- 04 Jun, 2018 1 commit
-
-
Mark Brown authored
-
- 25 May, 2018 2 commits
-
-
Srinivas Kandagatla authored
As per SLIMBus specs Value Elements and Information Elements address map ranges from 0x000 - 0xFFF. So allow register addresses up to 16 bits Fixes: 7d6f7fb0 ("regmap: add SLIMbus support") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
For some reason the devm variant of slimbus init is not added into the header eventhough this __devm_regmap_init_slimbus() is an exported function. This patch adds this. This also fixes below warning in regmap-slimbus.c regmap-slimbus.c:65:15: warning: symbol '__devm_regmap_init_slimbus' was not declared. Should it be static? regmap-slimbus.c:65:16: warning: no previous prototype for '__devm_regmap_init_slimbus' [-Wmissing-prototypes] Fixes: 7d6f7fb0 ("regmap: add SLIMbus support") Signed-off-by:
-
- 17 May, 2018 1 commit
-
-
James Kelly authored
Capability to attach an existing clk to a MMIO regmap was introduced in 4.17rc1. However, when using attached clk, regmap does not do the clk_get. Therefore it should not do the clk_put when freeing the MMIO regmap context. There does not appear to be any users of attached clocks yet so this would be a good time to make this change before anything depends on the existing behaviour. Signed-off-by:
James Kelly <jamespeterkelly@gmail.com> Acked-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
- 24 Apr, 2018 1 commit
-
-
Sean Wang authored
Similar to the readx_poll_timeout() macro calling ktime_* and using ktime_t type, which is declared in <linux/ktime.h>. So, make include/linux/regmap.h explicitly include <linux/ktime.h>, like include/linux/iopoll.h does. Otherwise, users of the macro will see below errors. error: implicit declaration of function ‘ktime_add_us’ [-Werror=implicit-function-declaration] error: implicit declaration of function ‘ktime_get’ [-Werror=implicit-function-declaration] error: implicit declaration of function ‘ktime_compare’ [-Werror=implicit-function-declaration] include/linux/regmap.h:128:2: error: unknown type name ‘ktime_t’ ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \ Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
- 12 Apr, 2018 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio update from Michael Tsirkin: "This adds reporting hugepage stats to virtio-balloon" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_balloon: export hugetlb page allocation counts
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU updates from Joerg Roedel: - OF_IOMMU support for the Rockchip iommu driver so that it can use generic DT bindings - rework of locking in the AMD IOMMU interrupt remapping code to make it work better in RT kernels - support for improved iotlb flushing in the AMD IOMMU driver - support for 52-bit physical and virtual addressing in the ARM-SMMU - various other small fixes and cleanups * tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (53 commits) iommu/io-pgtable-arm: Avoid warning with 32-bit phys_addr_t iommu/rockchip: Support sharing IOMMU between masters iommu/rockchip: Add runtime PM support iommu/rockchip: Fix error handling in init iommu/rockchip: Use OF_IOMMU to attach devices automatically iommu/rockchip: Use IOMMU device for dma mapping operations dt-bindings: iommu/rockchip: Add clock property iommu/rockchip: Control clocks needed to access the IOMMU iommu/rockchip: Fix TLB flush of secondary IOMMUs iommu/rockchip: Use iopoll helpers to wait for hardware iommu/rockchip: Fix error handling in attach iommu/rockchip: Request irqs in rk_iommu_probe() iommu/rockchip: Fix error handling in probe iommu/rockchip: Prohibit unbind and remove iommu/amd: Return proper error code in irq_remapping_alloc() iommu/amd: Make amd_iommu_devtable_lock a spin_lock iommu/amd: Drop the lock while allocating new irq remap table iommu/amd: Factor out setting the remap table for a devid iommu/amd: Use `table' instead `irt' as variable name in amd_iommu_update_ga() iommu/amd: Remove the special case from alloc_irq_table() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more power management updates from Rafael Wysocki: "These include one big-ticket item which is the rework of the idle loop in order to prevent CPUs from spending too much time in shallow idle states. It reduces idle power on some systems by 10% or more and may improve performance of workloads in which the idle loop overhead matters. This has been in the works for several weeks and it has been tested and reviewed quite thoroughly. Also included are changes that finalize the cpufreq cleanup moving frequency table validation from drivers to the core, a few fixes and cleanups of cpufreq drivers, a cpuidle documentation update and a PM QoS core update to mark the expected switch fall-throughs in it. Specifics: - Rework the idle loop in order to prevent CPUs from spending too much time in shallow idle states by making it stop the scheduler tick before putting the CPU into an idle state only if the idle duration predicted by the idle governor is long enough. That required the code to be reordered to invoke the idle governor before stopping the tick, among other things (Rafael Wysocki, Frederic Weisbecker, Arnd Bergmann). - Add the missing description of the residency sysfs attribute to the cpuidle documentation (Prashanth Prakash). - Finalize the cpufreq cleanup moving frequency table validation from drivers to the core (Viresh Kumar). - Fix a clock leak regression in the armada-37xx cpufreq driver (Gregory Clement). - Fix the initialization of the CPU performance data structures for shared policies in the CPPC cpufreq driver (Shunyong Yang). - Clean up the ti-cpufreq, intel_pstate and CPPC cpufreq drivers a bit (Viresh Kumar, Rafael Wysocki). - Mark the expected switch fall-throughs in the PM QoS core (Gustavo Silva)" * tag 'pm-4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) tick-sched: avoid a maybe-uninitialized warning cpufreq: Drop cpufreq_table_validate_and_show() cpufreq: SCMI: Don't validate the frequency table twice cpufreq: CPPC: Initialize shared perf capabilities of CPUs cpufreq: armada-37xx: Fix clock leak cpufreq: CPPC: Don't set transition_latency cpufreq: ti-cpufreq: Use builtin_platform_driver() cpufreq: intel_pstate: Do not include debugfs.h PM / QoS: mark expected switch fall-throughs cpuidle: Add definition of residency to sysfs documentation time: hrtimer: Use timerqueue_iterate_next() to get to the next timer nohz: Avoid duplication of code related to got_idle_tick nohz: Gather tick_sched booleans under a common flag field cpuidle: menu: Avoid selecting shallow states with stopped tick cpuidle: menu: Refine idle state selection for running tick sched: idle: Select idle state before stopping the tick time: hrtimer: Introduce hrtimer_next_event_without() time: tick-sched: Split tick_nohz_stop_sched_tick() cpuidle: Return nohz hint from cpuidle_select() jiffies: Introduce USER_TICK_USEC and redefine TICK_USEC ...
