- 18 Mar, 2023 4 commits
-
-
William Breathitt Gray authored
The regmap API supports IO port accessors so we can take advantage of regmap abstractions rather than handling access to the device registers directly in the driver. Includes trivial header inclusion tidy up. Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/20230311140218.74920-1-william.gray@linaro.orgSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Uwe Kleine-König authored
Make use of devm_clk_get_enabled() to replace some code that effectively open codes this new function. To retain ordering move the request to a place that is executed later. This way the time of enable keeps the same. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230313185333.2776785-1-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Cheng Ziqiu authored
From the comment of platform_get_irq(), it only returns non-zero IRQ number and negative error number, other than zero. Fix this by removing the if condition. Signed-off-by:
Cheng Ziqiu <chengziqiu@hust.edu.cn> Reviewed-by:
Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230314070130.60581-1-chengziqiu@hust.edu.cnSigned-off-by:
-
Kasumov Ruslan authored
The left side of the loop condition never becomes false. hwchan cannot be NULL, because it points to elements of the hw_channels array that takes one of 4 predefined values: pm8018_xoadc_channels, pm8038_xoadc_channels, pm8058_xoadc_channels, pm8921_xoadc_channels. Found by Linux Verification Center (linuxtesting.org) with SVACE. Reviewed-by:
Andi Shyti <andi.shyti@kernel.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Kasumov Ruslan <s02210418@gse.cs.msu.ru> Link: https://lore.kernel.org/r/20230315135114.22684-1-xhxgldhlpfy@gmail.comSigned-off-by:
-
- 12 Mar, 2023 10 commits
-
-
Tom Rix authored
smatch reports several warnings drivers/iio/adc/stm32-adc.c:2591:20: warning: symbol 'stm32_adc_min_ts_h7' was not declared. Should it be static? drivers/iio/adc/stm32-adc.c:2610:20: warning: symbol 'stm32_adc_min_ts_mp1' was not declared. Should it be static? drivers/iio/adc/stm32-adc.c:2630:20: warning: symbol 'stm32_adc_min_ts_mp13' was not declared. Should it be static? These variables are only used in stm32-adc.c, so they should be static Signed-off-by:
Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230312161733.470617-1-trix@redhat.comSigned-off-by:
-
Krzysztof Kozlowski authored
Always reference acpi_device_id and of_device_id tables, as they is little benefit of conditional compiling and OF table could be used also for ACPI matching via PRP0001. This fixes warning: drivers/iio/proximity/sx9500.c:1039:34: error: ‘sx9500_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230312153429.371702-3-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The driver currently matches only via i2c_device_id, but also has of_device_id table: drivers/iio/light/max44009.c:545:34: error: ‘max44009_of_match’ defined but not used [-Werror=unused-const-variable=] Fixes: 6aef699a ("iio: light: add driver for MAX44009") Signed-off-by:
-
Lorenzo Bianconi authored
Add device bindings for asm330lhb IMU sensor. Use asm330lhh as fallback device for asm330lhb since it implements all the features currently supported by asm330lhb. Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Acked-by:
-
Lorenzo Bianconi authored
Add support to STM ASM330LHB (acc + gyro) automotive Mems sensor. The ASM330LHB sensor can use ASM330LHH as fallback device since it implements all the ASM330LHB features currently implemented in st_lsm6dsx. Datasheet: https://www.st.com/resource/en/datasheet/asm330lhb.pdfSigned-off-by:
-
Rasmus Villemoes authored
Currently, the driver handles CH_FUNC_CURRENT_INPUT_LOOP_POWER and CH_FUNC_CURRENT_INPUT_EXT_POWER completely identically. But that's not correct. In order for CH_FUNC_CURRENT_INPUT_LOOP_POWER to work, two changes must be made: (1) expose access to the DAC_CODE_x register so that the intended output current can be set, i.e. expose the channel as both current output and current input, and (2) per the data sheet When selecting the current input loop powered function, tie the VIOUTN_x pin to ground via the on-chip 200 kΩ resistor by enabling the CH_200K_TO_GND bit in the ADC_CONFIGx registers. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20230301115511.849418-1-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
