- 26 Jul, 2010 40 commits
-
-
git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: MIPS: Set io_map_base for several PCI bridges lacking it MIPS: Alchemy: Define eth platform devices in the correct order MIPS: BCM63xx: Prevent second enet registration on BCM6338 MIPS: Quit using undefined behavior of ADDU in 64-bit atomic operations. MIPS: N32: Define getdents64. MIPS: MTX-1: Fix PCI on the MeshCube and related boards MIPS: Make init_vdso a subsys_initcall. MIPS: "Fix" useless 'init_vdso successfully' message. MIPS: PowerTV: Move register setup to before reading registers. SOUND: Au1000: Fix section mismatch VIDEO: Au1100fb: Fix section mismatch VIDEO: PMAGB-B: Fix section mismatch VIDEO: PMAG-BA: Fix section mismatch NET: declance: Fix section mismatches VIDEO. gbefb: Fix section mismatches.
-
Jesse Barnes authored
Fix error from the last pull request. Making sure we shut the panel off is more correct and saves power. Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: sysfs: allow creating symlinks from untagged to tagged directories sysfs: sysfs_delete_link handle symlinks from untagged to tagged directories. sysfs: Don't allow the creation of symlinks we can't remove
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: musb: tusb6010: fix compile error with n8x0_defconfig USB: FTDI: Add support for the RT System VX-7 radio programming cable USB: add quirk for Broadcom BT dongle USB: usb-storage: fix initializations of urb fields USB: xhci: Set Mult field in endpoint context correctly. USB: sisusbvga: Fix for USB 3.0 USB: adds Artisman USB dongle to list of quirky devices USB: xhci: Set EP0 dequeue ptr after reset of configured device. USB: Fix USB3.0 Port Speed Downgrade after port reset USB: xHCI: Fix another bug in link TRB activation change. USB: option: Add support for AMOI Skypephone S2 USB: New PIDs for Qualcomm gobi 2000 (qcserial) USB: ftdi_sio: support for Signalyzer tools based on FTDI chips USB: s3c2410_udc: be aware of connected gadget driver USB: Expose vendor-specific ACM channel on Nokia 5230 USB: Add PID for Sierra 250U to drivers/usb/serial/sierra.c USB: option: add support for 1da5:4518
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: fix rs485 for atmel_serial on avr32
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intelLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: add pipe A force quirks to i915 driver drm/i915: Fix panel fitting regression since 734b4157 drm/i915: fix deadlock in fb teardown drm/i915: don't free non-existent compressed llb on ILK+ agp/intel: Use the correct mask to detect i830 aperture size. drm/i915: disable FBC when more than one pipe is active drm/i915: Use the correct scanout alignment for fbcon. drm/i915: make sure eDP panel is turned on drm/i915: add PANEL_UNLOCK_REGS definition drm/i915: Make G4X-style PLL search more permissive drm/i915: Clear any existing dither mode prior to enabling spatial dithering drm/i915: handle shared framebuffers when flipping drm/i915: Explosion following OOM in do_execbuffer. gpu/drm/i915: Add a blacklist to omit modeset on LID open
-
Eric W. Biederman authored
Supporting symlinks from untagged to tagged directories is reasonable, and needed to support CONFIG_SYSFS_DEPRECATED. So don't fail a prior allowing that case to work. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Eric W. Biederman authored
This happens for network devices when SYSFS_DEPRECATED is enabled. Signed-off-by:
-
Eric W. Biederman authored
Recently my tagged sysfs support revealed a flaw in the device core that a few rare drivers are running into such that we don't always put network devices in a class subdirectory named net/. Since we are not creating the class directory the network devices wind up in a non-tagged directory, but the symlinks to the network devices from /sys/class/net are in a tagged directory. All of which works until we go to remove or rename the symlink. When we remove or rename a symlink we look in the namespace of the target of the symlink. Since the target of the symlink is in a non-tagged sysfs directory we don't have a namespace to look in, and we fail to remove the symlink. Detect this problem up front and simply don't create symlinks we won't be able to remove later. This prevents symlink leakage and fails in a much clearer and more understandable way. Signed-off-by:
-
Felipe Balbi authored
Drop the unnecessary empty stubs in tusb6010.c and avoid a compile error when building kernel for n8x0. Signed-off-by:
Felipe Balbi <felipe.balbi@nokia.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Corey Minyard authored
RT Systems has put out bunch of ham radio cables based on the FT232RL chip. Each cable type has a unique PID, this adds one for the Yaesu VX-7 radios. Signed-off-by:
