- 31 Jan, 2015 1 commit
-
-
Haixia Shi authored
The run-length encoding algorithm should compare 16-bit encoded pixel values instead of comparing raw pixel values. It allows pixels with similar but different colors to be encoded as repeat pixels, and thus potentially save USB bandwidth. Signed-off-by:
Haixia Shi <hshi@chromium.org> Reviewed-by:
Daniel Kurtz <djkurtz@chromium.org> Tested-by:
Dave Airlie <airlied@gmail.com>
-
- 29 Jan, 2015 3 commits
-
-
Wang, Yalin authored
Change agp_free_page_array to use kvfree function, remove the duplicated code. Signed-off-by:
Yalin Wang <yalin.wang@sonymobile.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxDave Airlie authored
This backmerges drm-fixes into drm-next mainly for the amdkfd stuff, I'm not 100% confident, but it builds and the amdkfd folks can fix anything up. Signed-off-by: -
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/panel: Changes for v3.20-rc1 This contains the long-awaited drm_bridge series that makes Chromebooks work for people. I had thought this would've been perfect by now, but then I go and build test it and the first thing it does is yell about a recursive dependency. I fixed that up because I was feeling bad for not getting around to look at this earlier. Biseds that there is new support for two more panels, a couple of fixup patches to the Sharp LQ101R1SX01 dual-channel DSI panel driver and a potential NULL pointer dereference fix. * tag 'drm/panel/for-3.20-rc1' of git://anongit.freedesktop.org/tegra/linux: (23 commits) drm/bridge: dw-hdmi: Adapt to bridge API change drm/sti: fixup for bridge interface drm/bridge: dw-hdmi: Fix return error path drm: Check the right variable when setting formats Documentation: bridge: Add documentation for ps8622 DT properties Documentation: devicetree: Add vendor prefix for parade Documentation: drm: bridge: move to video/bridge drm/bridge: ptn3460: use gpiod interface drm/bridge: ptn3460: probe connector at the end of bridge attach drm/bridge: ptn3460: support drm_panel drm/exynos: dp: support drm_bridge drm/bridge: ptn3460: Convert to I2C driver model drm/bridge: make bridge registration independent of drm flow drm/bridge: do not pass drm_bridge_funcs to drm_bridge_init drm/bridge: ptn3460: Few trivial cleanups drm/panel: simple: Add AVIC TM070DDH03 panel support of: Add vendor prefix for Shanghai AVIC Optoelectronics Co., Ltd. drm/panel: sharp: lq101r1sx01: Remove unneeded include drm/panel: sharp: lq101r1sx01: Respect power timings drm/panel: sharp: lq101r1sx01: Add delay after display on ...
-
- 28 Jan, 2015 24 commits
-
-
Fabio Estevam authored
Commit fbc4572e9c48e45b ("drm/bridge: make bridge registration independent of drm flow") introduced some drm/bridge API modifications. Make the necessary changes so that we can avoid the build breakage: drivers/gpu/drm/bridge/dw_hdmi.c: In function 'dw_hdmi_bridge_destroy': drivers/gpu/drm/bridge/dw_hdmi.c:1378:2: error: implicit declaration of function 'drm_bridge_cleanup' [-Werror=implicit-function-declaration] drivers/gpu/drm/bridge/dw_hdmi.c: At top level: drivers/gpu/drm/bridge/dw_hdmi.c:1471:2: error: unknown field 'destroy' specified in initializer drivers/gpu/drm/bridge/dw_hdmi.c: In function 'dw_hdmi_register': drivers/gpu/drm/bridge/dw_hdmi.c:1535:2: error: implicit declaration of function 'drm_bridge_init' [-Werror=implicit-function-declaration] Signed-off-by:Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Dave Airlie authored
So sti doesn't build because the bridge interfaces changes didn't catch up to its new DVO driver. Now I might just carry this patch, but I might just push the bridge pull into a side-pull until someone resolves it. So this might not be the right solution to the problem, so please figure it out and let me know ASAP. Signed-off-by:
-
Fabio Estevam authored
If devm_request_threaded_irq() fails we should jump to 'err_iahb' label that will disable the clocks that were previously enabled. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Dan Carpenter authored
