- 04 May, 2016 9 commits
-
-
Lokesh Vutla authored
commit 3ca4a238 upstream. Commit 127500cc ("ARM: OMAP2+: Only write the sysconfig on idle when necessary") talks about verification of sysconfig cache value before updating it, only during idle path. But the patch is adding the verification in the enable path. So, adding the check in a proper place as per the commit description. Not keeping this check during enable path as there is a chance of losing context and it is safe to do on idle as the context of the register will never be lost while the device is active. Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Acked-by:
Tero Kristo <t-kristo@ti.com> Cc: Jon Hunter <jonathanh@nvidia.com> Fixes: commit 127500cc "ARM: OMAP2+: Only write the sysconfig on idle when necessary" [paul@pwsan.com: appears to have been caused by my own mismerge of the originally posted patch] Signed-off-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nishanth Menon authored
commit 456e8d53 upstream. The following commits: commit 3fa60975 ("ARM: omap2: restore OMAP4 barrier behaviour") commit f746929f ("Revert "ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688"") and commit ea827ad5 ("ARM: DRA7: Provide proper IO map table") came in around the same time, unfortunately this seem to have missed initializing the barrier for DRA7 platforms - omap5_map_io was reused for dra7 till it was split out by the last patch. barrier_init needs to be hence carried forward as it is valid for DRA7 family of processors as they are for OMAP5. Fixes: ea827ad5 ("ARM: DRA7: Provide proper IO map table") Reported-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reported-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Nishanth Menon <nm@ti.com> Reviewed-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Patrick Uiterwijk authored
commit 199831c7 upstream. The USB2 port for Armada 38x is defined to be at 58000, not at 50000. Fixes: 2d0a7add ("ARM: Kirkwood: Add support for many Synology NAS devices") Signed-off-by:
Patrick Uiterwijk <patrick@puiterwijk.org> Acked-by:
Imre Kaloz <kaloz@openwrt.org> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Lokesh Vutla authored
commit cfe1580a upstream. commit 55ee7017 ("arm: omap2: board-generic: use omap4_local_timer_init for AM437x") makes synctimer32k as the clocksource on AM43xx. By default the synctimer32k is clocked by 32K RTC OSC on AM43xx. But this 32K RTC OSC is not available on epos boards which makes it fail to boot. Synctimer32k can also be clocked by a peripheral PLL, so making this as clock parent for synctimer3k on epos boards. Fixes: 55ee7017 ("arm: omap2: board-generic: use omap4_local_timer_init for AM437x") Reported-by:
-
Marc Zyngier authored
commit 1c5631c7 upstream. On a host that runs NTP, corrections can have a direct impact on the background timer that we program on the behalf of a vcpu. In particular, NTP performing a forward correction will result in a timer expiring sooner than expected from a guest point of view. Not a big deal, we kick the vcpu anyway. But on wake-up, the vcpu thread is going to perform a check to find out whether or not it should block. And at that point, the timer check is going to say "timer has not expired yet, go back to sleep". This results in the timer event being lost forever. There are multiple ways to handle this. One would be record that the timer has expired and let kvm_cpu_has_pending_timer return true in that case, but that would be fairly invasive. Another is to check for the "short sleep" condition in the hrtimer callback, and restart the timer for the remaining time when the condition is detected. This patch implements the latter, with a bit of refactoring in order to avoid too much code duplication. Reported-by:
Alexander Graf <agraf@suse.de> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
David Matlack authored
