- 25 Nov, 2013 19 commits
-
-
Bob Copeland authored
All other paths return an error code, do the same here. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Bob Copeland authored
The ignore_plink_timer flag is set when doing mod_timer() if the timer was not previously active. This is to avoid executing the timeout if del_timer() was subsequently called. However, del_timer() only happens if we are moving to ESTAB state or get a close frame while in HOLDING. We cannot leave HOLDING and re-enter ESTAB unless we receive a close frame (in which case ignore_plink_timer is already set) or if the timeout expires, so there actually isn't a case where this is needed on mod_timer(). Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Bob Copeland authored
The matches_local check can just be done when looking at the individual action types. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Bob Copeland authored
Use C instead of cpp for type checking. Also swap the arguments into the usual sdata -> sta order. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Bob Copeland authored
The initial frame checks differ depending on whether this is a new peer or not, but they were all intermixed with sta checks as necessary. Group them together so the two cases are clearer. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Bob Copeland authored
Reject and accepted close events always put the host in the holding state and compute a reason code based only on the current state. Likewise on establish we always do the same setup. Put these in functions to save some duplicated code. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Bob Copeland authored
Rather than unlock at the end of each case, do it once after all is said and done. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Thomas Pedersen authored
Do all frame transfers in one place at the end of the big switch statements. sta->plid and sta->reason can be passed in any case, since they are only used for the frames that need them. Remove assignments to locals for values already stored in the sta structure. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Bob Copeland authored
According to IEEE 802.11-2012 (8.4.2.104), no peering management element exists with length 7. This code is checking to see if llid is present to ignore close frames with different llid, which would be IEs with length 8. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Luis R. Rodriguez authored
The iniator is already available to us, so use it. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Luis R. Rodriguez authored
wiphy_apply_custom_regulatory() implies WIPHY_FLAG_CUSTOM_REGULATORY but we never enforced it, do that now and warn if the driver didn't set it. All drivers should be following this today already. Having WIPHY_FLAG_CUSTOM_REGULATORY does not however mean you will use wiphy_apply_custom_regulatory() though, you may have your own _orig value set up tools / helpers. The intel drivers are examples of this type of driver. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Janusz Dziedzic authored
Check chandef we get in CAC request is usable for CAC. All channels have to be DFS channels. Allow DFS_USABLE and DFS_AVAILABLE channels mix. At least one channel has to be DFS_USABLE (require CAC). Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Janusz Dziedzic authored
Add helper fuctions for start/end freq. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Janusz Dziedzic authored
Add 160MHz width support. This could be usefull for testing VHT160 DFS functionality. This could be also usefull in the future when DFS and non-DFS channels could be mixed. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Janusz Dziedzic authored
Add iface combination that will allow DFS support. Add also debugfs dfs_simulate_radar file that can be used to simulate radar event. This could be useful for mac80211/cfg80211/ regulatory/hostap code testing without real HW. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Janusz Dziedzic authored
Use debugfs_remove_recursive. That avoids the need for the new dentry pointers and extra debugfs_remove calls. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Karl Beldan authored
Currently, frames that go into the reordering buffer are stored at index ieee80211_sn_sub(sn, tid_rx->ssn) % tid_rx->buf_size. The offset calculation to the starting sequence number (SSN) is useless and just adds overhead so simply use sn % tid_rx->buf_size. This means the reordering buffer will start to be filled somewhere in the middle (at SSN % buf_size) and continue to get used from there, but there's no reason to start from the beginning. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Luis R. Rodriguez authored