When setting the video bus supported formats for a display device using drm_display_info_set_bus_formats(), check for the proper variable after duplicating memory. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Ajay Kumar authored
Add documentation for DT properties supported by ps8622/ps8625 eDP-LVDS converter. Signed-off-by:
Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by:
Inki Dae <inki.dae@samsung.com> Tested-by:
Rahul Sharma <rahul.sharma@samsung.com> Tested-by:
Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by:
Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by:
-
Ajay Kumar authored
ps8622 eDP-LVDS converter bridge chip is from parade technologies Signed-off-by:
-
Ajay Kumar authored
Move drm/bridge documentation to video/bridge. Also, add proper documentation for gpios used by ptn3460. Signed-off-by:
-
Ajay Kumar authored
Modify driver to support gpiod interface. Signed-off-by:
-
Ajay Kumar authored
Force bridge connector detection at the end of the bridge attach. This is needed to detect the bridge connector early. Signed-off-by:
-
Ajay Kumar authored
Add drm_panel calls to the driver to make the panel and bridge work together in tandem. Signed-off-by:
-
Ajay Kumar authored
Modify driver to support drm_bridge. Signed-off-by:
-
Ajay Kumar authored
Use drm_bridge helpers to modify the driver to support I2C driver model. Signed-off-by:
-
Ajay Kumar authored
Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by:
-
Ajay Kumar authored
Assign the pointer to bridge ops structure(drm_bridge_funcs) in the bridge driver itself, instead of passing it to drm_bridge_init. This will allow bridge driver developer to pack bridge private information inside the bridge object and pass only the drm-relevant information to drm_bridge_init. Signed-off-by:
-
Ajay Kumar authored
This patch does the following changes: -- Use usleep_range instead of udelay. -- Remove driver_private member from ptn3460 structure. -- Make all possible functions and structures static. -- Use dev_err for non-DRM errors. -- Arrange header files alphabetically. -- s/edid/EDID in all error messages. Signed-off-by:
-
Philipp Zabel authored
The Shanghai AVIC Optoelectronics TM070DDH03 is a 7" 1024x600 TFT LCD panel connecting to a 24-bit RGB LVDS interface. Signed-off-by:
-
Philipp Zabel authored
Shanghai AVIC Optoelectronics Co., Ltd. is a subsidiary of Tianma Microelectronics Co., Ltd. and designs and manufactures TFT LCDs. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Thierry Reding authored
Nothing in the file needs symbols from include/linux/host1x.h, so remove the include. Signed-off-by: -
Thierry Reding authored
Before shutting down the display using the DCS display_off command, wait for 4 frames according to the datasheet. Furthermore, after enabling the power supply, the supply voltage needs around 10 ms to settle. After that, another 120 ms is required before a DCS exit_sleep_mode command can be sent. While at it, no longer send the DCS soft_reset command. This is totally unnecessary because we've just powered up the display, hence it will be in a reset state already. Signed-off-by: -
Thierry Reding authored
After switching the display on (using the DCS display_on command), wait for 6 frames (100ms at 60 Hz) to give the display more time to prepare. Failing to do this results in the panel not initializing properly in a large number of cases. Signed-off-by: -
Philipp Zabel authored
This patch adds support for the GiantPlus GPG48273QS5 4.3" WQVGA TFT LCD panel to the simple-panel driver. This panel is connected via a parallel bus and uses both HSYNC and VSYNC, whose lengths are unfortunately not clearly defined. The datasheet only specifies the front- and backporch length, but the timing diagram suggests that both sync signals should be asserted for exactly one clock cycle. Signed-off-by:
Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
Signed-off-by:
-
Thierry Reding authored
The mipi_dsi_packet_create() function dereferences the msg pointer before checking that it's valid. Move the dereference down to where it is required to avoid potentially dereferencing a NULL pointer. Reported-by:
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "This feels larger than I'd like but its for three reasons. a) amdkfd finalising the API more, this is a new feature introduced last merge window, and I'd prefer to make the tweaks to the API before it first gets into a stable release. b) radeon regression required splitting an internal API to fix properly, so it just changed a few more lines c) vmwgfx fix changes a lock from a mutex->spin lock, this is fallout from the new sleep checking. Otherwise there is just some tda998x fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: Remove rdev->gart.pages_addr array drm/radeon: Restore GART table contents after pinning it in VRAM v3 drm/radeon: Split off gart_get_page_entry ASIC hook from set_page_entry drm/amdkfd: Fix bug in call to init_pipelines() drm/amdkfd: Fix bug in pipelines initialization drm/radeon: Don't increment pipe_id in kgd_init_pipeline drm/i2c: tda998x: set the CEC I2C address based on the slave I2C address drm/vmwgfx: Replace the hw mutex with a hw spinlock drm/amdkfd: Allow user to limit only queues per device drm/amdkfd: PQM handle queue creation fault drm: tda998x: Fix EDID read timeout on HDMI connect drm: tda998x: Protect the page register
-
- 27 Jan, 2015 12 commits
-
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
* tag 'topic/atomic-core-2015-01-27' of git://anongit.freedesktop.org/drm-intel: drm/atomic: Fix potential use of state after free drm/atomic-helper: debug output for modesets drm/atomic-helpers: Saner encoder/crtc callbacks drm/atomic-helpers: Recover full cursor plane behaviour drm/atomic-helper: add connector->dpms() implementation drm/atomic: Add drm_crtc_state->active drm: Add standardized boolean props drm/plane-helper: Fix transitional helper kerneldocs drm/plane-helper: Skip prepare_fb/cleanup_fb when newfb==oldfb Conflicts: include/drm/drm_crtc_helper.h
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/tegra: Changes for v3.20-rc1 The biggest part of these changes is the conversion to atomic mode- setting. A lot of cleanup and demidlayering was required before the conversion, with the result being a whole lot of changes. Besides the atomic mode-setting support, the host1x bus now has the proper infrastructure to support suspend/resume for child devices. Finally, a couple of smaller cleanup patches round things off. * tag 'drm/tegra/for-3.20-rc1' of git://anongit.freedesktop.org/tegra/linux: (54 commits) drm/tegra: Use correct relocation target offsets drm/tegra: Add minimal power management drm/tegra: dc: Unify enabling the display controller drm/tegra: Track tiling and format in plane state drm/tegra: Track active planes in CRTC state drm/tegra: Remove unused ->mode_fixup() callbacks drm/tegra: Atomic conversion, phase 3, step 3 drm/tegra: Atomic conversion, phase 3, step 2 drm/tegra: dc: Use atomic clock state in modeset drm/tegra: sor: Implement ->atomic_check() drm/tegra: hdmi: Implement ->atomic_check() drm/tegra: dsi: Implement ->atomic_check() drm/tegra: rgb: Implement ->atomic_check() drm/tegra: dc: Store clock setup in atomic state drm/tegra: Atomic conversion, phase 3, step 1 drm/tegra: Atomic conversion, phase 2 drm/tegra: Atomic conversion, phase 1 drm/tegra: dc: Do not needlessly deassert reset drm/tegra: Output cleanup functions cannot fail drm/tegra: Remove remnants of the output midlayer ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't OOPS on socket AIO, from Christoph Hellwig. 2) Scheduled scans should be aborted upon RFKILL, from Emmanuel Grumbach. 3) Fix sleep in atomic context in kvaser_usb, from Ahmed S Darwish. 4) Fix RCU locking across copy_to_user() in bpf code, from Alexei Starovoitov. 5) Lots of crash, memory leak, short TX packet et al bug fixes in sh_eth from Ben Hutchings. 6) Fix memory corruption in SCTP wrt. INIT collitions, from Daniel Borkmann. 7) Fix return value logic for poll handlers in netxen, enic, and bnx2x. From Eric Dumazet and Govindarajulu Varadarajan. 8) Header length calculation fix in mac80211 from Fred Chou. 9) mv643xx_eth doesn't handle highmem correctly in non-TSO code paths. From Ezequiel Garcia. 