commit fc5b7f3b upstream. An interrupt handler that uses the fpu can kill a KVM VM, if it runs under the following conditions: - the guest's xcr0 register is loaded on the cpu - the guest's fpu context is not loaded - the host is using eagerfpu Note that the guest's xcr0 register and fpu context are not loaded as part of the atomic world switch into "guest mode". They are loaded by KVM while the cpu is still in "host mode". Usage of the fpu in interrupt context is gated by irq_fpu_usable(). The interrupt handler will look something like this: if (irq_fpu_usable()) { kernel_fpu_begin(); [... code that uses the fpu ...] kernel_fpu_end(); } As long as the guest's fpu is not loaded and the host is using eager fpu, irq_fpu_usable() returns true (interrupted_kernel_fpu_idle() returns true). The interrupt handler proceeds to use the fpu with the guest's xcr0 live. kernel_fpu_begin() saves the current fpu context. If this uses XSAVE[OPT], it may leave the xsave area in an undesirable state. According to the SDM, during XSAVE bit i of XSTATE_BV is not modified if bit i is 0 in xcr0. So it's possible that XSTATE_BV[i] == 1 and xcr0[i] == 0 following an XSAVE. kernel_fpu_end() restores the fpu context. Now if any bit i in XSTATE_BV == 1 while xcr0[i] == 0, XRSTOR generates a #GP. The fault is trapped and SIGSEGV is delivered to the current process. Only pre-4.2 kernels appear to be vulnerable to this sequence of events. Commit 653f52c3 ("kvm,x86: load guest FPU context more eagerly") from 4.2 forces the guest's fpu to always be loaded on eagerfpu hosts. This patch fixes the bug by keeping the host's xcr0 loaded outside of the interrupts-disabled region where KVM switches into guest mode. Suggested-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
David Matlack <dmatlack@google.com> [Move load after goto cancel_injection. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Tony Luck authored
commit a3125494 upstream. When we loop over all queued machine check error records to pass them to the registered notifiers we use llist_for_each_entry(). But the loop calls gen_pool_free() for the entry in the body of the loop - and then the iterator looks at node->next after the free. Use llist_for_each_entry_safe() instead. Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/0205920@agluck-desk.sc.intel.com Link: http://lkml.kernel.org/r/1459929916-12852-4-git-send-email-bp@alien8.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ming Lei authored
commit a7297a6a upstream. Starting from commit e36f6204(block: split bios to max possible length), block core starts to split bio in the middle of bvec. Unfortunately loop dio/aio doesn't consider this situation, and always treat 'iter.iov_offset' as zero. Then filesystem corruption is observed. This patch figures out the offset of the base bvevc via 'bio->bi_iter.bi_bvec_done' and fixes the issue by passing the offset to iov iterator. Fixes: e36f6204 (block: split bios to max possible length) Cc: Keith Busch <keith.busch@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Ming Lei authored
commit b30a337c upstream. The initialization of partition's percpu_ref should have been done before sending out KOBJ_ADD uevent, which may cause userspace to read partition table. So the uninitialized percpu_ref may be accessed in data path. This patch fixes this issue reported by Naveen. Reported-by:
Naveen Kaje <nkaje@codeaurora.org> Tested-by:
-
- 20 Apr, 2016 31 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
commit e5bdfd50 upstream. This reverts commit d8f00cd6. Tony writes: This upstream commit is causing an oops: d8f00cd6 ("usb: hub: do not clear BOS field during reset device") This patch has already been included in several -stable kernels. Here are the affected kernels: 4.5.0-rc4 (current git) 4.4.2 4.3.6 (currently in review) 4.1.18 3.18.27 3.14.61 How to reproduce the problem: Boot kernel with slub debugging enabled (otherwise memory corruption will cause random oopses later instead of immediately) Plug in USB 3.0 disk to xhci USB 3.0 port dd if=/dev/sdc of=/dev/null bs=65536 (where /dev/sdc is the USB 3.0 disk) Unplug USB cable while dd is still going Oops is immediate: Reported-by:
Tony Battersby <tonyb@cybernetics.com> Cc: Du, Changbin <changbin.du@intel.com> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Vladis Dronov authored
commit fa52bd50 upstream. The usbvision driver crashes when a specially crafted usb device with invalid number of interfaces or endpoints is detected. This fix adds checks that the device has proper configuration expected by the driver. Reported-by:
Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Liviu Dudau authored