-
- 11 Apr, 2018 32 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktestLinus Torvalds authored
Pull ktest updates from Steven Rostedt: "These commits have either been sitting in my INBOX or have been in my local tree for some time. I need to push them upstream: - Separate out config-bisect.pl from ktest.pl. This allows users to do config bisects without full ktest setup. - Email on status change. Allow the user to be emailed on test start, finish, failure, etc. - Other small fixes and enhancements" * tag 'ktest-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: (24 commits) ktest: Take submenu into account for grub2 menus ktest.pl: Add MAIL_COMMAND option to define how to send email ktest.pl: Use run_command to execute sending mail ktest.pl: Allow dodie be recursive ktest.pl: Kill test if mailer is not supported ktest.pl: Add MAIL_PATH option to define where to find the mailer ktest.pl: No need to print no mailer is specified when mailto is not Ktest: add email options to sample.config Ktest: Use dodie for critical falures Ktest: Add SigInt handling Ktest: Add email support ktest.pl: Detect if a config-bisect was interrupted ktest.pl: Make finding config-bisect.pl dynamic ktest.pl: Have ktest.pl pass -r to config-bisect.pl to reset bisect ktest.pl: Use diffconfig if available for failed config bisects ktest.pl: Allow for the config-bisect.pl output to display to console ktest: Use config-bisect.pl in ktest.pl ktest: Add standalone config-bisect.pl program ktest: Set do_not_reboot=y for CONFIG_BISECT_TYPE=build ktest: Set buildonly=1 for CONFIG_BISECT_TYPE=build ... -
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBI and UBIFS updates from Richard Weinberger: "Minor bug fixes and improvements" * tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifs: ubi: Reject MLC NAND ubifs: Remove useless parameter of lpt_heap_replace ubifs: Constify struct ubifs_lprops in scan_for_leb_for_idx ubifs: remove unnecessary assignment ubi: Fix error for write access ubi: fastmap: Don't flush fastmap work on detach ubifs: Check ubifs_wbuf_sync() return code
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML updates from Richard Weinberger: - a new and faster epoll based IRQ controller and NIC driver - misc fixes and janitorial updates * git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: Fix vector raw inintialization logic Migrate vector timers to new timer API um: Compile with modern headers um: vector: Fix an error handling path in 'vector_parse()' um: vector: Fix a memory allocation check um: vector: fix missing unlock on error in vector_net_open() um: Add missing EXPORT for free_irq_by_fd() High Performance UML Vector Network Driver Epoll based IRQ controller um: Use POSIX ucontext_t instead of struct ucontext um: time: Use timespec64 for persistent clock um: Restore symbol versions for __memcpy and memcpy
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "Here is a very small set of fixes for inclusion in linux-4.17-rc1: Two changes for the maintainer file, and one more fix for the newly added npcm platform, to enable the level 2 cache controller" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Update ASPEED entry with details MAINTAINERS: Migrate oxnas list to groups.io arm: npcm: enable L2 cache in NPCM7xx architecture
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds authored
Pull nios2 update from Ley Foon Tan: "Use read_persistent_clock64() instead of read_persistent_clock()" * tag 'nios2-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: Use read_persistent_clock64() instead of read_persistent_clock()
-
Linus Torvalds authored
Merge more updates from Andrew Morton: - almost all of the rest of MM - kasan updates - lots of procfs work - misc things - lib/ updates - checkpatch - rapidio - ipc/shm updates - the start of willy's XArray conversion * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (140 commits) page cache: use xa_lock xarray: add the xa_lock to the radix_tree_root fscache: use appropriate radix tree accessors export __set_page_dirty unicore32: turn flush_dcache_mmap_lock into a no-op arm64: turn flush_dcache_mmap_lock into a no-op mac80211_hwsim: use DEFINE_IDA radix tree: use GFP_ZONEMASK bits of gfp_t for flags linux/const.h: refactor _BITUL and _BITULL a bit linux/const.h: move UL() macro to include/linux/const.h linux/const.h: prefix include guard of uapi/linux/const.h with _UAPI xen, mm: allow deferred page initialization for xen pv domains elf: enforce MAP_FIXED on overlaying elf segments fs, elf: drop MAP_FIXED usage from elf_map mm: introduce MAP_FIXED_NOREPLACE MAINTAINERS: update bouncing aacraid@adaptec.com addresses fs/dcache.c: add cond_resched() in shrink_dentry_list() include/linux/kfifo.h: fix comment ipc/shm.c: shm_split(): remove unneeded test for NULL shm_file_data.vm_ops kernel/sysctl.c: add kdoc comments to do_proc_do{u}intvec_minmax_conv_param ... -
Matthew Wilcox authored
Remove the address_space ->tree_lock and use the xa_lock newly added to the radix_tree_root. Rename the address_space ->page_tree to ->i_pages, since we don't really care that it's a tree. [willy@infradead.org: fix nds32, fs/dax.c] Link: http://lkml.kernel.org/r/20180406145415.GB20605@bombadil.infradead.orgLink: http://lkml.kernel.org/r/20180313132639.17387-9-willy@infradead.orgSigned-off-by:
Matthew Wilcox <mawilcox@microsoft.com> Acked-by:
Jeff Layton <jlayton@redhat.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Matthew Wilcox authored
