- 15 May, 2021 13 commits
-
-
Christophe Leroy authored
iomap_max_page_shift is expected to contain a page shift, so it can't be a 'bool', has to be an 'unsigned int' And fix the default values: P4D_SHIFT is when huge iomap is allowed. However, on some architectures (eg: powerpc book3s/64), P4D_SHIFT is not a constant so it can't be used to initialise a static variable. So, initialise iomap_max_page_shift with a maximum shift supported by the architecture, it is gated by P4D_SHIFT in vmap_try_huge_p4d() anyway. Link: https://lkml.kernel.org/r/ad2d366015794a9f21320dcbdd0a8eb98979e9df.1620898113.git.christophe.leroy@csgroup.eu Fixes: bbc180a5 ("mm: HUGE_VMAP arch support cleanup") Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rasmus Villemoes authored
When I added CONFIG_MODPROBE_PATH, I neglected to update Documentation/. It's still true that this defaults to /sbin/modprobe, but now via a level of indirection. So document that the kernel might have been built with something other than /sbin/modprobe as the initial value. Link: https://lkml.kernel.org/r/20210420125324.1246826-1-linux@rasmusvillemoes.dk Fixes: 17652f42 ("modules: add CONFIG_MODPROBE_PATH") Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
-
Jouni Roivas authored
I believe there are some issues introduced by commit 31651c60 ("hfsplus: avoid deadlock on file truncation") HFS+ has extent records which always contains 8 extents. In case the first extent record in catalog file gets full, new ones are allocated from extents overflow file. In case shrinking truncate happens to middle of an extent record which locates in extents overflow file, the logic in hfsplus_file_truncate() was changed so that call to hfs_brec_remove() is not guarded any more. Right action would be just freeing the extents that exceed the new size inside extent record by calling hfsplus_free_extents(), and then check if the whole extent record should be removed. However since the guard (blk_cnt > start) is now after the call to hfs_brec_remove(), this has unfortunate effect that the last matching extent record is removed unconditionally. To reproduce this issue, create a file which has at least 10 extents, and then perform shrinking truncate into middle of the last extent record, so that the number of remaining extents is not under or divisible by 8. This causes the last extent record (8 extents) to be removed totally instead of truncating into middle of it. Thus this causes corruption, and lost data. Fix for this is simply checking if the new truncated end is below the start of this extent record, making it safe to remove the full extent record. However call to hfs_brec_remove() can't be moved to it's previous place since we're dropping ->tree_lock and it can cause a race condition and the cached info being invalidated possibly corrupting the node data. Another issue is related to this one. When entering into the block (blk_cnt > start) we are not holding the ->tree_lock. We break out from the loop not holding the lock, but hfs_find_exit() does unlock it. Not sure if it's possible for someone else to take the lock under our feet, but it can cause hard to debug errors and premature unlocking. Even if there's no real risk of it, the locking should still always be kept in balance. Thus taking the lock now just before the check. Link: https://lkml.kernel.org/r/20210429165139.3082828-1-jouni.roivas@tuxera.com Fixes: 31651c60 ("hfsplus: avoid deadlock on file truncation") Signed-off-by:
Jouni Roivas <jouni.roivas@tuxera.com> Reviewed-by:
Anton Altaparmakov <anton@tuxera.com> Cc: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Cc: Viacheslav Dubeyko <slava@dubeyko.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Matthew Wilcox (Oracle) authored
A readahead request will not allocate more memory than can be represented by a size_t, even on systems that have HIGHMEM available. Change the length functions from returning an loff_t to a size_t. Link: https://lkml.kernel.org/r/20210510201201.1558972-1-willy@infradead.org Fixes: 32c0a6bc ("btrfs: add and use readahead_batch_length") Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by:
Darrick J. Wong <djwong@kernel.org> Reported-by:
-
Peter Collingbourne authored
