- 25 Apr, 2020 5 commits
-
-
Dan Carpenter authored
We need to cap "ssidlen" to prevent a memcpy() overflow. Fixes: 40115bbc ("staging: wfx: implement the rest of mac80211 API") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200424104235.GA416402@mwandaSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
kyoungho koo authored
I have found double typed comments "the the". So i modified it to one "the" Signed-off-by: kyoungho koo <rnrudgh@gmail.com> Link: https://lore.kernel.org/r/20200424170508.GA10761@koo-Z370-HD3Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rylan Dmello authored
Fix checkpatch.pl warning: macros should not use a trailing semicolon Signed-off-by: Rylan Dmello <mail@rylan.coffee> Link: https://lore.kernel.org/r/20200424025723.GA28156@athenaSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Richard C Yeh authored
After consultation with Todd Poynor and Jesse Barnes, I am adding myself as a maintainer for drivers/staging/gasket Signed-off-by: Richard C Yeh <rcy@google.com> Acked-by: Todd Poynor <toddpoynor@google.com> Link: https://lore.kernel.org/r/20200423191504.149922-1-rcy@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kyoungho Koo authored
I have found double typed comments "the the". So i modified it to one "the". Signed-off-by: Kyoungho Koo <rnrudgh@gmail.com> Link: https://lore.kernel.org/r/20200425090714.GA2105@koo-Z370-HD3Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 23 Apr, 2020 31 commits
-
-
Oscar Carter authored
Replace the for loops of the vnt_update_top_rates function by the fls function. The purpose of the two for loops is to find the most significant bit set in a range of bits. So, they can be replace by the fls function (find last set) with a previous mask to define the range. This way avoid the iteration over unnecessary for loops. The header "linux/bits.h" can be remove as it is included in the header "linux/bitops.h". Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Link: https://lore.kernel.org/r/20200420155246.4925-1-oscar.carter@gmx.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oscar Carter authored
Replace the for loop by a ternary operator whose condition is an AND bitmask against the priv->basic_rates variable. The purpose of the for loop was to check if any of bits from RATE_54M to RATE_6M was set, but it's not necessary to check every individual bit. The same result can be achieved using only one single mask which comprises all the commented bits. This way avoid the iteration over an unnecessary for loop. Also change the return type to bool because it's the type that this function returns. Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Link: https://lore.kernel.org/r/20200418134553.6415-1-oscar.carter@gmx.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xiyu Yang authored
gasket_sysfs_register_store() invokes get_mapping(), which returns a reference of the specified gasket_sysfs_mapping object to "mapping" with increased refcnt. When gasket_sysfs_register_store() returns, local variable "mapping" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of gasket_sysfs_register_store(). When gasket_dev is NULL, the function forgets to decrease the refcnt increased by get_mapping(), causing a refcnt leak. Fix this issue by calling put_mapping() when gasket_dev is NULL. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Link: https://lore.kernel.org/r/1587618941-13718-1-git-send-email-xiyuyang19@fudan.edu.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xiyu Yang authored
gasket_sysfs_put_attr() invokes get_mapping(), which returns a reference of the specified gasket_sysfs_mapping object to "mapping" with increased refcnt. When gasket_sysfs_put_attr() returns, local variable "mapping" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one path of gasket_sysfs_put_attr(). When mapping attribute is unknown, the function forgets to decrease the refcnt increased by get_mapping(), causing a refcnt leak. Fix this issue by calling put_mapping() when put attribute fails due to unknown attribute. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Link: https://lore.kernel.org/r/1587618895-13660-1-git-send-email-xiyuyang19@fudan.edu.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason Yan authored
Fix the following coccicheck warning: drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c:223:14-36: WARNING: Use correct pointer type argument for sizeof Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20200420133416.3087-1-yanaijie@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
realwakka authored
Replace legacy/depreacted pci_dma_* functions to new dma_* functions. Also replace PCI_DMA_* macro to DMA* macro. Signed-off-by: realwakka <realwakka@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20200420154009.21161-1-realwakka@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathieu Dolmen authored
Cleanup indentation style in qlge_main.c. Fix 2 warnings found by checkpatch.pl. Signed-off-by: Mathieu Dolmen <mathieu.dolmen@gmail.com> Link: https://lore.kernel.org/r/20200419125712.27506-1-mathieu.dolmen@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Malcolm Priestley authored
