- 06 Nov, 2015 29 commits
-
-
Rasmus Villemoes authored
The patch "slab.h: sprinkle __assume_aligned attributes" causes *tons* of whinges if you do 'make C=2' with sparse 0.5.0: CHECK drivers/media/usb/pwc/pwc-if.c include/linux/slab.h:307:43: error: attribute '__assume_aligned__': unknown attribute include/linux/slab.h:308:58: error: attribute '__assume_aligned__': unknown attribute include/linux/slab.h:337:73: error: attribute '__assume_aligned__': unknown attribute include/linux/slab.h:375:74: error: attribute '__assume_aligned__': unknown attribute include/linux/slab.h:378:80: error: attribute '__assume_aligned__': unknown attribute sparse apparently pretends to be gcc >= 4.9, yet isn't prepared to handle all the function attributes supported by those gccs and complains loudly. So hide the definition of __assume_aligned from it (so that the generic one in compiler.h gets used). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-By: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: Christopher Li <sparse@chrisli.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rasmus Villemoes authored
gcc 4.9 added the function attribute assume_aligned, indicating to the caller that the returned pointer may be assumed to have a certain minimal alignment. This is useful if, for example, the return value is passed to memset(). Add a shorthand macro for that. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Denis Kirjanov authored
A good candidate to return a boolean result. Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Cc: Christoph Lameter <cl@linux.com> Reviewed-by: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ulrich Obergfell authored
Theoretically it is possible that the watchdog timer expires right at the time when a user sets 'watchdog_thresh' to zero (note: this disables the lockup detectors). In this scenario, the is_softlockup() function - which is called by the timer - could produce a false positive. Fix this by checking the current value of 'watchdog_thresh'. Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ulrich Obergfell authored
watchdog_{park|unpark}_threads() are now called in code paths that protect themselves against CPU hotplug, so {get|put}_online_cpus() calls are redundant and can be removed. Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ulrich Obergfell authored
The handler functions for watchdog parameters in /proc/sys/kernel do not protect themselves against races with CPU hotplug. Hence, theoretically it is possible that a new watchdog thread is started on a hotplugged CPU while a parameter is being modified, and the thread could thus use a parameter value that is 'in transition'. For example, if 'watchdog_thresh' is being set to zero (note: this disables the lockup detectors) the thread would erroneously use the value zero as the sample period. To avoid such races and to keep the /proc handler code consistent, call {get|put}_online_cpus() in proc_watchdog_common() {get|put}_online_cpus() in proc_watchdog_thresh() {get|put}_online_cpus() in proc_watchdog_cpumask() Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ulrich Obergfell authored
The lockup detector suspend/resume interface that was introduced by commit 8c073d27 ("watchdog: introduce watchdog_suspend() and watchdog_resume()") does not protect itself against races with CPU hotplug. Hence, theoretically it is possible that a new watchdog thread is started on a hotplugged CPU while the lockup detector is suspended, and the thread could thus interfere unexpectedly with the code that requested to suspend the lockup detector. Avoid the race by calling get_online_cpus() in lockup_detector_suspend() put_online_cpus() in lockup_detector_resume() Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Don Zickus authored
The only way to enable a hardlockup to panic the machine is to set 'nmi_watchdog=panic' on the kernel command line. This makes it awkward for end users and folks who want to run automate tests (like myself). Mimic the softlockup_panic knob and create a /proc/sys/kernel/hardlockup_panic knob. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jiri Kosina authored
In many cases of hardlockup reports, it's actually not possible to know why it triggered, because the CPU that got stuck is usually waiting on a resource (with IRQs disabled) in posession of some other CPU is holding. IOW, we are often looking at the stacktrace of the victim and not the actual offender. Introduce sysctl / cmdline parameter that makes it possible to have hardlockup detector perform all-CPU backtrace. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ulrich Obergfell authored