commit 70bc916b upstream. ion_buffer_create() will allocate a buffer and then create a DMA mapping for it, but it forgot to set the length of the page entries. Signed-off-by:
Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by:
Jon Medhurst <tixy@linaro.org> Acked-by:
Laura Abbott <labbott@redhat.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Bjorn Helgaas authored
commit 6c777e87 upstream. 991de2e5 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") appeared in v4.3 and helps support IOAPIC hotplug. Олег reported that the Elcus-1553 TA1-PCI driver worked in v4.2 but not v4.3 and bisected it to 991de2e5. Sunjin reported that the RocketRAID 272x driver worked in v4.2 but not v4.3. In both cases booting with "pci=routirq" is a workaround. I think the problem is that after 991de2e5, we no longer call pcibios_enable_irq() for upstream bridges. Prior to 991de2e5, when a driver called pci_enable_device(), we recursively called pcibios_enable_irq() for upstream bridges via pci_enable_bridge(). After 991de2e5, we call pcibios_enable_irq() from pci_device_probe() instead of the pci_enable_device() path, which does *not* call pcibios_enable_irq() for upstream bridges. Revert 991de2e5 to fix these driver regressions. Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211 Fixes: 991de2e5 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") Reported-and-tested-by:
Олег Мороз <oleg.moroz@mcc.vniiem.ru> Reported-by:
Sunjin Yang <fan4326@gmail.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Rafael J. Wysocki <rafael@kernel.org> CC: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 67b4eab9 upstream. Revert 811a4e6f ("PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed"). This is part of reverting 991de2e5 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") to fix regressions it introduced. Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211 Fixes: 991de2e5 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") Signed-off-by:
-
Bjorn Helgaas authored
commit fe25d078 upstream. Revert 8affb487 ("x86/PCI: Don't alloc pcibios-irq when MSI is enabled"). This is part of reverting 991de2e5 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") to fix regressions it introduced. Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211 Fixes: 991de2e5 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") Signed-off-by:
-
Alan Stern authored
commit 972e6a99 upstream. The usbhid driver has inconsistently duplicated code in its post-reset, resume, and reset-resume pathways. reset-resume doesn't check HID_STARTED before trying to restart the I/O queues. resume fails to clear the HID_SUSPENDED flag if HID_STARTED isn't set. resume calls usbhid_restart_queues() with usbhid->lock held and the others call it without holding the lock. The first item in particular causes a problem following a reset-resume if the driver hasn't started up its I/O. URB submission fails because usbhid->urbin is NULL, and this triggers an unending reset-retry loop. This patch fixes the problem by creating a new subroutine, hid_restart_io(), to carry out all the common activities. It also adds some checks that were missing in the original code: After a reset, there's no need to clear any halted endpoints. After a resume, if a reset is pending there's no need to restart any I/O until the reset is finished. After a resume, if the interrupt-IN endpoint is halted there's no need to submit the input URB until the halt has been cleared. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Daniel Fraga <fragabr@gmail.com> Tested-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Benjamin Tissoires authored
commit 580549ef upstream. Looks like recent changes in the Wacom driver made the Bamboo ONE crashes. The tablet behaves as if it was a regular Bamboo device with pen, touch and pad, but there is no physical pad connected to it. The weird part is that the pad is still sending events and given that there is no input node connected to it, we get anull pointer exception. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1317116Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
-
Kailang Yang authored