These functions are only used by rxtx so move them and their arrays used with them abbreviating the function description. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/2a4fd665-2fe1-f1ad-1e9a-1b01f698ea79@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Malcolm Priestley authored
vnt_update_pre_ed_threshold needs to be updated more often so call from vnt_config where it updated on any of config changes. It must have maximum sensitivity when the device is off channel or idle. Remove all the other calls in scanning and bss. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/1b00c112-347c-b0bb-61ed-a874ee448ff8@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Malcolm Priestley authored
The firmware function are not that complicated so move them into main_usb as static functions in callers visibility Firmware definitions moved to device.h and MODULE_FIRMWARE move to below module_usb_driver. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/7b384871-826b-9365-e3ed-5717ecefd31c@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Denis Straghkov authored
Add size check of SSID information element in incoming 802.11 frames, to prevent memcpy() of IE in array bssid->Ssid.Ssid, with size more than 32 bytes. Signed-off-by: Denis Straghkov <d.straghkov@ispras.ru> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200421212525.24962-1-d.straghkov@ispras.ruSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YueHaibing authored
drivers/staging/rtl8723bs/hal/sdio_halinit.c: In function HalRxAggr8723BSdio: drivers/staging/rtl8723bs/hal/sdio_halinit.c:547:24: warning: variable pregistrypriv set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200421024145.43576-1-yuehaibing@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason Yan authored
Fix the following gcc warning: drivers/staging/rtl8723bs/hal/odm.c:10:18: warning: ‘dB_Invert_Table’ defined but not used [-Wunused-const-variable=] static const u16 dB_Invert_Table[8][12] = { ^~~~~~~~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20200417073439.41888-1-yanaijie@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason Yan authored
Fix the following gcc warning: drivers/staging/rtl8723bs/hal/hal_btcoex.c:45:26: warning: ‘ioStaString’ defined but not used [-Wunused-const-variable=] static const char *const ioStaString[] = { ^~~~~~~~~~~ drivers/staging/rtl8723bs/hal/hal_btcoex.c:38:26: warning: ‘h2cStaString’ defined but not used [-Wunused-const-variable=] static const char *const h2cStaString[] = { ^~~~~~~~~~~~ drivers/staging/rtl8723bs/hal/hal_btcoex.c:33:26: warning: ‘BtLinkRoleString’ defined but not used [-Wunused-const-variable=] static const char *const BtLinkRoleString[] = { ^~~~~~~~~~~~~~~~ drivers/staging/rtl8723bs/hal/hal_btcoex.c:23:26: warning: ‘BtSpecString’ defined but not used [-Wunused-const-variable=] static const char *const BtSpecString[] = { ^~~~~~~~~~~~ drivers/staging/rtl8723bs/hal/hal_btcoex.c:15:26: warning: ‘BtProfileString’ defined but not used [-Wunused-const-variable=] static const char *const BtProfileString[] = { ^~~~~~~~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20200417073310.40893-1-yanaijie@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
The field join_complete_status is never read. Drop it. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200420160311.57323-17-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
In former code, the field wvif->state was more or less redundant with vif->type. With the lasts change it has become unused. It is now time to drop it. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200420160311.57323-16-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
In wfx_remove_interface(), the current code differentiate AP and Station cases. However, it is not necessary. In all cases, the only important thing is the call to hif_reset(). We can use the same code to support all cases. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200420160311.57323-15-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
The callers of wfx_do_unjoin() already take care of vif state. Therefore, it is not necessary to take care of the status of the interface. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200420160311.57323-14-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
In former code (before the inclusion of the driver in mainline kernel), hif_join() could run asynchronously. When a join request was in progress, it was forbidden to launch hif_scan(). Now, hif_join() is always run synchronously. There is no more reasons to keep a protection against this case. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200420160311.57323-13-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
Keys sent to the firmware are never reset. So, it is not necessary to re-upload them after hif_reset(). Thus, it is no more necessary to keep a copy of the keys in struct wfx_dev. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200420160311.57323-12-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