These tests deliberately access these arrays out of bounds, which will cause the dynamic local bounds checks inserted by CONFIG_UBSAN_LOCAL_BOUNDS to fail and panic the kernel. To avoid this problem, access the arrays via volatile pointers, which will prevent the compiler from being able to determine the array bounds. These accesses use volatile pointers to char (char *volatile) rather than the more conventional pointers to volatile char (volatile char *) because we want to prevent the compiler from making inferences about the pointer itself (i.e. its array bounds), not the data that it refers to. Link: https://lkml.kernel.org/r/20210507025915.1464056-1-pcc@google.com Link: https://linux-review.googlesource.com/id/I90b1713fbfa1bf68ff895aef099ea77b98a7c3b9Signed-off-by:
Peter Collingbourne <pcc@google.com> Tested-by:
Alexander Potapenko <glider@google.com> Reviewed-by:
Andrey Konovalov <andreyknvl@gmail.com> Cc: Peter Collingbourne <pcc@google.com> Cc: George Popescu <georgepope@android.com> Cc: Elena Petrova <lenaptr@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Matthew Wilcox (Oracle) authored
32-bit architectures which expect 8-byte alignment for 8-byte integers and need 64-bit DMA addresses (arm, mips, ppc) had their struct page inadvertently expanded in 2019. When the dma_addr_t was added, it forced the alignment of the union to 8 bytes, which inserted a 4 byte gap between 'flags' and the union. Fix this by storing the dma_addr_t in one or two adjacent unsigned longs. This restores the alignment to that of an unsigned long. We always store the low bits in the first word to prevent the PageTail bit from being inadvertently set on a big endian platform. If that happened, get_user_pages_fast() racing against a page which was freed and reallocated to the page_pool could dereference a bogus compound_head(), which would be hard to trace back to this cause. Link: https://lkml.kernel.org/r/20210510153211.1504886-1-willy@infradead.org Fixes: c25fff71 ("mm: add dma_addr_t to struct page") Signed-off-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Tested-by:
Matteo Croce <mcroce@linux.microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hugh Dickins authored
This reverts commit 3e96b6a2. General Protection Fault in rmap_walk_ksm() under memory pressure: remove_rmap_item_from_tree() needs to take page lock, of course. Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2105092253500.1127@eggly.anvilsSigned-off-by:
Hugh Dickins <hughd@google.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Axel Rasmussen authored
Consider the following sequence of events: 1. Userspace issues a UFFD ioctl, which ends up calling into shmem_mfill_atomic_pte(). We successfully account the blocks, we shmem_alloc_page(), but then the copy_from_user() fails. We return -ENOENT. We don't release the page we allocated. 2. Our caller detects this error code, tries the copy_from_user() after dropping the mmap_lock, and retries, calling back into shmem_mfill_atomic_pte(). 3. Meanwhile, let's say another process filled up the tmpfs being used. 4. So shmem_mfill_atomic_pte() fails to account blocks this time, and immediately returns - without releasing the page. This triggers a BUG_ON in our caller, which asserts that the page should always be consumed, unless -ENOENT is returned. To fix this, detect if we have such a "dangling" page when accounting fails, and if so, release it before returning. Link: https://lkml.kernel.org/r/20210428230858.348400-1-axelrasmussen@google.com Fixes: cb658a45 ("userfaultfd: shmem: avoid leaking blocks and used blocks in UFFDIO_COPY") Signed-off-by:
Axel Rasmussen <axelrasmussen@google.com> Reported-by:
Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Phillip Lougher authored
Sysbot has reported a "divide error" which has been identified as being caused by a corrupted file_size value within the file inode. This value has been corrupted to a much larger value than expected. Calculate_skip() is passed i_size_read(inode) >> msblk->block_log. Due to the file_size value corruption this overflows the int argument/variable in that function, leading to the divide error. This patch changes the function to use u64. This will accommodate any unexpectedly large values due to corruption. The value returned from calculate_skip() is clamped to be never more than SQUASHFS_CACHED_BLKS - 1, or 7. So file_size corruption does not lead to an unexpectedly large return result here. Link: https://lkml.kernel.org/r/20210507152618.9447-1-phillip@squashfs.org.ukSigned-off-by:
Phillip Lougher <phillip@squashfs.org.uk> Reported-by: <syzbot+e8f781243ce16ac2f962@syzkaller.appspotmail.com> Reported-by: <syzbot+7b98870d4fec9447b951@syzkaller.appspotmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Alistair Popple authored