10) udp_diag has bogus logic in it's hash chain skipping, copy same fix tcp diag used. From Herbert Xu. 11) amd-xgbe programs wrong rx flow control register, from Thomas Lendacky. 12) Fix race leading to use after free in ping receive path, from Subash Abhinov Kasiviswanathan. 13) Cache redirect routes otherwise we can get a heavy backlog of rcu jobs liberating DST_NOCACHE entries. From Hannes Frederic Sowa. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits) net: don't OOPS on socket aio stmmac: prevent probe drivers to crash kernel bnx2x: fix napi poll return value for repoll ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos too sh_eth: Fix DMA-API usage for RX buffers sh_eth: Check for DMA mapping errors on transmit sh_eth: Ensure DMA engines are stopped before freeing buffers sh_eth: Remove RX overflow log messages ping: Fix race in free in receive path udp_diag: Fix socket skipping within chain can: kvaser_usb: Fix state handling upon BUS_ERROR events can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT can: kvaser_usb: Send correct context to URB completion can: kvaser_usb: Do not sleep in atomic context ipv4: try to cache dst_entries which would cause a redirect samples: bpf: relax test_maps check bpf: rcu lock must not be held when calling copy_to_user() net: sctp: fix slab corruption from use after free on INIT collisions net: mv643xx_eth: Fix highmem support in non-TSO egress path sh_eth: Fix serialisation of interrupt disable with interrupt & NAPI handlers ... -
Christoph Hellwig authored
Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andy Shevchenko authored
In the case when alloc_netdev fails we return NULL to a caller. But there is no check for NULL in the probe drivers. This patch changes NULL to an error pointer. The function description is amended to reflect what we may get returned. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Two powerpc fixes" * tag 'powerpc-3.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Restore LPCR with LPCR_PECE1 cleared powerpc/xmon: Fix another endiannes issue in RTAS call from xmon
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linuxLinus Torvalds authored
Pull one more module fix from Rusty Russell: "SCSI was using module_refcount() to figure out when the module was unloading: this broke with new atomic refcounting. The code is still suspicious, but this solves the WARN_ON()" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: scsi: always increment reference count
-
David Ung authored
When copying a relocation from userspace, copy the correct target offset. Signed-off-by:
David Ung <davidu@nvidia.com> Fixes: 961e3bea ("drm/tegra: Make job submission 64-bit safe") Cc: stable@vger.kernel.org [treding@nvidia.com: provide a better commit message] Signed-off-by:
-
Thierry Reding authored
For now only disable the KMS hotplug polling helper logic upon suspend and re-enable it on resume. Reviewed-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
Mark Zhang <markz@nvidia.com> Signed-off-by:
-
Thierry Reding authored
Previously output drivers would enable continuous display mode and power up the display controller at various points during the initialization. This is suboptimal because it accesses display controller registers in output drivers and duplicates a bit of code. Move this code into the display controller driver and enable the display controller as the final step of the ->mode_set_nofb() implementation. Signed-off-by: -
Thierry Reding authored
Tracking these in the plane state allows them to be computed in the ->atomic_check() callback and reused when applying the configuration in ->atomic_update(). Signed-off-by: -
Thierry Reding authored
Wrap struct drm_crtc_state in a driver-specific structure and add the planes field which keeps track of which planes are updated or disabled during a modeset. This allows atomic updates of the the display engine at ->atomic_flush() time. v2: open-code getting the state of the CRTC that the plane is being attached to (Daniel Vetter) Signed-off-by:
-
