The driver doesn't support scaling, but when an atomic test is done
it repeatedly spits out this warning which isn't particularly useful.

So just remove the error message.

Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1529622076-20386-1-git-send-email-john.stultz@linaro.org

Make ioctl wrappers for functions that will be used by the in-kernel API.
The following functions are touched:
- drm_mode_create_dumb_ioctl()
- drm_mode_destroy_dumb_ioctl()
- drm_mode_addfb()
- drm_mode_rmfb()
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618141739.48151-4-noralf@tronnes.org

It only makes sense for userspace clients.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618141739.48151-3-noralf@tronnes.org

Rather than doing drm_file allocation/destruction right in the fops, lets
provide separate helpers. This decouples drm_file management from the
still-mandatory drm-fops. It prepares for use of drm_file without the
fops, both by possible separate fops implementations and APIs (not that I
am aware of any such plans), and more importantly from in-kernel use where
no real file is available.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618141739.48151-2-noralf@tronnes.org

Drivers such as vc4 don't initialize mode_config.funcs until later in
initialization, but we know they're atomic since they've got the flag
set.  This avoids oopsing on dereferencing funcs in the new atomic
methods sanity checks.

I moved the atomic check function down below the core flag check, to
avoid needing a prototype.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: ba1f665f ("drm: Add checks for atomic_[duplicate/destroy]_state with atomic drivers")
Link: https://patchwork.freedesktop.org/patch/msgid/20180621195428.17447-1-eric@anholt.netReviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Some functions are unused after removal of the kmap_atomic
DMA-buf interface.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: f664a526 ("dma-buf: remove kmap_atomic interface")
Link: https://patchwork.freedesktop.org/series/45245/

Since our seqno value comes from a counter associated with the GPU
ring, not the entity (aka client), they'll be completed out of order.
There's actually no need for this code at all, since we don't have
enable_signaling() and thus DMA_FENCE_SIGNALED_BIT will be set before
we could be called.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180605190302.18279-2-eric@anholt.netReviewed-by: Lucas Stach <l.stach@pengutronix.de>

Between creation and queueing of a job, you need to prevent any other
job from being created and queued.  Otherwise the scheduler's fences
may be signaled out of seqno order.

v2: move mutex unlock to the error label.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 57692c94 ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Link: https://patchwork.freedesktop.org/patch/msgid/20180606174851.12433-1-eric@anholt.netReviewed-by: Lucas Stach <l.stach@pengutronix.de>

This makes it more likely that the docs stay updated with the code.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180606190431.1833-1-eric@anholt.netReviewed-by: Andrzej Hajda <a.hajda@samsung.com>

Use new return type vm_fault_t for fault handler.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>

The meaning of the mode_config max_width/height fields has not been
entirely clear. They are used both as the max framebuffer dimensions,
and they are also used by drm_mode_getconnector() to filter out
any mode whose hdisplay/vdisplay exceed those limits.

Let's put it in writing that max_width/height only refrer to the max
framebuffer dimensions, and should those be higher than the hardware
limits for display timings the driver must validate the latter using
some other means.

We'll keep the max_width/height usage in drm_mode_getconnector()
because setcrtc treats hdisplay/vdisplay also as the primary plane
width, and having a plane bigger than the max fb size doesn't make
much sense (if we ignore scaling that is). It all works out fine
as long as the max fb dimensions are at least equal to the max
timing limits. If the opposite were true we may want to rethink
what drm_mode_getconnector() does. Maybe do the mode filtering
only for non-atomic userspace?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615173939.11353-1-ville.syrjala@linux.intel.comReviewed-by: Manasi Navare <manasi.d.navare@intel.com>

Fixup for "dma_buf: remove device parameter from attach callback v2".

I missed this driver, sorry for the noise. Patch is not even compile
tested.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/230641/

Fix i915's CI build after the removal of the dmabuf->kmap interface that
left the mock routines intact.

In file included from drivers/gpu/drm/i915/i915_gem_dmabuf.c:335:0:
drivers/gpu/drm/i915/selftests/mock_dmabuf.c:104:13: error: ‘mock_dmabuf_kunmap_atomic’ defined but not used [-Werror=unused-function]
 static void mock_dmabuf_kunmap_atomic(struct dma_buf *dma_buf, unsigned long page_num, void *addr)
drivers/gpu/drm/i915/selftests/mock_dmabuf.c:97:14: error: ‘mock_dmabuf_kmap_atomic’ defined but not used [-Werror=unused-function]
 static void *mock_dmabuf_kmap_atomic(struct dma_buf *dma_buf, unsigned long page_num)

Fixes: f664a526 ("dma-buf: remove kmap_atomic interface")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180620162152.1158-1-chris@chris-wilson.co.ukReviewed-by: Christian König <christian.koenig@amd.com>

We got a few conflicts in drm_atomic.c after merging the DRM writeback support,
now we need a backmerge to unlock develop development on drm-misc-next.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>

Due to the fact that writeback connectors behave in a special way
in DRM (they always report being disconnected) we might confuse some
userspace. Add a client capability for writeback connectors that will
filter them out for clients that don't understand the capability.