Splitting an earlier version of a patch that allowed calling __request_region() while holding the resource lock into a series of patches required changing the return code for the newly introduced __request_region_locked(). Unfortunately this change was not carried through to a subsequent commit 56fd9491 ("kernel/resource: fix locking in request_free_mem_region") in the series. This resulted in a use-after-free due to freeing the struct resource without properly releasing it. Fix this by correcting the return code check so that the struct is not freed if the request to add it was successful. Link: https://lkml.kernel.org/r/20210512073528.22334-1-apopple@nvidia.com Fixes: 56fd9491 ("kernel/resource: fix locking in request_free_mem_region") Signed-off-by:
Alistair Popple <apopple@nvidia.com> Reported-by:
kernel test robot <oliver.sang@intel.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Muchun Song <smuchun@gmail.com> Cc: Oliver Sang <oliver.sang@intel.com> Signed-off-by:
-
Vlastimil Babka authored
Paul E. McKenney reported [1] that commit 1f0723a4 ("mm, slub: enable slub_debug static key when creating cache with explicit debug flags") results in the lockdep complaint: ====================================================== WARNING: possible circular locking dependency detected 5.12.0+ #15 Not tainted ------------------------------------------------------ rcu_torture_sta/109 is trying to acquire lock: ffffffff96063cd0 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_enable+0x9/0x20 but task is already holding lock: ffffffff96173c28 (slab_mutex){+.+.}-{3:3}, at: kmem_cache_create_usercopy+0x2d/0x250 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (slab_mutex){+.+.}-{3:3}: lock_acquire+0xb9/0x3a0 __mutex_lock+0x8d/0x920 slub_cpu_dead+0x15/0xf0 cpuhp_invoke_callback+0x17a/0x7c0 cpuhp_invoke_callback_range+0x3b/0x80 _cpu_down+0xdf/0x2a0 cpu_down+0x2c/0x50 device_offline+0x82/0xb0 remove_cpu+0x1a/0x30 torture_offline+0x80/0x140 torture_onoff+0x147/0x260 kthread+0x10a/0x140 ret_from_fork+0x22/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: check_prev_add+0x8f/0xbf0 __lock_acquire+0x13f0/0x1d80 lock_acquire+0xb9/0x3a0 cpus_read_lock+0x21/0xa0 static_key_enable+0x9/0x20 __kmem_cache_create+0x38d/0x430 kmem_cache_create_usercopy+0x146/0x250 kmem_cache_create+0xd/0x10 rcu_torture_stats+0x79/0x280 kthread+0x10a/0x140 ret_from_fork+0x22/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(slab_mutex); lock(cpu_hotplug_lock); lock(slab_mutex); lock(cpu_hotplug_lock); *** DEADLOCK *** 1 lock held by rcu_torture_sta/109: #0: ffffffff96173c28 (slab_mutex){+.+.}-{3:3}, at: kmem_cache_create_usercopy+0x2d/0x250 stack backtrace: CPU: 3 PID: 109 Comm: rcu_torture_sta Not tainted 5.12.0+ #15 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: dump_stack+0x6d/0x89 check_noncircular+0xfe/0x110 ? lock_is_held_type+0x98/0x110 check_prev_add+0x8f/0xbf0 __lock_acquire+0x13f0/0x1d80 lock_acquire+0xb9/0x3a0 ? static_key_enable+0x9/0x20 ? mark_held_locks+0x49/0x70 cpus_read_lock+0x21/0xa0 ? static_key_enable+0x9/0x20 static_key_enable+0x9/0x20 __kmem_cache_create+0x38d/0x430 kmem_cache_create_usercopy+0x146/0x250 ? rcu_torture_stats_print+0xd0/0xd0 kmem_cache_create+0xd/0x10 rcu_torture_stats+0x79/0x280 ? rcu_torture_stats_print+0xd0/0xd0 kthread+0x10a/0x140 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 This is because there's one order of locking from the hotplug callbacks: lock(cpu_hotplug_lock); // from hotplug machinery itself lock(slab_mutex); // in e.g. slab_mem_going_offline_callback() And commit 1f0723a4 made the reverse sequence possible: lock(slab_mutex); // in kmem_cache_create_usercopy() lock(cpu_hotplug_lock); // kmem_cache_open() -> static_key_enable() The simplest fix is to move static_key_enable() to a place before slab_mutex is taken. That means kmem_cache_create_usercopy() in mm/slab_common.c which is not ideal for SLUB-specific code, but the #ifdef CONFIG_SLUB_DEBUG makes it at least self-contained and obvious. [1] https://lore.kernel.org/lkml/20210502171827.GA3670492@paulmck-ThinkPad-P17-Gen-1/ Link: https://lkml.kernel.org/r/20210504120019.26791-1-vbabka@suse.cz Fixes: 1f0723a4 ("mm, slub: enable slub_debug static key when creating cache with explicit debug flags") Signed-off-by:
Paul E. McKenney <paulmck@kernel.org> Tested-by:
David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Peter Xu authored