This results in no change in structure size on 64-bit machines as it fits in the padding between the gfp_t and the void *. 32-bit machines will grow the structure from 8 to 12 bytes. Almost all radix trees are protected with (at least) a spinlock, so as they are converted from radix trees to xarrays, the data structures will shrink again. Initialising the spinlock requires a name for the benefit of lockdep, so RADIX_TREE_INIT() now needs to know the name of the radix tree it's initialising, and so do IDR_INIT() and IDA_INIT(). Also add the xa_lock() and xa_unlock() family of wrappers to make it easier to use the lock. If we could rely on -fplan9-extensions in the compiler, we could avoid all of this syntactic sugar, but that wasn't added until gcc 4.6. Link: http://lkml.kernel.org/r/20180313132639.17387-8-willy@infradead.orgSigned-off-by:
Jeff Layton <jlayton@kernel.org> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Matthew Wilcox authored
Don't open-code accesses to data structure internals. Link: http://lkml.kernel.org/r/20180313132639.17387-7-willy@infradead.orgSigned-off-by:
-
Matthew Wilcox authored
XFS currently contains a copy-and-paste of __set_page_dirty(). Export it from buffer.c instead. Link: http://lkml.kernel.org/r/20180313132639.17387-6-willy@infradead.orgSigned-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Dave Chinner <david@fromorbit.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Matthew Wilcox authored
Unicore doesn't walk the VMA tree in its flush_dcache_page() implementation, so has no need to take the tree_lock. Link: http://lkml.kernel.org/r/20180313132639.17387-5-willy@infradead.orgSigned-off-by:
-
Matthew Wilcox authored
ARM64 doesn't walk the VMA tree in its flush_dcache_page() implementation, so has no need to take the tree_lock. Link: http://lkml.kernel.org/r/20180313132639.17387-4-willy@infradead.orgSigned-off-by:
Will Deacon <will.deacon@arm.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
-
Matthew Wilcox authored
This is preferred to opencoding an IDA_INIT. Link: http://lkml.kernel.org/r/20180313132639.17387-2-willy@infradead.orgSigned-off-by:
-
Matthew Wilcox authored
Patch series "XArray", v9. (First part thereof). This patchset is, I believe, appropriate for merging for 4.17. It contains the XArray implementation, to eventually replace the radix tree, and converts the page cache to use it. This conversion keeps the radix tree and XArray data structures in sync at all times. That allows us to convert the page cache one function at a time and should allow for easier bisection. Other than renaming some elements of the structures, the data structures are fundamentally unchanged; a radix tree walk and an XArray walk will touch the same number of cachelines. I have changes planned to the XArray data structure, but those will happen in future patches. Improvements the XArray has over the radix tree: - The radix tree provides operations like other trees do; 'insert' and 'delete'. But what most users really want is an automatically resizing array, and so it makes more sense to give users an API that is like an array -- 'load' and 'store'. We still have an 'insert' operation for users that really want that semantic. - The XArray considers locking as part of its API. This simplifies a lot of users who formerly had to manage their own locking just for the radix tree. It also improves code generation as we can now tell RCU that we're holding a lock and it doesn't need to generate as much fencing code. The other advantage is that tree nodes can be moved (not yet implemented). - GFP flags are now parameters to calls which may need to allocate memory. The radix tree forced users to decide what the allocation flags would be at creation time. It's much clearer to specify them at allocation time. - Memory is not preloaded; we don't tie up dozens of pages on the off chance that the slab allocator fails. Instead, we drop the lock, allocate a new node and retry the operation. We have to convert all the radix tree, IDA and IDR preload users before we can realise this benefit, but I have not yet found a user which cannot be converted. - The XArray provides a cmpxchg operation. The radix tree forces users to roll their own (and at least four have). - Iterators take a 'max' parameter. That simplifies many users and will reduce the amount of iteration done. - Iteration can proceed backwards. We only have one user for this, but since it's called as part of the pagefault readahead algorithm, that seemed worth mentioning. - RCU-protected pointers are not exposed as part of the API. There are some fun bugs where the page cache forgets to use rcu_dereference() in the current codebase. - Value entries gain an extra bit compared to radix tree exceptional entries. That gives us the extra bit we need to put huge page swap entries in the page cache. - Some iterators now take a 'filter' argument instead of having separate iterators for tagged/untagged iterations. The page cache is improved by this: - Shorter, easier to read code - More efficient iterations - Reduction in size of struct address_space - Fewer walks from the top of the data structure; the XArray API encourages staying at the leaf node and conducting operations there. This patch (of 8): None of these bits may be used for slab allocations, so we can use them as radix tree flags as long as we mask them off before passing them to the slab allocator. Move the IDR flag from the high bits to the GFP_ZONEMASK bits. Link: http://lkml.kernel.org/r/20180313132639.17387-3-willy@infradead.orgSigned-off-by:
-
Masahiro Yamada authored
Minor cleanups available by _UL and _ULL. Link: http://lkml.kernel.org/r/1519301715-31798-5-git-send-email-yamada.masahiro@socionext.comSigned-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Masahiro Yamada authored
ARM, ARM64 and UniCore32 duplicate the definition of UL(): #define UL(x) _AC(x, UL) This is not actually arch-specific, so it will be useful to move it to a common header. Currently, we only have the uapi variant for linux/const.h, so I am creating include/linux/const.h. I also added _UL(), _ULL() and ULL() because _AC() is mostly used in the form either _AC(..., UL) or _AC(..., ULL). I expect they will be replaced in follow-up cleanups. The underscore-prefixed ones should be used for exported headers. Link: http://lkml.kernel.org/r/1519301715-31798-4-git-send-email-yamada.masahiro@socionext.comSigned-off-by:
Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Russell King <rmk+kernel@armlinux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Masahiro Yamada authored
Patch series "linux/const.h: cleanups of macros such as UL(), _BITUL(), BIT() etc", v3. ARM, ARM64, UniCore32 define UL() as a shorthand of _AC(..., UL). More architectures may introduce it in the future. UL() is arch-agnostic, and useful. So let's move it to include/linux/const.h Currently, <asm/memory.h> must be included to use UL(). It pulls in more bloats just for defining some bit macros. I posted V2 one year ago. The previous posts are: https://patchwork.kernel.org/patch/9498273/ https://patchwork.kernel.org/patch/9498275/ https://patchwork.kernel.org/patch/9498269/ https://patchwork.kernel.org/patch/9498271/ At that time, what blocked this series was a comment from David Howells: You need to be very careful doing this. Some userspace stuff depends on the guard macro names on the kernel header files. (https://patchwork.kernel.org/patch/9498275/) Looking at the code closer, I noticed this is not a problem. See the following line. https://github.com/torvalds/linux/blob/v4.16-rc2/scripts/headers_install.sh#L40 scripts/headers_install.sh rips off _UAPI prefix from guard macro names. I ran "make headers_install" and confirmed the result is what I expect. So, we can prefix the include guard of include/uapi/linux/const.h, and add a new include/linux/const.h. This patch (of 4): I am going to add include/linux/const.h for the kernel space. Add _UAPI to the include guard of include/uapi/linux/const.h to prepare for that. Please notice the guard name of the exported one will be kept as-is. So, this commit has no impact to the userspace even if some userspace stuff depends on the guard macro names. scripts/headers_install.sh processes exported headers by SED, and rips off "_UAPI" from guard macro names. #ifndef _UAPI_LINUX_CONST_H #define _UAPI_LINUX_CONST_H will be turned into #ifndef _LINUX_CONST_H #define _LINUX_CONST_H Link: http://lkml.kernel.org/r/1519301715-31798-2-git-send-email-yamada.masahiro@socionext.comSigned-off-by:
-
Pavel Tatashin authored
Juergen Gross noticed that commit f7f99100 ("mm: stop zeroing memory during allocation in vmemmap") broke XEN PV domains when deferred struct page initialization is enabled. This is because the xen's PagePinned() flag is getting erased from struct pages when they are initialized later in boot. Juergen fixed this problem by disabling deferred pages on xen pv domains. It is desirable, however, to have this feature available as it reduces boot time. This fix re-enables the feature for pv-dmains, and fixes the problem the following way: The fix is to delay setting PagePinned flag until struct pages for all allocated memory are initialized, i.e. until after free_all_bootmem(). A new x86_init.hyper op init_after_bootmem() is called to let xen know that boot allocator is done, and hence struct pages for all the allocated memory are now initialized. If deferred page initialization is enabled, the rest of struct pages are going to be initialized later in boot once page_alloc_init_late() is called. xen_after_bootmem() walks page table's pages and marks them pinned. Link: http://lkml.kernel.org/r/20180226160112.24724-2-pasha.tatashin@oracle.comSigned-off-by:
Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Reviewed-by:
Juergen Gross <jgross@suse.com> Tested-by:
-
Michal Hocko authored
Anshuman has reported that with "fs, elf: drop MAP_FIXED usage from elf_map" applied, some ELF binaries in his environment fail to start with [ 23.423642] 9148 (sed): Uhuuh, elf segment at 0000000010030000 requested but the memory is mapped already [ 23.423706] requested [10030000, 10040000] mapped [10030000, 10040000] 100073 anon The reason is that the above binary has overlapping elf segments: LOAD 0x0000000000000000 0x0000000010000000 0x0000000010000000 0x0000000000013a8c 0x0000000000013a8c R E 10000 LOAD 0x000000000001fd40 0x000000001002fd40 0x000000001002fd40 0x00000000000002c0 0x00000000000005e8 RW 10000 LOAD 0x0000000000020328 0x0000000010030328 0x0000000010030328 0x0000000000000384 0x00000000000094a0 RW 10000 That binary has two RW LOAD segments, the first crosses a page border into the second 0x1002fd40 (LOAD2-vaddr) + 0x5e8 (LOAD2-memlen) == 0x10030328 (LOAD3-vaddr) Handle this situation by enforcing MAP_FIXED when we establish a temporary brk VMA to handle overlapping segments. All other mappings will still use MAP_FIXED_NOREPLACE. Link: http://lkml.kernel.org/r/20180213100440.GM3443@dhcp22.suse.czSigned-off-by:Michal Hocko <mhocko@suse.com> Reported-by:
Anshuman Khandual <khandual@linux.vnet.ibm.com> Reviewed-by:
Khalid Aziz <khalid.aziz@oracle.com> Cc: Andrei Vagin <avagin@openvz.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Kees Cook <keescook@chromium.org> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Joel Stanley <joel@jms.id.au> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Mark Brown <broonie@kernel.org> Signed-off-by:
-
Michal Hocko authored
Both load_elf_interp and load_elf_binary rely on elf_map to map segments on a controlled address and they use MAP_FIXED to enforce that. This is however dangerous thing prone to silent data corruption which can be even exploitable. Let's take CVE-2017-1000253 as an example. At the time (before commit eab09532: "binfmt_elf: use ELF_ET_DYN_BASE only for PIE") ELF_ET_DYN_BASE was at TASK_SIZE / 3 * 2 which is not that far away from the stack top on 32b (legacy) memory layout (only 1GB away). Therefore we could end up mapping over the existing stack with some luck. The issue has been fixed since then (a87938b2: "fs/binfmt_elf.c: fix bug in loading of PIE binaries"), ELF_ET_DYN_BASE moved moved much further from the stack (eab09532 and later by c715b72c: "mm: revert x86_64 and arm64 ELF_ET_DYN_BASE base changes") and excessive stack consumption early during execve fully stopped by da029c11 ("exec: Limit arg stack to at most 75% of _STK_LIM"). So we should be safe and any attack should be impractical. On the other hand this is just too subtle assumption so it can break quite easily and hard to spot. I believe that the MAP_FIXED usage in load_elf_binary (et. al) is still fundamentally dangerous. Moreover it shouldn't be even needed. We are at the early process stage and so there shouldn't be unrelated mappings (except for stack and loader) existing so mmap for a given address should succeed even without MAP_FIXED. Something is terribly wrong if this is not the case and we should rather fail than silently corrupt the underlying mapping. Address this issue by changing MAP_FIXED to the newly added MAP_FIXED_NOREPLACE. This will mean that mmap will fail if there is an existing mapping clashing with the requested one without clobbering it. [mhocko@suse.com: fix build] [akpm@linux-foundation.org: coding-style fixes] [avagin@openvz.org: don't use the same value for MAP_FIXED_NOREPLACE and MAP_SYNC] Link: http://lkml.kernel.org/r/20171218184916.24445-1-avagin@openvz.org Link: http://lkml.kernel.org/r/20171213092550.2774-3-mhocko@kernel.orgSigned-off-by:
Andrei Vagin <avagin@openvz.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Joel Stanley <joel@jms.id.au> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by:
-
Michal Hocko authored
Patch series "mm: introduce MAP_FIXED_NOREPLACE", v2. This has started as a follow up discussion [3][4] resulting in the runtime failure caused by hardening patch [5] which removes MAP_FIXED from the elf loader because MAP_FIXED is inherently dangerous as it might silently clobber an existing underlying mapping (e.g. stack). The reason for the failure is that some architectures enforce an alignment for the given address hint without MAP_FIXED used (e.g. for shared or file backed mappings). One way around this would be excluding those archs which do alignment tricks from the hardening [6]. The patch is really trivial but it has been objected, rightfully so, that this screams for a more generic solution. We basically want a non-destructive MAP_FIXED. The first patch introduced MAP_FIXED_NOREPLACE which enforces the given address but unlike MAP_FIXED it fails with EEXIST if the given range conflicts with an existing one. The flag is introduced as a completely new one rather than a MAP_FIXED extension because of the backward compatibility. We really want a never-clobber semantic even on older kernels which do not recognize the flag. Unfortunately mmap sucks wrt flags evaluation because we do not EINVAL on unknown flags. On those kernels we would simply use the traditional hint based semantic so the caller can still get a different address (which sucks) but at least not silently corrupt an existing mapping. I do not see a good way around that. Except we won't export expose the new semantic to the userspace at all. It seems there are users who would like to have something like that. Jemalloc has been mentioned by Michael Ellerman [7] Florian Weimer has mentioned the following: : glibc ld.so currently maps DSOs without hints. This means that the kernel : will map right next to each other, and the offsets between them a completely : predictable. We would like to change that and supply a random address in a : window of the address space. If there is a conflict, we do not want the : kernel to pick a non-random address. Instead, we would try again with a : random address. John Hubbard has mentioned CUDA example : a) Searches /proc/<pid>/maps for a "suitable" region of available : VA space. "Suitable" generally means it has to have a base address : within a certain limited range (a particular device model might : have odd limitations, for example), it has to be large enough, and : alignment has to be large enough (again, various devices may have : constraints that lead us to do this). : : This is of