Currently code handle WEP keys manually. It is far easier to use the set_default_unicast_key() callback provided by mac80211. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200420160311.57323-11-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
Basic Rates are already set by hif_join(). hif_join() is also able to manage possible changes after association. Firmware also allows to change the Basic Rates with hif_set_association_mode() but it does not bring anything in our case. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200420160311.57323-10-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
The structure hif_req_set_bss_params come from hardware API. It is not intended to be manipulated in upper layers of the driver. In add, current code for hif_req_set_bss_params() is too dumb. It should pack data with hardware representation instead of leaving all work to the caller. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200420160311.57323-9-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
The field bss_params.operational_rate_set is ignore by the firmware. It is not necessary to send it. This change greatly simplify wfx_join_finalize(). It is no more necessary to get sta and it allow to save a RCU. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200420160311.57323-8-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
Dual CTS is only necessary when sending/receiving STBC data. However, the chip does not support STBC, so it is never necessary to enable double CTS. We can simplify the code. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200420160311.57323-7-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
Current code skip some configuration during joining an IBSS network. Indeed, it seems that this configuration is not used in IBSS. However, it would be harmless to set them. In add, we would prefer to keep association processes for ad-hoc and managed networks the closest as possible. It also ensures the values of internal parameters of the firmware. Therefore, apply them unconditionally. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200420160311.57323-6-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
Currently, events from firmware are handled in a work queue with a complex event queue mechanism. It is probably overkill since there is only two events to handle: bss_loss and CQM events. Handling these events synchronously is sufficient. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200420160311.57323-5-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
Since wfx_bss_params_work() does not exist anymore, there is no more reason to keep a copy of bss_params in struct wfx_dev. A local instance in wfx_join_finalize() is sufficient. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200420160311.57323-4-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
The firmware is able to filter beacons and send a notification if one or multiple beacons are not received. Note that it send this notification only once. Only if it receive beacons gain, it send a new notification. Currently, the driver handle the connection loss itself (see wfx_cqm_bssloss_sm()). It send null frames and watch the answers. This patch fixes all this mess: - settle firmware to send a notification on the first beacon loss - call ieee80211_beacon_loss() and let mac80211 handle all the process - since we do have notification for each beacon loss, add a period task that call ieee80211_beacon_loss() until we receive "REGAIN" notification. Thus, we can drop the ugly wfx_cqm_bssloss_sm() and wfx_bss_params_work(). Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200420160311.57323-3-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
Firmware dislikes the driver enables PS when it is not yet associated. The current check for that condition is more complex than necessary. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200420160311.57323-2-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new IIO device support, features and cleanup for the 5.8 cycle Usual mix of new drivers, new support in old drivers and lots of minor cleanup. Yaml conversions also continue to trickle in (plenty more to go!) New device support * ad7476 - Add ad7091 support (ID only) * ad9467 - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC. * adi-axi-adc - New driver to support ADIs generic AXI ADC IP core, used to provide high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually paired with a device using a slow configuration interface (spi etc) Includes DT bindings and some fixes for fpga headers. * bmg160 - Add support for BMI088 (ID only) * max1241 - New driver for this ADC. * st_sensors - Add support for LIS2HH12 accelerometer * sx9310 - New driver supporting sx9310 and sx9311 proximity sensors. Yaml DT binding conversions * rockchip-saradc (including adding some missing parts) * stm32-dac * tsl2563 * vcnl4000 Features * st_lsm6dsx - Add LIS3MDL as a possible sensor hub device. * vcnl4000 - Add new concept of near level (from DT) to provide to userspace which often needs to have some calibrated concept of 'near'. Cleanups, minor fixes etc. * core - Use snprintf for functions where strings are built and there is potential for overflow. - Correct docs to indicate mlock should not be