- 08 Nov, 2019 6 commits
-
-
Lang Cheng authored
If a variable needs to be set to 0 before use, it can be directly initialized to 0. Link: https://lore.kernel.org/r/1572952082-6681-7-git-send-email-liweihang@hisilicon.comSigned-off-by:
Lang Cheng <chenglang@huawei.com> Signed-off-by:
Weihang Li <liweihang@hisilicon.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Yixing Liu authored
Replace "sw2hw" and "hw2sw" which is hard to understand with "create" and "destroy". Link: https://lore.kernel.org/r/1572952082-6681-6-git-send-email-liweihang@hisilicon.comSigned-off-by:
Yixing Liu <liuyixing1@huawei.com> Signed-off-by:
Weihang Li <liweihang@hisilicon.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Yixian Liu authored
Use wqe_cnt instead of max which means the queue size of srq, and remove wqe_ctr which is not used. Link: https://lore.kernel.org/r/1572952082-6681-5-git-send-email-liweihang@hisilicon.comSigned-off-by:
Yixian Liu <liuyixian@huawei.com> Signed-off-by:
Weihang Li <liweihang@hisilicon.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Yixian Liu authored
The uar information is already recorded in priv_uar of hns_roce_dev, there is no need to record it in hns_roce_cq again. Link: https://lore.kernel.org/r/1572952082-6681-4-git-send-email-liweihang@hisilicon.comSigned-off-by:
Yixian Liu <liuyixian@huawei.com> Signed-off-by:
Weihang Li <liweihang@hisilicon.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Lang Cheng authored
Special QP have no differences with normal qp in data structure, so definition of struct hns_roce_sqp should be removed and replaced by struct hns_roce_qp. Link: https://lore.kernel.org/r/1572952082-6681-3-git-send-email-liweihang@hisilicon.comSigned-off-by:
Lang Cheng <chenglang@huawei.com> Signed-off-by:
Weihang Li <liweihang@hisilicon.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Yixian Liu authored
There is no need to define max_post in hns_roce_wq, as it does same thing as wqe_cnt. Link: https://lore.kernel.org/r/1572952082-6681-2-git-send-email-liweihang@hisilicon.comSigned-off-by:
Yixian Liu <liuyixian@huawei.com> Signed-off-by:
Weihang Li <liweihang@hisilicon.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
- 06 Nov, 2019 20 commits
-
-
Leon Romanovsky authored
Multiple "if"s and "||" make extension of process_mad() function as a tedious task, rewrite that function to be more readable. Link: https://lore.kernel.org/r/20191029062745.7932-14-leon@kernel.orgSigned-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
Change the switch with one case into a simple if statement so the code is less confusing. Link: https://lore.kernel.org/r/20191029062745.7932-12-leon@kernel.orgSigned-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
All callers for process_mad allocate MAD structures with proper sizes, there is no need to recheck it. Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
This function always returns 0, so just use void and remove the bogus checking at the only call site. Link: https://lore.kernel.org/r/20191029062745.7932-6-leon@kernel.orgSigned-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
Ensure that MAD output buffer is zero-based allocated in all the callers of process_mad and remove the various memset()'s from the drivers. Link: https://lore.kernel.org/r/20191029062745.7932-3-leon@kernel.orgSigned-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
Function always returns zero, just delete it. Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
Trivial cleanup to fix the following warning: drivers/infiniband/hw/qib/qib_iba6120.c:1420: warning: bad line: Fixes: f931551b ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters") Link: https://lore.kernel.org/r/20191029062745.7932-15-leon@kernel.orgSigned-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
Delete never implemented and used MAD functions. Link: https://lore.kernel.org/r/20191029062745.7932-2-leon@kernel.orgSigned-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Bart Van Assche authored
Although the mentioned patch fixes a use-after-free bug, it introduces a hang during shutdown. Since the latter is worse, revert this patch. Link: https://lore.kernel.org/r/20191101204756.182162-1-bvanassche@acm.orgReported-by:
Honggang Li <honli@redhat.com> Fixes: 9b64f7d0 ("RDMA/srpt: Postpone HCA removal until after configfs directory removal") Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Acked-by:
Honggang Li <honli@redhat.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Kamal Heib authored
There is no need to return always zero for function which is not supported. Fixes: ac1b36e5 ("qedr: Add support for user context verbs") Link: https://lore.kernel.org/r/20191028155931.1114-5-kamalheib1@gmail.comSigned-off-by:
Kamal Heib <kamalheib1@gmail.com> Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Kamal Heib authored
There is no need to return always zero for function which is not supported. Fixes: fe2caefc ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter") Link: https://lore.kernel.org/r/20191028155931.1114-4-kamalheib1@gmail.comSigned-off-by:
Kamal Heib <kamalheib1@gmail.com> Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Kamal Heib authored