When rework early cow of pinned hugetlb pages, we moved huge_ptep_get() upper but overlooked a side effect that the huge_ptep_get() will fetch the pte after wr-protection. After moving it upwards, we need explicit wr-protect of child pte or we will keep the write bit set in the child process, which could cause data corrution where the child can write to the original page directly. This issue can also be exposed by "memfd_test hugetlbfs" kselftest. Link: https://lkml.kernel.org/r/20210503234356.9097-3-peterx@redhat.com Fixes: 4eae4efa ("hugetlb: do early cow when page pinned on src mm") Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Peter Xu authored
Patch series "mm/hugetlb: Fix issues on file sealing and fork", v2. Hugh reported issue with F_SEAL_FUTURE_WRITE not applied correctly to hugetlbfs, which I can easily verify using the memfd_test program, which seems that the program is hardly run with hugetlbfs pages (as by default shmem). Meanwhile I found another probably even more severe issue on that hugetlb fork won't wr-protect child cow pages, so child can potentially write to parent private pages. Patch 2 addresses that. After this series applied, "memfd_test hugetlbfs" should start to pass. This patch (of 2): F_SEAL_FUTURE_WRITE is missing for hugetlb starting from the first day. There is a test program for that and it fails constantly. $ ./memfd_test hugetlbfs memfd-hugetlb: CREATE memfd-hugetlb: BASIC memfd-hugetlb: SEAL-WRITE memfd-hugetlb: SEAL-FUTURE-WRITE mmap() didn't fail as expected Aborted (core dumped) I think it's probably because no one is really running the hugetlbfs test. Fix it by checking FUTURE_WRITE also in hugetlbfs_file_mmap() as what we do in shmem_mmap(). Generalize a helper for that. Link: https://lkml.kernel.org/r/20210503234356.9097-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210503234356.9097-2-peterx@redhat.com Fixes: ab3948f5 ("mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd") Signed-off-by:
-
- 14 May, 2021 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: "Fixes and cpucaps.h automatic generation: - Generate cpucaps.h at build time rather than carrying lots of #defines. Merged at -rc1 to avoid some conflicts during the merge window. - Initialise RGSR_EL1.SEED in __cpu_setup() as it may be left as 0 out of reset and the IRG instruction would not function as expected if only the architected pseudorandom number generator is implemented. - Fix potential race condition in __sync_icache_dcache() where the PG_dcache_clean page flag is set before the actual cache maintenance. - Fix header include in BTI kselftests" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix race condition on PG_dcache_clean in __sync_icache_dcache() arm64: tools: Add __ASM_CPUCAPS_H to the endif in cpucaps.h arm64: mte: initialize RGSR_EL1.SEED in __cpu_setup kselftest/arm64: Add missing stddef.h include to BTI tests arm64: Generate cpucaps.h -
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs fixes from Jaegeuk Kim: "This fixes some critical bugs such as memory leak in compression flows, kernel panic when handling errors, and swapon failure due to newly added condition check" * tag 'f2fs-5.13-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: return EINVAL for hole cases in swap file f2fs: avoid swapon failure by giving a warning first f2fs: compress: fix to assign cc.cluster_idx correctly f2fs: compress: fix race condition of overwrite vs truncate f2fs: compress: fix to free compress page correctly f2fs: support iflag change given the mask f2fs: avoid null pointer access when handling IPU error
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Not much here, mostly amdgpu fixes, with a couple of radeon, and a cosmetic vc4. Two MAINTAINERS file updates also. amdgpu: - Fixes for flexible array conversions - Fix sysfs attribute init - Harvesting fixes - VCN CG/PG fixes for Picasso radeon: - Fixes for flexible array conversions - Fix for flickering on Oland with multiple 4K displays vc4: - drop unused function" * tag 'drm-fixes-2021-05-14' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: update vcn1.0 Non-DPG suspend sequence drm/amdgpu: set vcn mgcg flag for picasso drm/radeon/dpm: Disable sclk switching on Oland when two 4K 60Hz monitors are connected drm/amdgpu: update the method for harvest IP for specific SKU drm/amdgpu: add judgement when add ip blocks (v2) drm/amd/display: Initialize attribute for hdcp_srm sysfs file drm/amd/pm: Fix out-of-bounds bug drm/radeon/si_dpm: Fix SMU power state load drm/radeon/ni_dpm: Fix booting bug MAINTAINERS: Update address for Emma Anholt MAINTAINERS: Update my e-mail drm/vc4: remove unused function drm/ttm: Do not add non-system domain BO into swap list