commit adcdd0d5 upstream. This is Dell usb dock audio workaround. It was fixed the master volume keep lower. [Some background: the patch essentially skips the controls of a couple of FU volumes. Although the firmware exposes the dB and the value information via the usb descriptor, changing the values (we set the min volume as default) screws up the device. Although this has been fixed in the newer firmware, the devices are shipped with the old firmware, thus we need the workaround in the driver side. -- tiwai] Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Dennis Kadioglu authored
commit b4203ff5 upstream. Plantronics BT300 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x1". This patch adds the USB ID of the BT300 to quirks.c and avoids those error messages. Signed-off-by:
Dennis Kadioglu <denk@post.com> Signed-off-by:
-
Takashi Iwai authored
commit f03b24a8 upstream. Phoenix Audio TMX320 gives the similar error when the sample rate is asked: usb 2-1.3: 2:1: cannot get freq at ep 0x85 usb 2-1.3: 1:1: cannot get freq at ep 0x2 .... Add the corresponding USB-device ID (1de7:0014) to snd_usb_get_sample_rate_quirk() list. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110221Signed-off-by:
-
Sven Eckelmann authored
commit c636b95e upstream. The Lenovo Thinkpad T460s requires the alc_fixup_tpt440_dock as well in order to get working sound output on the docking stations headphone jack. Patch tested on a Thinkpad T460s (20F9CT01WW) using a ThinkPad Ultradock on kernel 4.4.6. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Tested-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Hui Wang authored
commit e549d190 upstream. The front mic jack (pink color) can't detect any plug or unplug. After applying this fix, both detecting function and recording function work well. BugLink: https://bugs.launchpad.net/bugs/1564712Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Takashi Iwai authored
commit f883982d upstream. HP EliteBook 755 G2 with ALC3228 (ALC280) codec [103c:221c] requires the known fixup (ALC269_FIXUP_HEADSET_MIC) for making the headset mic working. Also, it suffers from the loopback noise problem, so we should disable aamix path as well. Reported-by:
Derick Eddington <derick.eddington@gmail.com> Signed-off-by:
-
David Henningsson authored
commit 2ae95577 upstream. On one of the machines we enable, we found that the actual speaker volume did not always correspond to the volume set in alsamixer. This patch fixes that problem. This patch was orginally written by Kailang @ Realtek, I've rebased it to fit sound git master. BugLink: https://bugs.launchpad.net/bugs/1549660Co-Authored-By:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Adrian Hunter authored
commit 01d6b2a4 upstream. Add support and PCI IDs for more Broxton host controllers Other BXT IDs were added in v4.4 so cc'ing stable. This patch is dependent on commit 163cbe31 ("mmc: sdhci-pci: Fix card detect race for Intel BXT/APL") but that is already in stable since v4.4.4. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Peter Zijlstra authored
commit 28a967c3 upstream. Because event_sched_out() checks event->pending_disable _before_ actually disabling the event, it can happen that the event fires after it checks but before it gets disabled. This would leave event->pending_disable set and the queued irq_work will try and process it. However, if the event trigger was during schedule(), the event might have been de-scheduled by the time the irq_work runs, and perf_event_disable_local() will fail. Fix this by checking event->pending_disable _after_ we call event->pmu->del(). This depends on the latter being a compiler barrier, such that the compiler does not lift the load and re-creates the problem. Tested-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
-
Peter Zijlstra authored
commit 13005627 upstream. In case of: err_file: fput(event_file), we'll end up calling perf_release() which in turn will free the event. Do not then free the event _again_. Tested-by:
-
Yang Shi authored
