- 25 Nov, 2022 18 commits
-
-
David S. Miller authored
Horatiu Vultur says: ==================== net: lan966x: Extend xdp support Extend the current support of XDP in lan966x with the action XDP_TX and XDP_REDIRECT. The first patches just prepare the things such that it would be easier to add XDP_TX and XDP_REDIRECT actions. Like adding XDP_PACKET_HEADROOM, introduce helper functions, use the correct dma_dir for the page pool The last 2 patches introduce the XDP actions XDP_TX and XDP_REDIRECT. v4->v5: - add iterator declaration inside for loops - move the scope of port inside the function lan966x_fdma_rx_alloc_page_pool - create union for skb and xdpf inside struct lan966x_tx_dcb_buf v3->v4: - use napi_consume_skb instead of dev_kfree_skb_any - arrange members in struct lan966x_tx_dcb_buf not to have holes - fix when xdp program is added the check for determining if page pool needs to be recreated was wrong - change type for len in lan966x_tx_dcb_buf to u32 v2->v3: - make sure to update rxq memory model - update the page pool direction if there is any xdp program - in case of action XDP_TX give back to reuse the page - in case of action XDP_REDIRECT, remap the frame and make sure to unmap it when is transmitted. v1->v2: - use skb_reserve of using skb_put and skb_pull - make sure that data_len doesn't include XDP_PACKET_HEADROOM ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Horatiu Vultur authored
Extend lan966x XDP support with the action XDP_REDIRECT. This is similar with the XDP_TX, so a lot of functionality can be reused. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
-
Horatiu Vultur authored
Extend lan966x XDP support with the action XDP_TX. In this case when the received buffer needs to execute XDP_TX, the buffer will be moved to the TX buffers. So a new RX buffer will be allocated. When the TX finish with the frame, it would give back the buffer to the page pool. Signed-off-by:
-
Horatiu Vultur authored
To add support for XDP_TX it is required to be able to write to the DMA area therefore it is required that the pages will be mapped using DMA_BIDIRECTIONAL flag. Therefore check if there are any xdp programs on the interfaces and in that case set DMA_BIDRECTIONAL otherwise use DMA_FROM_DEVICE. Therefore when a new XDP program is added it is required to redo the page_pool. Signed-off-by:
-
Horatiu Vultur authored
By default the rxq memory model is MEM_TYPE_PAGE_SHARED but to be able to reuse pages on the TX side, when the XDP action XDP_TX it is required to update the memory model to PAGE_POOL. Signed-off-by:
-
Horatiu Vultur authored
Currently when a frame was transmitted, it is required to unamp the frame that was transmitted. The length of the frame was taken from the transmitted skb. In the future we might not have an skb, therefore store the length skb directly in the lan966x_tx_dcb_buf and use this one to unamp the frame. While at this, also arrange the members in lan966x_tx_dcb_buf not to have any holes. Signed-off-by:
-
Horatiu Vultur authored
Introduce lan966x_fdma_tx_setup_dcb and lan966x_fdma_tx_start functions and use of them inside lan966x_fdma_xmit. There is no functional change in here. They are introduced to be used when XDP_TX/REDIRECT actions are introduced. Signed-off-by:
-
Horatiu Vultur authored
Update the page_pool params to allocate XDP_PACKET_HEADROOM space as headroom for all received frames. This is needed for when the XDP_TX and XDP_REDIRECT are implemented. Signed-off-by:
-
Min Li authored
PEROUT_ENABLE_OUTPUT_MASK was there to allow us to enable/disable all the perout pins. But it is not standard procedure, we will have to discard it. Signed-off-by:
Min Li <min.li.xe@renesas.com> Signed-off-by:
-
Min Li authored
82P33 family of chips can trigger TOD read/write by external signal from one of the IN12/13/14 pins, which are set user space programs by calling PTP_PIN_SETFUNC through ptp_ioctl Signed-off-by:
-
David S. Miller authored
