_temp_mode() tell us that temp1~4_type is writable, so fix it. Signed-off-by:
Yao Wang <wangyao@lemote.com> Signed-off-by:
Huacai Chen <chenhc@lemote.com> Fixes: 39deb699 (" hwmon: (w83795) Simplify temperature sensor type handling") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Tzung-Bi Shih authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 882eab6c ] Audio map are possible in wrong state before card->instantiated has been set to true. Imaging the following examples: time 1: at the beginning in:-1 in:-1 in:-1 in:-1 out:-1 out:-1 out:-1 out:-1 SIGGEN A B Spk time 2: after someone called snd_soc_dapm_new_widgets() (e.g. create_fill_widget_route_map() in sound/soc/codecs/hdac_hdmi.c) in:1 in:0 in:0 in:0 out:0 out:0 out:0 out:1 SIGGEN A B Spk time 3: routes added in:1 in:0 in:0 in:0 out:0 out:0 out:0 out:1 SIGGEN -----> A -----> B ---> Spk In the end, the path should be powered on but it did not. At time 3, "in" of SIGGEN and "out" of Spk did not propagate to their neighbors because snd_soc_dapm_add_path() will not invalidate the paths if the card has not instantiated (i.e. card->instantiated is false). To correct the state of audio map, recalculate the whole map forcely. Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Signed-off-by:
-
Nicolin Chen authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 38cd989e ] The current register (04h) has a sign bit at MSB. The comments for this calculation also mention that it's a signed register. However, the regval is unsigned type so result of calculation turns out to be an incorrect value when current is negative. This patch simply fixes this by adding a casting to s16. Fixes: 5d389b12 ("hwmon: (ina2xx) Make calibration register value fixed") Signed-off-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
-
Thomas Richter authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 613a41b0 ] On s390 command perf top fails [root@s35lp76 perf] # ./perf top -F100000 --stdio Error: cycles: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' [root@s35lp76 perf] # Using event -e rb0000 works as designed. Event rb0000 is the event number of the sampling facility for basic sampling. During system start up the following PMUs are installed in the kernel's PMU list (from head to tail): cpum_cf --> s390 PMU counter facility device driver cpum_sf --> s390 PMU sampling facility device driver uprobe kprobe tracepoint task_clock cpu_clock Perf top executes following functions and calls perf_event_open(2) system call with different parameters many times: cmd_top --> __cmd_top --> perf_evlist__add_default --> __perf_evlist__add_default --> perf_evlist__new_cycles (creates event type:0 (HW) config 0 (CPU_CYCLES) --> perf_event_attr__set_max_precise_ip Uses perf_event_open(2) to detect correct precise_ip level. Fails 3 times on s390 which is ok. Then functions cmd_top --> __cmd_top --> perf_top__start_counters -->perf_evlist__config --> perf_can_comm_exec --> perf_probe_api This functions test support for the following events: "cycles:u", "instructions:u", "cpu-clock:u" using --> perf_do_probe_api --> perf_event_open_cloexec Test the close on exec flag support with perf_event_open(2). perf_do_probe_api returns true if the event is supported. The function returns true because event cpu-clock is supported by the PMU cpu_clock. This is achieved by many calls to perf_event_open(2). Function perf_top__start_counters now calls perf_evsel__open() for every event, which is the default event cpu_cycles (config:0) and type HARDWARE (type:0) which a predfined frequence of 4000. Given the above order of the PMU list, the PMU cpum_cf gets called first and returns 0, which indicates support for this sampling. The event is fully allocated in the function perf_event_open (file kernel/event/core.c near line 10521 and the following check fails: event = perf_event_alloc(&attr, cpu, task, group_leader, NULL, NULL, NULL, cgroup_fd); if (IS_ERR(event)) { err = PTR_ERR(event); goto err_cred; } if (is_sampling_event(event)) { if (event->pmu->capabilities & PERF_PMU_CAP_NO_INTERRUPT) { err = -EOPNOTSUPP; goto err_alloc; } } The check for the interrupt capabilities fails and the system call perf_event_open() returns -EOPNOTSUPP (-95). Add a check to return -ENODEV when sampling is requested in PMU cpum_cf. This allows common kernel code in the perf_event_open() system call to test the next PMU in above list. Fixes: 97b1198f (" "s390, perf: Use common PMU interrupt disabled code") Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit c4b7d1ba ] Fixes gcc '-Wunused-but-set-variable' warning: fs/sysv/inode.c: In function '__sysv_write_inode': fs/sysv/inode.c:239:6: warning: variable 'err' set but not used [-Wunused-but-set-variable] __sysv_write_inode should return 'err' instead of 0 Fixes: 05459ca8 ("repair sysv_write_inode(), switch sysv to simple_fsync()") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Janusz Krzysztofik authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit cec83ff1 ] While playing with initialization order of modem device, it has been discovered that under some circumstances (early console init, I believe) its .pm() callback may be called before the uart_port->private_data pointer is initialized from plat_serial8250_port->private_data, resulting in NULL pointer dereference. Fix it by checking for uninitialized pointer before using it in modem_pm(). Fixes: aabf3173 ("ARM: OMAP1: ams-delta: update the modem to use regulator API") Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit eef3dc34 ] When building the kernel with Clang, the following section mismatch warning appears: WARNING: vmlinux.o(.text+0x38b3c): Section mismatch in reference from the function omap44xx_prm_late_init() to the function .init.text:omap44xx_prm_enable_io_wakeup() The function omap44xx_prm_late_init() references the function __init omap44xx_prm_enable_io_wakeup(). This is often because omap44xx_prm_late_init lacks a __init annotation or the annotation of omap44xx_prm_enable_io_wakeup is wrong. Remove the __init annotation from omap44xx_prm_enable_io_wakeup so there is no more mismatch. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Stefano Brivio authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit e6ac64d4 ] While skb_push() makes the kernel panic if the skb headroom is less than the unaligned hardware header size, it will proceed normally in case we copy more than that because of alignment, and we'll silently corrupt adjacent slabs. In the case fixed by the previous patch, "ipv6: Check available headroom in ip6_xmit() even without options", we end up in neigh_hh_output() with 14 bytes headroom, 14 bytes hardware header and write 16 bytes, starting 2 bytes before the allocated buffer. Always check we're not writing before skb->head and, if the headroom is not enough, warn and drop the packet. v2: - instead of panicking with BUG_ON(), WARN_ON_ONCE() and drop the packet (Eric Dumazet) - if we avoid the panic, though, we need to explicitly check the headroom before the memcpy(), otherwise we'll have corrupted slabs on a running kernel, after we warn - use __skb_push() instead of skb_push(), as the headroom check is already implemented here explicitly (Eric Dumazet) Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Nicolas Dichtel authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 35b827b6 ] It's not supported right now (the goal of the initial patch was to support 'ip link del' only). Before the patch: $ ip link add foo type tun [ 239.632660] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [snip] [ 239.636410] RIP: 0010:register_netdevice+0x8e/0x3a0 This panic occurs because dev->netdev_ops is not set by tun_setup(). But to have something usable, it will require more than just setting netdev_ops. Fixes: f019a7a5 ("tun: Implement ip link del tunXXX") CC: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Yuchung Cheng authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit b2b7af86 ] TCP loss probe timer may fire when the retranmission queue is empty but has a non-zero tp->packets_out counter. tcp_send_loss_probe will call tcp_rearm_rto which triggers NULL pointer reference by fetching the retranmission queue head in its sub-routines. Add a more detailed warning to help catch the root cause of the inflight accounting inconsistency. Reported-by:
Rafael Tinoco <rafael.tinoco@linaro.org> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 68883893 ] kmsan was able to trigger a kernel-infoleak using a gre device [1] nlmsg_populate_fdb_fill() has a hard coded assumption that dev->addr_len is ETH_ALEN, as normally guaranteed for ARPHRD_ETHER devices. A similar issue was fixed recently in commit da715775 ("rtnetlink: Disallow FDB configuration for non-Ethernet device") [1] BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:143 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576 CPU: 0 PID: 6697 Comm: syz-executor310 Not tainted 4.20.0-rc3+ #95 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x32d/0x480 lib/dump_stack.c:113 kmsan_report+0x12c/0x290 mm/kmsan/kmsan.c:683 kmsan_internal_check_memory+0x32a/0xa50 mm/kmsan/kmsan.c:743 kmsan_copy_to_user+0x78/0xd0 mm/kmsan/kmsan_hooks.c:634 copyout lib/iov_iter.c:143 [inline] _copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576 copy_to_iter include/linux/uio.h:143 [inline] skb_copy_datagram_iter+0x4e2/0x1070 net/core/datagram.c:431 skb_copy_datagram_msg include/linux/skbuff.h:3316 [inline] netlink_recvmsg+0x6f9/0x19d0 net/netlink/af_netlink.c:1975 sock_recvmsg_nosec net/socket.c:794 [inline] sock_recvmsg+0x1d1/0x230 net/socket.c:801 ___sys_recvmsg+0x444/0xae0 net/socket.c:2278 __sys_recvmsg net/socket.c:2327 [inline] __do_sys_recvmsg net/socket.c:2337 [inline] __se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334 __x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x441119 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffc7f008a8 EFLAGS: 00000207 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000441119 RDX: 0000000000000040 RSI: 00000000200005c0 RDI: 0000000000000003 RBP: 00000000006cc018 R08: 0000000000000100 R09: 0000000000000100 R10: 0000000000000100 R11: 0000000000000207 R12: 0000000000402080 R13: 0000000000402110 R14: 0000000000000000 R15: 0000000000000000 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline] kmsan_save_stack mm/kmsan/kmsan.c:261 [inline] kmsan_internal_chain_origin+0x13d/0x240 mm/kmsan/kmsan.c:469 kmsan_memcpy_memmove_metadata+0x1a9/0xf70 mm/kmsan/kmsan.c:344 kmsan_memcpy_metadata+0xb/0x10 mm/kmsan/kmsan.c:362 __msan_memcpy+0x61/0x70 mm/kmsan/kmsan_instr.c:162 __nla_put lib/nlattr.c:744 [inline] nla_put+0x20a/0x2d0 lib/nlattr.c:802 nlmsg_populate_fdb_fill+0x444/0x810 net/core/rtnetlink.c:3466 nlmsg_populate_fdb net/core/rtnetlink.c:3775 [inline] ndo_dflt_fdb_dump+0x73a/0x960 net/core/rtnetlink.c:3807 rtnl_fdb_dump+0x1318/0x1cb0 net/core/rtnetlink.c:3979 netlink_dump+0xc79/0x1c90 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x10c4/0x11d0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:216 [inline] rtnetlink_rcv_msg+0x141b/0x1540 net/core/rtnetlink.c:4910 netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116 __sys_sendmsg net/socket.c:2154 [inline] __do_sys_sendmsg net/socket.c:2163 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2161 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline] kmsan_internal_poison_shadow+0x6d/0x130 mm/kmsan/kmsan.c:170 kmsan_kmalloc+0xa1/0x100 mm/kmsan/kmsan_hooks.c:186 __kmalloc+0x14c/0x4d0 mm/slub.c:3825 kmalloc include/linux/slab.h:551 [inline] __hw_addr_create_ex net/core/dev_addr_lists.c:34 [inline] __hw_addr_add_ex net/core/dev_addr_lists.c:80 [inline] __dev_mc_add+0x357/0x8a0 net/core/dev_addr_lists.c:670 dev_mc_add+0x6d/0x80 net/core/dev_addr_lists.c:687 ip_mc_filter_add net/ipv4/igmp.c:1128 [inline] igmp_group_added+0x4d4/0xb80 net/ipv4/igmp.c:1311 __ip_mc_inc_group+0xea9/0xf70 net/ipv4/igmp.c:1444 ip_mc_inc_group net/ipv4/igmp.c:1453 [inline] ip_mc_up+0x1c3/0x400 net/ipv4/igmp.c:1775 inetdev_event+0x1d03/0x1d80 net/ipv4/devinet.c:1522 notifier_call_chain kernel/notifier.c:93 [inline] __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x13d/0x240 