commit cf0a2543 upstream. BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 in_atomic(): 1, irqs_disabled(): 128, pid: 383, name: sh Preemption disabled at:[<ffff800000124c18>] kgdb_cpu_enter+0x158/0x6b8 CPU: 3 PID: 383 Comm: sh Tainted: G W 4.1.13-rt13 #2 Hardware name: Freescale Layerscape 2085a RDB Board (DT) Call trace: [<ffff8000000885e8>] dump_backtrace+0x0/0x128 [<ffff800000088734>] show_stack+0x24/0x30 [<ffff80000079a7c4>] dump_stack+0x80/0xa0 [<ffff8000000bd324>] ___might_sleep+0x18c/0x1a0 [<ffff8000007a20ac>] __rt_spin_lock+0x2c/0x40 [<ffff8000007a2268>] rt_read_lock+0x40/0x58 [<ffff800000085328>] single_step_handler+0x38/0xd8 [<ffff800000082368>] do_debug_exception+0x58/0xb8 Exception stack(0xffff80834a1e7c80 to 0xffff80834a1e7da0) 7c80: ffffff9c ffffffff 92c23ba0 0000ffff 4a1e7e40 ffff8083 001bfcc4 ffff8000 7ca0: f2000400 00000000 00000000 00000000 4a1e7d80 ffff8083 0049501c ffff8000 7cc0: 00005402 00000000 00aaa210 ffff8000 4a1e7ea0 ffff8083 000833f4 ffff8000 7ce0: ffffff9c ffffffff 92c23ba0 0000ffff 4a1e7ea0 ffff8083 001bfcc0 ffff8000 7d00: 4a0fc400 ffff8083 00005402 00000000 4a1e7d40 ffff8083 00490324 ffff8000 7d20: ffffff9c 00000000 92c23ba0 0000ffff 000a0000 00000000 00000000 00000000 7d40: 00000008 00000000 00080000 00000000 92c23b8b 0000ffff 92c23b8e 0000ffff 7d60: 00000038 00000000 00001cb2 00000000 00000005 00000000 92d7b498 0000ffff 7d80: 01010101 01010101 92be9000 0000ffff 00000000 00000000 00000030 00000000 [<ffff8000000833f4>] el1_dbg+0x18/0x6c This issue is similar with 62c6c61a("arm64: replace read_lock to rcu lock in call_break_hook"), but comes to single_step_handler. This also solves kgdbts boot test silent hang issue on 4.4 -rt kernel. Signed-off-by:
Yang Shi <yang.shi@linaro.org> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Filipe Manana authored
commit 56f23fdb upstream. If we rename an inode A (be it a file or a directory), create a new inode B with the old name of inode A and under the same parent directory, fsync inode B and then power fail, at log tree replay time we end up removing inode A completely. If inode A is a directory then all its files are gone too. Example scenarios where this happens: This is reproducible with the following steps, taken from a couple of test cases written for fstests which are going to be submitted upstream soon: # Scenario 1 mkfs.btrfs -f /dev/sdc mount /dev/sdc /mnt mkdir -p /mnt/a/x echo "hello" > /mnt/a/x/foo echo "world" > /mnt/a/x/bar sync mv /mnt/a/x /mnt/a/y mkdir /mnt/a/x xfs_io -c fsync /mnt/a/x <power failure happens> The next time the fs is mounted, log tree replay happens and the directory "y" does not exist nor do the files "foo" and "bar" exist anywhere (neither in "y" nor in "x", nor the root nor anywhere). # Scenario 2 mkfs.btrfs -f /dev/sdc mount /dev/sdc /mnt mkdir /mnt/a echo "hello" > /mnt/a/foo sync mv /mnt/a/foo /mnt/a/bar echo "world" > /mnt/a/foo xfs_io -c fsync /mnt/a/foo <power failure happens> The next time the fs is mounted, log tree replay happens and the file "bar" does not exists anymore. A file with the name "foo" exists and it matches the second file we created. Another related problem that does not involve file/data loss is when a new inode is created with the name of a deleted snapshot and we fsync it: mkfs.btrfs -f /dev/sdc mount /dev/sdc /mnt mkdir /mnt/testdir btrfs subvolume snapshot /mnt /mnt/testdir/snap btrfs subvolume delete /mnt/testdir/snap rmdir /mnt/testdir mkdir /mnt/testdir xfs_io -c fsync /mnt/testdir # or fsync some file inside /mnt/testdir <power failure> The next time the fs is mounted the log replay procedure fails because it attempts to delete the snapshot entry (which has dir item key type of BTRFS_ROOT_ITEM_KEY) as if it were a regular (non-root) entry, resulting in the following error that causes mount to fail: [52174.510532] BTRFS info (device dm-0): failed to delete reference to snap, inode 257 parent 257 [52174.512570] ------------[ cut here ]------------ [52174.513278] WARNING: CPU: 12 PID: 28024 at fs/btrfs/inode.c:3986 __btrfs_unlink_inode+0x178/0x351 [btrfs]() [52174.514681] BTRFS: Transaction aborted (error -2) [52174.515630] Modules linked in: btrfs dm_flakey dm_mod overlay crc32c_generic ppdev xor raid6_pq acpi_cpufreq parport_pc tpm_tis sg parport tpm evdev i2c_piix4 proc [52174.521568] CPU: 12 PID: 28024 Comm: mount Tainted: G W 4.5.0-rc6-btrfs-next-27+ #1 [52174.522805] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [52174.524053] 0000000000000000 ffff8801df2a7710 ffffffff81264e93 ffff8801df2a7758 [52174.524053] 0000000000000009 ffff8801df2a7748 