This patch fixes a logic bug in NAT range calculations, which also
causes a large slowdown when ICMP floods go through NAT.

Author: Karlis Peisenieks

Originally from Al Viro
NE11-ltpc
* switched ltpc to dynamic allocation
* ltpc: embedded ->priv
* ltpc: fixed bugs in DMA allocation
* ltpc: fixed resource leaks on failure exits
* ltpc: fixed part of timer bugs (still a-f**ing-plenty of those)
* ltpc: fixed order of freeing bugs
Added
* switch to free_netdev

Now that all the magic chain of static devices is gone from Space.c
The initialization of the one remaining static device (ie the loopback driver)
can be simplified.

One small change was to reduce possibility of failing the initialization if
allocation of private data failed by just going without statistics.

Convert sbni driver
- new probing
- single allocation using alloc_netdev for private data

Analogous to previous patch.  Instead of dev_base list of static
entries, use a loop and dynamically allocate devices.

Tested only the 'no hardware' case.

Convert old ethernet device probing from dev_base linked list
to the probe_old_netdevs.

Blame me for this one ;-)

Builds and runs, but don't have old ISA hardware to really test it.
So please find some or review it carefully.

More from Al
NE12-cops
* switched cops to dynamic allocation
* cops: embedded ->priv
* cops: fixed ->irq clobbering on autoprobe
Added
* free_netdev

Based on Al viro's NE10-sdla
* switched sdla to dynamic allocation
* sdla: embedded ->priv
* sdla: fixed resource leaks on failure exits
Additionally fixes.
* get rid of cli/sti
* get rid of MOD/INC

Builds and probes, but don't have the hardware.
Driver has never built on 2.6 before this.

This set of patches is a mixture of Al's work to device initialization,
and some of my own to complete it for all the ether, tr, sbni, and loopback
devices.

The first patch adds the hook for converting old driver initialization
code over to dynamic allocation.

This part extracted from Al viro's set of net driver changes for ethertap.

  
- keep list of arrays for devices and use a lock
- make sure header is contiguous before overlaying data structure
- dynamically allocate dev->priv with alloc_netdev
- get rid of MOD_INC/DEC
- free devices on module unload
- keep refcount on slave device's since holding a ptr

o Big performance improvement.  The version of the driver in the kernel
  still had a "mdelay(1)" after every register write.  This capped
  performance at about 8Mbps and ate tons of CPU time.  (Luckily, most
  users of this card are just terminating a DSL line where its not too
  noticeable)

  However, after removing this delay the card started getting out of
  sync with the driver under stress tests.  After a couple days of chasing
  the bug I finally determine that the card's support for transmitting
  partial PDUs just doesn't quite work as advertised (before we would send
  a partial PDU to completely fill a VCC's transmit buffer and then send
  the rest of the skb when more buffer space filled up).  The usefulness of
  this is somewhat doubtful anyway and removing it cleaned up a lot of code.

  I also added some memory barriers to make sure operations to the card
  happen in the correct order.

  Now for the first time ever we get near line-rate performance out of this
  card (~19Mb/s TCP in netperf between two ~300Mhz machines)

o Locking changes (essentially the patch Chas sent me a couple weeks ago
  with some minor tweaking)  I'm still not sure we're getting 100% of the
  cases right but it's definitely FAR better than the old lock-less version.

o Cleanup the backlog draining code in lanai_shutdown_tx_vci()

o Remove outdated comment describing how to compile the module

o Got rid of the "service_novcc_[tr]x" stats - it's really the same error
  as "service_[tr]x" - there's no reason to count them separately.

o Use the ATM_25_PCR constant instead of computing it for ourselves

into iguana.be:/home/wim/BitKeeper/projects/linux-2.5-watchdog

into iguana.be:/home/wim/BitKeeper/projects/linux-2.5-watchdog

remove module_param's for wdt_start and wdt_stop
fix timeout check in init procedure

into home.osdl.org:/home/torvalds/v2.5/linux

as it uses the crc32 library.

The enclosed patch tries to clean the tulip de4x5 driver, and update
it to some of the 2.6 APIs :

- Use PCI and EISA probing APIs
- Use generic DMA API
- Fix DE425 init on the Jensen
- Remove de4x5 from Space.c

It's been tested on x86 and Alpha, with a DE425 (21040, EISA), a DE435
(21040, PCI) and a quad DLink (4*21143, PCI).

The major problem with this patch is that, because of the Space.c
removal, interfaces get potentially renumbered. This has been
discussed to death on lkml, without any obvious solution. IMHO, we'd
better remove as many drivers as we can from Space.c before
2.6.0-final ships...

forced into double negatives.

the compilation of cosa.c was already fixed in your BK tree, so we can
now remove the dependency on BROKEN.

This fixes the build of the via-pmu.c driver when CONFIG_PMAC_PBOOK is
not set.

From Benjamin Herrenschmidt <benh@kernel.crashing.org>:

This adds the Kconfig option for the PowerMac IDE driver "LED" feature
(using the laptop's front LED as a disk activity indicator).  It also
adds a small bit to ide-probe.c that was missing from Jens patch when he
added the activity function infrastructure.  He did add the hwif field,
but not the code to actually enable it.

From Daniela Engert <dani@ngrt.de>.

It was disabled to workaround a bug in a driver.  The orginal bug was
fixed but the workaround was not removed.

into home.osdl.org:/home/torvalds/v2.5/linux

This has three main parts: (1) support for the 440GP and 440GX processors,
(2) support for the "Ebony" and "Ocotea" reference boards for those processors,
and (3) support for 64-bit physical addresses.  The 440GP and 440GX are "Book E"
processors, and this introduces a CONFIG_BOOKE and some definitions that apply
to all Book E processors.

Having 64-bit physical addresses means that PTEs are now 64 bits.  The PTE pages
stay at 4kB, and the pgdir expands to 8kB.

amiflop didn't init the queue before assigning it to disk->queue. the
error handling was also immensely screwed, I've cleaned that up too.

into hostme.bitkeeper.com:/repos/c/cifs/linux-2.5cifs