-
Catalin Marinas authored
To ensure that instructions are observable in a new mapping, the arm64 set_pte_at() implementation cleans the D-cache and invalidates the I-cache to the PoU. As an optimisation, this is only done on executable mappings and the PG_dcache_clean page flag is set to avoid future cache maintenance on the same page. When two different processes map the same page (e.g. private executable file or shared mapping) there's a potential race on checking and setting PG_dcache_clean via set_pte_at() -> __sync_icache_dcache(). While on the fault paths the page is locked (PG_locked), mprotect() does not take the page lock. The result is that one process may see the PG_dcache_clean flag set but the I/D cache maintenance not yet performed. Avoid test_and_set_bit(PG_dcache_clean) in favour of separate test_bit() and set_bit(). In the rare event of a race, the cache maintenance is done twice. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Steven Price <steven.price@arm.com> Reviewed-by:
Steven Price <steven.price@arm.com> Acked-by:
Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210514095001.13236-1-catalin.marinas@arm.comSigned-off-by:
-
- 13 May, 2021 22 commits
-
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.13-2021-05-13' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.13-2021-05-13: amdgpu: - Fixes for flexible array conversions - Fix sysfs attribute init - Harvesting fixes - VCN CG/PG fixes for Picasso radeon: - Fixes for flexible array conversions - Fix for flickering on Oland with multiple 4K displays Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210513163228.3963-1-alexander.deucher@amd.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Remove an unused function and a MAINTAINERS update. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These close a coverage gap in the intel_pstate driver and fix runtime PM child count imbalance related to interactions with system-wide suspend. Specifics: - Make intel_pstate work as expected on systems where the platform firmware enables HWP even though the HWP EPP support is not advertised (Rafael Wysocki). - Fix possible runtime PM child count imbalance that may occur if other runtime PM functions are called after invoking pm_runtime_force_suspend() and before pm_runtime_force_resume() is called (Tony Lindgren)" * tag 'pm-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: runtime: Fix unpaired parent child_count for force_resume cpufreq: intel_pstate: Use HWP if enabled by platform firmware -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These revert an unnecessary revert of an ACPI power management commit, add a missing device ID to one of the lists and fix a possible memory leak in an error path. Specifics: - Revert a revert of a recent ACPI power management change that does not need to be reverted after all (Rafael Wysocki). - Add missing fan device ID to the list of device IDs for which the devices should not be put into the ACPI PM domain (Sumeet Pawnikar). - Fix possible memory leak in an error path in the ACPI device enumeration code (Christophe JAILLET)" * tag 'acpi-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Add ACPI ID of Alder Lake Fan ACPI: scan: Fix a memory leak in an error handling path Revert "Revert "ACPI: scan: Turn off unused power resources during initialization"" -
Rafael J. Wysocki authored
* acpi-pm: ACPI: PM: Add ACPI ID of Alder Lake Fan Revert "Revert "ACPI: scan: Turn off unused power resources during initialization""
-
Rafael J. Wysocki authored
* pm-core: PM: runtime: Fix unpaired parent child_count for force_resume
-
Linus Torvalds authored
Merge VT_RESIZEX fixes from Maciej Rozycki: "I got to the bottom of the issue with VT_RESIZEX recently discussed and came up with this small patch series, fixing an additional issue that I originally thought might be broken VGA hardware emulation with my laptop, which however turned out to be intertwined with the original problem and also a regression introduced somewhat later. The fix for that because the first patch, and then to make backporting feasible I had to put a revert of the offending change from last September next, followed by a proper fix for the framebuffer issue that change had tried to address. See individual change descriptions for details. These have been verified with true VGA hardware (a Trident TVGA8900 ISA video adapter) using various combinations of `svgatextmode' and `setfont' command invocations to change both the VT size and the font size, and also switching between the text console and X11, both by starting/stopping the X server and by switching between VTs. All this to ensure bringing the behaviour of VGA text console back to correct operation as it used to be with Linux 2.6.18" * emailed patches from Maciej W. Rozycki <macro@orcam.me.uk>: vt: Fix character height handling with VT_RESIZEX vt_ioctl: Revert VT_RESIZEX parameter handling removal vgacon: Record video mode changes with VT_RESIZEX