There is no need to return always zero for function which is not supported. Fixes: 9a443537 ("IB/hns: Add driver files for hns RoCE driver") Link: https://lore.kernel.org/r/20191028155931.1114-3-kamalheib1@gmail.comSigned-off-by:
Kamal Heib <kamalheib1@gmail.com> Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Kamal Heib authored
Improve return code from ib_modify_port() by doing the following: - Use "-EOPNOTSUPP" instead "-ENOSYS" which is the proper return code - Allow only fake IB_PORT_CM_SUP manipulation for RoCE providers that didn't implement the modify_port callback, otherwise return "-EOPNOTSUPP" Fixes: 61e0962d ("IB: Avoid ib_modify_port() failure for RoCE devices") Link: https://lore.kernel.org/r/20191028155931.1114-2-kamalheib1@gmail.comSigned-off-by:
Kamal Heib <kamalheib1@gmail.com> Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Michal Kalderon authored
This patch adds the iWARP specific doorbells to the doorbell recovery mechanism. Link: https://lore.kernel.org/r/20191030094417.16866-9-michal.kalderon@marvell.comSigned-off-by:
Ariel Elior <ariel.elior@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Michal Kalderon authored
Use the doorbell recovery mechanism to register rdma related doorbells that will be restored in case there is a doorbell overflow attention. Link: https://lore.kernel.org/r/20191030094417.16866-8-michal.kalderon@marvell.comSigned-off-by:
Ariel Elior <ariel.elior@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Michal Kalderon authored
Remove all functions related to mmap from qedr and use the common API. Link: https://lore.kernel.org/r/20191030094417.16866-7-michal.kalderon@marvell.comSigned-off-by:
Ariel Elior <ariel.elior@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Michal Kalderon authored
Remove the functions related to managing the mmap_xa database. This code is now common in ib_core. Link: https://lore.kernel.org/r/20191030094417.16866-6-michal.kalderon@marvell.comSigned-off-by:
Ariel Elior <ariel.elior@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
Bernard Metzler <bmt@zurich.ibm.com> Reviewed-by:
Bernard Metzler <bmt@zurich.ibm.com> Tested-by:
Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Michal Kalderon authored
Remove the functions related to managing the mmap_xa database. This code was replaced with common code in ib_core. Link: https://lore.kernel.org/r/20191030094417.16866-5-michal.kalderon@marvell.comSigned-off-by:
Ariel Elior <ariel.elior@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Michal Kalderon authored
The rdma_user_mmap_io interface created a common interface for drivers to correctly map hw resources and zap them once the ucontext is destroyed enabling the drivers to safely free the hw resources. However, this meant the drivers need to delay freeing the resource to the ucontext destroy phase to ensure they were no longer mapped. The new mechanism for a common way of handling user/driver address mapping enabled notifying the driver if all umap_priv mappings were removed, and enabled freeing the hw resources when they are done with and not delay it until ucontext destroy. Since not all drivers use the mechanism, NULL can be sent to the rdma_user_mmap_io interface to continue working as before. Drivers that use the mmap_xa interface can pass the entry being mapped to the rdma_user_mmap_io function to be linked together. Link: https://lore.kernel.org/r/20191030094417.16866-4-michal.kalderon@marvell.comSigned-off-by:
Ariel Elior <ariel.elior@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Michal Kalderon authored
Create some common API's for adding entries to a xa_mmap. Searching for an entry and freeing one. The general approach is copied from the EFA driver and improved to be more general and do more to help the drivers. Integration with the core allows a reference counted scheme with a free function so that the driver can know when its mmaps are all gone. This significant new functionality will be helpful for drivers to have the correct lifetime model for mmap objects. Link: https://lore.kernel.org/r/20191030094417.16866-3-michal.kalderon@marvell.comSigned-off-by:
Ariel Elior <ariel.elior@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
- 05 Nov, 2019 1 commit
-
-
Michal Kalderon authored
Move functionality that is called by the driver, which is related to umap, to a new file that will be linked in ib_core. This is a first step in later enabling ib_uverbs to be optional. vm_ops is now initialized in ib_uverbs_mmap instead of priv_init to avoid having to move all the rdma_umap functions as well. Link: https://lore.kernel.org/r/20191030094417.16866-2-michal.kalderon@marvell.comSuggested-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Ariel Elior <ariel.elior@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
- 31 Oct, 2019 2 commits
-
-
Michael Guralnik authored