Steen Hegelund says: ==================== net: TC protocol all support in Sparx5 IS2 VCAP This provides support for the TC flower filters 'protocol all' clause in the Sparx5 IS2 VCAP. It builds on top of the initial IS2 VCAP support found in these series: https://lore.kernel.org/all/20221020130904.1215072-1-steen.hegelund@microchip.com/ https://lore.kernel.org/all/20221109114116.3612477-1-steen.hegelund@microchip.com/ https://lore.kernel.org/all/20221111130519.1459549-1-steen.hegelund@microchip.com/ https://lore.kernel.org/all/20221117213114.699375-1-steen.hegelund@microchip.com/ Functionality: ============== As the configuration for the Sparx5 IS2 VCAP consists of one (or more) keyset(s) for each lookup/port per traffic classification, it is not always possible to cover all protocols with just one ordinary VCAP rule. To improve this situation the driver will try to find out what keysets a rule will need to cover a TC flower "protocol all" filter and then compare this set of keysets to what the hardware is currently configured for. In case multiple keysets are needed then the driver can create a rule per rule size (e.g. X6 and X12) and use a mask on the keyset type field to allow the VCAP to match more than one keyset with just one rule. This is possible because the keysets that have the same size typically has many keys in common, so the VCAP rule keys can make a common match. The result is that one TC filter command may create multiple IS2 VCAP rules of different sizes that have a type field with a masked type id. Delivery: ========= This is current plan for delivering the full VCAP feature set of Sparx5: - Sparx5 IS0 VCAP support - TC policer and drop action support (depends on the Sparx5 QoS support upstreamed separately) - Sparx5 ES0 VCAP support - TC flower template support - TC matchall filter support for mirroring and policing ports - TC flower filter mirror action support - Sparx5 ES2 VCAP support Version History: ================ v2 Fixed a NULL return value compiler warning. Moved the new vcap_find_actionfield function a bit up in the file. v1 Initial version ==================== Signed-off-by:
-
Steen Hegelund authored
This tests the filtering of keys, either dropping unsupported keys or dropping keys specified in a list. Signed-off-by:
Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by:
-
Steen Hegelund authored
This will display a list of keyset in case the type_id field in the VCAP rule has been wildcarded. Signed-off-by:
-
Steen Hegelund authored
This allows support of TC protocol all for the Sparx5 IS2 VCAP. This is done by creating multiple rules that covers the rule size and traffic types in the IS2. Each rule size (e.g X16 and X6) may have multiple keysets and if there are more than one the type field in the VCAP rule will be wildcarded to support these keysets. Signed-off-by:
-
Steen Hegelund authored
This adds support for making a copy of a rule and modify keys and actions to differentiate the copy. Signed-off-by:
-
Jiapeng Chong authored
Variable 'insert_retries' is not effectively used in the function, so delete it. lib/test_rhashtable.c:437:18: warning: variable 'insert_retries' set but not used. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3242Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Xu Panda authored
Replace the open-code with sysfs_streq(). Signed-off-by:
Xu Panda <xu.panda@zte.com.cn> Signed-off-by:
Yang Yang <yang.yang29@zte.com> Signed-off-by:
-
Frank authored
We added patch for motorcomm.c to support YT8531S. This patch has been tested on AM335x platform which has one YT8531S interface card and passed all test cases. The tested cases indluding: YT8531S UTP function with support of 10M/100M/1000M; YT8531S Fiber function with support of 100M/1000M; and YT8531S Combo function that supports auto detection of media type. Since most functions of YT8531S are similar to YT8521 and we reuse some codes for YT8521 in the patch file. Signed-off-by:
Frank <Frank.Sae@motor-comm.com> Signed-off-by:
-
- 24 Nov, 2022 5 commits
-
-
Stanislav Fomichev authored
For the cases where 'reason' doesn't give any clue, it's still nice to be able to track the kfree_skb caller location. %p doesn't help much so let's use %pS which prints the symbol+offset. Signed-off-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20221123040947.1015721-1-sdf@google.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
Jonathan Toppins says: ==================== bonding: fix bond recovery in mode 2 When a bond is configured with a non-zero updelay and in mode 2 the bond never recovers after all slaves lose link. The first patch adds selftests that demonstrate the issue and the second patch fixes the issue by ignoring the updelay when there are no usable slaves. ==================== Link: https://lore.kernel.org/r/cover.1669147951.git.jtoppins@redhat.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jonathan Toppins authored
Before this change when a bond in mode 2 lost link, all of its slaves lost link, the bonding device would never recover even after the expiration of updelay. This change removes the updelay when the bond currently has no usable links. Conforming to bonding.txt section 13.1 paragraph 4. Fixes: 41f89100 ("bonding: ignore updelay param when there is no active slave") Signed-off-by:
Jonathan Toppins <jtoppins@redhat.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Jonathan Toppins authored
Verify when a bond is configured with {up,down}delay and the link state of slave members flaps if there are no remaining members up the bond should immediately select a member to bring up. (from bonding.txt section 13.1 paragraph 4) Suggested-by:Liang Li <liali@redhat.com> Signed-off-by:
-
Maxim Korotkov authored
The value of an arithmetic expression "n * id.data" is subject to possible overflow due to a failure to cast operands to a larger data type before performing arithmetic. Used macro for multiplication instead operator for avoiding overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Maxim Korotkov <korotkov.maxim.s@gmail.com> Reviewed-by:
Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221122122901.22294-1-korotkov.maxim.s@gmail.comSigned-off-by:
-
- 23 Nov, 2022 17 commits
-
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== net: Complete conversion to i2c_probe_new Reposting for Uwe the networking slice of his mega-series: https://lore.kernel.org/all/20221118224540.619276-1-uwe@kleine-koenig.org/ so that our build bot can confirm the obvious. fix mlx5 -> mlxsw while at it. ==================== Link: https://lore.kernel.org/r/20221123045507.2091409-1-kuba@kernel.orgSigned-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Edward Cree authored
In the case of invalid or corrupted v2 counter update packets, efx_tc_rx_version_2() returns EFX_TC_COUNTER_TYPE_MAX. In this case we should not attempt to update generation counts as this will write beyond the end of the seen_gen array. Reported-by:
coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1527356 ("Memory - illegal accesses") Fixes: 25730d8b ("sfc: add extra RX channel to receive MAE counter updates on ef100") Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Stanislav Fomichev authored
Syzkaller triggered flow dissector warning with the following: r0 = openat$ppp(0xffffffffffffff9c, &(0x7f0000000000), 0xc0802, 0x0) ioctl$PPPIOCNEWUNIT(r0, 0xc004743e, &(0x7f00000000c0)) ioctl$PPPIOCSACTIVE(r0, 0x40107446, &(0x7f0000000240)={0x2, &(0x7f0000000180)=[{0x20, 0x0, 0x0, 0xfffff034}, {0x6}]}) pwritev(r0, &(0x7f0000000040)=[{&(0x7f0000000140)='\x00!', 0x2}], 0x1, 0x0, 0x0) [ 9.485814] WARNING: CPU: 3 PID: 329 at net/core/flow_dissector.c:1016 __skb_flow_dissect+0x1ee0/0x1fa0 [ 9.485929] skb_get_poff+0x53/0xa0 [ 9.485937] bpf_skb_get_pay_offset+0xe/0x20 [ 9.485944] ? ppp_send_frame+0xc2/0x5b0 [ 9.485949] ? _raw_spin_unlock_irqrestore+0x40/0x60 [ 9.485958] ? __ppp_xmit_process+0x7a/0xe0 [ 9.485968] ? ppp_xmit_process+0x5b/0xb0 [ 9.485974] ? ppp_write+0x12a/0x190 [ 9.485981] ? do_iter_write+0x18e/0x2d0 [ 9.485987] ? __import_iovec+0x30/0x130 [ 9.485997] ? do_pwritev+0x1b6/0x240 [ 9.486016] ? trace_hardirqs_on+0x47/0x50 [ 9.486023] ? __x64_sys_pwritev+0x24/0x30 [ 9.486026] ? do_syscall_64+0x3d/0x80 [ 9.486031] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd Flow dissector tries to find skb net namespace either via device or via socket. Neigher is set in ppp_send_frame, so let's manually use ppp->dev. Cc: Paul Mackerras <paulus@samba.org> Cc: linux-ppp@vger.kernel.org Reported-by: syzbot+41cab52ab62ee99ed24a@syzkaller.appspotmail.com Signed-off-by: -
Bagas Sanjaya authored
kernel test robot reported indentation warnings: Documentation/networking/devlink/devlink-port.rst:220: WARNING: Unexpected indentation. Documentation/networking/devlink/devlink-port.rst:222: WARNING: Block quote ends without a blank line; unexpected unindent. These warnings cause lists (arbitration flow for which the warnings blame to and 3-step subfunction setup) to be rendered inline instead. Also, for the former list, automatic list numbering is messed up. Fix these warnings by adding missing blank line padding. Link: https://lore.kernel.org/linux-doc/202211200926.kfOPiVti-lkp@intel.com/ Fixes: 242dd643 ("Documentation: Add documentation for new devlink-rate attributes") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
Heng Qi says: ==================== Revert "veth: Avoid drop packets when xdp_redirect performs" and its fix This patch 2e0de636 enables napi of the peer veth automatically when the veth loads the xdp, but it breaks down as reported by Paolo and John. So reverting it and its fix, we will rework the patch and make it more robust based on comments. ==================== Link: https://lore.kernel.org/r/20221122035015.19296-1-hengqi@linux.alibaba.comSigned-off-by:
-