Corey Minyard <minyard@acm.org> Cc: stable <stable@kernel.org> Signed-off-by:
-
Oliver Neukum authored
This device needs to be reset when resuming Signed-off-by:
Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Signed-off-by:
-
Bob Copeland authored
Commit 0ede76fc, "USB: remove uses of URB_NO_SETUP_DMA_MAP" introduced a regression by inadvertantly removing initialization of the transfer flags. This caused initialization failures in the ums-karma driver. Fix the regression by zeroing it. While at it, as Alan Stern points out, the initializers for actual_length and status are handled by the core and error_count only matters for isochronous urbs, so they don't need to be set here. Remove them. Signed-off-by:
Bob Copeland <me@bobcopeland.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Sarah Sharp authored
The bmAttributes field of the SuperSpeed Endpoint Companion Descriptor has different meanings, depending on the endpoint type. If the endpoint is isochronous, the bmAttributes field is the maximum number of packets within a service interval that this endpoint supports. If the endpoint is bulk, it's the number of stream IDs this endpoint supports. Only set the Mult field of the xHCI endpoint context using the bmAttributes field if the endpoint is isochronous, and the device is a SuperSpeed device. Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Oliver Neukum authored
Super speed is also fast enough to let sisusbvga operate. Therefor expand the checks. Signed-off-by:
-
Paul Mortier authored
When an attempt is made to read the interface strings of the Artisman Watchdog USB dongle (idVendor:idProduct 04b4:0526) an error is written to the dmesg log (uhci_result_common: failed with status 440000) and the dongle resets itself, resulting in a disconnect/reconnect loop. Adding the dongle to the list of devices in quirks.c, with the same quirk Alan Stern's previous patch for the Saitek Cyborg Gold 3D joystick, stops the device from resetting and allows it to be used with no problems. Signed-off-by:
Paul Mortier <mortier@btinternet.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Sarah Sharp authored
When a configured device is reset, the control endpoint's ring is reused. If control transfers to the device were issued before the device is reset, the dequeue pointer will be somewhere in the middle of the ring. If the device is then issued an address with the set address command, the xHCI driver must provide a valid input context for control endpoint zero. The original code would give the hardware the original input context, which had a dequeue pointer set to the top of the ring. This would cause the host to re-execute any control transfers until it reached the ring's enqueue pointer. When issuing a set address command for a device that has just been configured and then reset, use the control endpoint's enqueue pointer as the hardware's dequeue pointer. Assumption: All control transfers will be completed or cancelled before the set address command is issued to the device. If there are any outstanding control transfers, this code will not work. Signed-off-by:
-
Sarah Sharp authored
Without this fix, a USB 3.0 port is downgraded to full speed after a port reset of a configured device. The USB 3.0 terminations will be disabled permanently, and USB 3.0 devices will always enumerate as full speed devices, until the host controller is unplugged (if it is an ExpressCard) or the computer is rebooted. Fajun Chen traced this traced the speed downgrade issue to the port reset and the interpretation of port status in USB hub driver code. The hub code was not testing for the port being a SuperSpeed port, and it fell through to the else case of Full Speed. The following patch adds SuperSpeed mapping from the port status, and fixes the speed downgrade issue. Reported-by:
Fajun Chen <fajun.chen@seagate.com> Signed-off-by:
-
Sarah Sharp authored
Commit 6c12db90 also seems to have introduced a bug that is triggered when the command ring is about to wrap. The inc_enq() function will not have moved the enqueue pointer past the link TRB. It is supposed to be moved past the link TRB in prepare_ring(), which should be called before a TD is enqueued. However, the queue_command() function never calls the prepare_ring() function because prepare_ring() is only supposed to be used for endpoint rings. That means the enqueue pointer will not be moved past the link TRB, and will get overwritten. The fix is to make queue_command() call prepare_ring() with a fake endpoint status (set to running). Then the enqueue pointer will get moved past the link TRB. Signed-off-by:
-
Dennis Jansen authored
