Make sure the settings are applied only when voltage
controlled by gpio.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add missing smc samu table setup.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add missing vddc table setup.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

By defining new Macros.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch simplifies the ASSERT*() and BREAK_TO_DEBUGGER() macros:
- Move the dependency check of CONFIG_KGDB into Kconfig
- Unify the kgdb_breakpoint() call
- Drop the non-existing CONFIG_HAVE_KGDB

Also align the behavior of ASSERT() macro in both cases with and
without CONFIG_DEBUG_KERNEL_DC.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

ASSERT_CRITICAL() invokes kgdb_breakpoint() whenever either
CONFIG_KGDB or CONFIG_HAVE_KGDB is set.  This, however, may lead to a
kernel panic when no kdb stuff is attached, since the
kgdb_breakpoint() call issues INT3.  It's nothing but a surprise for
normal end-users.

For avoiding the pitfall, make the kgdb_breakpoint() call only when
CONFIG_DEBUG_KERNEL_DC is set.

https://bugzilla.opensuse.org/show_bug.cgi?id=1177973
Cc: <stable@vger.kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Currently both error code paths handled in dal_gpio_open_ex() issues
ASSERT_CRITICAL(), and this leads to a kernel panic unnecessarily if
CONFIG_KGDB is enabled.  Since basically both are non-critical errors
and can be recovered, drop those assert calls and use a safer one,
BREAK_TO_DEBUGGER(), for allowing the debugging, instead.

BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1177973
Cc: <stable@vger.kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Bool initialisation should use 'true' and 'false' values instead of 0
and 1.

Modify amdgpu_amdkfd_gpuvm.c to initialise variable is_imported
to false instead of 0.

Issue found with Coccinelle.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The 'break' is unnecessary because of previous
'return', discard it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It looks this was accidently lost in a follow up patch.
dc context is large and we don't need contiguous pages.

Fixes: e4863f11 ("drm/amd/display: Multi display cause system lag on mode change")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Alex Xu <alex_y_xu@yahoo.ca>
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>

[Why]
For user regamma we're missing this function call
to combine user regamma + OS for GAMMA_CS_TFM_1D type.

[How]
Applied 1D LUT in the mod_color_build_user_regamma.
And Set the regamma dirty as updateGamma.
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
Some platform has a limitation of 2ms for udelay

[how]
Add 1ms udelay for specific dongle.
Signed-off-by: jinlong zhang <jinlong.zhang@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: George Shen <george.shen@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Prevent null pointer access when checking odm tree.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org>

The clock state update is the source of many problems, and capturing
this sort of information helps debug. This commit introduces tracepoints
for capturing clock values and also add traces in DCE, DCN1, DCN2x, and
DCN3.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This commit introduces a trace mechanism for struct pipe_ctx by adding a
middle layer struct in the amdgpu_dm_trace.h for capturing the most
important data from struct pipe_ctx and showing its data via tracepoint.
This tracepoint was added to dc.c and dcn10_hw_sequencer, however, it
can be added to other DCN architecture.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Debug amdgpu_dm could be a complicated task, therefore, this commit adds
tracepoints in some convenient functions such as plane and connector
check inside amdgpu_dm.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu_dc_rreg and amdgpu_dc_wreg are very similar, for this reason,
this commits abstract these two events by using DECLARE_EVENT_CLASS and
create an instance of it for each one of these events.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Our DC currently uses some of the tracepoint function inside a DC
header, which means that many other files implicitly include part of the
trace function. This situation limits how we can expand this feature for
other parts of the driver by generating multiple compilation errors when
we try to reuse some of the existing structures. This commit decouples
part of the amdgpu_dm_trace from DC core to simplify the trace
enlargement in future changes.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

| [Header Changes]
|       - Add new SCRATCH15 boot option and fw_state member to skip
|         phy access
|       - Add new SCRATCH15 boot option and fw_state member to disable
|         clk gating
|       - Add defines for AUX return status
|       - Add defines for HPD events
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

why:
oem-related ddc read/write fails without these regs

how:
copy from hw_factory_dcn20.c
Signed-off-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
It was detected in some Freesync HDR tests that displays were not
reaching their maximum nominal brightness.

[HOW]
The Multi-plane combiner (MPC) Output Gamma (OGAM) block builds a
discrete Lookup Table (LUT). When the display's maximum brightness
falls in between two values, having to be linearly interpolated by
the hardware, rounding issues might occur that will cause the
display to never reach its maximum brightness.
The fix involves doing the calculations backwards, ensuring that
the interpolation in the maximum brightness values translates to an
output of 1.0.
Signed-off-by: Felipe Clark <felclark@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
When ODM combine is in use we trigger multiple update events causing
issues with variable refresh rate.

[How]
Only trigger on a single ODM instance.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
We should leave GSL if we're not doing immediate flip no matter if
we're doing pipe split or not

[How]
Check for updating GSL state whenever we're not doing
immediate flip

v2: Squash in build fix (Alex)
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
VBIOS will not enable VSC_SDP during pre-OS to lead
MISC1[6] wasn't matched with driver.

[HOW]
disabled seamless boot if sink supports VSC_SDP
Signed-off-by: Yu-Ting Shen <Yu-ting.Shen@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
right side visual confirm is too thick due to it is 4 times of
left side (16 lines).

[How]
Change factor from 4 to 2.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Causes underflow regression

[How]
This reverts commit 99d1437aSigned-off-by: Isabel Zhang <isabel.zhang@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
For some monitors,
they can't display under BIOS with avmute enabled.

[How]
Add monitor patch for skip avmute action.
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
All DCN3x resources share ABM_MASK_SH_LIST_DCN301 definition.
The naming is misleading since it looks like DCN30 code
depends on next version DCN301, which in fact is vice-versa.

[How]
Refactor the naming to ABM_MASK_SH_LIST_DCN30.

v2: squash in build fixes (Alex)
Signed-off-by: Roman Li <roman.li@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

why:
missing OEM data to control graphics card functions

how:
load it into init_data. copied over from dcn2 implementation.
copied destruction sequence as well.
Signed-off-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY & HOW]
Currently disable 48mhz debug option only disables on boot.
Need to put option check in update_clocks as well to make it
affect more areas.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why] Can be used for debug purposes
[How] Add max target bpp override field and related handling
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

| [Header Changes]
|    - Add GPINT to change timestamping mode for traces
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
So we can track VSC SDP errors from display

[how]
Define the bit, and use it in driver logic
Signed-off-by: Reza Amini <Reza.Amini@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Underflow counter increases in AGM when performing some mode switches due
to timing sync, which is a known hardware issue.

[How]
Temporarily raise DPG height during timing sync so that underflow is not
reported.
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
If full pstate is not supported, we should set WM set A
to 0 to prevent any hangs

[How]
If pstate is not supported, set watermark set A to 0
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit c44a22b3.

Reason for revert: Patch introduces performance issues and might
cause memory consistency problems with multiple connectors.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Some sink devices wish to have access to the minimum
HBlank supported by the ASIC.

[How]
Make the ASIC minimum HBlank available in Source
Device information address 0x340.
Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>