- 29 Jun, 2006 8 commits
-
-
Russell King authored
On some CPUs, bit 4 of section mappings means "update the cache when written to". On others, this bit is required to be one, and others it's required to be zero. Finally, on ARMv6 and above, setting it turns on "no execute" and prevents speculative prefetches. With all these combinations, no one value fits all CPUs, so we have to pick a value depending on the CPU type, and the area we're mapping. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Jürgen Schindele authored
Patch from Jrgen Schindele This patch adds support for Trizeps4 SoM and ConXS-evalboard from "Keith und Koep" This DIMM-module is based on PXA270. Signed-off-by: Jrgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
* master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-upstream: (26 commits) ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE ARM: OMAP: Update dmtimers ARM: OMAP: Make clock variables static ARM: OMAP: Fix GPMC compilation when DEBUG is defined ARM: OMAP: Mux updates for external DMA and GPIO ARM: OMAP: Add OMAP_TAG_CAMERA_SENSOR ARM: OMAP: Add initial 24xx suspend support ARM: OMAP: Update cpufreq support for 24xx ARM: OMAP: Add GPMC support for OMAP2 ARM: OMAP: Fix DMA channel irq handling for omap24xx ARM: OMAP: OMAP2 DMA burst support ARM: OMAP: Fix 32 kHz timer and modify GP timer to use GPT1 ARM: OMAP: Port dmtimers to OMAP2 and implement PWM support ARM: OMAP: Correct two bugs in arch/arm/mach-omap2/clock.c ARM: OMAP: Register the 24xx McSPI device ARM: OMAP: Add bitbank SPI driver for Innovator 1510 touchscreen ARM: OMAP: Aic23 alsa platform driver code for board-innovator ARM: OMAP: Fix GPIO IRQ mask handling ARM: OMAP: DMA transfer parameter configuration fix ...
-
Andrew Victor authored
Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9302, an evaluation board based on the Cirrus Logic EP9302 SoC, with 32M RAM, one USB host port, audio in/out, two serial ports and a 10/100 ethernet interface. George Kashperko submitted the original patch, this patch is a rewrite using the newer physmap platform driver. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek The bootloader on the LogicPD PXA270 platform informs the kernel of which type of TFT screen is connected via an lcd=$FOO kernel command line parameter. Before this patch, we ignored this parameter and just hardcoded the use of the Sharp lq64d343 display kit. This patch implement parsing of the command line option, and chooses the right pxafb_mach_info to use (six choices) based on this command line option. Also fix the fb settings to correspond with those of the bootloader. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
The "id(wb)BRR" suffix reports which CPU debugging options were (or were not) selected at kernel build time. Rather than have every proc-*.S file implement this, report the control register value, from which this information can be deduced. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Linus Torvalds authored
The recent vsnprintf() fix introduced an off-by-one, and it's now possible to overrun the target buffer by one byte. The "end" pointer points to past the end of the buffer, so if we have to truncate the result, it needs to be done though "end[-1]". [ This is just an alternate and simpler patch to one proposed by Andrew and Jeremy, who actually noticed the problem ] Acked-by: Andrew Morton <akpm@osdl.org> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 28 Jun, 2006 32 commits
-
-
Linus Torvalds authored
* 'nommu' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] nommu: backtrace code must not reference a discarded section [ARM] nommu: Initial uCLinux support for MMU-based CPUs [ARM] nommu: prevent Xscale-based machines being selected [ARM] nommu: export flush_dcache_page() [ARM] nommu: remove fault-armv, mmap and mm-armv files from nommu build [ARM] Remove TABLE_SIZE, and several unused function prototypes [ARM] nommu: Provide a simple flush_dcache_page implementation [ARM] nommu: add arch/arm/Kconfig-nommu to Kconfig files [ARM] nommu: add stubs for ioremap and friends [ARM] nommu: avoid selecting TLB and CPU specific copy code [ARM] nommu: uaccess tweaks [ARM] nommu: adjust headers for !MMU ARM systems [ARM] nommu: we need the TLS register emulation for nommu mode
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3672/1: PXA: don't probe output GPIOs for interrupt [ARM] 3671/1: ep93xx: add cirrus logic edb9315 support [ARM] 3370/2: ep93xx: add crunch support [ARM] 3665/1: crunch: add ptrace support [ARM] 3664/1: crunch: add signal frame save/restore [ARM] 3663/1: fix resource->end off-by-one thinko during physmap conversion [ARM] 3662/1: ixp23xx: don't include asm/hardware.h in uncompress.h [ARM] 3660/1: Remove legacy defines [ARM] 3661/1: S3C2412: Fix compilation if CPU_S3C2410 only [ARM] 3658/1: S3C244X: Change usb-gadget name to s3c2440-usbgadget [ARM] Remove the __arch_* layer from uaccess.h
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] Documentation/watchdog update [WATCHDOG] convert AT91RM9200 watchdog to platform driver [WATCHDOG] add WDIOC_GETTIMELEFT ioctl [WATCHDOG] Pre-Timeout flags
-
Thomas Gleixner authored
plist.h uses container_of, which is defined in kernel.h. Include kernel.h in plist.h as the kernel.h include does not longer happen automatically on all architectures. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
David Brownell authored
This patch adds earlier initialization of spi_device.mode, as needed on boards using nondefault chipselect polarity. An example would be ones using the RS5C348 RTC without an external signal inverter between the RTC chipselect and the SPI controller. Without this mechanism, the first setup() call for that chip would wrongly enable chips, corrupting transfers to/from other chips sharing that SPI bus. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: Input: db9 - fix potential buffer overrun Input: atkbd - fix hardware autorepeat Input: wistron - add mapping for Wistron MS 2111