If kthread_park() returns an error, watchdog_park_threads() should not blindly 'roll back' the already parked threads to the unparked state. Instead leave it up to the callers to handle such errors appropriately in their context. For example, it is redundant to unpark the threads if the lockup detectors will soon be disabled by the callers anyway. Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ulrich Obergfell authored
lockup_detector_suspend() now handles errors from watchdog_park_threads(). Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ulrich Obergfell authored
update_watchdog_all_cpus() now passes errors from watchdog_park_threads() up to functions in the call chain. This allows watchdog_enable_all_cpus() and proc_watchdog_update() to handle such errors too. Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ulrich Obergfell authored
Move watchdog_disable_all_cpus() outside of the ifdef so that it is available if CONFIG_SYSCTL is not defined. This is preparation for "watchdog: implement error handling in update_watchdog_all_cpus() and callers". Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ulrich Obergfell authored
The original watchdog_park_threads() function that was introduced by commit 81a4beef ("watchdog: introduce watchdog_park_threads() and watchdog_unpark_threads()") takes a very simple approach to handle errors returned by kthread_park(): It attempts to roll back all watchdog threads to the unparked state. However, this may be undesired behaviour from the perspective of the caller which may want to handle errors as appropriate in its specific context. Currently, there are two possible call chains: - watchdog suspend/resume interface lockup_detector_suspend watchdog_park_threads - write to parameters in /proc/sys/kernel proc_watchdog_update watchdog_enable_all_cpus update_watchdog_all_cpus watchdog_park_threads Instead of 'blindly' attempting to unpark the watchdog threads if a kthread_park() call fails, the new approach is to disable the lockup detectors in the above call chains. Failure becomes visible to the user as follows: - error messages from lockup_detector_suspend() or watchdog_enable_all_cpus() - the state that can be read from /proc/sys/kernel/watchdog_enabled - the 'write' system call in the latter call chain returns an error I did not experience kthread_park() failures in practice, I used some instrumentation to fake error returns from kthread_park() in order to test the patches. This patch (of 5): Restore the previous value of watchdog_thresh _and_ sample_period if proc_watchdog_update() returns an error. The variables must be consistent to avoid false positives of the lockup detectors. Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yaowei Bai authored
Make is_hardlockup return bool to improve readability due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dominique Martinet authored
If the remote locking fail, we run a local vfs unlock that should work and return success to userland when we didn't actually lock at all. We need to tell the application that tried to lock that it didn't get it, not that all went well. Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Kirill A. Shutemov authored
Make struct callback_head aligned to size of pointer. On most architectures it happens naturally due ABI requirements, but some architectures (like CRIS) have weird ABI and we need to ask it explicitly. The alignment is required to guarantee that bits 0 and 1 of @next will be clear under normal conditions -- as long as we use call_rcu(), call_rcu_bh(), call_rcu_sched(), or call_srcu() to queue callback. This guarantee is important for few reasons: - future call_rcu_lazy() will make use of lower bits in the pointer; - the structure shares storage spacer in struct page with @compound_head, which encode PageTail() in bit 0. The guarantee is needed to avoid false-positive PageTail(). False postive PageTail() caused crash on crisv32[1]. It happend due misaligned task_struct->rcu, which was byte-aligned. [1] http://lkml.kernel.org/r/55FAEA67.9000102@roeck-us.netSigned-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joseph Qi authored
readahead_pages in ocfs2_duplicate_clusters_by_page is defined but not used, so clean it up. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joseph Qi authored