These two flags are used for the same purpose, just combine them into a no-ir flag to annotate no initiating radiation is allowed. Old userspace sending either flag will have it treated as the no-ir flag. To be considerate to older userspace we also send both the no-ir flag and the old no-ibss flags. Newer userspace will have to be aware of older kernels. Update all places in the tree using these flags with the following semantic patch: @@ @@ -NL80211_RRF_PASSIVE_SCAN +NL80211_RRF_NO_IR @@ @@ -NL80211_RRF_NO_IBSS +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_PASSIVE_SCAN +IEEE80211_CHAN_NO_IR @@ @@ -IEEE80211_CHAN_NO_IBSS +IEEE80211_CHAN_NO_IR @@ @@ -NL80211_RRF_NO_IR | NL80211_RRF_NO_IR +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_IR +IEEE80211_CHAN_NO_IR @@ @@ -(NL80211_RRF_NO_IR) +NL80211_RRF_NO_IR @@ @@ -(IEEE80211_CHAN_NO_IR) +IEEE80211_CHAN_NO_IR Along with some hand-optimisations in documentation, to remove duplicates and to fix some indentation. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [do all the driver updates in one go] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Arik Nemtsov authored
This command has different semantics depending on the action code sent. Document this fact and detail the supported action codes. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
- 05 Nov, 2013 6 commits
-
-
-
John W. Linville authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville authored
Conflicts: net/wireless/reg.c
- 04 Nov, 2013 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessJohn W. Linville authored
Conflicts: drivers/net/wireless/iwlwifi/pcie/drv.c
-
- 30 Oct, 2013 1 commit
-
-
Emmanuel Grumbach authored
Putting the context id of the primary phy context in the placeholder of the secondary is obviously a bad idea. Spotted by smatch. Fixes: dac94da8 ("iwlwifi: mvm: new BT Coex API") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
- 29 Oct, 2013 8 commits
-
-
Michael Opdenacker authored
Reported by "make includecheck" Tested that the corresponding sources still compile well on x86 Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Johannes Berg authored
If the firmware image that we attempt to load doesn't actually exist we have a broken firmware file or other code not checking things correctly, so warn in such a case. Also avoid assigning cur_ucode/ucode_loaded then. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Johannes Berg authored
When writing the disable_power_off value, the LPRX enable value also gets written unintentionally, so fix that by adding the missing break statement. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Johannes Berg authored
This can be useful when using the device as a sniffer. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Johannes Berg authored
Having a WARN_ON() followed by a printed message is less useful than having the message in the warning so move the message. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Emmanuel Grumbach authored
When we disassociate, mac80211 removes the station and then, it sets the bss it unsets the assoc bool in bss_info. Since the firwmware wants it the opposite (first set the MAC context as unassoc, and only then, remove the STA of the API), we have a small period of time in which the STA in firmware doesn't have a valid ieee80211_sta pointer. During that time, iwl_mvm_vif->ap_sta_id, is still set to the STA in firmware that represent the AP. This avoids: [ 4481.476246] BUG: unable to handle kernel NULL pointer dereference at 00000045 [ 4481.479521] IP: [<f8416a6a>] iwl_mvm_bt_coex_reduced_txp+0x7a/0x190 [iwlmvm] [ 4481.482023] *pde = 00000000 [ 4481.484332] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 4481.486897] Modules linked in: netconsole configfs autofs4 rfcomm(O) bnep(O) nfsd nfs_acl auth_rpcgss exportfs nfs lockd binfmt_misc sunrpc fscache arc4 iwlmvm(O) mac80211(O) btusb(O) iwlwifi(O) bluetooth(O) cfg80211(O) snd_hda_codec_hdmi coretemp dell_wmi snd_hda_codec_idt compat(O) dell_laptop aesni_intel i915 sparse_keymap dcdbas cryptd psmouse serio_raw aes_i586 microcode snd_hda_intel drm_kms_helper snd_hda_codec drm snd_pcm snd_timer i2c_algo_bit video intel_agp intel_gtt snd soundcore snd_page_alloc crc32c_intel ahci sdhci_pci libahci sdhci mmc_core e1000e xhci_hcd [last unloaded: configfs] [ 4481.502983] [ 4481.505599] Pid: 6507, comm: kworker/0:1 Tainted: G O 3.4.43-dev #1 Dell Inc. Latitude E6430/0CMDYV [ 4481.508575] EIP: 0060:[<f8416a6a>] EFLAGS: 00010246 CPU: 0 [ 4481.511248] EIP is at iwl_mvm_bt_coex_reduced_txp+0x7a/0x190 [iwlmvm] [ 4481.513947] EAX: ffffffea EBX: 00000002 ECX: 00000001 EDX: 00000001 [ 4481.516710] ESI: ec6f0f28 EDI: 00000000 EBP: e8175dfc ESP: e8175d9c [ 