kernel/notifier.c:401 __dev_notify_flags+0x3da/0x860 net/core/dev.c:1733 dev_change_flags+0x1ac/0x230 net/core/dev.c:7569 do_setlink+0x165f/0x5ea0 net/core/rtnetlink.c:2492 rtnl_newlink+0x2ad7/0x35a0 net/core/rtnetlink.c:3111 rtnetlink_rcv_msg+0x1148/0x1540 net/core/rtnetlink.c:4947 netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116 __sys_sendmsg net/socket.c:2154 [inline] __do_sys_sendmsg net/socket.c:2163 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2161 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Bytes 36-37 of 105 are uninitialized Memory access of size 105 starts at ffff88819686c000 Data copied to user address 0000000020000380 Fixes: d83b0603 ("net: add fdb generic dump routine") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Christoph Paasch authored
BugLink: https://bugs.launchpad.net/bugs/1811080 [ Upstream commit 9410d386 ] __qdisc_drop_all() accesses skb->prev to get to the tail of the segment-list. With commit 68d2f84a ("net: gro: properly remove skb from list") the skb-list handling has been changed to set skb->next to NULL and set the list-poison on skb->prev. With that change, __qdisc_drop_all() will panic when it tries to dereference skb->prev. Since commit 992cba7e ("net: Add and use skb_list_del_init().") __list_del_entry is used, leaving skb->prev unchanged (thus, pointing to the list-head if it's the first skb of the list). This will make __qdisc_drop_all modify the next-pointer of the list-head and result in a panic later on: [ 34.501053] general protection fault: 0000 [#1] SMP KASAN PTI [ 34.501968] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.20.0-rc2.mptcp #108 [ 34.502887] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 [ 34.504074] RIP: 0010:dev_gro_receive+0x343/0x1f90 [ 34.504751] Code: e0 48 c1 e8 03 42 80 3c 30 00 0f 85 4a 1c 00 00 4d 8b 24 24 4c 39 65 d0 0f 84 0a 04 00 00 49 8d 7c 24 38 48 89 f8 48 c1 e8 03 <42> 0f b6 04 30 84 c0 74 08 3c 04 [ 34.507060] RSP: 0018:ffff8883af507930 EFLAGS: 00010202 [ 34.507761] RAX: 0000000000000007 RBX: ffff8883970b2c80 RCX: 1ffff11072e165a6 [ 34.508640] RDX: 1ffff11075867008 RSI: ffff8883ac338040 RDI: 0000000000000038 [ 34.509493] RBP: ffff8883af5079d0 R08: ffff8883970b2d40 R09: 0000000000000062 [ 34.510346] R10: 0000000000000034 R11: 0000000000000000 R12: 0000000000000000 [ 34.511215] R13: 0000000000000000 R14: dffffc0000000000 R15: ffff8883ac338008 [ 34.512082] FS: 0000000000000000(0000) GS:ffff8883af500000(0000) knlGS:0000000000000000 [ 34.513036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 34.513741] CR2: 000055ccc3e9d020 CR3: 00000003abf32000 CR4: 00000000000006e0 [ 34.514593] Call Trace: [ 34.514893] <IRQ> [ 34.515157] napi_gro_receive+0x93/0x150 [ 34.515632] receive_buf+0x893/0x3700 [ 34.516094] ? __netif_receive_skb+0x1f/0x1a0 [ 34.516629] ? virtnet_probe+0x1b40/0x1b40 [ 34.517153] ? __stable_node_chain+0x4d0/0x850 [ 34.517684] ? kfree+0x9a/0x180 [ 34.518067] ? __kasan_slab_free+0x171/0x190 [ 34.518582] ? detach_buf+0x1df/0x650 [ 34.519061] ? lapic_next_event+0x5a/0x90 [ 34.519539] ? virtqueue_get_buf_ctx+0x280/0x7f0 [ 34.520093] virtnet_poll+0x2df/0xd60 [ 34.520533] ? receive_buf+0x3700/0x3700 [ 34.521027] ? qdisc_watchdog_schedule_ns+0xd5/0x140 [ 34.521631] ? htb_dequeue+0x1817/0x25f0 [ 34.522107] ? sch_direct_xmit+0x142/0xf30 [ 34.522595] ? virtqueue_napi_schedule+0x26/0x30 [ 34.523155] net_rx_action+0x2f6/0xc50 [ 34.523601] ? napi_complete_done+0x2f0/0x2f0 [ 34.524126] ? kasan_check_read+0x11/0x20 [ 34.524608] ? _raw_spin_lock+0x7d/0xd0 [ 34.525070] ? _raw_spin_lock_bh+0xd0/0xd0 [ 34.525563] ? kvm_guest_apic_eoi_write+0x6b/0x80 [ 34.526130] ? apic_ack_irq+0x9e/0xe0 [ 34.526567] __do_softirq+0x188/0x4b5 [ 34.527015] irq_exit+0x151/0x180 [ 34.527417] do_IRQ+0xdb/0x150 [ 34.527783] common_interrupt+0xf/0xf [ 34.528223] </IRQ> This patch makes sure that skb->prev is set to NULL when entering netem_enqueue. Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Fixes: 68d2f84a ("net: gro: properly remove skb from list") Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Reviewed-by:
-