Use the value specified in the channel configuration node to populate the DIN_SINK field of the DIN_CONFIGx register. Signed-off-by:
-
Rasmus Villemoes authored
Depending on the actual hardware wired up to a digital input channel, it may be necessary to configure the ad74413r to sink a small current. For example, in the case of a simple mechanical switch, the charge on the external 68 nF capacitor (cf. the data sheet's Figure 34) will keep the channel as reading high even after the switch is turned off again. Signed-off-by:
-
Mike Looijmans authored
The ADS1100 is a 16-bit ADC (at 8 samples per second). The ADS1000 is similar, but has a fixed data rate. Signed-off-by:
Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by:
-
Mike Looijmans authored
The ADS1100 is a 16-bit ADC (at 8 samples per second). The ADS1000 is similar, but has a fixed data rate. Signed-off-by:
-
- 11 Mar, 2023 26 commits
-
-
William Breathitt Gray authored
This driver supports the CIO-DAC08 device and not "CIO-DAC06". Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/iio/adc/rcar-gyroadc.c:286:34: error: ‘rcar_gyroadc_child_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Marco Felsch authored
Align the code correctly if possible and align the channel bit mask to make it easier to read. Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20230228090518.529811-6-m.felsch@pengutronix.deSigned-off-by:
-
Marco Felsch authored
The TMP116 is the predecessor of the TMP117. The TMP116 don't support custom offset calibration data, instead this register is used as generic EEPROM storage as well. Signed-off-by:
-
Marco Felsch authored
The TMP116 is the predecessor of the TMP117. Signed-off-by:
-
Marco Felsch authored
Don't error if the device-id found don't match the device-id for the TMP117 sensor since other TMPxxx might be compatible to the TMP117. The fallback mechanism tries to gather the required information from the of_device_id or from the i2c_client information. The commit also prepares the driver for adding new devices more easily by making use of switch-case at the relevant parts. Signed-off-by:
-
Marco Felsch authored
Fix the broken link to point to the correct homepage. Fixes: 5e713b25 ("dt-bindings: iio: temperature: Add DT bindings for TMP117") Signed-off-by:
-
Mehdi Djait authored
Rename the function to iio_trigger_poll_nested. Add kernel-doc with a note on the context where the function is expected to be called. Signed-off-by:
Mehdi Djait <mehdi.djait.k@gmail.com> Link: https://lore.kernel.org/r/841b533cba28ca25a8e87280c44e45979166e8e2.1677761379.git.mehdi.djait.k@gmail.comSigned-off-by:
-
Mehdi Djait authored
Move the kernel-doc of the function to industrialio-trigger.c Add a note on the context where the function is expected to be called. Signed-off-by:
-
Lorenzo Bianconi authored
During digital filters settling time the driver is expected to drop samples since they can be corrupted. Introduce the capability to drop a given number of samples according to the configured ODR. Add sample_to_discard for LSM6DSM-like sensors since new generation devices (e.g. LSM6DSO) support DRDY mask where corrupted samples are masked in hw with values greather than 0x7ffd so the driver can easily discard them. I have not added sample_to_discard support for LSM6DS3 or LSM6DS3H since I do not have any sample for testing at the moment. Reported-by:
Philippe De Muyter <phdm@macqel.be> Tested-by:
-
Angel Iglesias authored
The pressure sensor BMP580 contains a non-volatile memory that stores trimming and configuration params. That memory provides an programmable user range of three 2-byte words. Signed-off-by:
Angel Iglesias <ang.iglesiasg@gmail.com> Link: https://lore.kernel.org/r/f3f453d9b2c0f7820ca9c56e24e2165b6c39bb67.1676823250.git.ang.iglesiasg@gmail.comSigned-off-by:
-
Angel Iglesias authored
Add bosch,bmp580 to compatible string for the new family of sensors. This family includes the BMP580 and BMP581 sensors. The register map in this family presents significant departures from previous generations. Signed-off-by:
-
Angel Iglesias authored
Adds compatibility with the new sensor generation, the BMP580. The measurement and initialization codepaths are adapted from the device datasheet and the repository from manufacturer at https://github.com/boschsensortec/BMP5-Sensor-API. Signed-off-by:
-
Angel Iglesias authored
Title entry for BMP280 called the driver an I2C implementation, when the driver supports both I2C and SPI. Signed-off-by:
-
Angel Iglesias authored
Newer models do not require read the calibration parameters and apply the compensation algorithms in the sensor. Suggested-by:
-
Angel Iglesias authored
Adds preinit callback to execute operations on probe before applying initial configuration. Signed-off-by:
-
Angel Iglesias authored
Refactor driver I2C and SPI implementations using pointers for each variant's chip_info as the driver data. Adds the regmap configuration to the chip_info struct. Suggested-by:
-
Uwe Kleine-König authored
meson_sar_adc_lock() might return an error if BL30 doesn't release its lock on the hardware. Just returning early from .remove() is wrong however as this keeps the clocks and regulators on which is never cleaned up later. Given the BL30 not giving up its lock is a strong hint for broken behaviour, and there is nothing we can do about that: Just clean up ignoring the fact that we're not holding the lock. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230219204439.1641640-1-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Aidan MacDonald authored
The adc_en2 flag is essentially specific to axp20x-compatible devices because it hardcodes register values. Replace it with a mask field so the register value can be specified in device match data. Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20230217153404.32481-2-aidanmacdonald.0x0@gmail.comSigned-off-by:
-
Aidan MacDonald authored
The code may be clearer if parameters are not re-purposed to hold temporary results like register values, so introduce local variables as necessary to avoid that. Regroup macros based on chip type, and use the FIELD_PREP() macro instead of a hand-rolled version. Suggested-by:
Jonathan Cameron <jic23@kernel.org> Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Reviewed-by:
-
Nuno Sá authored
The minimal advised lower rate for adis16475 compatible devices is 1900HZ and not 4000HZ. Set that right in the comments so that it does not generate any confusion. Signed-off-by:
Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230213153208.1027602-1-nuno.sa@analog.comSigned-off-by:
-
Gwendal Grignou authored
Older firmwares still send sensor configuration using a list of registers with opaque values defined during sensor tuning. sx9234 and sx9360 sensor on ACPI based devices are concerned. More schema to configure the sensors will be needed to support devices designed for windows, like Samsung Galaxy Book2. Support schema is: "<_HID>.<register_name>". For instance "STH9324,reg_adv_ctrl2" in: Scope (\_SB.PCI0.I2C2) { Device (SX28) { Name (_HID, "STH9324") // _HID: Hardware ID ... Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x3F) { ... Package (0x02) { "STH9324,reg_adv_ctrl2", Zero },` Signed-off-by:Gwendal Grignou <gwendal@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20230211002421.3447060-1-gwendal@chromium.orgSigned-off-by:
-
Jonathan Cameron authored
This driver is so far from making correct use of the IIO infrastructure and ABI that if someone wanted to make the driver suitable for moving out of staging, they would more or less be starting from scratch. As such there is little point in keeping the existing code in staging. Note this was only user of the meter.h header so that is dropped. There are no other drivers in the staging/iio/meter directory so drop the build system files as well. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230129160805.747745-1-jic23@kernel.org
-
Jonathan Cameron authored
struct sx_common_data doesn't have a num_default_regs element so drop the documentation for it. Signed-off-by:
-
Antoniu Miclaus authored
Add array of explicit gpio names for the `gpiochip` structure of ad5592r, mainly for debug purposes. Since the gpios are configurable via the dts, generic names are used. Signed-off-by:
Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20221117090130.51702-1-antoniu.miclaus@analog.comSigned-off-by:
-
Geert Uytterhoeven authored
Set limits on the number of power-domains and resets, and make them required. Simplify the example, and update it to match reality: - Convert from obsolete MSTP to CPG/MSSR bindings, - Examples should use #{address,size}-cells = <1>, - Add missing resets property, - Drop soc container and pinctrl properties, which are not needed in examples. Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
-
