- 13 Mar, 2020 7 commits
-
-
Guchun Chen authored
RAS support capability needs to be updated on top of different memeory ECC enablement, and remove redundant memory ecc check in gmc module for vega20 and arcturus. v2: check HBM ECC enablement and set ras mask accordingly. v3: avoid to invoke atomfirmware interface to query twice. Suggested-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com>
-
Tom St Denis authored
The offset into the array was specified in bytes but should be in terms of 32-bit words. Also prevent large reads that would also cause a buffer overread. v2: Read from correct offset from internal storage buffer. Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
Stanley.Yang authored
In dcn20_funcs and dcn21_funcs struct, the member ".dsc_pg_control = NULL" should be removed due to .dsc_pg_control be assigned to dcn20_dsc_pg_control. Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Signed-off-by:
-
Stanley.Yang authored
include amdgpu_ras.h head file instead of use extern ras_debugfs_create_all function Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
-
Hawking Zhang authored
disallow the logical to be enabled on platforms that don't support gfx ras at this stage, like sriov skus, dgpu with legacy ras.etc Signed-off-by:
Monk Liu <monk.liu@amd.com> Signed-off-by:
-
John Clements authored
invoking an error injection successfully will cause an at_event intterrupt that will occur before the invoke sequence can complete causing an invalid error Reviewed-by:
John Clements <john.clements@amd.com> Signed-off-by:
-
Jack Zhang authored
refine the assignment for vcn.num_vcn_inst, vcn.harvest_config, vcn.num_enc_rings in VF Signed-off-by:
Jack Zhang <Jack.Zhang1@amd.com> Reviewed-by:
-
- 12 Mar, 2020 2 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-next-5.7-2020-03-10: amdgpu: - SR-IOV fixes - Fix up fallout from drm load/unload callback removal - Navi, renoir power management watermark fixes - Refactor smu parameter handling - Display FEC fixes - Display DCC fixes - HDCP fixes - Add support for USB-C PD firmware updates - Pollock detection fix - Rework compute ring priority handling - RAS fixes - Misc cleanups amdkfd: - Consolidate more gfx config details in amdgpu - Consolidate bo alloc flags - Improve code comments - SDMA MQD fixes - Misc cleanups gpu scheduler: - Add suport for modifying the sched list uapi: - Clarify comments about GEM_CREATE flags that are not used by userspace. The kernel driver has always prevented userspace from using these. They are only used internally in the kernel driver. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200310212748.4519-1-alexander.deucher@amd.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.7: UAPI Changes: Cross-subsystem Changes: Core Changes: Driver Changes: - fb-helper: Remove drm_fb_helper_{add,add_all,remove}_one_connector - fbdev: some cleanups and dead-code removal - Conversions to simple-encoder - zero-length array removal - Panel: panel-dpi support in panel-simple, Novatek NT35510, Elida KD35T133, Signed-off-by:
-
- 10 Mar, 2020 9 commits
-
-
Dave Airlie authored
Requested my mripard for some misc patches that need this as a base. Signed-off-by: -
Feifei Xu authored
Some framework test will fail if enable runpm on Vega10. Disable it untill issue fixed. Signed-off-by:
Feifei Xu <Feifei.Xu@amd.com> Tested-by:
Kyle Chen <Kyle.Chen@amd.com> Signed-off-by:
-
Tao Zhou authored
and remove each ras IP's own debugfs creation this is required to fix ras when the driver does not use the drm load and unload callbacks due to ordering issues with the drm device node. Signed-off-by:
-
Tao Zhou authored
centralize all debugfs creation in one place for ras this is required to fix ras when the driver does not use the drm load and unload callbacks due to ordering issues with the drm device node. Signed-off-by:
-
Prike Liang authored
There will be a coverity warning because min and max are both unsigned. Signed-off-by:
Prike Liang <Prike.Liang@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
xinhui pan authored