Linux can run in all sorts of physical machines and VMs where write combining may or may not be supported. Currently there is no way to reliably tell if the system supports WC, or not. The driver uses WC to optimize posting work to the HCA, and getting this wrong in either direction can cause a significant performance loss. Add a test in mlx5_ib initialization process to test whether write-combining is supported on the machine. The test will run as part of the enable_driver callback to ensure that the test runs after the device is setup and can create and modify the QP needed, but runs before the device is exposed to the users. The test opens UD QP and posts NOP WQEs, the WQE written to the BlueFlame is different from the WQE in memory, requesting CQE only on the BlueFlame WQE. By checking whether we received a completion on one of these WQEs we can know if BlueFlame succeeded and this write-combining must be supported. Change reporting of BlueFlame support to be dependent on write-combining support instead of the FW's guess as to what the machine can do. Link: https://lore.kernel.org/r/20191027062234.10993-1-leon@kernel.orgSigned-off-by:
Michael Guralnik <michaelgur@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
Returned value from mlx5_mr_cache_alloc() is checked to be error or real pointer. Return proper error code instead of NULL which is not checked later. Fixes: 81713d37 ("IB/mlx5: Add implicit MR support") Link: https://lore.kernel.org/r/20191029055721.7192-1-leon@kernel.orgSigned-off-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
- 29 Oct, 2019 1 commit
-
-
Arnd Bergmann authored
This is not the first attempt to fix building random configurations, unfortunately the attempt in commit a07fc0bb ("RDMA/hns: Fix build error") caused a new problem when CONFIG_INFINIBAND_HNS_HIP06=m and CONFIG_INFINIBAND_HNS_HIP08=y: drivers/infiniband/hw/hns/hns_roce_main.o:(.rodata+0xe60): undefined reference to `__this_module' Revert commits a07fc0bb ("RDMA/hns: Fix build error") and a3e2d4c7 ("RDMA/hns: remove obsolete Kconfig comment") to get back to the previous state, then fix the issues described there differently, by adding more specific dependencies: INFINIBAND_HNS can now only be built-in if at least one of HNS or HNS3 are built-in, and the individual back-ends are only available if that code is reachable from the main driver. Fixes: a07fc0bb ("RDMA/hns: Fix build error") Fixes: a3e2d4c7 ("RDMA/hns: remove obsolete Kconfig comment") Fixes: dd74282d ("RDMA/hns: Initialize the PCI device for hip08 RoCE") Fixes: 08805fdb ("RDMA/hns: Split hw v1 driver from hns roce driver") Link: https://lore.kernel.org/r/20191007211826.3361202-1-arnd@arndb.deSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
- 28 Oct, 2019 10 commits
-
-
Jason Gunthorpe authored
Jason Gunthorpe says: ==================== In order to hoist the interval tree code out of the drivers and into the mmu_notifiers it is necessary for the drivers to not use the interval tree for other things. This series replaces the interval tree with an xarray and along the way re-aligns all the locking to use a sensible SRCU model where the 'update' step is done by modifying an xarray. The result is overall much simpler and with less locking in the critical path. Many functions were reworked for clarity and small details like using 'imr' to refer to the implicit MR make the entire code flow here more readable. This also squashes at least two race bugs on its own, and quite possibily more that haven't been identified. ==================== Merge conflicts with the odp statistics patch resolved. * branch 'odp_rework': RDMA/odp: Remove broken debugging call to invalidate_range RDMA/mlx5: Do not race with mlx5_ib_invalidate_range during create and destroy RDMA/mlx5: Do not store implicit children in the odp_mkeys xarray RDMA/mlx5: Rework implicit ODP destroy RDMA/mlx5: Avoid double lookups on the pagefault path RDMA/mlx5: Reduce locking in implicit_mr_get_data() RDMA/mlx5: Use an xarray for the children of an implicit ODP RDMA/mlx5: Split implicit handling from pagefault_mr RDMA/mlx5: Set the HW IOVA of the child MRs to their place in the tree RDMA/mlx5: Lift implicit_mr_alloc() into the two routines that call it RDMA/mlx5: Rework implicit_mr_get_data RDMA/mlx5: Delete struct mlx5_priv->mkey_table RDMA/mlx5: Use a dedicated mkey xarray for ODP RDMA/mlx5: Split sig_err MR data into its own xarray RDMA/mlx5: Use SRCU properly in ODP prefetch Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
invalidate_range() also obtains the umem_mutex which is being held at this point, so if this path were was ever called it would deadlock. Thus conclude the debugging never triggers and rework it into a simple WARN_ON and leave things as they are. While here add a note to explain how we could possibly get inconsistent page pointers. Link: https://lore.kernel.org/r/20191009160934.3143-16-jgg@ziepe.caSigned-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