used directly by drivers. - Fix up accidental dropping of a patch to use bitmap_zalloc. - Stop allowing enabling of buffers with no channels enabled. - Drop unused 'stufftoread' from iio_buffer. - Drop scan_el_attrs form iio_buffer as unused. - Reorder sanity checks in __iio_device_register to fail earlier. - Drop all the devm_ runregister / free functions from IIO as they were never used and encourage poor design. * dma-buffer - Tidy up includes. * dma-engine-buffer - Provide dev-managed allocator. - Fix an issue with printing a size_t * cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150) - Replace some unnecessary casts of error ptrs and whilst there. use the %pe printf parameter to print them in a more useful fashion. * cross subsystem - Drop casts in calls to regmap_bulk_read as they make no sense. - Use devm_platform_ioremap_resource to reduce boilerplate. - Fix typos in Analog Devices. * counters/104-quad - Add Syed Nayyar Waris as an additional maintainer. * ad7476 - Generate CONVST signal internally rather than requiring external trigger. Add sysfs read back as can now do so. - use devm_add_action_or_reset to tidy up error and remove handling. * ad7793 - Switch to read_avail from explicit attribute. Mostly done to avoid confusing people with a - sign (without surounding spaces) that was correct but checkpatch didn't like. * adis library - Add missing newlines at end of error messages. * adis16400 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * adis16460 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * ad_sigma_delta - Move some channel definitions into individual drivers to avoid having to deal with complex options. * ak8974 - Silence an error on deffered probe. * bmp280 - Harden against IRQ before registration. - Convert to read_avail instead of opencoding the equivalent. - Explicitly mark GPIO as optional. - Cleanup casts. - Remove line breaks from strings. * htts221 - Replace direct access to platform_data with dev_get_platdata(). - Use device properties rather than device tree ones to allow ACPI probing. - Casting cleanups. * intel_mrfld_adc - Don't use unaligned accessor for aligned data. * isl29125 - Reorder buer pre and post hooks to allow for coming core rework. * ltc2983 - Remove comp to bool. * max1363 - Stop using mlock from the iio_dev directly in favour of a local lock with clearly defined scope. * max30100 - Use generic device properties to allow ACPI probe. * mpu6050 - Convert to i2c_new_client_device. - Add debugfs register access. * st_lsm6dsx - Provide means of configuring full scale on slave device if supported. - Drop include of st_sensors header to get one value. Its not otherwise used by this driver. * st-sensors - Replace direct access to platform_data with dev_get_platdata(). - Casting cleanups. - Avoid splitting strings. * st_uvis25 - Casting cleanups. * tsl2563 - Typo fix. * tsl2772 - scnprintf in a non obvious string building usecase. Note also 'fixes' a wrong calculation of remaining space that couldn't actually cause any trouble as there was lots of room. * xilinx-xadc - Fix Lars-Peter spelling his own name wrong :) + additional typos. * tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (101 commits) iio: magnetometer: ak8974: Silence deferred-probe error Documentation: ABI: document IIO in_proximity_nearlevel file iio: vcnl4000: Export near level property for proximity sensor dt-bindings: iio: light: vcnl4000: Add proximity-near-level dt-bindings: iio: Introduce common properties for iio sensors dt-bindings: iio: vcnl4000: convert bindings to YAML format iio: Fix misspellings of "Analog Devices" iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource iio: adc: at91-adc: Use devm_platform_ioremap_resource iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk* iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions. iio:chemical:bme680: Tidy up parameters to regmap_bulk_read iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver iio: buffer: drop devm_iio_kfifo_free() API call iio: buffer: drop devm_iio_hw_consumer_free() API call ...
-
- 19 Apr, 2020 4 commits
-
-
Dmitry Osipenko authored
It's not uncommon that voltage regulator becomes available later during kernel's boot process. This patch adds info message about unavailable regulators in a case of the deferred-probe error and also amends the error message with a error code. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Guido Günther authored
The vcnl4000 IIO driver introduced a new attribute "in_proximity_nearlevel". This adds it to the list of documented ABI for sysfs-bus-iio. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Guido Günther authored
When an object can be considered close to the sensor is hardware dependent. Allowing to configure the property via device tree allows to configure this device specific value. This is useful for e.g. iio-sensor-proxy to indicate to userspace if an object is close to the sensor. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Guido Günther authored
This value indicates when userspace should consider an object near to the sensor/device. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-