usbserial: Add AMOI Skypephone S2 support. This patch adds support for the AMOI Skypephone S2 to the usbserial module. Tested-by:
Dennis Jansen <Dennis.Jansen@web.de> Signed-off-by:
-
Andrew Bird authored
Adds support for the Generic Qualcomm Gobi 2000 WWAN UMTS/CDMA modem Signed-off-by:
Andrew Bird <ajb@spheresytems.co.uk> Signed-off-by:
-
Colin Leitner authored
ftdi_sio: support for Signalyzer tools based on FTDI chips This patch adds support for the Xverve Signalyzers. Signed-off-by:
Colin Leitner <colin.leitner@googlemail.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Vladimir Zapolskiy authored
To escape from data abort in interrupt handler, it is required to check for a connected gadget before delivering control requests. The change fixes the following panic, which occurs with no loaded gadget driver and input USB_REQ_GET_DESCRIPTOR request: Kernel panic - not syncing: Fatal exception in interrupt [<c0025874>] (unwind_backtrace+0x0/0xd8) from [<c0253f14>] (panic+0x40/0x110) [<c0253f14>] (panic+0x40/0x110) from [<c002470c>] (die+0x154/0x180) [<c002470c>] (die+0x154/0x180) from [<c0026448>] (__do_kernel_fault+0x64/0x74) [<c0026448>] (__do_kernel_fault+0x64/0x74) from [<c0026610>] (do_page_fault+0x1b8/0x1cc) [<c0026610>] (do_page_fault+0x1b8/0x1cc) from [<c00202d4>] (do_DataAbort+0x34/0x94) [<c00202d4>] (do_DataAbort+0x34/0x94) from [<c0020a60>] (__dabt_svc+0x40/0x60) Exception stack(0xc0327ea8 to 0xc0327ef0) 7ea0: bf0026b0 c0327ef0 c0327ee4 00000000 bf002590 00000093 7ec0: 00000001 bf0026b0 bf002990 00000000 00000008 0000143d 00003f00 c0327ef0 7ee0: bf001364 bf001360 20000093 ffffffff [<c0020a60>] (__dabt_svc+0x40/0x60) from [<bf001360>] (s3c2410_udc_irq+0x5b8/0x778 [s3c2410_udc]) [<bf001360>] (s3c2410_udc_irq+0x5b8/0x778 [s3c2410_udc]) from [<c0058aa0>] (handle_IRQ_event+0x3c/0x104) [<c0058aa0>] (handle_IRQ_event+0x3c/0x104) from [<c005a428>] (handle_edge_irq+0x12c/0x164) [<c005a428>] (handle_edge_irq+0x12c/0x164) from [<c0020068>] (asm_do_IRQ+0x68/0x88) [<c0020068>] (asm_do_IRQ+0x68/0x88) from [<c0020aa4>] (__irq_svc+0x24/0xa0) Signed-off-by:
Vladimir Zapolskiy <vzapolskiy@gmail.com> Signed-off-by:
-
Przemo Firszt authored
Nokia S60 phones expose two ACM channels. The first is a modem, the second is 'vendor-specific' but is treated as a serial device at the S60 end, so we want to expose it on Linux too. Signed-off-by:
Przemo Firszt <przemo@firszt.eu> Signed-off-by:
-
august huber authored
Add VID/PID for Sierra Wireless 250U USB dongle to sierra.c Allows use of 3G radio only Signed-off-by:
August Huber <gus@pbx.org> Cc: Elina Pasheva <epasheva@sierrawireless.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Ömer Sezgin Ugurlu authored
Signed-off-by:
Omer Sezgin Ugurlu <omer.ugurlu@a-kent.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Jesse Barnes authored
Ported over from the old UMS list. Unfortunately they're still necessary especially on older laptop platforms. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=22126. Tested-by:
Xavier <shiningxc@gmail.com> Tested-by:
Diego Escalante Urrelo <diegoe@gnome.org> Signed-off-by:
Eric Anholt <eric@anholt.net>
-
Chris Wilson authored
The crtc mode fixup is run after the encoders adjust the mode to fit on their output, so don't reset the mode! Fixes: Bug 29057 - display corruption under 800x600 on netbook (1024x600) with 'Full Aspect' scaling https://bugs.freedesktop.org/show_bug.cgi?id=29057Signed-off-by:Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by:
Xun Fang <xunx.fang@intel.com> Signed-off-by:
-
Peter Huewe authored
This patch fixes a build failure [1-4] in the atmel_serial code introduced by patch the patch ARM: 6092/1: atmel_serial: support for RS485 communications (e8faff73) The build failure was caused by missing struct field and missing defines for the avr32 board - the patch fixes this. [1] http://kisskb.ellerman.id.au/kisskb/buildresult/2575242/ - first failure in linux-next, may 11th [2] http://kisskb.ellerman.id.au/kisskb/buildresult/2816418/ - still exists as of today [3] http://kisskb.ellerman.id.au/kisskb/buildresult/2617511/ - first failure in Linus' tree - May 20th - did really no one notice this?! [4] http://kisskb.ellerman.id.au/kisskb/buildresult/2813956/ - still exists in Linus' tree as of today Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Jesse Barnes authored
At module unload time we'll tear down the fbdev state. We do so under the struct mutex, so we shouldn't try to use the unlocked variant of the GEM object unreference function or we may deadlock. Signed-off-by:
-
Jesse Barnes authored
We should only free the compressed llb if we allocated it in the first place otherwise we'll panic at unload time. Signed-off-by:
-
Tim Gardner authored