course subject to races with other threads in the process. : : Let's say it finds a region starting at va. : : b) Next it does: : p = mmap(va, ...) : : *without* setting MAP_FIXED, of course (so va is just a hint), to : attempt to safely reserve that region. If p != va, then in most cases, : this is a failure (almost certainly due to another thread getting a : mapping from that region before we did), and so this layer now has to : call munmap(), before returning a "failure: retry" to upper layers. : : IMPROVEMENT: --> if instead, we could call this: : : p = mmap(va, ... MAP_FIXED_NOREPLACE ...) : : , then we could skip the munmap() call upon failure. This : is a small thing, but it is useful here. (Thanks to Piotr : Jaroszynski and Mark Hairgrove for helping me get that detail : exactly right, btw.) : : c) After that, CUDA suballocates from p, via: : : q = mmap(sub_region_start, ... MAP_FIXED ...) : : Interestingly enough, "freeing" is also done via MAP_FIXED, and : setting PROT_NONE to the subregion. Anyway, I just included (c) for : general interest. Atomic address range probing in the multithreaded programs in general sounds like an interesting thing to me. The second patch simply replaces MAP_FIXED use in elf loader by MAP_FIXED_NOREPLACE. I believe other places which rely on MAP_FIXED should follow. Actually real MAP_FIXED usages should be docummented properly and they should be more of an exception. [1] http://lkml.kernel.org/r/20171116101900.13621-1-mhocko@kernel.org [2] http://lkml.kernel.org/r/20171129144219.22867-1-mhocko@kernel.org [3] http://lkml.kernel.org/r/20171107162217.382cd754@canb.auug.org.au [4] http://lkml.kernel.org/r/1510048229.12079.7.camel@abdul.in.ibm.com [5] http://lkml.kernel.org/r/20171023082608.6167-1-mhocko@kernel.org [6] http://lkml.kernel.org/r/20171113094203.aofz2e7kueitk55y@dhcp22.suse.cz [7] http://lkml.kernel.org/r/87efp1w7vy.fsf@concordia.ellerman.id.au This patch (of 2): MAP_FIXED is used quite often to enforce mapping at the particular range. The main problem of this flag is, however, that it is inherently dangerous because it unmaps existing mappings covered by the requested range. This can cause silent memory corruptions. Some of them even with serious security implications. While the current semantic might be really desiderable in many cases there are others which would want to enforce the given range but rather see a failure than a silent memory corruption on a clashing range. Please note that there is no guarantee that a given range is obeyed by the mmap even when it is free - e.g. arch specific code is allowed to apply an alignment. Introduce a new MAP_FIXED_NOREPLACE flag for mmap to achieve this behavior. It has the same semantic as MAP_FIXED wrt. the given address request with a single exception that it fails with EEXIST if the requested address is already covered by an existing mapping. We still do rely on get_unmaped_area to handle all the arch specific MAP_FIXED treatment and check for a conflicting vma after it returns. The flag is introduced as a completely new one rather than a MAP_FIXED extension because of the backward compatibility. We really want a never-clobber semantic even on older kernels which do not recognize the flag. Unfortunately mmap sucks wrt. flags evaluation because we do not EINVAL on unknown flags. On those kernels we would simply use the traditional hint based semantic so the caller can still get a different address (which sucks) but at least not silently corrupt an existing mapping. I do not see a good way around that. [mpe@ellerman.id.au: fix whitespace] [fail on clashing range with EEXIST as per Florian Weimer] [set MAP_FIXED before round_hint_to_min as per Khalid Aziz] Link: http://lkml.kernel.org/r/20171213092550.2774-2-mhocko@kernel.orgReviewed-by:
-
Joe Perches authored
Adaptec is now part of Microsemi. Commit 2a81ffdd ("MAINTAINERS: Update email address for aacraid") updated only one of the driver maintainer addresses. Update the other two sections as the aacraid@adaptec.com address bounces. Link: http://lkml.kernel.org/r/1522103936.12357.27.camel@perches.comSigned-off-by:
Joe Perches <joe@perches.com> Cc: Dave Carroll <david.carroll@microsemi.com> Signed-off-by:
-
Nikolay Borisov authored
As previously reported (https://patchwork.kernel.org/patch/8642031/) it's possible to call shrink_dentry_list with a large number of dentries (> 10000). This, in turn, could trigger the softlockup detector and possibly trigger a panic. In addition to the unmount path being vulnerable to this scenario, at SuSE we've observed similar situation happening during process exit on processes that touch a lot of dentries. Here is an excerpt from a crash dump. The number after the colon are the number of dentries on the list passed to shrink_dentry_list: PID 99760: 10722 PID 107530: 215 PID 108809: 24134 PID 108877: 21331 PID 141708: 16487 So we want to kill between 15k-25k dentries without yielding. And one possible call stack looks like: 4 [ffff8839ece41db0] _raw_spin_lock at ffffffff8152a5f8 5 [ffff8839ece41db0] evict at ffffffff811c3026 6 [ffff8839ece41dd0] __dentry_kill at ffffffff811bf258 7 [ffff8839ece41df0] shrink_dentry_list at ffffffff811bf593 8 [ffff8839ece41e18] shrink_dcache_parent at ffffffff811bf830 9 [ffff8839ece41e50] proc_flush_task at ffffffff8120dd61 10 [ffff8839ece41ec0] release_task at ffffffff81059ebd 11 [ffff8839ece41f08] do_exit at ffffffff8105b8ce 12 [ffff8839ece41f78] sys_exit at ffffffff8105bd53 13 [ffff8839ece41f80] system_call_fastpath at ffffffff81532909 While some of the callers of shrink_dentry_list do use cond_resched, this is not sufficient to prevent softlockups. So just move cond_resched into shrink_dentry_list from its callers. David said: I've found hundreds of occurrences of warnings that we emit when need_resched stays set for a prolonged period of time with the stack trace that is included in the change log. Link: http://lkml.kernel.org/r/1521718946-31521-1-git-send-email-nborisov@suse.comSigned-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
