From: Andy Whitcroft <apw@shadowen.org>

There's a spot in i2o where we deliberately leak some memory when the
hardware plays up.  The alternative is to let the hardware scribble on it at
some unknown time in the future.

Things like the Stanford checker keep alleging that this is a bug.  So shut
them up with a comment

All we're doing in there is writing things into the inode.  I see no need for
the lock_kernel().

And holding lock_kernel() across mark_inode_dirty() hurts on big SMP.

From: Andi Kleen <ak@suse.de>

The logic is: the global variable is set to the magic value
IRQBALANCE_CHECK_ARCH.  It can be overwritten by a __setup function.  If
the magic value is still set when the irq balancer is started it asks the
subarchitecture using the NO_BALANCE_IRQ macro.  This is defined to a
genapic field in the generic architecture, otherwise constant.  Then the
global variable is set and when it is true no balancing happens.

Previously I had this wrong in that it always disabled it.

This part should be correct, but it still doesn't seem to work.

(I left the printk in there until the problem is debugged, could be removed
of course)

From: Hollis Blanchard <hollis@austin.ibm.com>

Fix a user pointer deref, found by the Stanford checker.

From: Manfred Spraul <manfred@colorfullife.com>

three build fixes for CONFIG_PROC_FS=n:

include/linux/procfs.h:

 - add missing proc_pid_unhash, proc_pid_flush declarations.  static
   inline functions that do nothing.

 - move semicolons around for kclist_{add,del}.  gcc-3.2.2 doesn't like
   the current syntax.

drivers/net/pppoe.c:

 - proc_net doesn't exist if CONFIG_PROC_FS=n.

drivers/scsi/scsi_priv.h:

 - add missing brackets to macro definition.

From: Andrey Panin <pazke@donpac.ru>

This small patch (against 2.5.70) updates visws_apic.c in accordance
with linux irq handling changes.

From: Jan Marek <linux@hazard.jcu.cz>

The DRM modules (i810) need this symbol.

As this is a special-case for one particular in-kernel module I changed Jan's
patch from EXPORT_SYMBOL to EXPORT_SYMBOL_GPL.

From: Milton Miller <miltonm@bga.com>

mm is NULL for kernel threads without their own context.  active_mm is
maintained the one we lazly switch from.

Without this patch, apm bios initiated suspend events (eg panel close)
cause an oops on resume in the LDT restore, killing kapmd, which causes
further events to not be polled.

From: Pavel Machek <pavel@ucw.cz>

This fixes suspend when pccards are used...

We want an "|" in there, not "||".

The m68knommu/pilot startup code is not copying the init segment to
RAM currently. Fix it to copy all of the data and init sections to RAM.

Support pre-configured boot arguments on m68knommu/5206e targets.

Support pre-configured boot arguments on m68knommu/5206 targets.

Make the ROMfs copy in the startup code for ARNEWSH/5260 board
conditional on actually using a ROMfs setup.

(i.e. the better fix)

into redhat.com:/garz/repo/net-drivers-2.5

The needed fix winds up breaking SG, checksumming, and other stuff
in the process.

Ouch.

* Dynamic interrupt coalescing
* mii lib support
* dynamic IPG support (disabled by default)
* jumbo frame fix
* vlan fix
* rx irq coalescing fix

More K&R to ANSI C conversions for lib/zlib_deflate.

Here are some more K&R to ANSI C conversions.

into home.transmeta.com:/home/torvalds/v2.5/linux

Linker script updates for m68knommu architecture:

 - fix _ramend for DragonEngine2 board
 - add  security init call support

Clean up the dodgy is_in_rom() code for m68knommu targets.

Now that all the m68knommu sub-architectures (68x328, 68360
and ColdFire) have the same memory setup support we can
make this code the same for all targets.

Change the m68knommu specific calls to do_fork() to match
its pid return vlue.

 - Unrevert strncpy->strlcpy change in JEDEC chip driver
 - Fix partition handling in physmap map driver
 - Switch sa1100-flash map driver back to rmk's version.

into infradead.org:/inst/bk/linus-2.5

into redhat.com:/garz/repo/net-drivers-2.5

in 8139too and pci-skeleton drivers.

* use pci_{request,release}_regions for PCI devices
* use alloc_etherdev (fixes race)
* propagate error returns from pci_xxx function errors

sys_wait4 can return a pid and in this case we want to copy the struct
rusage out to userspace.

This updates the orinoco driver, fixing many bugs and adding some minor
features.  It also adds a new module, orinoco_tmd for devices based on
the TMD7168 PCI<->PCMCIA adaptor.

into nuts.ninka.net:/home/davem/src/BK/net-2.5

Bug discovered by Mandred Spraul.

into home.transmeta.com:/home/torvalds/v2.5/linux