A node can mount multiple ocfs2 volumes. And if thread names are same for each volume/domain, it will bring inconvenience when analyzing problems because we have to identify which volume/domain the messages belong to. Since thread name will be printed to messages, so add volume uuid or dlm name to thread name can benefit problem analysis. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Gang He <ghe@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
alex chen authored
In ocfs2_mknod_locked if '__ocfs2_mknod_locke d' returns an error, we should reclaim the inode successfully claimed above, otherwise, the inode never be reused. The case is described below: ocfs2_mknod ocfs2_mknod_locked ocfs2_claim_new_inode Successfully claim the inode __ocfs2_mknod_locked ocfs2_journal_access_di Failed because of -ENOMEM or other reasons, the inode lockres has not been initialized yet. iput(inode) ocfs2_evict_inode ocfs2_delete_inode ocfs2_inode_lock ocfs2_inode_lock_full_nested __ocfs2_cluster_lock Return -EINVAL because of the inode lockres has not been initialized. So the following operations are not performed ocfs2_wipe_inode ocfs2_remove_inode ocfs2_free_dinode ocfs2_free_suballoc_bits Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joseph Qi authored
There is a race case between mount and delete node/cluster, which will lead o2hb_thread to malfunctioning dead loop. o2hb_thread { o2nm_depend_this_node(); <<<<<< race window, node may have already been deleted, and then enter the loop, o2hb thread will be malfunctioning because of no configured nodes found. while (!kthread_should_stop() && !reg->hr_unclean_stop && !reg->hr_aborted_start) { } So check the return value of o2nm_depend_this_node() is needed. If node has been deleted, do not enter the loop and let mount fail. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joseph Qi authored
We have no need to take inode mutex, rw and inode lock if it is not dio entry when recover orphans. Optimize it by adding a flag OCFS2_INODE_DIO_ORPHAN_ENTRY to ocfs2_inode_info to reduce contention. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joseph Qi authored
dio entry will only do truncate in case of ORPHAN_NEED_TRUNCATE. So do not include it when doing normal orphan scan to reduce contention. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joseph Qi authored
Currently cluster allocation is always trying to find a victim chain (a chian has most space), and this may lead to poor performance because of discontiguous allocation in some scenarios. Our test case is block size 4k, cluster size 1M and mount option with localalloc=2048 (2G), since a gd is 32256M (about 31.5G) and a localalloc window is only 2G, creating 50G file will result in 2G from gd0, 2G from gd1, ... One way to improve performance is enlarge localalloc window size (max 31104M), but this will make end user feel that about 30G is suddenly "missing", and localalloc currently do not support steal, which means one node cannot use another node's localalloc even it is not used in fact. So using the last gd to record the allocation and continues with the gd if it has enough space for a localalloc window can make the allocation as more contiguous as possible. Our test result is below (evaluated in IOPS), which is using iometer running in VM, dynamic vhd virtual disk stored in ocfs2. IO model Original After Improved(%) 16K60%Write100%Random 703 876 24.59% 8K90%Write100%Random 735 827 12.59% 4K100%Write100%Random 859 915 6.52% 4K100%Read100%Random 2092 2600 24.30% Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Tested-by: Norton Zhu <norton.zhu@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
jiangyiwen authored
A simplified test case is (this case from Ryan): 1) dd if=/dev/zero of=/mnt/hello bs=512 count=1 oflag=direct; 2) truncate /mnt/hello -s 2097152 file 'hello' is not exist before test. After this command, file 'hello' should be all zero. But 512~4096 is some random data. Setting bh state to new when get a new block, if so, direct_io_worker()->dio_zero_block() will fill-in the unused portion of the block with zero. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Norton.Zhu authored
If ocfs2_is_overwrite failed, ocfs2_direct_IO_write mays till return success to the caller. Signed-off-by: Norton.Zhu <norton.zhu@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sudip Mukherjee authored