Only kernel bo has kfd eviction fence. This warning is to give a notice that kfd only remove eviction fence on individual bos. Tested-by:
Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Reviewed-by:
xinhui pan <xinhui.pan@amd.com> Signed-off-by:
-
Yong Zhao authored
ALLOC_MEM_FLAGS_* used are the same as the KFD_IOC_ALLOC_MEM_FLAGS_*, but they are interweavedly used in kernel driver, resulting in bad readability. For example, KFD_IOC_ALLOC_MEM_FLAGS_COHERENT is not referenced in kernel, and it functions implicitly in kernel through ALLOC_MEM_FLAGS_COHERENT, causing unnecessary confusion. Replace all occurrences of ALLOC_MEM_FLAGS_* with KFD_IOC_ALLOC_MEM_FLAGS_* to solve the problem. Signed-off-by:
Yong Zhao <Yong.Zhao@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Yong Zhao authored
People are inclined to think of the previous pr_warn message as an error, so use pre_debug instead. Signed-off-by:
-
Nirmoy Das authored
If there are no high priority compute queues available then set normal priority sched array to compute_prio_sched[AMDGPU_GFX_PIPE_PRIO_HIGH] Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
-
- 09 Mar, 2020 22 commits
-
-
Nirmoy Das authored
AMDGPU statically sets priority for compute queues at initialization so remove all the functions responsible for changing compute queue priority dynamically. Signed-off-by:
-
Nirmoy Das authored
Switch to appropriate sched list for an entity on priority override. Signed-off-by:
-
Nirmoy Das authored
Implement drm_sched_entity_modify_sched() which modifies existing sched_list with a different one. This is going to be helpful when userspace changes priority of a ctx/entity then the driver can switch to the corresponding HW scheduler list for that priority. Signed-off-by:
-
Nirmoy Das authored
We were changing compute ring priority while rings were being used before every job submission which is not recommended. This patch sets compute queue priority at mqd initialization for gfx8, gfx9 and gfx10. Policy: make queue 0 of each pipe as high priority compute queue High/normal priority compute sched lists are generated from set of high/normal priority compute queues. At context creation, entity of compute queue get a sched list from high or normal priority depending on ctx->priority Signed-off-by:
-
Xiaojie Yuan authored
Fix version for navi12. Signed-off-by:
Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by:
-
Aly-Tawfik authored
Problem Description: Currently we are checking internal fused rev id with pci rev id. However, fused internal rev id is the same on all raven2 parts (in which Dali and Pollock were based on too), thus Pollock detection fails Fix: use the pci rev to preform the detection for bandwidth calculations. Reviewed-by:
Aly-Tawfik <altawfik@amd.com> Signed-off-by:
-
Aly-Tawfik authored
Use the pci revision id rather than the asic silicon revision id. Reviewed-by:
-
Andrey Grodzovsky authored
CRTC in DPMS state off calls for low power state entry. Support both atomic mode setting and pre-atomic mode setting. v2: move comment Acked-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
-
Melissa Wen authored
The dpp2_get_optimal_number_of_taps function is never used. Removing just for code cleaning up. Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
-
Wenjing Liu authored
[why] FEC capability query should not be affected by debugging decision on whether to disable FEC. We should not determine if display supports FEC by checking debug option. Signed-off-by:
Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by:
Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by:
-
Martin Leung authored
[why] on some displays that prefer swapped polarity we were seeing L/R images swapped because OTG_STEREO_SYNC_OUTPUT_POLARITY would always be mapped to 0 [how] fix initial dal3 implementation to properly update the polarity field according to the crtc_stereo_flags (same as OTG_STEREO_EYE_FLAG_POLARITY) Signed-off-by:
Martin Leung <martin.leung@amd.com> Reviewed-by:
-
Rodrigo Siqueira authored
