- 04 Mar, 2010 40 commits
-
-
Andrea Gelmini authored
ERROR: do not initialise externals to 0 or NULL +unsigned int ui_InterruptStatus = 0; WARNING: braces {} are not necessary for single statement blocks + else { + outl(0x6, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ); + } /* else if(data[1] == ADDIDATA_OR) */ WARNING: braces {} are not necessary for single statement blocks + if (data[1] == 1) { + *data = ui_InterruptStatus; + } /* if(data[1]==1) */ Signed-off-by:Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Andrea Gelmini authored
ERROR: code indent should use tabs where possible + const struct comedi_lrange *pr_AiRangelist;^I/* rangelist for A/D */$ ERROR: code indent should use tabs where possible + const struct comedi_lrange *pr_AoRangelist;^I/* rangelist for D/A */$ Signed-off-by:
-
Andrea Gelmini authored
WARNING: braces {} are not necessary for any arm of this statement + if (i_Counter == 0) { [...] + } else { [...] Signed-off-by: -
d binderman authored
Signed-off-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
-
Alessio Igor Bogani authored
BKL isn't anymore present into these files thus it is no necessary still include smp_lock.h. Signed-off-by:
Alessio Igor Bogani <abogani@texware.it> Signed-off-by:
-
Florian Schilhabel authored
Signed-off-by:
Florian Schilhabel <florian.c.schilhabel@googlemail.com> Signed-off-by:
-
Florian Schilhabel authored
currently, interface statistics look like this: wlan0 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx inet addr:xxx.xxx.xxx.xxx Bcast:xxx.xxx.xxx.xxx Mask:xxx.xxx.xxx.xxx UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:435 errors:0 dropped:1 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:456758 (446.0 Kb) TX bytes:0 (0.0 b) after re-enabling the tx-stats it looks like this: wlan0 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx inet addr:xxx.xxx.xxx.xxx Bcast:xxx.xxx.xxx.xxx Mask:xxx.xxx.xxx.xxx UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1269 errors:0 dropped:1 overruns:0 frame:0 TX packets:1049 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1667442 (1.5 Mb) TX bytes:82606 (80.6 Kb) Signed-off-by: -
Florian Schilhabel authored
according to 'linux device drivers', ENOENT, ECONNRESET, ESHUTDOWN are not real transmission errors. also, a little cosmetics. Signed-off-by:
-
Florian Schilhabel authored
Because the Firmware is loaded from RTL8192SU/rtl8192sfw.bin, it it save, to remove it from r8192SU_HWImg.c Signed-off-by:
-
Sven-Thorsten Dietrich authored
This fixes some RT-triggered compile errors and typos. Signed-off-by:
Sven-Thorsten Dietrich <sdietrich@novell.com> Acked-by:
Marek Lindner <lindner_marek@yahoo.de> Acked-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Ameya Palande authored
This patch does following improvements: 1. Follow kernel style for comments 2. Reorganize code for readability improvement 3. Use PCI helper macros 4. Use __devinit, __devexit, __devexit_p at necessary places 5. Mark functions and data as static when it is not exported Signed-off-by:
Ameya Palande <2ameya@gmail.com> Cc: Naren Sankar <nsankar@broadcom.com> Cc: Jarod Wilson <jarod@wilsonet.com> Cc: Scott Davilla <davilla@4pi.com> Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by:
-
Jim Dog authored
This is a patch to the prism2usb.c that fixes one line which was over the 80 character limit by wrapping it to a new line and removes a commented out configuration for a ZyDAS ZD1201 device since support for this device with this driver is now deprecated. Signed-off-by:
Jim Dog <jimdog@northern-indymedia.org> Signed-off-by:
-
Randy Dunlap authored
sparse warns that: drivers/staging/pohmelfs/inode.c:1797: warning: initialization from incompatible pointer type so fix pohmelfs_write_inode() to have the expected parameters. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Randy Dunlap authored
Fix prism2fw.c printk format warning: drivers/staging/wlan-ng/prism2fw.c:209: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' Signed-off-by:
-
Randy Dunlap authored
The rtl8192* drivers in staging use semaphores, so they need to #include <linux/semaphore.h>. (similar to staging-rtl8187se-needs-semaphore.h.patch) drivers/staging/rtl8192e/ieee80211/ieee80211.h:2038: error: field 'ips_sem' has incomplete type drivers/staging/rtl8192e/ieee80211/ieee80211.h:2249: error: field 'wx_sem' has incomplete type drivers/staging/rtl8192e/ieee80211/ieee80211.h:2250: error: field 'scan_sem' has incomplete type drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c:442: error: implicit declaration of function 'down' drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c:500: error: implicit declaration of function 'up' drivers/staging/rtl8192e/ieee80 211/ieee80211_softmac.c:3165: error: implicit declaration of function 'sema_init' drivers/staging/rtl8192su/ieee80211/ieee80211.h:1330: error: field 'wx_sem' has incomplete type drivers/staging/rtl8192su/ieee80211/ieee80211.h:1331: error: field 'scan_sem' has incomplete type drivers/staging/rtl8192u/ieee80211/ieee80211.h:2010: error: field 'wx_sem' has incomplete type drivers/staging/rtl8192u/ieee80211/ieee80211.h:2011: error: field 'scan_sem' has incomplete type Signed-off-by:
-
Sylvain Trias authored
Fixed a coding style issue. Signed-off-by:
Sylvain Trias <bozo@nobodix.org> Signed-off-by:
-
Frank Mori Hess authored
Increased timeout for digital output dma loading, due to report of it being too short for some hardware. Signed-off-by:
Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by:
-
OGAWA Hirofumi authored
Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Benjamin Adolphi authored
This fixes all checkpatch issues in the amplc_pc236 comedi driver. Signed-off-by:
Benjamin Adolphi <b.adolphi@gmail.com> Signed-off-by:
-
Benjamin Adolphi authored
This fixes all checkpatch issues in the amplc_dio200 comedi driver. Signed-off-by:
-
Benjamin Adolphi authored
This fixes all checkpatch issues in the aio_iiro_16 comedi driver. Signed-off-by:
-
Stewart Robertson authored
This is a patch to the ni_labpc.c file that fixes the brace warnings and comments over 80 characters found by the checkpatch.pl tool. Some code still goes over 80 characters because I didn't know what to do with it. Signed-off-by:
Stewart Robertson <stewart_r@aliencamel.com> Signed-off-by:
-
Marek Lindner authored
Make sure that batman-adv does not process packets before its initialization is complete. Some sanity checks added to the receiver function. Signed-off-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Marek Lindner authored
skb_share_check() returns NULL if it can't allocate more memory but it still frees the skbuff. Signed-off-by:
-
Andrew Lunn authored
The vis code takes a copy of the data inside the skbuf if it is interesting for us, so we always need to release the skbuf. Reported-by:
Linus Luessing <linus.luessing@web.de> Signed-off-by:
-
Linus Luessing authored
This fixes the bug discovered by Marek Lindner which did not allow turning on the vis-server before an interface has been added. With this patch we are using a global atomic variable for activating and deactiating the vis-server-mode, which can be used before inserting an interface. Signed-off-by:
-
Marek Lindner authored
This patch removes a variable that became obsolete since the skb handling replaced the packet handling thread. Signed-off-by:
-
Marek Lindner authored
The routing code has 2 sections which warn about ttl exceeded. The corresponding warnings were identical which makes it hard to debug. In addition, batman-adv does not need to warn about ttl exceeded in case we encountered an echo request as this is commonly used to generate traceroute graphs. Signed-off-by:
-
Simon Wunderlich authored
As in other parts of batman-adv, we should not lock while sending a packet but keep the lock held for as short as possible. Additionally, we should check whether the interface is active, otherwise batman_if->net_dev might not be available ... Signed-off-by:
-
Sven Eckelmann authored
The code which uses the raw packet sockets was removed. The only related dependencies are the skb and netdev handling code. This is provided by NET in Kconfig. Signed-off-by:
Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by:
-
Mark Brown authored
Staticise a number of functions which aren't exported outside their source files, and also add a __user annotation for the buffer in iio_event_chrdev_read(). Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
-
Graham M Howe authored
This is a patch to the ni_daq_700.c file that fixes up brace and 80 character warnings found by the checkpatch.pl tool Signed-off-by:
Graham M Howe <gman.1352@googlemail.com> Signed-off-by:
-
Arthur Benilov authored
VMIVME-7805 board has a special control register that has to be used in order to activate the VME bus access via the Universe II bridge. This control register also handles endianess convertion. Signed-off-by:
Arthur Benilov <arthur.benilov@iba-group.com> Signed-off-by:
Vincent Bossier <vincent.bossier@iba-group.com> Acked-by:
Martyn Welch <martyn.welch@ge.com> Signed-off-by:
-
Arthur Benilov authored
For VME device I/O operations on master windows the user driver tends to use kern_buf buffer array which is not allocated. This causes an error when reading from master window device files. Signed-off-by:
-
Arthur Benilov authored
When requesting slave resources A16 addressing mode flag is used to find available windows. Since the ca91cx42 bridge only supports two A16 slave windows but four are requested, the driver fails to initialize. The flag has been changed to A24, which is supported by all slave windows. Signed-off-by:
-
Arthur Benilov authored
Provide vme_user_llseek() implementation. Signed-off-by:
-
Martyn Welch authored
Remove the code from the drivers that we are not going to implement before submitting for review. Signed-off-by:
-
Martyn Welch authored
Sort out slot detection on the ca91cx42. Signed-off-by:
-
Martyn Welch authored
Add support for Master Read-Modify-Write cycles on the ca91cx42. Signed-off-by:
-
Martyn Welch authored
The ca91cx42 driver currently incorrectly handles master windows, setting and retrieving the sizing parameters incorrectly. Also, in the slave window handling, it uses an incorrectly set variable. Signed-off-by:
-