-
Maciej W. Rozycki authored
Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter which is the number of pixel rows per character (cell) rather than the height of the font used. For framebuffer devices the two values are always the same, because the former is inferred from the latter one. For VGA used as a true text mode device these two parameters are independent from each other: the number of pixel rows per character is set in the CRT controller, while font height is in fact hardwired to 32 pixel rows and fonts of heights below that value are handled by padding their data with blanks when loaded to hardware for use by the character generator. One can change the setting in the CRT controller and it will update the screen contents accordingly regardless of the font loaded. The `v_clin' parameter is used by the `vgacon' driver to set the height of the character cell and then the cursor position within. Make the parameter explicit then, by defining a new `vc_cell_height' struct member of `vc_data', set it instead of `vc_font.height' from `v_clin' in the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver except where actual font data is accessed which as noted above is independent from the CRTC setting. This way the framebuffer console driver is free to ignore the `v_clin' parameter as irrelevant, as it always should have, avoiding any issues attempts to give the parameter a meaning there could have caused, such as one that has led to commit 988d0763 ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE"): "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than actual font height calculated by con_font_set() from ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates minimal amount of memory based on actual font height calculated by con_font_set(), use of vt_resizex() can cause UAF/OOB read for font data." The problem first appeared around Linux 2.5.66 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git> as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX code in `vt_ioctl' was updated as follows: if (clin) - video_font_height = clin; + vc->vc_font.height = clin; making the parameter apply to framebuffer devices as well, perhaps due to the use of "font" in the name of the original `video_font_height' variable. Use "cell" in the new struct member then to avoid ambiguity. References: [1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837 [2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3Signed-off-by:
Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by:
-
Maciej W. Rozycki authored
Revert the removal of code handling extra VT_RESIZEX ioctl's parameters beyond those that VT_RESIZE supports, fixing a functional regression causing `svgatextmode' not to resize the VT anymore. As a consequence of the reverted change when the video adapter is reprogrammed from the original say 80x25 text mode using a 9x16 character cell (720x400 pixel resolution) to say 80x37 text mode and the same character cell (720x592 pixel resolution), the VT geometry does not get updated and only upper two thirds of the screen are used for the VT, and the lower part remains blank. The proportions change according to text mode geometries chosen. Revert the change verbatim then, bringing back previous VT resizing. Signed-off-by:
-
Maciej W. Rozycki authored
Fix an issue with VGA console font size changes made after the initial video text mode has been changed with a user tool like `svgatextmode' calling the VT_RESIZEX ioctl. As it stands in that case the original screen geometry continues being used to validate further VT resizing. Consequently when the video adapter is firstly reprogrammed from the original say 80x25 text mode using a 9x16 character cell (720x400 pixel resolution) to say 80x37 text mode and the same character cell (720x592 pixel resolution), and secondly the CRTC character cell updated to 9x8 (by loading a suitable font with the KD_FONT_OP_SET request of the KDFONTOP ioctl), the VT geometry does not get further updated from 80x37 and only upper half of the screen is used for the VT, with the lower half showing rubbish corresponding to whatever happens to be there in the video memory that maps to that part of the screen. Of course the proportions change according to text mode geometries and font sizes chosen. Address the problem then, by updating the text mode geometry defaults rather than checking against them whenever the VT is resized via a user ioctl. Signed-off-by:
-
Linus Torvalds authored
Merge tag 'hwmon-for-v5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix bugs/regressions in adm9240, ltc2992, pmbus/fsp-3y, and occ drivers, plus a minor cleanup in the corsair-psu driver" * tag 'hwmon-for-v5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (adm9240) Fix writes into inX_max attributes hwmon: (ltc2992) Put fwnode in error case during ->probe() hwmon: (pmbus/fsp-3y) Fix FSP-3Y YH-5151E non-compliant vout encoding hwmon: (occ) Fix poll rate limiting hwmon: (corsair-psu) Remove unneeded semicolons
-
Mark Brown authored
Anshuman suggested this. Suggested-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210513151819.12526-1-broonie@kernel.orgSigned-off-by:
-
Sathishkumar S authored
update suspend register settings in Non-DPG mode. Signed-off-by:
Sathishkumar S <sathishkumar.sundararaju@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Sathishkumar S authored
enable vcn mgcg flag for picasso. Signed-off-by:
-
Kai-Heng Feng authored
Screen flickers rapidly when two 4K 60Hz monitors are in use. This issue doesn't happen when one monitor is 4K 60Hz (pixelclock 594MHz) and another one is 4K 30Hz (pixelclock 297MHz). The issue is gone after setting "power_dpm_force_performance_level" to "high". Following the indication, we found that the issue occurs when sclk is too low. So resolve the issue by disabling sclk switching when there are two monitors requires high pixelclock (> 297MHz). v2: - Only apply the fix to Oland. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Likun Gao authored
Update the method of disabling VCN IP for specific SKU for navi1x ASIC, it will judge whether should add the related IP at the function of amdgpu_device_ip_block_add(). Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
Likun GAO authored
Judgement whether to add an sw ip according to the harvest info. v2: fix indentation (Alex) Signed-off-by:
-
David Ward authored
It is stored in dynamically allocated memory, so sysfs_bin_attr_init() must be called to initialize it. (Note: "initialization" only sets the .attr.key member in this struct; it does not change the value of any other members.) Otherwise, when CONFIG_DEBUG_LOCK_ALLOC=y this message appears during boot: BUG: key ffff9248900cd148 has not been registered! Fixes: 9037246b ("drm/amd/display: Add sysfs interface for set/get srm") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1586Reported-by:Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by:
David Ward <david.ward@gatech.edu> Signed-off-by:
-
Gustavo A. R. Silva authored
Create new structure SISLANDS_SMC_SWSTATE_SINGLE, as initialState.levels and ACPIState.levels are never actually used as flexible arrays. Those arrays can be used as simple objects of type SISLANDS_SMC_HW_PERFORMANCE_LEVEL, instead. Currently, the code fails because flexible array _levels_ in struct SISLANDS_SMC_SWSTATE doesn't allow for code that accesses the first element of initialState.levels and ACPIState.levels arrays: drivers/gpu/drm/amd/pm/powerplay/si_dpm.c: 4820: table->initialState.levels[0].mclk.vDLL_CNTL = 4821: cpu_to_be32(si_pi->clock_registers.dll_cntl); ... 5021: table->ACPIState.levels[0].mclk.vDLL_CNTL = 5022: cpu_to_be32(dll_cntl); because such element cannot be accessed without previously allocating enough dynamic memory for it to exist (which never actually happens). So, there is an out-of-bounds bug in this case. That's why struct SISLANDS_SMC_SWSTATE should only be used as type for object driverState and new struct SISLANDS_SMC_SWSTATE_SINGLE is created as type for objects initialState, ACPIState and ULVState. Also, with the change from one-element array to flexible-array member in commit 0e1aa13c ("drm/amd/pm: Replace one-element array with flexible-array in struct SISLANDS_SMC_SWSTATE"), the size of dpmLevels in struct SISLANDS_SMC_STATETABLE should be fixed to be SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE instead of SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE - 1. Fixes: 0e1aa13c ("drm/amd/pm: Replace one-element array with flexible-array in struct SISLANDS_SMC_SWSTATE") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