fs/logfs/dev_bdev.c: In function '__bdev_writeseg': include/linux/kernel.h:601:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&_min1 == &_min2); \ fs/logfs/dev_bdev.c:84:14: note: in expansion of macro 'min' max_pages = min(nr_pages, BIO_MAX_PAGES); fs/logfs/dev_bdev.c: In function 'do_erase': include/linux/kernel.h:601:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&_min1 == &_min2); \ fs/logfs/dev_bdev.c:174:14: note: in expansion of macro 'min' max_pages = min(nr_pages, BIO_MAX_PAGES); Lets use min_t and mention the type. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Hansen authored
The comment here says that it is checking for invalid bits. But, the mask is *actually* checking to ensure that _any_ valid bit is set, which is quite different. Without this check, an unexpected bit could get set on an inotify object. Since these bits are also interpreted by the fsnotify/dnotify code, there is the potential for an object to be mishandled inside the kernel. For instance, can we be sure that setting the dnotify flag FS_DN_RENAME on an inotify watch is harmless? Add the actual check which was intended. Retain the existing inotify bits are being added to the watch. Plus, this is existing behavior which would be nice to preserve. I did a quick sniff test that inotify functions and that my 'inotify-tools' package passes 'make check'. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: John McCutchan <john@johnmccutchan.com> Cc: Robert Love <rlove@rlove.org> Cc: Eric Paris <eparis@parisplace.org> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Hansen authored
There was a report that my patch: inotify: actually check for invalid bits in sys_inotify_add_watch() broke CRIU. The reason is that CRIU looks up raw flags in /proc/$pid/fdinfo/* to figure out how to rebuild inotify watches and then passes those flags directly back in to the inotify API. One of those flags (FS_EVENT_ON_CHILD) is set in mark->mask, but is not part of the inotify API. It is used inside the kernel to _implement_ inotify but it is not and has never been part of the API. My patch above ensured that we only allow bits which are part of the API (IN_ALL_EVENTS). This broke CRIU. FS_EVENT_ON_CHILD is really internal to the kernel. It is set _anyway_ on all inotify marks. So, CRIU was really just trying to set a bit that was already set. This patch hides that bit from fdinfo. CRIU will not see the bit, not try to set it, and should work as before. We should not have been exposing this bit in the first place, so this is a good patch independent of the CRIU problem. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reported-by: Andrey Wagin <avagin@gmail.com> Acked-by: Andrey Vagin <avagin@openvz.org> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Eric Paris <eparis@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: John McCutchan <john@johnmccutchan.com> Cc: Robert Love <rlove@rlove.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 05 Nov, 2015 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver update for 4.4-rc1. Lots of different driver and subsystem updates, hwtracing being the largest with the addition of some new platforms that are now supported. Full details in the shortlog. All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (181 commits) fpga: socfpga: Fix check of return value of devm_request_irq lkdtm: fix ACCESS_USERSPACE test mcb: Destroy IDA on module unload mcb: Do not return zero on error path in mcb_pci_probe() mei: bus: set the device name before running fixup mei: bus: use correct lock ordering mei: Fix debugfs filename in error output char: ipmi: ipmi_ssif: Replace timeval with timespec64 fpga: zynq-fpga: Fix issue with drvdata being overwritten. fpga manager: remove unnecessary null pointer checks fpga manager: ensure lifetime with of_fpga_mgr_get fpga: zynq-fpga: Change fw format to handle bin instead of bit. fpga: zynq-fpga: Fix unbalanced clock handling misc: sram: partition base address belongs to __iomem space coresight: etm3x: adding documentation for sysFS's cpu interface vme: 8-bit status/id takes 256 values, not 255 fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000 ARM: zynq: dt: Updated devicetree for Zynq 7000 platform. ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager. ver_linux: proc/modules, limit text processing to 'sed' ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core updates from Greg KH: "Here's the "big" driver core updates for 4.4-rc1. Primarily a bunch of debugfs updates, with a smattering of minor driver core fixes and updates as well. All have been in linux-next for a long time" * tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: debugfs: Add debugfs_create_ulong() of: to support binding numa node to specified device in devicetree debugfs: Add read-only/write-only bool file ops debugfs: Add read-only/write-only size_t file ops debugfs: Add read-only/write-only x64 file ops debugfs: Consolidate file mode checks in debugfs_create_*() Revert "mm: Check if section present during memory block (un)registering" driver-core: platform: Provide helpers for multi-driver modules mm: Check if section present during memory block (un)registering devres: fix a for loop bounds check CMA: fix CONFIG_CMA_SIZE_MBYTES overflow in 64bit base/platform: assert that dev_pm_domain callbacks are called unconditionally sysfs: correctly handle short reads on PREALLOC attrs. base: soc: siplify ida usage kobject: move EXPORT_SYMBOL() macros next to corresponding definitions kobject: explain what kobject's sd field is debugfs: document that debugfs_remove*() accepts NULL and error values debugfs: Pass bool pointer to debugfs_create_bool() ACPI / EC: Fix broken 64bit big-endian users of 'global_lock'
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver updates from Greg KH: "Here's the big staging driver update for 4.4-rc1. If you were disappointed for 4.3-rc1 that we didn't contribute enough changesets, you should be happy with this pull request of over 2400 patches. But overall we removed more lines of code than we added, which is nice to see. Full details in the shortlog. All of these have been in linux-next for a while" Greg, I've never been disappointed in how few commits Staging contributes to the kernel.. Never. * tag 'staging-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (2431 commits) Staging: rtl8192u: ieee80211: added missing blank lines Staging: rtl8192u: ieee80211: removed unnecessary braces Staging: rtl8192u: ieee80211: corrected block comments Staging: rtl8192u: ieee80211: corrected indent Staging: rtl8192u: ieee80211: added missing spaces after if Staging: rtl8192u: ieee80211: added missing space around '=' Staging: rtl8192u: ieee80211: fixed position of else statements Staging: rtl8192u: ieee80211: fixed open brace positions staging: rdma: ipath: Remove unneeded vairable. staging: rtl8188eu: pwrGrpCnt variable removed in store_pwrindex_offset function staging: rtl8188eu: new variable for hal_data->MCSTxPowerLevelOriginalOffset[pwrGrpCnt] in store_pwrindex_offset function staging: rtl8188eu: checkpatch fixes: 'Avoid CamelCase' in hal/bb_cfg.c staging: rtl8188eu: checkpatch fixes: line over 80 characters splited into two parts staging: rtl8188eu: checkpatch fixes: alignment should match open parenthesis staging: rtl8188eu: checkpatch fixes: unnecessary parentheses removed in hal/bb_cfg.c staging: rtl8188eu: checkpatch fixes: spaces preferred around that '|' in hal/bb_cfg.c staging: rtl8188eu: operator = replaced by += in loop increment staging: rtl8188eu: occurrence of the 5 GHz code marked staging: rtl8188eu: increment placed into for loop header staging: rtl8188eu: while loop replaced by for loop in rtw_restruct_wmm_ie ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver updates from Greg KH: "Here is the big tty and serial driver update for 4.4-rc1. Lots of serial driver updates and a few small tty core changes. Full details in the shortlog. All of these have been in linux-next for a while" * tag 'tty-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (148 commits) tty: Use unbound workqueue for all input workers tty: Abstract tty buffer work tty: Prevent tty teardown during tty_write_message() tty: core: Use correct spinlock flavor in tiocspgrp() tty: Combine SIGTTOU/SIGTTIN handling serial: amba-pl011: fix incorrect integer size in pl011_fifo_to_tty() ttyFDC: Fix build problems due to use of module_{init,exit} tty: remove unneeded return statement serial: 8250_mid: add support for DMA engine handling from UART MMIO dmaengine: hsu: remove platform data dmaengine: hsu: introduce stubs for the exported functions dmaengine: hsu: make the UART driver in control of selecting this driver serial: fix mctrl helper functions serial: 8250_pci: Intel MID UART support to its own driver serial: fsl_lpuart: add earlycon support tty: disable unbind for old 74xx based serial/mpsc console port serial: pl011: Spelling s/clocks-names/clock-names/ n_tty: Remove reader wakeups for TTY_BREAK/TTY_PARITY chars tty: synclink, fix indentation serial: at91, fix rs485 properties ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB updates from Greg KH: "Here is the big USB patchset for 4.4-rc1. As usual, most of the changes are in the gadget subsystem, and we removed a host controller for a device that is no longer in existance, and probably never was even made public. There is also other minor driver updates and new device ids, full details in the changelog. All of these have been in linux-next for a while" * tag 'usb-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (233 commits) USB: core: Codestyle fix in urb.c usb: misc: usb3503: Use i2c_add_driver helper macro usb: host: lpc32xx: don't unregister phy device usb: host: lpc32xx: balance clk enable/disable on removal usb: host: lpc32xx: fix warnings caused by enabling unprepared clock uwb: drp: Use setup_timer uwb: neh: Use setup_timer uwb: rsv: Use setup_timer USB: qcserial: add Sierra Wireless MC74xx/EM74xx usb: chipidea: otg: don't wait vbus drops below BSV when starts host chipidea: ci_hdrc_pci: use PCI_VDEVICE() instead of PCI_DEVICE() doc: dt-binding: ci-hdrc-usb2: split vendor specific properties usb: chipidea: imx: add imx6ul usb support doc: dt-binding: ci-hdrc-usb2: improve property description usb: chipidea: imx: add usb support for imx7d Doc: usb: ci-hdrc-usb2: Add phy-clkgate-delay-us entry usb: chipidea: Add support for 'phy-clkgate-delay-us' property usb: chipidea: Use extcon framework for VBUS and ID detect usb: gadget: net2280: restore ep_cfg after defect7374 workaround usb: dwc2: host: Fix use after free w/ simultaneous irqs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper updates from Mike Snitzer: "Smaller set of DM changes for this merge. I've based these changes on Jens' for-4.4/reservations branch because the associated DM changes required it. - Revert a dm-multipath change that caused a regression for unprivledged users (e.g. kvm guests) that issued ioctls when a multipath device had no available paths. - Include Christoph's refactoring of DM's ioctl handling and add support for passing through persistent reservations with DM multipath. - All other changes are very simple cleanups" * tag 'dm-4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm switch: simplify conditional in alloc_region_table() dm delay: document that offsets are specified in sectors dm delay: capitalize the start of an delay_ctr() error message dm delay: Use DM_MAPIO macros instead of open-coded equivalents dm linear: remove redundant target name from error messages dm persistent data: eliminate unnecessary return values dm: eliminate unused "bioset" process for each bio-based DM device dm: convert ffs to __ffs dm: drop NULL test before kmem_cache_destroy() and mempool_destroy() dm: add support for passing through persistent reservations dm: refactor ioctl handling Revert "dm mpath: fix stalls when handling invalid ioctls" dm: initialize non-blk-mq queue data before queue is used
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md updates from Neil Brown: "Two major components to this update. 1) The clustered-raid1 support from SUSE is nearly complete. There are a few outstanding issues being worked on. Maybe half a dozen patches will bring this to a usable state. 2) The first stage of journalled-raid5 support from Facebook makes an appearance. With a journal device configured (typically NVRAM or SSD), the "RAID5 write hole" should be closed - a crash during degraded operations cannot result in data corruption. The next stage will be to use the journal as a write-behind cache so that latency can be reduced and in some cases throughput increased by performing more full-stripe writes. * tag 'md/4.4' of git://neil.brown.name/md: (66 commits) MD: when RAID journal is missing/faulty, block RESTART_ARRAY_RW MD: set journal disk ->raid_disk MD: kick out journal disk if it's not fresh raid5-cache: start raid5 readonly if journal is missing MD: add new bit to indicate raid array with journal raid5-cache: IO error handling raid5: journal disk can't be removed raid5-cache: add trim support for log MD: fix info output for journal disk raid5-cache: use bio chaining raid5-cache: small log->seq cleanup raid5-cache: new helper: r5_reserve_log_entry raid5-cache: inline r5l_alloc_io_unit into r5l_new_meta raid5-cache: take rdev->data_offset