Raven provides retimer feature support that requires i2c interaction in order to make it work well, all settings required for this configuration are loaded from the Atom bios which include the i2c address. If the retimer feature is not available, we should abort the attempt to set this feature, otherwise, it makes the following line return I2C_CHANNEL_OPERATION_NO_RESPONSE: i2c_success = i2c_write(pipe_ctx, slave_address, buffer, sizeof(buffer)); ... if (!i2c_success) ASSERT(i2c_success); This ends up causing problems with hotplugging HDMI displays on Raven, and causes retimer settings to warn like so: WARNING: CPU: 1 PID: 429 at drivers/gpu/drm/amd/amdgpu/../dal/dc/core/dc_link.c:1998 write_i2c_retimer_setting+0xc2/0x3c0 [amdgpu] Modules linked in: edac_mce_amd ccp kvm irqbypass binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel amdgpu(+) snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi aesni_intel snd_seq amd_iommu_v2 gpu_sched aes_x86_64 crypto_simd cryptd glue_helper snd_seq_device ttm drm_kms_helper snd_timer eeepc_wmi wmi_bmof asus_wmi sparse_keymap drm mxm_wmi snd k10temp fb_sys_fops syscopyarea sysfillrect sysimgblt soundcore joydev input_leds mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 igb i2c_algo_bit hid_generic usbhid i2c_piix4 dca ahci hid libahci video wmi gpio_amdpt gpio_generic CPU: 1 PID: 429 Comm: systemd-udevd Tainted: G W 5.2.0-rc1sept162019+ #1 Hardware name: System manufacturer System Product Name/ROG STRIX B450-F GAMING, BIOS 2605 08/06/2019 RIP: 0010:write_i2c_retimer_setting+0xc2/0x3c0 [amdgpu] Code: ff 0f b6 4d ce 44 0f b6 45 cf 44 0f b6 c8 45 89 cf 44 89 e2 48 c7 c6 f0 34 bc c0 bf 04 00 00 00 e8 63 b0 90 ff 45 84 ff 75 02 <0f> 0b 42 0f b6 04 73 8d 50 f6 80 fa 02 77 8c 3c 0a 0f 85 c8 00 00 RSP: 0018:ffffa99d02726fd0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa99d02727035 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff976acc857440 RBP: ffffa99d02727018 R08: 0000000000000002 R09: 000000000002a600 R10: ffffe90610193680 R11: 00000000000005e3 R12: 000000000000005d R13: ffff976ac4b201b8 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f14f99e1680(0000) GS:ffff976acc840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdf212843b8 CR3: 0000000408906000 CR4: 00000000003406e0 Call Trace: core_link_enable_stream+0x626/0x680 [amdgpu] dce110_apply_ctx_to_hw+0x414/0x4e0 [amdgpu] dc_commit_state+0x331/0x5e0 [amdgpu] ? drm_calc_timestamping_constants+0xf9/0x150 [drm] amdgpu_dm_atomic_commit_tail+0x395/0x1e00 [amdgpu] ? dm_plane_helper_prepare_fb+0x20c/0x280 [amdgpu] commit_tail+0x42/0x70 [drm_kms_helper] drm_atomic_helper_commit+0x10c/0x120 [drm_kms_helper] amdgpu_dm_atomic_commit+0x95/0xa0 [amdgpu] drm_atomic_commit+0x4a/0x50 [drm] restore_fbdev_mode_atomic+0x1c0/0x1e0 [drm_kms_helper] restore_fbdev_mode+0x4c/0x160 [drm_kms_helper] ? _cond_resched+0x19/0x40 drm_fb_helper_restore_fbdev_mode_unlocked+0x4e/0xa0 [drm_kms_helper] drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper] fbcon_init+0x471/0x630 visual_init+0xd5/0x130 do_bind_con_driver+0x20a/0x430 do_take_over_console+0x7d/0x1b0 do_fbcon_takeover+0x5c/0xb0 fbcon_event_notify+0x6cd/0x8a0 notifier_call_chain+0x4c/0x70 blocking_notifier_call_chain+0x43/0x60 fb_notifier_call_chain+0x1b/0x20 register_framebuffer+0x254/0x360 __drm_fb_helper_initial_config_and_unlock+0x2c5/0x510 [drm_kms_helper] drm_fb_helper_initial_config+0x35/0x40 [drm_kms_helper] amdgpu_fbdev_init+0xcd/0x100 [amdgpu] amdgpu_device_init+0x1156/0x1930 [amdgpu] amdgpu_driver_load_kms+0x8d/0x2e0 [amdgpu] drm_dev_register+0x12b/0x1c0 [drm] amdgpu_pci_probe+0xd3/0x160 [amdgpu] local_pci_probe+0x47/0xa0 pci_device_probe+0x142/0x1b0 really_probe+0xf5/0x3d0 driver_probe_device+0x11b/0x130 device_driver_attach+0x58/0x60 __driver_attach+0xa3/0x140 ? device_driver_attach+0x60/0x60 ? device_driver_attach+0x60/0x60 bus_for_each_dev+0x74/0xb0 ? kmem_cache_alloc_trace+0x1a3/0x1c0 driver_attach+0x1e/0x20 bus_add_driver+0x147/0x220 ? 0xffffffffc0cb9000 driver_register+0x60/0x100 ? 