Changelog:
 - only accept the capability if the client has already set the
DRM_CLIENT_CAP_ATOMIC one.

Cc: Sean Paul <seanpaul@chromium.org>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Link: https://patchwork.freedesktop.org/patch/229038/

Add the WRITEBACK_OUT_FENCE_PTR property to writeback connectors, to
enable userspace to get a fence which will signal once the writeback is
complete. It is not allowed to request an out-fence without a
framebuffer attached to the connector.

A timeline is added to drm_writeback_connector for use by the writeback
out-fences.

In the case of a commit failure or DRM_MODE_ATOMIC_TEST_ONLY, the fence
is set to -1.

Changes from v2:
 - Rebase onto Gustavo Padovan's v9 explicit sync series
 - Change out_fence_ptr type to s32 __user *
 - Set *out_fence_ptr to -1 in drm_atomic_connector_set_property
 - Store fence in drm_writeback_job
 Gustavo Padovan:
 - Move out_fence_ptr out of connector_state
 - Signal fence from drm_writeback_signal_completion instead of
   in driver directly

Changes from v3:
 - Rebase onto commit 7e9081c5 ("drm/fence: fix memory overwrite
   when setting out_fence fd") (change out_fence_ptr to s32 __user *,
   for real this time.)
 - Update documentation around WRITEBACK_OUT_FENCE_PTR
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
[rebased and fixed conflicts]
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/229036/

Writeback connectors represent writeback engines which can write the
CRTC output to a memory framebuffer. Add a writeback connector type and
related support functions.

Drivers should initialize a writeback connector with
drm_writeback_connector_init() which takes care of setting up all the
writeback-specific details on top of the normal functionality of
drm_connector_init().

Writeback connectors have a WRITEBACK_FB_ID property, used to set the
output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the
supported writeback formats to userspace.

When a framebuffer is attached to a writeback connector with the
WRITEBACK_FB_ID property, it is used only once (for the commit in which
it was included), and userspace can never read back the value of
WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is
attached to a CRTC.

Changes since v1:
 - Added drm_writeback.c + documentation
 - Added helper to initialize writeback connector in one go
 - Added core checks
 - Squashed into a single commit
 - Dropped the client cap
 - Writeback framebuffers are no longer persistent

Changes since v2:
 Daniel Vetter:
 - Subclass drm_connector to drm_writeback_connector
 - Relax check to allow CRTC to be set without an FB
 - Add some writeback_ prefixes
 - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary
 Gustavo Padovan:
 - Add drm_writeback_job to handle writeback signalling centrally

Changes since v3:
 - Rebased
 - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS

Chances since v4:
 - Embed a drm_encoder inside the drm_writeback_connector to
   reduce the amount of boilerplate code required from the drivers
   that are using it.

Changes since v5:
 - Added Rob Clark's atomic_commit() vfunc to connector helper
   funcs, so that writeback jobs are committed from atomic helpers
 - Updated create_writeback_properties() signature to return an
   error code rather than a boolean false for failure.
 - Free writeback job with the connector state rather than when
   doing the cleanup_work()

Changes since v7:
 - fix extraneous use of out_fence that is only introduced in a
   subsequent patch.

Changes since v8:
 - whitespace changes pull from subsequent patch

Changes since v9:
 - Revert the v6 changes that free the writeback job in the connector
   state cleanup and return to doing it in the cleanup_work() function
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
[rebased and fixed conflicts]
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
[rebased and added atomic_commit() vfunc for writeback jobs]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/229037/

Neither used nor correctly implemented anywhere. Just completely remove
the interface.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/226645/

The device parameter is completely unused because it is available in the
attachment structure as well.

v2: fix kerneldoc as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/226643/

Same justification as for drm_gem_fb_prepare_fb.

Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-9-daniel.vetter@ffwll.ch
Link: https://patchwork.freedesktop.org/patch/msgid/20180409085134.27321-1-daniel.vetter@ffwll.ch

I've done a lot of history digging. The first signs of this
optimization was introduced in i915:

commit 25067bfc
Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Date:   Wed Sep 10 12:03:17 2014 -0300

    drm/i915: pin sprite fb only if it changed

without much justification. Pinning already pinned stuff is real cheap
(it's just obj->pin_count++ really), and the missing implicit sync was
entirely forgotten about it seems. It's at least not mentioned
anywhere it the commit message.

It was also promptly removed shortly afterwards in

commit ea2c67bb
Author: Matt Roper <matthew.d.roper@intel.com>
Date:   Tue Dec 23 10:41:52 2014 -0800

    drm/i915: Move to atomic plane helpers (v9)

again without really mentioning the side-effect that plane updates
with the same fb now again obey implicit syncing.

Note that this only ever applied to the plane_update hook, all other
legacy entry points (set_base, page_flip) always obeyed implicit sync
in the drm/i915 driver.

The real source of this code here seems to be msm, copied to vc4, then
copied to tinydrm. I've also tried to dig around in all available msm
sources, but the corresponding check for fb != old_fb is present ever
since the initial merge in

commit cf3a7e4c
Author: Rob Clark <robdclark@gmail.com>
Date:   Sat Nov 8 13:21:06 2014 -0500

    drm/msm: atomic core bits

The only older version I've found of msm atomic code predates the
atomic helpers, and so didn't even use any of this. It also does not
have a corresponding check (because it simply did no implicit sync at
all).

I've chatted with Rob on irc, and he didn't remember the reason for
this either.

Note we had epic amounts of fun with too much syncing against
_vblank_, especially around cursor updates. But I don't ever
discussing a need for less syncing against implicit fences.

Also note that explicit fencing allows you to sidetrack all of this,
at least for all the drivers correctly implemented using
drm_atomic_set_fence_for_plane().

Given that it seems to be an accident of history, and that big drivers
like i915 (and also nouveau it seems, I didn't follow the
amdgpu/radeon sync code to figure this out properly there) never have
done it, let's remove this.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-8-daniel.vetter@ffwll.ch

The vop irq is shared between vop and iommu and irq probing in the
iommu driver moved to the probe function recently. This can in some
cases lead to a stall if the irq is triggered while the vop driver
still has it disabled, but the vop irq handler gets called.

But there is no real need to disable the irq, as the vop can simply
also track its enabled state and ignore irqs in that case.
For this we can simply check the power-domain state of the vop,
similar to how the iommu driver does it.

So remove the enable/disable handling and add appropriate condition
to the irq handler.

changes in v2:
- move to just check the power-domain state
- add clock handling
changes in v3:
- clarify comment to speak of runtime-pm not power-domain
changes in v4:
- address Marc's comments (clk-enable WARN_ON and style improvement)

Fixes: d0b912bd ("iommu/rockchip: Request irqs in rk_iommu_probe()")
Cc: stable@vger.kernel.org
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180612132028.27490-3-heiko@sntech.de

Judging from the iommu code, both the hclk and aclk are necessary for
register access. Split them off into separate functions from the regular
vop enablement, so that we can use them elsewhere as well.

Fixes: d0b912bd ("iommu/rockchip: Request irqs in rk_iommu_probe()")
[prerequisite change for the actual fix]
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180612132028.27490-2-heiko@sntech.de

This patch add checks for atomic_[duplicate/destroy]_state of
drm_[connector/crtc/plane]_funcs for atomic drivers in the relevant
drm_*_init functions since these callback are mandatory for atomic drivers.

Update the kerneldoc comments for those callbacks.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525012555.GA8448@haneen-vb

We use jitter bypass mode for spdif, so do not need to set jitter mode
related bit in SPDIF_CTRL_ADDR register. But of course we need to keep
the SPDIF_ENABLE bit.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1526979222-32478-1-git-send-email-hl@rock-chips.com

The device node iterators perform an of_node_get on each iteration, so a
jump out of the loop requires an of_node_put.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@

 for_each_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
+  of_node_put(child);
?  break;
   ...
}
... when != child
// </smpl>

Fixes: 34cc0aa2 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Cc: stable@vger.kernel.org
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1527102436-13447-6-git-send-email-Julia.Lawall@lip6.fr

drm_private_state has a back pointer to the drm_atomic_state,
however that was not initialized in drm_atomic_get_private_obj_state
after duplication, as it is the case for other drm atomic getters
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1527701452-1934-1-git-send-email-alexandru-cosmin.gheorghe@arm.comSigned-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

Print out the modeline when we reject a bad user mode. Avoids having to
guess why it was rejected.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611193403.16118-2-ville.syrjala@linux.intel.comReviewed-by: Harry Wentland <harry.wentland@amd.com>