4481.519445] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 4481.522185] CR0: 8005003b CR2: 00000045 CR3: 01a5e000 CR4: 001407d0 [ 4481.524950] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 4481.527768] DR6: ffff0ff0 DR7: 00000400 [ 4481.530565] Process kworker/0:1 (pid: 6507, ti=e8174000 task=e8032b20 task.ti=e8174000) [ 4481.533447] Stack: [ 4481.536379] e472439f 00003a12 e8032b20 e8033048 00000001 e8175ddc 00000246 e8033040 [ 4481.540132] 00000002 01814990 ec4d1ddc e8175dcc 00000000 00000000 00000000 00000000 [ 4481.543867] 00000000 00000000 00000001 000001c8 009b0002 ec4d1ddc ec6f0f28 00000000 [ 4481.547633] Call Trace: [ 4481.550578] [<f8418027>] iwl_mvm_bt_rssi_event+0x197/0x220 [iwlmvm] [ 4481.553537] [<f840919c>] iwl_mvm_stat_iterator+0xdc/0x240 [iwlmvm] [ 4481.556582] [<f8d129c2>] __iterate_active_interfaces+0xe2/0x1f0 [mac80211] [ 4481.559544] [<f84090c0>] ? iwl_mvm_update_smps+0x90/0x90 [iwlmvm] [ 4481.562519] [<f84090c0>] ? iwl_mvm_update_smps+0x90/0x90 [iwlmvm] [ 4481.565498] [<f8d12b0c>] ieee80211_iterate_active_interfaces+0x3c/0x50 [mac80211] [ 4481.568421] [<f8409b43>] iwl_mvm_rx_statistics+0xb3/0x130 [iwlmvm] [ 4481.571349] [<f8405431>] iwl_mvm_async_handlers_wk+0xc1/0xf0 [iwlmvm] [ 4481.574251] [<c1052915>] ? process_one_work+0x105/0x5c0 [ 4481.577162] [<c1052991>] process_one_work+0x181/0x5c0 [ 4481.580025] [<c1052915>] ? process_one_work+0x105/0x5c0 [ 4481.582861] [<f8405370>] ? iwl_mvm_rx_fw_logs+0x20/0x20 [iwlmvm] [ 4481.585722] [<c10530f1>] worker_thread+0x121/0x2c0 [ 4481.588536] [<c1052fd0>] ? rescuer_thread+0x1d0/0x1d0 [ 4481.591323] [<c105af0d>] kthread+0x7d/0x90 [ 4481.594059] [<c105ae90>] ? flush_kthread_worker+0x120/0x120 [ 4481.596868] [<c15b7cc2>] kernel_thread_helper+0x6/0x10 [ 4481.599605] Code: 9d de c3 c8 85 c0 74 0d 80 3d f8 ae 42 f8 00 0f 84 dc 00 00 00 8b 45 c8 0f b6 d3 31 ff 89 55 c0 8b 84 90 d8 03 00 00 0f b6 55 c7 <38> 50 5b 89 45 bc 0f 84 a8 00 00 00 a1 e4 d2 04 c2 85 c0 0f 84 [ 4481.611782] EIP: [<f8416a6a>] iwl_mvm_bt_coex_reduced_txp+0x7a/0x190 [iwlmvm] SS:ESP 0068:e8175d9c [ 4481.614985] CR2: 0000000000000045 [ 4481.687441] ---[ end trace b11bc915fbac4412 ]--- Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Johannes Berg authored
The number of commands can never be negative, so it should be using an unsigned type. This also shuts up an smatch warning elsewhere in the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Alexander Bondar authored
Change old UAPSD bit to PM_CMD_SUPPORT, and add a new bit to indicate real UAPSD support. Don't use UAPSD when the firmware doesn't support it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
- 28 Oct, 2013 5 commits
-
-
Andrei Otcheretianski authored
The nl80211 attribute NL80211_ATTR_CSA_C_OFF_BEACON should be nested inside NL80211_ATTR_CSA_IES, but commit ee4bc9e7 ("nl80211: enable IBSS support for channel switch announcements") added a check in the outer message attributes. Fix channel switch calls by removing the erroneus condition. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> [reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Jouni Malinen authored
mac80211_hwsim canceled beacon_timer on any vif changing from enabled to disabled beaconing. This breaks cases where there are multiple beaconing vifs and only one of them is removed. Fix this by tracking beaconing status per vif and disable beacon_timer only if no active vif remain with beaconing enabled. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Michal Kazior authored
CSA completion could call in a driver bss_info_changed() with a garbled `changed` flag leading to all sorts of problems. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Chun-Yeow Yeoh authored
Trigger the mesh channel switching procedure if the mesh STA happens to miss the CSA action frame but able to receive the beacon containing the CSA and MCSP elements from its peer mesh STAs. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> [fix locking in ieee80211_mesh_process_chnswitch()] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Chun-Yeow Yeoh authored
Implement the required procedures for mesh channel switching as defined in the IEEE Std 802.11-2012 section 10.9.8.4.3 and also handle the CSA and MCSP elements as followed: * Add the function for updating the beacon and probe response frames with CSA and MCSP elements during the period of switching to the new channel. Both CSA and MCSP elements must be included in beacon and probe response frames until the intended channel switch time. * The ifmsh->csa_settings is set to NULL and the CSA and MCSP elements will then be removed from the beacon or probe response frames once the new channel is switched to. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-