ffffffff81051618 ffffffffa03591cd [52174.524053] 00000000fffffffe ffff88015e6e5000 ffff88016dbc3c88 ffff88016dbc3c88 [52174.524053] Call Trace: [52174.524053] [<ffffffff81264e93>] dump_stack+0x67/0x90 [52174.524053] [<ffffffff81051618>] warn_slowpath_common+0x99/0xb2 [52174.524053] [<ffffffffa03591cd>] ? __btrfs_unlink_inode+0x178/0x351 [btrfs] [52174.524053] [<ffffffff81051679>] warn_slowpath_fmt+0x48/0x50 [52174.524053] [<ffffffffa03591cd>] __btrfs_unlink_inode+0x178/0x351 [btrfs] [52174.524053] [<ffffffff8118f5e9>] ? iput+0xb0/0x284 [52174.524053] [<ffffffffa0359fe8>] btrfs_unlink_inode+0x1c/0x3d [btrfs] [52174.524053] [<ffffffffa038631e>] check_item_in_log+0x1fe/0x29b [btrfs] [52174.524053] [<ffffffffa0386522>] replay_dir_deletes+0x167/0x1cf [btrfs] [52174.524053] [<ffffffffa038739e>] fixup_inode_link_count+0x289/0x2aa [btrfs] [52174.524053] [<ffffffffa038748a>] fixup_inode_link_counts+0xcb/0x105 [btrfs] [52174.524053] [<ffffffffa038a5ec>] btrfs_recover_log_trees+0x258/0x32c [btrfs] [52174.524053] [<ffffffffa03885b2>] ? replay_one_extent+0x511/0x511 [btrfs] [52174.524053] [<ffffffffa034f288>] open_ctree+0x1dd4/0x21b9 [btrfs] [52174.524053] [<ffffffffa032b753>] btrfs_mount+0x97e/0xaed [btrfs] [52174.524053] [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf [52174.524053] [<ffffffff8117bafa>] mount_fs+0x67/0x131 [52174.524053] [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde [52174.524053] [<ffffffffa032af81>] btrfs_mount+0x1ac/0xaed [btrfs] [52174.524053] [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf [52174.524053] [<ffffffff8108c262>] ? lockdep_init_map+0xb9/0x1b3 [52174.524053] [<ffffffff8117bafa>] mount_fs+0x67/0x131 [52174.524053] [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde [52174.524053] [<ffffffff8119590f>] do_mount+0x8a6/0x9e8 [52174.524053] [<ffffffff811358dd>] ? strndup_user+0x3f/0x59 [52174.524053] [<ffffffff81195c65>] SyS_mount+0x77/0x9f [52174.524053] [<ffffffff814935d7>] entry_SYSCALL_64_fastpath+0x12/0x6b [52174.561288] ---[ end trace 6b53049efb1a3ea6 ]--- Fix this by forcing a transaction commit when such cases happen. This means we check in the commit root of the subvolume tree if there was any other inode with the same reference when the inode we are fsync'ing is a new inode (created in the current transaction). Test cases for fstests, covering all the scenarios given above, were submitted upstream for fstests: * fstests: generic test for fsync after renaming directory https://patchwork.kernel.org/patch/8694281/ * fstests: generic test for fsync after renaming file https://patchwork.kernel.org/patch/8694301/ * fstests: add btrfs test for fsync after snapshot deletion https://patchwork.kernel.org/patch/8670671/Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Joerg Roedel authored
commit eebb8034 upstream. IOMMU drivers that do not support default domains, but make use of the the group->domain pointer can get that pointer overwritten with NULL on device add/remove. Make sure this can't happen by only overwriting the domain pointer when it is NULL. Fixes: 1228236d ('iommu: Move default domain allocation to iommu_group_get_for_dev()') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Theodore Ts'o authored
commit c325a67c upstream. Previously, ext4 would fail the mount if the file system had the quota feature enabled and quota mount options (used for the older quota setups) were present. This broke xfstests, since xfs silently ignores the usrquote and grpquota mount options if they are specified. This commit changes things so that we are consistent with xfs; having the mount options specified is harmless, so no sense break users by forbidding them. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Theodore Ts'o authored
commit daf647d2 upstream. With the internal Quota feature, mke2fs creates empty quota inodes and quota usage tracking is enabled as soon as the file system is mounted. Since quotacheck is no longer preallocating all of the blocks in the quota inode that are likely needed to be written to, we are now seeing a lockdep false positive caused by needing to allocate a quota block from inside ext4_map_blocks(), while holding i_data_sem for a data inode. This results in this complaint: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->i_data_sem); lock(&s->s_dquot.dqio_mutex); lock(&ei->i_data_sem); lock(&s->s_dquot.dqio_mutex); Google-Bug-Id: 27907753 Signed-off-by:
-
Filipe Manana authored
commit de17e793 upstream. If the lower or upper directory of an overlayfs mount belong to a btrfs file system and we fsync the file through the overlayfs' merged directory we ended up accessing an inode that didn't belong to btrfs as if it were a btrfs inode at btrfs_sync_file() resulting in a crash like the following: [ 7782.588845] BUG: unable to handle kernel NULL pointer dereference at 0000000000000544 [ 7782.590624] IP: [<ffffffffa030b7ab>] btrfs_sync_file+0x11b/0x3e9 [btrfs] [ 7782.591931] PGD 4d954067 PUD 1e878067 PMD 0 [ 7782.592016] Oops: 0002 [#6] PREEMPT SMP DEBUG_PAGEALLOC [ 7782.592016] Modules linked in: btrfs overlay ppdev crc32c_generic evdev xor raid6_pq psmouse pcspkr sg serio_raw acpi_cpufreq parport_pc parport tpm_tis i2c_piix4 tpm i2c_core processor button loop autofs4 ext4 crc16 mbcache jbd2 sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix virtio_pci libata virtio_ring virtio scsi_mod e1000 floppy [last unloaded: btrfs] [ 7782.592016] CPU: 10 PID: 16437 Comm: xfs_io Tainted: G D 4.5.0-rc6-btrfs-next-26+ #1 [ 7782.592016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [ 7782.592016] task: ffff88001b8d40c0 ti: ffff880137488000 task.ti: ffff880137488000 [ 7782.592016] RIP: 0010:[<ffffffffa030b7ab>] [<ffffffffa030b7ab>] btrfs_sync_file+0x11b/0x3e9 [btrfs] [ 7782.592016] RSP: 0018:ffff88013748be40 EFLAGS: 00010286 [ 7782.592016] RAX: 0000000080000000 RBX: ffff880133b30c88 RCX: 0000000000000001 [ 7782.592016] RDX: 0000000000000001 RSI: ffffffff8148fec0 RDI: 00000000ffffffff [ 7782.592016] RBP: ffff88013748bec0 R08: 0000000000000001 R09: 0000000000000000 [ 7782.624248] R10: ffff88013748be40 R11: 0000000000000246 R12: 0000000000000000 [ 7782.624248] R13: 0000000000000000 R14: 00000000009305a0 R15: ffff880015e3be40 [ 7782.624248] FS: 00007fa83b9cb700(0000) GS:ffff88023ed40000(0000) knlGS:0000000000000000 [ 7782.624248] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7782.624248] CR2: 0000000000000544 CR3: 00000001fa652000 CR4: 00000000000006e0 [ 7782.624248] Stack: [ 7782.624248] ffffffff8108b5cc ffff88013748bec0 0000000000000246 ffff8800b005ded0 [ 7782.624248] ffff880133b30d60 8000000000000000 7fffffffffffffff 0000000000000246 [ 7782.624248] 0000000000000246 ffffffff81074f9b ffffffff8104357c ffff880015e3be40 [ 7782.624248] Call Trace: [ 7782.624248] [<ffffffff8108b5cc>] ? arch_local_irq_save+0x9/0xc [ 7782.624248] [<ffffffff81074f9b>] ? ___might_sleep+0xce/0x217 [ 7782.624248] [<ffffffff8104357c>] ? __do_page_fault+0x3c0/0x43a [ 7782.624248] [<ffffffff811a2351>] vfs_fsync_range+0x8c/0x9e [ 7782.624248] [<ffffffff811a237f>] vfs_fsync+0x1c/0x1e [ 7782.624248] [<ffffffff811a24d6>] do_fsync+0x31/0x4a [ 7782.624248] [<ffffffff811a2700>] SyS_fsync+0x10/0x14 [ 7782.624248] [<ffffffff81493617>] entry_SYSCALL_64_fastpath+0x12/0x6b [ 7782.624248] Code: 85 c0 0f 85 e2 02 00 00 48 8b 45 b0 31 f6 4c 29 e8 48 ff c0 48 89 45 a8 48 8d 83 d8 00 00 00 48 89 c7 48 89 45 a0 e8 fc 43 18 e1 <f0> 41 ff 84 24 44 05 00 00 48 8b 83 58 ff ff ff 48 c1 e8 07 83 [ 7782.624248] RIP [<ffffffffa030b7ab>] btrfs_sync_file+0x11b/0x3e9 [btrfs] [ 7782.624248] RSP <ffff88013748be40> [ 7782.624248] CR2: 0000000000000544 [ 7782.661994] ---[ end trace 721e14960eb939bc ]--- This started happening since commit 4bacc9c9 (overlayfs: Make f_path always point to the overlay and f_inode to the underlay) and even though after this change we could still access the btrfs inode through struct file->f_mapping->host or struct file->f_inode, we would end up resulting in more similar issues later on at check_parent_dirs_for_sync() because the dentry we got (from struct file->f_path.dentry) was from overlayfs and not from btrfs, that is, we had no way of getting the dentry that belonged to btrfs (we always got the dentry that belonged to overlayfs). The new patch from Miklos Szeredi, titled "vfs: add file_dentry()" and recently submitted to linux-fsdevel, adds a file_dentry() API that allows us to get the btrfs dentry from the input file and therefore being able to fsync when the upper and lower directories belong to btrfs filesystems. This issue has been reported several times by users in the mailing list and bugzilla. A test case for xfstests is being submitted as well. Fixes: 4bacc9c9 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101951 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109791Signed-off-by:
-
Miklos Szeredi authored
commit be62a1a8 upstream. NFS may be used as lower layer of overlayfs and accessing f_path.dentry can lead to a crash. Fix by replacing direct access of file->f_path.dentry with the file_dentry() accessor, which will always return a native object. Fixes: 4bacc9c9 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Tested-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Acked-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Miklos Szeredi authored
commit d101a125 upstream. This series fixes bugs in nfs and ext4 due to 4bacc9c9 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay"). Regular files opened on overlayfs will result in the file being opened on the underlying filesystem, while f_path points to the overlayfs mount/dentry. This confuses filesystems which get the dentry from struct file and assume it's theirs. Add a new helper, file_dentry() [*], to get the filesystem's own dentry from the file. This checks file->f_path.dentry->d_flags against DCACHE_OP_REAL, and returns file->f_path.dentry if DCACHE_OP_REAL is not set (this is the common, non-overlayfs case). In the uncommon case it will call into overlayfs's ->d_real() to get the underlying dentry, matching file_inode(file). The reason we need to check against the inode is that if the file is copied up while being open, d_real() would return the upper dentry, while the open file comes from the lower dentry. [*] If possible, it's better simply to use file_inode() instead. Signed-off-by:
-
Martin K. Petersen authored
commit f08bb1e0 upstream. During revalidate we check whether device capacity has changed before we decide whether to output disk information or not. The check for old capacity failed to take into account that we scaled sdkp->capacity based on the reported logical block size. And therefore the capacity test would always fail for devices with sectors bigger than 512 bytes and we would print several copies of the same discovery information. Avoid scaling sdkp->capacity and instead adjust the value on the fly when setting the block device capacity and generating fake C/H/S geometry. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Reported-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Ewan Milne <emilne@redhat.com> Signed-off-by:
-
Irina Tirdea authored
commit 95e7ff03 upstream. For big endian platforms, reading the axes will return invalid values. The device stores each axis value in a 16 bit little endian register. The driver uses regmap_read_bulk to get the axis value, resulting in a 16 bit little endian value. This needs to be converted to cpu endianness to work on big endian platforms. Fix endianness for big endian platforms by converting the values for the axes read from little endian to cpu. This is also partially fixed in commit 82d8e5da1a33 ("iio: accel: bmg160: optimize transfers in trigger handler"). Signed-off-by:
Irina Tirdea <irina.tirdea@intel.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Irina Tirdea authored
commit b475c59b upstream. When reading gyroscope axes using iio buffers, the values returned are always 0. In the interrupt handler, the return value of the read operation is returned to the user instead of the value read. Return the value read to the user. This is also fixed in commit 82d8e5da1a33 ("iio: accel: bmg160: optimize transfers in trigger handler"). Signed-off-by:
-
Irina Tirdea authored
commit 2215f31d upstream. For big endian platforms, reading the axes will return invalid values. The device stores each axis value in a 16 bit little endian register. The driver uses regmap_read_bulk to get the axis value, resulting in a 16 bit little endian value. This needs to be converted to cpu endianness to work on big endian platforms. Fix endianness for big endian platforms by converting the values for the axes read from little endian to cpu. This is also partially fixed in commit b6fb9b6d6552 ("iio: accel: bmc150: optimize transfers in trigger handler"). Signed-off-by:
-