BugLink: https://bugs.launchpad.net/bugs/597075 commit f1befe71 introduced a regression when detecting aperture size of some i915 adapters, e.g., those on the Intel Q35 chipset. The original report: https://bugzilla.kernel.org/show_bug.cgi?id=15733 The regression report: https://bugzilla.kernel.org/show_bug.cgi?id=16294 According to the specification found at http://intellinuxgraphics.org/VOL_1_graphics_core.pdf, the PCI config space register I830_GMCH_CTRL is a mirror of GMCH Graphics Control. The correct macro for isolating the aperture size bits is therefore I830_GMCH_GMS_MASK along with the attendant changes to the case statement. Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Tested-by:
Kees Cook <kees.cook@canonical.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Eric Anholt <eric@anholt.net> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Jesse Barnes authored
We're really supposed to do this to avoid trouble with underflows when multiple planes are active. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=26987. Signed-off-by:
-
Chris Wilson authored
This fixes a potential modesetting error during boot with plymouth on Broadwater and Crestline introduced with 9df47c. The framebuffer was hard-coding an alignment of 64K, but the modesetting code required the documented alignment of 128K. The result was that we would attempt to unbind the pinned fbcon buffer, triggering an ERROR and ultimately failing the mode change. Signed-off-by:
-
Jesse Barnes authored
When enabling the eDP port, we need to make sure the panel is turned on after training the link. If we don't, it likely won't come back after suspend or may not come up at all. For unknown reasons, unlocking the panel regs before initiating a power on sequence is necessary. There are known bugs in the PCH panel sequencing logic, apparently this is one possible workaround. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28739. Signed-off-by:
"Paulo J. S. Silva" <pjssilva@gmail.com> Signed-off-by:
-
Jesse Barnes authored
In some cases, unlocking the panel regs is safe and can help us avoid a flickery, full mode set sequence. So define the unlock key and use it. Signed-off-by:
-
Adam Jackson authored
Fixes an Ironlake laptop with a 68.940MHz 1280x800 panel and 120MHz SSC reference clock. More generally, the 0.488% tolerance used before is just too tight to reliably find a PLL setting. I extracted the search algorithm and modified it to find the dot clocks with maximum error over the valid range for the given output type: http://people.freedesktop.org/~ajax/intel_g4x_find_best_pll.c This gave: Worst dotclock for Ironlake DAC refclk is 350000kHz (error 0.00571) Worst dotclock for Ironlake SL-LVDS refclk is 102321kHz (error 0.00524) Worst dotclock for Ironlake DL-LVDS refclk is 219642kHz (error 0.00488) Worst dotclock for Ironlake SL-LVDS SSC refclk is 84374kHz (error 0.00529) Worst dotclock for Ironlake DL-LVDS SSC refclk is 183035kHz (error 0.00488) Worst dotclock for G4X SDVO refclk is 267600kHz (error 0.00448) Worst dotclock for G4X HDMI refclk is 334400kHz (error 0.00478) Worst dotclock for G4X SL-LVDS refclk is 95571kHz (error 0.00449) Worst dotclock for G4X DL-LVDS refclk is 224000kHz (error 0.00510) Signed-off-by:
Adam Jackson <ajax@redhat.com> Cc: stable@kernel.org Signed-off-by:
-
Ben Hutchings authored
Several MIPS platforms don't set pci_controller::io_map_base for their PCI bridges. This results in a panic in pci_iomap(). (The panic is conditional on CONFIG_PCI_DOMAINS, but that is now enabled for all PCI MIPS systems.) Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: linux-mips@linux-mips.org Cc: Martin Michlmayr <tbm@cyrius.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: 584784@bugs.debian.org Patchwork: https://patchwork.linux-mips.org/patch/1377/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Wolfgang Grandegger authored
Currently, the eth devices are probed in the inverse order, first au1xxx_eth1_device and then au1xxx_eth0_device. On the GPR board, this makes trouble: # ifconfig|grep HWaddr eth0 Link encap:Ethernet HWaddr 00:50:C2:0C:30:01 eth1 Link encap:Ethernet HWaddr 66:22:01:80:38:10 A bogous ethernet hwaddr is assigned to the first device and au1xxx_eth0_device is mapped to eth1, which even does not work properly. With this patch, the problems are gone: # ifconfig|grep HWaddr eth0 Link encap:Ethernet HWaddr 66:22:11:32:38:10 eth1 Link encap:Ethernet HWaddr 66:22:11:32:38:11 Signed-off-by:
Wolfgang Grandegger <wg@denx.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1473/Signed-off-by:
-
Florian Fainelli authored
This SoC has only one ethernet MAC, so prevent registration of a second one. Signed-off-by:
Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1482/Signed-off-by:
-