For creation, as soon as the umem_odp is created the notifier can be called, however the underlying MR may not have been setup yet. This would cause problems if mlx5_ib_invalidate_range() runs. There is some confusing/ulocked/racy code that might by trying to solve this, but without locks it isn't going to work right. Instead trivially solve the problem by short-circuiting the invalidation if there are not yet any DMA mapped pages. By definition there is nothing to invalidate in this case. The create code will have the umem fully setup before anything is DMA mapped, and npages is fully locked by the umem_mutex. For destroy, invalidate the entire MR at the HW to stop DMA then DMA unmap the pages before destroying the MR. This drives npages to zero and prevents similar racing with invalidate while the MR is undergoing destruction. Arguably it would be better if the umem was created after the MR and destroyed before, but that would require a big rework of the MR code. Fixes: 6aec21f6 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/20191009160934.3143-15-jgg@ziepe.caReviewed-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
These mkeys are entirely internal and are never used by the HW for page fault. They should also never be used by userspace for prefetch. Simplify & optimize things by not including them in the xarray. Since the prefetch path can now never see a child mkey there is no need for the second synchronize_srcu() during imr destroy. Link: https://lore.kernel.org/r/20191009160934.3143-14-jgg@ziepe.caReviewed-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
Use SRCU in a sensible way by removing all MRs in the implicit tree from the two xarrays (the update operation), then a synchronize, followed by a normal single threaded teardown. This is only a little unusual from the normal pattern as there can still be some work pending in the unbound wq that may also require a workqueue flush. This is tracked with a single atomic, consolidating the redundant existing atomics and wait queue. For understand-ability the entire ODP implicit create/destroy flow now largely exists in a single pair of functions within odp.c, with a few support functions for tearing down an unused child. Link: https://lore.kernel.org/r/20191009160934.3143-13-jgg@ziepe.caReviewed-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
Now that the locking is simplified combine pagefault_implicit_mr() with implicit_mr_get_data() so that we sweep over the idx range only once, and do the single xlt update at the end, after the child umems are setup. This avoids double iteration/xa_loads plus the sketchy failure path if the xa_load() fails. Link: https://lore.kernel.org/r/20191009160934.3143-12-jgg@ziepe.caReviewed-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
Now that the child MRs are stored in an xarray we can rely on the SRCU lock to protect the xa_load and use xa_cmpxchg on the slow allocation path to resolve races with concurrent page fault. This reduces the scope of the critical section of umem_mutex for implicit MRs to only cover mlx5_ib_update_xlt, and avoids taking a lock at all if the child MR is already in the xarray. This makes it consistent with the normal ODP MR critical section for umem_lock, and the locking approach used for destroying an unusued implicit child MR. The MLX5_IB_UPD_XLT_ATOMIC is no longer needed in implicit_get_child_mr() since it is no longer called with any locks. Link: https://lore.kernel.org/r/20191009160934.3143-11-jgg@ziepe.caReviewed-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
Currently the child leaves are stored in the shared interval tree and every lookup for a child must be done under the interval tree rwsem. This is further complicated by dropping the rwsem during iteration (ie the odp_lookup(), odp_next() pattern), which requires a very tricky an difficult to understand locking scheme with SRCU. Instead reserve the interval tree for the exclusive use of the mmu notifier related code in umem_odp.c and give each implicit MR a xarray containing all the child MRs. Since the size of each child is 1GB of VA, a 1 level xarray will index 64G of VA, and a 2 level will index 2TB, making xarray a much better data structure choice than an interval tree. The locking properties of xarray will be used in the next patches to rework the implicit ODP locking scheme into something simpler. At this point, the xarray is locked by the implicit MR's umem_mutex, and read can also be locked by the odp_srcu. Link: https://lore.kernel.org/r/20191009160934.3143-10-jgg@ziepe.caReviewed-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
The single routine has a very confusing scheme to advance to the next child MR when working on an implicit parent. This scheme can only be used when working with an implicit parent and must not be triggered when working on a normal MR. Re-arrange things by directly putting all the single-MR stuff into one function and calling it in a loop for the implicit case. Simplify some of the error handling in the new pagefault_real_mr() to remove unneeded gotos. Link: https://lore.kernel.org/r/20191009160934.3143-9-jgg@ziepe.caReviewed-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
Instead of rewriting all the IOVA's to 0 as things progress down the tree make the IOVA of the children equal to placement in the tree. This makes things easier to understand by keeping mmkey.iova == HW configuration. Link: https://lore.kernel.org/r/20191009160934.3143-8-jgg@ziepe.caReviewed-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-