-
Greg Ungerer authored
Remove the hard coded ROM region setups. Use Kconfig options to specify these in a generic way for platorms that want them. This builds on top of the other recent m68knommu linker script changes to completely remove fixed board configurations. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Use Kconfig options to setup the optional ROM region used on some platforms. We used to define this in the linker script on a per board basis. The configure options are more flexible and clean up the linker script a lot. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Fix 68EZ328/config.c asm to be clean for new gcc versions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Fix 68VZ328/config.c asm to be clean for new gcc versions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Fix 68360/config.c asm to be clean for new gcc versions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
The irqnode_t struct has moved to irqnode.h, need to include that 68360 ints.c. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Fix clobber list in uCsimm/uCdimm boot load helper asm. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Conditionaly compile the 68328 romvec code based on the ROM configuration being enabled. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Remove the inline 68328 romvec section asm code into its own file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Clean out the 68328serial driver: . remove use of cli/sti . fix usage of tty_* calls . remove unused variables Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Create the 68328 romvec section in its own assembler file. It can be compiled in when required. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64-SGI] fix prom revision checks in SN kernel [IA64] tiger_defconfig s/NR_CPUS=4/NR_CPUS=16/ [IA64-SGI] - Pass OS logical cpu number to the SN prom (bios) [IA64] palinfo.c: s/register_cpu_notifier/register_hotcpu_notifier/
-
Andrew Morton authored
WARNING: "unset_nmi_callback" [arch/x86_64/oprofile/oprofile.ko] undefined! WARNING: "set_nmi_callback" [arch/x86_64/oprofile/oprofile.ko] undefined! Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Alan Cox authored
Signed-off-by: Alan Cox <alan@redhat.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Alan Cox authored
Also sets the new fifo flag so that we don't hang on some errors with this chipset. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Alan Cox authored
Move auto arrays to static (const). Clean up using PCI_DEVICE in places, remove unreachable junk and dead code. Fix the serverworks cable detect logic (if ordering is wrong). Backport from libata. Plenty of scope for more cleanup left. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Alan Cox authored
If the controller FIFO cleared automatically on error we must not try and drain it as this will hang some chips. Based in concept on a broken patch from -mm some while back Signed-off-by: Alan Cox <alan@redhat.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Alan Cox authored
Kill a pair of long escaped debug printk calls Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Alan Cox authored
Remove all the ifdef preparation for enhanced features that never occcurred and is only in libata. For the SATA chips (but not yet PATA ones) politely suggest to the user that libata may offer more features. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Sergei Shtylylov <sshtylyov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Alan Cox authored
This is based on the proposed patches flying around but also checks that the device in question is new enough to have word 93 rather thanb blindly assuming word 93 == 0 means SATA (see ATA-5, ATA-7) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Randy Dunlap authored
Make a 1-bit field unsigned like all of the others near it. sound/oss/via82cxxx_audio.c:311:21: error: dubious one-bit signed bitfield Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Randy Dunlap authored
Make a 1-bit bitfield unsigned (no space for sign bit). Removes 24 sparse warnings from this one file: include/linux/ac97_codec.h:262:13: error: dubious one-bit signed bitfield Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Randy Dunlap authored
Fix section mismatch: adds __init to probe function, frees some init memory, not critical. WARNING: sound/oss/cs4232.o - Section mismatch: reference to .init.text: from .text after 'cs4232_pnp_probe' (at offset 0x152) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Michael Hanselmann authored
Fix a erroneous calculation of the legacy brightness values as reported by Paul Collins. Additionally, it moves the calculation of the negative value in the radeonfb driver after the value check. Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Paul Collins <paul@briny.ondioline.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Corey Minyard authored
Modify the watchdog timeout in IPMI to only do things at panic/reboot time if the watchdog timer was already running. Some BIOSes do not disable the watchdog timer at startup, and this led to a reboot a while later if the new OS running didn't start monitoring the watchdog, even if the watchdog was not running before. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Corey Minyard authored
There was some old high-res-timer code in the IPMI driver that is dead. Remove it. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-