0xffffffffc0cb9000 __pci_register_driver+0x5a/0x60 amdgpu_init+0x74/0x83 [amdgpu] do_one_initcall+0x4a/0x1fa ? _cond_resched+0x19/0x40 ? kmem_cache_alloc_trace+0x3f/0x1c0 ? __vunmap+0x1cc/0x200 do_init_module+0x5f/0x227 load_module+0x2330/0x2b40 __do_sys_finit_module+0xfc/0x120 ? __do_sys_finit_module+0xfc/0x120 __x64_sys_finit_module+0x1a/0x20 do_syscall_64+0x5a/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f14f9500839 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007fff9bc4f5a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000055afb5abce30 RCX: 00007f14f9500839 RDX: 0000000000000000 RSI: 000055afb5ace0f0 RDI: 0000000000000017 RBP: 000055afb5ace0f0 R08: 0000000000000000 R09: 000000000000000a R10: 0000000000000017 R11: 0000000000000246 R12: 0000000000000000 R13: 000055afb5aad800 R14: 0000000000020000 R15: 0000000000000000 ---[ end trace c286e96563966f08 ]--- This commit reworks the way that we handle i2c write for retimer in the way that we abort this configuration if the feature is not available in the device. For debug sake, we kept a simple log message in case the retimer is not available. Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Acked-by:
-
Wenjing Liu authored
[why] In HDCP Uninitialzed State, a CPIRQ event would cause log output internal policy error because the CPIRQ event is not recognized as unexpected event. [how] CPIRQ is issued in HDCP uninitialized state is unexpected. We should set unexpected event flag in event ctx. Signed-off-by:
-
Wenjing Liu authored
[why] Some RX doesn't like us to read rx id list upto max rx id list size. As discussed, we decided to read rx id list based on device count. [how] According to HDCP specs the actual size of rx id list is calculated as rx id list size = 2+3+16+5*device_count. We will read 16 bytes at a time until it reached or exceeded rx id list size. Signed-off-by:
-
Nikola Cornij authored
[why] Link or DIG BE can't be exposed to a higher stream bandwidth than they can handle. When DSC is required to fit the stream into the link bandwidth, DSC has to be programmed during timing programming to ensure this. Without it, intermittent issues such as black screen after S3 or a hot-plug can be seen. [how] Move DSC programming from enabling stream on link to timing setup. Signed-off-by:
Nikola Cornij <nikola.cornij@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
-
Yongqiang Sun authored
[Why] System isn't able to enter S0i3 due to not send display count 0 to smu. When dpms off, clk changed flag is cleared alreay, and it is checked when doing optimized bandwidth, and update clocks is bypassed due to the flag is unset. [How] Remove check flag incide the function since watermark values and clocks values are checked during update to determine whether to perform it, no need to check it again outside the function. Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by:
-
Braden Bakker authored
[What] Need debug options to control lightl/deep sleep [How] Add registry for memory power control Signed-off-by:
Braden Bakker <Braden.Bakker@amd.com> Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
-
Wenjing Liu authored
[why] It is possible even if sink signal is MST but driver enables SST stream. We should not determine if we should do MST authentication based on sink's capability. Instead we should determine whether to do MST authentication based on what we have enabled in stream. Signed-off-by:
-
Isabel Zhang authored
[Why] So the values of stay count and bstatus can be easily viewed during debugging. [How] Add stay count and bstatus values to be outputted in HDCP log Signed-off-by:
Isabel Zhang <isabel.zhang@amd.com> Reviewed-by:
-
Martin Leung authored
[why] nv14 previously inherited soc bb from generic dcn 2, did not match watermark values according to memory team [how] add nv14 specific soc bb: copy nv2 generic that it was using from before, but changed num channels to 8 Signed-off-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
-
Gurchetan Singh authored
This function can be reused for hostmem objects. v2: move virtio_gpu_is_shmem() check to virtio_gpu_cleanup_object() v3: use-after free fix Signed-off-by:
Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200305013212.130640-2-gurchetansingh@chromium.orgSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