David Rientjes <rientjes@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Goldwyn Rodrigues <rgoldwyn@suse.de> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by:
-
Valentin Vidic authored
Clean up unusual formatting in the note about locking. Link: http://lkml.kernel.org/r/20180324002630.13046-1-Valentin.Vidic@CARNet.hrSigned-off-by:
Valentin Vidic <Valentin.Vidic@CARNet.hr> Cc: Stefani Seibold <stefani@seibold.net> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Sean Young <sean@mess.org> Signed-off-by:
-
Andrew Morton authored
This was added by the recent "ipc/shm.c: add split function to shm_vm_ops", but it is not necessary. Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
Waiman Long authored
Kdoc comments are added to the do_proc_dointvec_minmax_conv_param and do_proc_douintvec_minmax_conv_param structures thare are used internally for range checking. The error codes returned by proc_dointvec_minmax() and proc_douintvec_minmax() are also documented. Link: http://lkml.kernel.org/r/1519926220-7453-3-git-send-email-longman@redhat.comSigned-off-by:
Waiman Long <longman@redhat.com> Reviewed-by:
Luis R. Rodriguez <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Kees Cook <keescook@chromium.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Waiman Long authored
Patch series "ipc: Clamp *mni to the real IPCMNI limit", v3. The sysctl parameters msgmni, shmmni and semmni have an inherent limit of IPC_MNI (32k). However, users may not be aware of that because they can write a value much higher than that without getting any error or notification. Reading the parameters back will show the newly written values which are not real. Enforcing the limit by failing sysctl parameter write, however, can break existing user applications. To address this delemma, a new flags field is introduced into the ctl_table. The value CTL_FLAGS_CLAMP_RANGE can be added to any ctl_table entries to enable a looser range clamping without returning any error. For example, .flags = CTL_FLAGS_CLAMP_RANGE, This flags value are now used for the range checking of shmmni, msgmni and semmni without breaking existing applications. If any out of range value is written to those sysctl parameters, the following warning will be printed instead. Kernel parameter "shmmni" was set out of range [0, 32768], clamped to 32768. Reading the values back will show 32768 instead of some fake values. This patch (of 6): Fix a typo. Link: http://lkml.kernel.org/r/1519926220-7453-2-git-send-email-longman@redhat.comSigned-off-by:
-
Davidlohr Bueso authored
There is a permission discrepancy when consulting msq ipc object metadata between /proc/sysvipc/msg (0444) and the MSG_STAT shmctl command. The later does permission checks for the object vs S_IRUGO. As such there can be cases where EACCESS is returned via syscall but the info is displayed anyways in the procfs files. While this might have security implications via info leaking (albeit no writing to the msq metadata), this behavior goes way back and showing all the objects regardless of the permissions was most likely an overlook - so we are stuck with it. Furthermore, modifying either the syscall or the procfs file can cause userspace programs to break (ie ipcs). Some applications require getting the procfs info (without root privileges) and can be rather slow in comparison with a syscall -- up to 500x in some reported cases for shm. This patch introduces a new MSG_STAT_ANY command such that the msq ipc object permissions are ignored, and only audited instead. In addition, I've left the lsm security hook checks in place, as if some policy can block the call, then the user has no other choice than just parsing the procfs file. Link: http://lkml.kernel.org/r/20180215162458.10059-4-dave@stgolabs.netSigned-off-by:
Davidlohr Bueso <dbueso@suse.de> Reported-by:
Robert Kettler <robert.kettler@outlook.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by:
-
Davidlohr Bueso authored
There is a permission discrepancy when consulting shm ipc object metadata between /proc/sysvipc/sem (0444) and the SEM_STAT semctl command. The later does permission checks for the object vs S_IRUGO. As such there can be cases where EACCESS is returned via syscall but the info is displayed anyways in the procfs files. While this might have security implications via info leaking (albeit no writing to the sma metadata), this behavior goes way back and showing all the objects regardless of the permissions was most likely an overlook - so we are stuck with it. Furthermore, modifying either the syscall or the procfs file can cause userspace programs to break (ie ipcs). Some applications require getting the procfs info (without root privileges) and can be rather slow in comparison with a syscall -- up to 500x in some reported cases for shm. This patch introduces a new SEM_STAT_ANY command such that the sem ipc object permissions are ignored, and only audited instead. In addition, I've left the lsm security hook checks in place, as if some policy can block the call, then the user has no other choice than just parsing the procfs file. Link: http://lkml.kernel.org/r/20180215162458.10059-3-dave@stgolabs.netSigned-off-by:
-
Davidlohr Bueso authored
Patch series "sysvipc: introduce STAT_ANY commands", v2. The following patches adds the discussed (see [1]) new command for shm as well as for sems and msq as they are subject to the same discrepancies for ipc object permission checks between the syscall and via procfs. These new commands are justified in that (1) we are stuck with this semantics as changing syscall and procfs can break userland; and (2) some users can benefit from performance (for large amounts of shm segments, for example) from not having to parse the procfs interface. Once merged, I will submit the necesary manpage updates. But I'm thinking something like: : diff --git a/man2/shmctl.2 b/man2/shmctl.2 : index 7bb503999941..bb00bbe21a57 100644 : --- a/man2/shmctl.2 : +++ b/man2/shmctl.2 : @@ -41,6 +41,7 @@ : .\" 2005-04-25, mtk -- noted aberrant Linux behavior w.r.t. new : .\" attaches to a segment that has already been marked for deletion. : .\" 2005-08-02, mtk: Added IPC_INFO, SHM_INFO, SHM_STAT descriptions. : +.\" 2018-02-13, dbueso: Added SHM_STAT_ANY description. : .\" : .TH SHMCTL 2 2017-09-15 "Linux" "Linux Programmer's Manual" : .SH NAME : @@ -242,6 +243,18 @@ However, the : argument is not a segment identifier, but instead an index into : the kernel's internal array that maintains information about : all shared memory segments on the system. : +.TP : +.BR SHM_STAT_ANY " (Linux-specific)" : +Return a : +.I shmid_ds : +structure as for : +.BR SHM_STAT . : +However, the : +.I shm_perm.mode : +is not checked for read access for : +.IR shmid , : +resembing the behaviour of : +/proc/sysvipc/shm. : .PP : The caller can prevent or allow swapping of a shared : memory segment with the following \fIcmd\fP values: : @@ -287,7 +300,7 @@ operation returns the index of the highest used entry in the : kernel's internal array recording information about all : shared memory segments. : (This information can be used with repeated : -.B SHM_STAT : +.B SHM_STAT/SHM_STAT_ANY : operations to obtain information about all shared memory segments : on the system.) : A successful : @@ -328,7 +341,7 @@ isn't accessible. : \fIshmid\fP is not a valid identifier, or \fIcmd\fP : is not a valid command. : Or: for a : -.B SHM_STAT : +.B SHM_STAT/SHM_STAT_ANY : operation, the index value specified in : .I shmid : referred to an array slot that is currently unused. This patch (of 3): There is a permission discrepancy when consulting shm ipc object metadata between /proc/sysvipc/shm (0444) and the SHM_STAT shmctl command. The later does permission checks for the object vs S_IRUGO. As such there can be cases where EACCESS is returned via syscall but the info is displayed anyways in the procfs files. While this might have security implications via info leaking (albeit no writing to the shm metadata), this behavior goes way back and showing all the objects regardless of the permissions was most likely an overlook - so we are stuck with it. Furthermore, modifying either the syscall or the procfs file can cause userspace programs to break (ie ipcs). Some applications require getting the procfs info (without root privileges) and can be rather slow in comparison with a syscall -- up to 500x in some reported cases. This patch introduces a new SHM_STAT_ANY command such that the shm ipc object permissions are ignored, and only audited instead. In addition, I've left the lsm security hook checks in place, as if some policy can block the call, then the user has no other choice than just parsing the procfs file. [1] https://lkml.org/lkml/2017/12/19/220 Link: http://lkml.kernel.org/r/20180215162458.10059-2-dave@stgolabs.netSigned-off-by:
-
Chris Wilson authored
As using an unsafe module parameter is, by its very definition, an expected user action, emitting a warning is overkill. Nothing has yet gone wrong, and we add a taint flag for any future oops should something actually go wrong. So instead of having a user controllable pr_warn, downgrade it to a pr_notice for "a normal, but significant condition". We make use of unsafe kernel parameters in igt (https://cgit.freedesktop.org/drm/igt-gpu-tools/) (we have not yet succeeded in removing all such debugging options), which generates a warning and taints the kernel. The warning is unhelpful as we then need to filter it out again as we check that every test themselves do not provoke any kernel warnings. Link: http://lkml.kernel.org/r/20180226151919.9674-1-chris@chris-wilson.co.uk Fixes: 91f9d330 ("module: make it possible to have unsafe, tainting module params") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Randy Dunlap authored
Fix sizeof argument to be the same as the data variable name. Probably a copy/paste error. Mostly harmless since both variables are unsigned int. Fixes kernel bugzilla #197371: Possible access to unintended variable in "kernel/sysctl.c" line 1339 https://bugzilla.kernel.org/show_bug.cgi?id=197371 Link: http://lkml.kernel.org/r/e0d0531f-361e-ef5f-8499-32743ba907e1@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
Petru Mihancea <petrum@gmail.com> Signed-off-by:
-
