- 15 Jul, 2020 40 commits
-
-
Jiansong Chen authored
since navy_flounder has similar gc IP version with sienna_cichlid, follow its setting for the moment. Signed-off-by:
Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by:
Tao Zhou <Tao.Zhou1@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Jiansong Chen authored
navy_flounder has the same osssys IP verison with sienna_cichlid, follow its setting. Signed-off-by:
-
Jiansong Chen authored
navy_flounder has similar gc IP version with sienna_cichlid, follow its setting for the moment. Signed-off-by:
-
Jiansong Chen authored
Signed-off-by:
-
Jiansong Chen authored
navy_flounder has the same mmhub IP version with sienna_cichlid, follow its setting. Signed-off-by:
-
Jiansong Chen authored
since navy_flounder has the same ip offset with sienna_cichlid, follow sienna_cichlid setting for the moment. Signed-off-by:
-
Jiansong Chen authored
Add soc support. Signed-off-by:
-
Jiansong Chen authored
Same as navi10. Signed-off-by:
-
Jiansong Chen authored
Same as navi10. Signed-off-by:
-
Jiansong Chen authored
Declare the gfx/compute firmwares. Signed-off-by:
-
Jiansong Chen authored
Add the asic family and IP blocks for navy flounder. Signed-off-by:
-
Jiansong Chen authored
Currently navy_flounder only supports backdoor loading type. Will switch to psp load type when psp is ready. Signed-off-by:
-
Jiansong Chen authored
Signed-off-by:
-
Jiansong Chen authored
Signed-off-by:
-
Huang Rui authored
Sienna_cichlid has four sdma instances, but other chips don't. So we need expand to add multiple trap event irq id in sdma v5.2. Signed-off-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Jack Zhang authored
1.Skip decode_ring test in VF, because VCN in SRIOV does not support direct register read/write. 2.Skip powergating configuration in hw fini because VCN3.0 SRIOV doesn't support powergating. V2: delete unneccessary white lines and refine implementation. Signed-off-by:
Jack Zhang <Jack.Zhang1@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
John Clements authored
resolve bug calculating fw start address within binary Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
John Clements <john.clements@amd.com> Signed-off-by:
-
Jack Zhang authored
1.In early_init and for sriov, hardcode harvest_config=0, enc_num=1 2.sw_init/fini alloc & free mm_table for sriov doorbell setting for sriov 3.hw_init/fini Under sriov, add start_sriov to config mmsch Skip ring_test to avoid mmio in VF, but need to initialize wptr for vcn rings. 4.Implementation for vcn_v3_0_start_sriov V2:Clean-up some uneccessary funciton declaration. Signed-off-by:
-
Jack Zhang authored
For VCN3.0 SRIOV, Guest driver needs to communicate with mmsch to set the World Switch for MM appropriately. This patch add the interface for mmsch_v3.0. Signed-off-by:
Dennis Li <Dennis.Li@amd.com> Signed-off-by:
-
Jack Zhang authored
For gfx10 boards, except for nv12, other boards take mmio write rather than rlcg write Signed-off-by:
-
Jack Zhang authored
For SIENNA_CICHLID SRIOV, jpeg and pgcp is not supported. Signed-off-by:
-
Evan Quan authored
Leftover of previous cleanups. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Evan Quan authored
Put the common code in smu_v11_0.c instead of having one copy each. Signed-off-by:
-
Evan Quan authored
This can help to maintain clear code layer. Signed-off-by:
-
Evan Quan authored
As it's needed in the succeeding thermal irq setting. Signed-off-by:
-
Evan Quan authored
These are needed for temp1/2/3 related hwmon interfaces. Signed-off-by:
-
Evan Quan authored
These are needed for temp1/2/3 related hwmon interfaces. Signed-off-by:
-
Evan Quan authored
The LCLK dpm table setup should be performed in .update_pcie_parameters(). Otherwise, the updated GenSpeed and LaneCount information will be lost. Signed-off-by:
-
Evan Quan authored
This can also help to maintain clear code layer. Signed-off-by:
-
Evan Quan authored
Leftover of previous performance level setting cleanups. Signed-off-by:
-
Evan Quan authored
By moving the implemention to renoir_ppt.c considering it's really ASIC specific. V2: fix compile warnings below drivers/gpu/drm/amd/amdgpu/../powerplay/renoir_ppt.h:40:25: warning: array subscript is above array bounds [-Warray-bounds] freq = table->FClocks[dpm_level].Freq; \ drivers/gpu/drm/amd/amdgpu/../powerplay/renoir_ppt.c:195:2: note: in expansion of macro ‘GET_DPM_CUR_FREQ’ GET_DPM_CUR_FREQ(clk_table, clk_type, dpm_level, *freq); ^~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../powerplay/renoir_ppt.h:46:25: warning: array subscript is above array bounds [-Warray-bounds] freq = table->FClocks[dpm_level].Freq; \ drivers/gpu/drm/amd/amdgpu/../powerplay/renoir_ppt.c:195:2: note: in expansion of macro ‘GET_DPM_CUR_FREQ’ GET_DPM_CUR_FREQ(clk_table, clk_type, dpm_level, *freq); Signed-off-by: -
Evan Quan authored
By calling the target APIs directly. Signed-off-by:
-
Evan Quan authored
Before and after setting gfx clock soft max/min frequency. Signed-off-by:
-
Evan Quan authored
Use the common smu_v11_0_set_soft_freq_limited_range. Signed-off-by:
-
Evan Quan authored
As a common performance level setting API is used. Then these ASIC specific APIs are not needed any more. Signed-off-by:
-
Evan Quan authored
As a common performance level setting API is used. Then these ASIC specific APIs are not needed any more. Signed-off-by:
-
Evan Quan authored
As a common performance level setting API is used. Then these ASIC specific APIs are not needed any more. Signed-off-by:
-
Evan Quan authored
So that it can be more widely shared around SMU v11 ASICs. Signed-off-by:
-
Evan Quan authored
Preparing for coming code sharing around performance level setting. Signed-off-by:
-
Evan Quan authored
This is used to cache the clock frequencies for all UMD pstates. So that we do not need to calculate from scratch on every UMD pstate switch. Signed-off-by:
-