Create new structure SISLANDS_SMC_SWSTATE_SINGLE, as initialState.levels and ACPIState.levels are never actually used as flexible arrays. Those arrays can be used as simple objects of type SISLANDS_SMC_HW_PERFORMANCE_LEVEL, instead. Currently, the code fails because flexible array _levels_ in struct SISLANDS_SMC_SWSTATE doesn't allow for code that access the first element of initialState.levels and ACPIState.levels arrays: 4353 table->initialState.levels[0].mclk.vDLL_CNTL = 4354 cpu_to_be32(si_pi->clock_registers.dll_cntl); ... 4555 table->ACPIState.levels[0].mclk.vDLL_CNTL = 4556 cpu_to_be32(dll_cntl); because such element cannot exist without previously allocating any dynamic memory for it (which never actually happens). That's why struct SISLANDS_SMC_SWSTATE should only be used as type for object driverState and new struct SISLANDS_SMC_SWSTATE_SINGLE is created as type for objects initialState, ACPIState and ULVState. Also, with the change from one-element array to flexible-array member in commit 96e27e8d ("drm/radeon/si_dpm: Replace one-element array with flexible-array in struct SISLANDS_SMC_SWSTATE"), the size of dpmLevels in struct SISLANDS_SMC_STATETABLE should be fixed to be SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE instead of SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE - 1. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1583 Fixes: 96e27e8d ("drm/radeon/si_dpm: Replace one-element array with flexible-array in struct SISLANDS_SMC_SWSTATE") Cc: stable@vger.kernel.org Reported-by:
-
Gustavo A. R. Silva authored
Create new structure NISLANDS_SMC_SWSTATE_SINGLE, as initialState.levels and ACPIState.levels are never actually used as flexible arrays. Those arrays can be used as simple objects of type NISLANDS_SMC_HW_PERFORMANCE_LEVEL, instead. Currently, the code fails because flexible array _levels_ in struct NISLANDS_SMC_SWSTATE doesn't allow for code that access the first element of initialState.levels and ACPIState.levels arrays: drivers/gpu/drm/radeon/ni_dpm.c: 1690 table->initialState.levels[0].mclk.vMPLL_AD_FUNC_CNTL = 1691 cpu_to_be32(ni_pi->clock_registers.mpll_ad_func_cntl); ... 1903: table->ACPIState.levels[0].mclk.vMPLL_AD_FUNC_CNTL = cpu_to_be32(mpll_ad_func_cntl); 1904: table->ACPIState.levels[0].mclk.vMPLL_AD_FUNC_CNTL_2 = cpu_to_be32(mpll_ad_func_cntl_2); because such element cannot exist without previously allocating any dynamic memory for it (which never actually happens). That's why struct NISLANDS_SMC_SWSTATE should only be used as type for object driverState and new struct SISLANDS_SMC_SWSTATE_SINGLE is created as type for objects initialState, ACPIState and ULVState. Also, with the change from one-element array to flexible-array member in commit 434fb1e7 ("drm/radeon/nislands_smc.h: Replace one-element array with flexible-array member in struct NISLANDS_SMC_SWSTATE"), the size of dpmLevels in struct NISLANDS_SMC_STATETABLE should be fixed to be NISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE instead of NISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE - 1. Bug: https://lore.kernel.org/dri-devel/3eedbe78-1fbd-4763-a7f3-ac5665e76a4a@xenosoft.de/ Fixes: 434fb1e7 ("drm/radeon/nislands_smc.h: Replace one-element array with flexible-array member in struct NISLANDS_SMC_SWSTATE") Cc: stable@vger.kernel.org Reported-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Tested-by:
-
Guenter Roeck authored
When converting the driver to use the devm_hwmon_device_register_with_info API, the wrong register was selected when writing into inX_max attributes. Fix it. Fixes: 124b7e34 ("hwmon: (adm9240) Convert to devm_hwmon_device_register_with_info API") Reported-by:
Chris Packham <Chris.Packham@alliedtelesis.co.nz> Tested-by:
Guenter Roeck <linux@roeck-us.net>
-
- 12 May, 2021 1 commit
-
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation fixes from Jonathan Corbet: "A set of straightforward documentation fixes" * tag 'docs-5.13-3' of git://git.lwn.net/linux: Remove link to nonexistent rocket driver docs docs: networking: device_drivers: fix bad usage of UTF-8 chars docs: hwmon: tmp103.rst: fix bad usage of UTF-8 chars docs: ABI: remove some spurious characters docs: ABI: remove a meaningless UTF-8 character docs: cdrom-standard.rst: get rid of uneeded UTF-8 chars Documentation: drop optional BOMs docs/zh_CN: Remove obsolete translation file
-