into account early on raid5-cache: refactor bio allocation raid5-cache: clean up r5l_get_meta raid5-cache: simplify state machine when caches flushes are not needed raid5-cache: factor out a helper to run all stripes for an I/O unit raid5-cache: rename flushed_ios to finished_ios raid5-cache: free I/O units earlier ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block reservation support from Jens Axboe: "This adds support for persistent reservations, both at the core level, as well as for sd and NVMe" [ Background from the docs: "Persistent Reservations allow restricting access to block devices to specific initiators in a shared storage setup. All implementations are expected to ensure the reservations survive a power loss and cover all connections in a multi path environment" ] * 'for-4.4/reservations' of git://git.kernel.dk/linux-block: NVMe: Precedence error in nvme_pr_clear() nvme: add missing endianess annotations in nvme_pr_command NVMe: Add persistent reservation ops sd: implement the Persistent Reservation API block: add an API for Persistent Reservations block: cleanup blkdev_ioctl
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block integrity updates from Jens Axboe: ""This is the joint work of Dan and Martin, cleaning up and improving the support for block data integrity" * 'for-4.4/integrity' of git://git.kernel.dk/linux-block: block, libnvdimm, nvme: provide a built-in blk_integrity nop profile block: blk_flush_integrity() for bio-based drivers block: move blk_integrity to request_queue block: generic request_queue reference counting nvme: suspend i/o during runtime blk_integrity_unregister md: suspend i/o during runtime blk_integrity_unregister md, dm, scsi, nvme, libnvdimm: drop blk_integrity_unregister() at shutdown block: Inline blk_integrity in struct gendisk block: Export integrity data interval size in sysfs block: Reduce the size of struct blk_integrity block: Consolidate static integrity profile properties block: Move integrity kobject to struct gendisk
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull lightnvm support from Jens Axboe: "This adds support for lightnvm, and adds support to NVMe as well. This is pretty exciting, in that it enables new and interesting use cases for compatible flash devices. There's a LWN writeup about an earlier posting here: https://lwn.net/Articles/641247/ This has been underway for a while, and should be ready for merging at this point" * 'for-4.4/lightnvm' of git://git.kernel.dk/linux-block: nvme: lightnvm: clean up a data type lightnvm: refactor phys addrs type to u64 nvme: LightNVM support rrpc: Round-robin sector target with cost-based gc gennvm: Generic NVM manager lightnvm: Support for Open-Channel SSDs
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block driver updates from Jens Axboe: "Here are the block driver changes for 4.4. This pull request contains: - NVMe: - Refactor and moving of code to prepare for proper target support. From Christoph and Jay. - 32-bit nvme warning fix from Arnd. - Error initialization fix from me. - Proper namespace removal and reference counting support from Keith. - Device resume fix on IO failure, also from Keith. - Dependency fix from Keith, now that nvme isn't under the umbrella of the block anymore. - Target location and maintainers update from Jay. - From Ming Lei, the long awaited DIO/AIO support for loop. - Enable BD-RE writeable opens, from Georgios" * 'for-4.4/drivers' of git://git.kernel.dk/linux-block: (24 commits) Update target repo for nvme patch contributions NVMe: initialize error to '0' nvme: use an integer value to Linux errno values nvme: fix 32-bit build warning NVMe: Add explicit block config dependency nvme: include <linux/types.ĥ> in <linux/nvme.h> nvme: move to a new drivers/nvme/host directory nvme.h: add missing nvme_id_ctrl endianess annotations nvme: move hardware structures out of the uapi version of nvme.h nvme: add a local nvme.h header nvme: properly handle partially initialized queues in nvme_create_io_queues nvme: merge nvme_dev_start, nvme_dev_resume and nvme_async_probe nvme: factor reset code into a common helper nvme: merge nvme_dev_reset into nvme_reset_failed_dev nvme: delete dev from dev_list in nvme_reset NVMe: Simplify device resume on io queue failure NVMe: Namespace removal simplifications NVMe: Reference count open namespaces cdrom: Random writing support for BD-RE media block: loop: support DIO & AIO ...
-