Print the id/name of the object we're dealing with. Makes it easier to
figure out what's going on. Also toss in a few extra debug prints that
might be useful.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611193403.16118-1-ville.syrjala@linux.intel.comReviewed-by: Harry Wentland <harry.wentland@amd.com>

Fixes for 4.18. Highlights:
- Fixes for gfxoff on Raven
- Remove an ATPX quirk now that the root cause is fixed
- Runtime PM fixes
- Vega20 register header update
- Wattman fixes
- Misc bug fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180614141428.2909-1-alexander.deucher@amd.com

Fix the issue that SCLK&MCLK can't be set higher than dpm7 when
OD is enabled in SMU7.

v2: fix warning (Alex)
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Rex Zhu<rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch makes RC_CORE to be selected with this driver.

sil_sii8620 driver calls remote controller interfaces directly
so RC_CORE should be enabled mandatorily.

And some boards not using remote controller device don't really
need to know that RC_CORE config should be enabled to use sil_sii8620
driver only for HDMI.

Changelog v2:
- select INPUT because compiling will fail without INPUT.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1527154379-31886-1-git-send-email-inki.dae@samsung.com

Gfxoff is already enabled in amdgpu_device_ip_set_powergating_state.
So, no need to enable it again in pp_late_init.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

WARN_ON possible buffer overflow and avoid unnecessary dereference.

v2: change BUG_ON to WARN_ON
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The register field hsas been changed in df 3.6, update to correct setting
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As hw required, soc clock must large than mclk, So we set max soc
clock to OD Max Memory clk.
But on workstation, vbios do not support OD feature, the OD max memory
clock is equal to 0. In this case, driver can support underclocking.
and set od max memory clock to the value in highest memory dpm level.
So the od max memory clock should be less than highest soc clock.
and driver should not change the soc clock.

caused by commit ca57b9b0a156
("drm/amd/pp: Allow underclocking when od table is empty in vbios")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes stale buffer object (bo) usage for cursor plane

Cursor plane's bo operations are handled in DC code.
Currently, atomic_commit() does not handle bo operations
for cursor plane, as a result the bo assigned for cursor
plane in dm_plane_helper_prepare_fb() is not coherent
with the updates to the same made in dc code.This mismatch
leads to "bo" corruption and hence crashes during S3 entry.

This patch cleans up the code which was added as a hack
for 4.9 version only.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The current use of result is or'ing in values and checking for
a non-zero result, however, result is not initialized to zero
so it potentially contains garbage to start with. Fix this by
initializing it to the first return from the call to
vega10_program_didt_config_registers.

Detected by cppcheck:
"(error) Uninitialized variable: result"

Fixes: 9b7b8154 ("drm/amd/powerplay: added didt support for vega10")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Huang Rui <ray.huang@amd.com>
[Fix the subject as Colin's comment]
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The clocks should be adjusted after display configuration changed.
Otherwise, the socclk and memclk may be forced on an unnecessary higher
level.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

So, unfortunately I recently made the discovery that in the upstream
kernel, the only reason that amdgpu is not currently suffering from
issues with runtime PM putting the GPU into suspend while it's driving
displays is due to the fact that on most prime systems, we have sound
devices associated with the GPU that hold their own runtime PM ref for
the GPU.

What this means however, is that in the event that there isn't any kind
of sound device active (which can easily be reproduced by building a
kernel with sound drivers disabled), the GPU will fall asleep even when
there's displays active. This appears to be in part due to the fact that
amdgpu has not actually ever relied on it's rpm_idle() function to be
the only thing keeping it running, and normally grabs it's own power
references whenever there are displays active (as can be seen with the
original pre-DC codepath in amdgpu_display_crtc_set_config() in
amdgpu_display.c). This means it's very likely that this bug was
introduced during the switch over the DC.

So to fix this, we start grabbing runtime PM references every time we
enable a previously disabled CRTC in atomic_commit_tail(). This appears
to be the correct solution, as it matches up with what i915 does in
i915/intel_runtime_pm.c.

The one sideaffect of this is that we ignore the variable that the
pre-DC code used to use for tracking when it needed runtime PM refs,
adev->have_disp_power_ref. This is mainly because there's no way for a
driver to tell whether or not all of it's CRTCs are enabled or disabled
when we've begun committing an atomic state, as there may be CRTC
commits happening in parallel that aren't contained within the atomic
state being committed. So, it's safer to just get/put a reference for
each CRTC being enabled or disabled in the new atomic state.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org