- 30 Nov, 2021 7 commits
-
-
Jason A. Donenfeld authored
Apparently the spinlock on incoming_handshake's skb_queue is highly contended, and a torrent of handshake or cookie packets can bring the data plane to its knees, simply by virtue of enqueueing the handshake packets to be processed asynchronously. So, we try switching this to a ring buffer to hopefully have less lock contention. This alleviates the problem somewhat, though it still isn't perfect, so future patches will have to improve this further. However, it at least doesn't completely diminish the data plane. Reported-by:
Streun Fabio <fstreun@student.ethz.ch> Reported-by:
Joel Wanner <joel.wanner@inf.ethz.ch> Fixes: e7096c13 ("net: WireGuard secure network tunnel") Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jason A. Donenfeld authored
Each peer's endpoint contains a dst_cache entry that takes a reference to another netdev. When the containing namespace exits, we take down the socket and prevent future sockets from being created (by setting creating_net to NULL), which removes that potential reference on the netns. However, it doesn't release references to the netns that a netdev cached in dst_cache might be taking, so the netns still might fail to exit. Since the socket is gimped anyway, we can simply clear all the dst_caches (by way of clearing the endpoint src), which will release all references. However, the current dst_cache_reset function only releases those references lazily. But it turns out that all of our usages of wg_socket_clear_peer_endpoint_src are called from contexts that are not exactly high-speed or bottle-necked. For example, when there's connection difficulty, or when userspace is reconfiguring the interface. And in particular for this patch, when the netns is exiting. So for those cases, it makes more sense to call dst_release immediately. For that, we add a small helper function to dst_cache. This patch also adds a test to netns.sh from Hangbin Liu to ensure this doesn't regress. Tested-by:
Hangbin Liu <liuhangbin@gmail.com> Reported-by:
Xiumei Mu <xmu@redhat.com> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Cc: Paolo Abeni <pabeni@redhat.com> Fixes: 900575aa ("wireguard: device: avoid circular netns references") Signed-off-by:
-
Li Zhijian authored
DEBUG_PI_LIST was renamed to DEBUG_PLIST since 8e18faea ("lib/plist: rename DEBUG_PI_LIST to DEBUG_PLIST"). Signed-off-by:
Li Zhijian <lizhijian@cn.fujitsu.com> Fixes: 8e18faea ("lib/plist: rename DEBUG_PI_LIST to DEBUG_PLIST") Signed-off-by:
-
Randy Dunlap authored
Rename module_init & module_exit functions that are named "mod_init" and "mod_exit" so that they are unique in both the System.map file and in initcall_debug output instead of showing up as almost anonymous "mod_init". This is helpful for debugging and in determining how long certain module_init calls take to execute. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Jason A. Donenfeld authored
We previously removed the restriction on looping to self, and then added a test to make sure the kernel didn't blow up during a routing loop. The kernel didn't blow up, thankfully, but on certain architectures where skb fragmentation is easier, such as ppc64, the skbs weren't actually being discarded after a few rounds through. But the test wasn't catching this. So actually test explicitly for massive increases in tx to see if we have a routing loop. Note that the actual loop problem will need to be addressed in a different commit. Fixes: b673e24a ("wireguard: socket: remove errant restriction on looping to self") Signed-off-by:
-
Jason A. Donenfeld authored
The selftests currently parse the kernel log at the end to track potential memory leaks. With these tests now reading off the end of the buffer, due to recent optimizations, some creation messages were lost, making the tests think that there was a free without an alloc. Fix this by increasing the kernel log size. Fixes: 24b70eee ("wireguard: use synchronize_net rather than synchronize_rcu") Signed-off-by:
-
Jason A. Donenfeld authored
A __rcu annotation got lost during refactoring, which caused sparse to become enraged. Fixes: bf7b042d ("wireguard: allowedips: free empty intermediate nodes when removing single node") Signed-off-by:
-
- 29 Nov, 2021 20 commits
-
-
msizanoen1 authored
The kernel leaks memory when a `fib` rule is present in IPv6 nftables firewall rules and a suppress_prefix rule is present in the IPv6 routing rules (used by certain tools such as wg-quick). In such scenarios, every incoming packet will leak an allocation in `ip6_dst_cache` slab cache. After some hours of `bpftrace`-ing and source code reading, I tracked down the issue to ca7a03c4 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule"). The problem with that change is that the generic `args->flags` always have `FIB_LOOKUP_NOREF` set[1][2] but the IPv6-specific flag `RT6_LOOKUP_F_DST_NOREF` might not be, leading to `fib6_rule_suppress` not decreasing the refcount when needed. How to reproduce: - Add the following nftables rule to a prerouting chain: meta nfproto ipv6 fib saddr . mark . iif oif missing drop This can be done with: sudo nft create table inet test sudo nft create chain inet test test_chain '{ type filter hook prerouting priority filter + 10; policy accept; }' sudo nft add rule inet test test_chain meta nfproto ipv6 fib saddr . mark . iif oif missing drop - Run: sudo ip -6 rule add table main suppress_prefixlength 0 - Watch `sudo slabtop -o | grep ip6_dst_cache` to see memory usage increase with every incoming ipv6 packet. This patch exposes the protocol-specific flags to the protocol specific `suppress` function, and check the protocol-specific `flags` argument for RT6_LOOKUP_F_DST_NOREF instead of the generic FIB_LOOKUP_NOREF when decreasing the refcount, like this. [1]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L71 [2]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L99 Link: https://bugzilla.kernel.org/show_bug.cgi?id=215105 Fixes: ca7a03c4 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule") Cc: stable@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sudarsana Reddy Kalluru says: ==================== net: atlantic: 11-2021 fixes The patch series contains fixes for atlantic driver to improve support of latest AQC113 chipset. Please consider applying it to 'net' tree. ==================== Signed-off-by: -
Sameer Saurabh authored
Remove the warn trace message - it's not a correct check here, because the function can still be called on the device in DOWN state Fixes: 508f2e3d ("net: atlantic: split rx and tx per-queue stats") Signed-off-by:
Sameer Saurabh <ssaurabh@marvell.com> Signed-off-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
-
Dmitry Bogdanov authored
B0 is the main and widespread device revision of atlantic2 HW. In the current state, driver will incorrectly fetch the statistics for this revision. Fixes: 5cfd54d7 ("net: atlantic: minimal A2 fw_ops") Signed-off-by:
Dmitry Bogdanov <dbezrukov@marvell.com> Signed-off-by:
-
Sameer Saurabh authored
Since Half Duplex mode has been deprecated by the firmware, driver should not advertise Half Duplex speed in ethtool support link speed values. Fixes: 071a0204 ("net: atlantic: A2: half duplex support") Signed-off-by:
-
Nikita Danilov authored
At the late production stages new dev ids were introduced. These are now in production, so its important for the driver to recognize these. And also fix the board caps for AQC115C adapter. Fixes: b3f0c79c ("net: atlantic: A2 hw_ops skeleton") Signed-off-by:
Nikita Danilov <ndanilov@aquantia.com> Signed-off-by:
-
Sameer Saurabh authored
The correct way to reflect firmware version is to use bundle version. Hence populating the same instead of MAC fw version. Fixes: c1be0bf0 ("net: atlantic: common functions needed for basic A2 init/deinit hw_ops") Signed-off-by:
-
Nikita Danilov authored
When 2.5G is advertised, N-Base should be advertised against the T-base caps. N5G is out of use in baseline code and driver should treat both 5G and N5G (and also 2.5G and N2.5G) equally from user perspective. Fixes: 5cfd54d7 ("net: atlantic: minimal A2 fw_ops") Signed-off-by:
-
Dmitry Bogdanov authored
The max waiting period (of 1 ms) while reading the data from FW shared buffer is too small for certain types of data (e.g., stats). There's a chance that FW could be updating buffer at the same time and driver would be unsuccessful in reading data. Firmware manual recommends to have 1 sec timeout to fix this issue. Fixes: 5cfd54d7 ("net: atlantic: minimal A2 fw_ops") Signed-off-by:
-
Erik Ekman authored
When link modes were initially added in commit 2c762679 ("net/mlx4_en: Use PTYS register to query ethtool settings") and later updated for the new ethtool API in commit 3d8f7cc7 ("net: mlx4: use new ETHTOOL_G/SSETTINGS API") the only 1/10G non-baseT link modes configured were 1000baseKX, 10000baseKX4 and 10000baseKR. It looks like these got picked to represent other modes since nothing better was available. Switch to using more specific link modes added in commit 5711a982 ("net: ethtool: add support for 1000BaseX and missing 10G link modes"). Tested with MCX311A-XCAT connected via DAC. Before: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseKX/Full 10000baseKR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseKX/Full 10000baseKR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes With this change: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes Tested-by:
Michael Stapelberg <michael@stapelberg.ch> Signed-off-by:
Erik Ekman <erik@kryo.se> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Jeremy Kerr authored
In our test device, we're currently freeing skbs in the transmit path with kfree(), rather than kfree_skb(). This change uses the correct kfree_skb() instead. Fixes: ded21b72 ("mctp: Add test utils") Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by:
-
Tianjia Zhang authored
When the TLS cipher suite uses CCM mode, including AES CCM and SM4 CCM, the first byte of the B0 block is flags, and the real IV starts from the second byte. The XOR operation of the IV and rec_seq should be skip this byte, that is, add the iv_offset. Fixes: f295b3ae ("net/tls: Add support of AES128-CCM based ciphers") Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Cc: Vakul Garg <vakul.garg@nxp.com> Cc: stable@vger.kernel.org # v5.2+ Signed-off-by:
-
David S. Miller authored
Benjamin Poirier says: ==================== net: mpls: Netlink notification fixes fix missing or inaccurate route notifications when devices used in nexthops are deleted. ==================== Signed-off-by: -
Benjamin Poirier authored
Following the previous commit, nh_dev can no longer be accessed and modified concurrently. Signed-off-by:
Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by:
-
Benjamin Poirier authored
There are various problems related to netlink notifications for mpls route changes in response to interfaces being deleted: * delete interface of only nexthop DELROUTE notification is missing RTA_OIF attribute * delete interface of non-last nexthop NEWROUTE notification is missing entirely * delete interface of last nexthop DELROUTE notification is missing nexthop All of these problems stem from the fact that existing routes are modified in-place before sending a notification. Restructure mpls_ifdown() to avoid changing the route in the DELROUTE cases and to create a copy in the NEWROUTE case. Fixes: f8efb73c ("mpls: multipath route support") Signed-off-by:
-
Sven Schuchmann authored
On most systems request for IRQ 0 will fail, phylib will print an error message and fall back to polling. To fix this set the phydev->irq to PHY_POLL if no IRQ is available. Fixes: cc89c323 ("lan78xx: Use irq_domain for phy interrupt from USB Int. EP") Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Sven Schuchmann <schuchmann@schleissheimer.de> Signed-off-by:
-
Ole Ernst authored
This is another branded 8153 device that doesn't work well with LPM: r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71 Disable LPM to resolve the issue. Signed-off-by:
Ole Ernst <olebowle@gmx.com> Signed-off-by:
-
Luiz Angelo Daros de Luca authored
This switch family can have up to 8 UTP ports {0..7}. However, INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK was using 2 bits instead of 3, dropping the most significant bit during indirect register reads and writes. Reading or writing ports 4, 5, 6, and 7 registers was actually manipulating, respectively, ports 0, 1, 2, and 3 registers. This is not sufficient but necessary to support any variant with more than 4 UTP ports, like RTL8367S. rtl8365mb_phy_{read,write} will now returns -EINVAL if phy is greater than 7. Fixes: 4af2950c ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC") Signed-off-by:Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by:
-
Paolo Abeni authored
Steffen reported a TCP stream corruption for HTTP requests served by the apache web-server using a cifs mount-point and memory mapping the relevant file. The root cause is quite similar to the one addressed by commit 20eb4f29 ("net: fix sk_page_frag() recursion from memory reclaim"). Here the nested access to the task page frag is caused by a page fault on the (mmapped) user-space memory buffer coming from the cifs file. The page fault handler performs an smb transaction on a different socket, inside the same process context. Since sk->sk_allaction for such socket does not prevent the usage for the task_frag, the nested allocation modify "under the hood" the page frag in use by the outer sendmsg call, corrupting the stream. The overall relevant stack trace looks like the following: httpd 78268 [001] 3461630.850950: probe:tcp_sendmsg_locked: ffffffff91461d91 tcp_sendmsg_locked+0x1 ffffffff91462b57 tcp_sendmsg+0x27 ffffffff9139814e sock_sendmsg+0x3e ffffffffc06dfe1d smb_send_kvec+0x28 [...] ffffffffc06cfaf8 cifs_readpages+0x213 ffffffff90e83c4b read_pages+0x6b ffffffff90e83f31 __do_page_cache_readahead+0x1c1 ffffffff90e79e98 filemap_fault+0x788 ffffffff90eb0458 __do_fault+0x38 ffffffff90eb5280 do_fault+0x1a0 ffffffff90eb7c84 __handle_mm_fault+0x4d4 ffffffff90eb8093 handle_mm_fault+0xc3 ffffffff90c74f6d __do_page_fault+0x1ed ffffffff90c75277 do_page_fault+0x37 ffffffff9160111e page_fault+0x1e ffffffff9109e7b5 copyin+0x25 ffffffff9109eb40 _copy_from_iter_full+0xe0 ffffffff91462370 tcp_sendmsg_locked+0x5e0 ffffffff91462370 tcp_sendmsg_locked+0x5e0 ffffffff91462b57 tcp_sendmsg+0x27 ffffffff9139815c sock_sendmsg+0x4c ffffffff913981f7 sock_write_iter+0x97 ffffffff90f2cc56 do_iter_readv_writev+0x156 ffffffff90f2dff0 do_iter_write+0x80 ffffffff90f2e1c3 vfs_writev+0xa3 ffffffff90f2e27c do_writev+0x5c ffffffff90c042bb do_syscall_64+0x5b ffffffff916000ad entry_SYSCALL_64_after_hwframe+0x65 The cifs filesystem rightfully sets sk_allocations to GFP_NOFS, we can avoid the nesting using the sk page frag for allocation lacking the __GFP_FS flag. Do not define an additional mm-helper for that, as this is strictly tied to the sk page frag usage. v1 -> v2: - use a stricted sk_page_frag() check instead of reordering the code (Eric) Reported-by:
Steffen Froemer <sfroemer@redhat.com> Fixes: 5640f768 ("net: use a per task frag allocator") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Vincent Whitchurch authored
The driver assumes that split headers can be enabled/disabled without stopping/starting the device, so it writes DMA_CHAN_CONTROL from stmmac_set_features(). However, on my system (IP v5.10a without Split Header support), simply writing DMA_CHAN_CONTROL when DMA is running (for example, with the commands below) leads to a TX watchdog timeout. host$ socat TCP-LISTEN:1024,fork,reuseaddr - & device$ ethtool -K eth0 tso off device$ ethtool -K eth0 tso on device$ dd if=/dev/zero bs=1M count=10 | socat - TCP4:host:1024 <tx watchdog timeout> Note that since my IP is configured without Split Header support, the driver always just reads and writes the same value to the DMA_CHAN_CONTROL register. I don't have access to any platforms with Split Header support so I don't know if these writes to the DMA_CHAN_CONTROL while DMA is running actually work properly on such systems. I could not find anything in the databook that says that DMA_CHAN_CONTROL should not be written when the DMA is running. But on systems without Split Header support, there is in any case no need to call enable_sph() in stmmac_set_features() at all since SPH can never be toggled, so we can avoid the watchdog timeout there by skipping this call. Fixes: 8c6fc097 ("net: stmmac: gmac4+: Add Split Header support") Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by:
-
- 26 Nov, 2021 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from netfilter. Current release - regressions: - r8169: fix incorrect mac address assignment - vlan: fix underflow for the real_dev refcnt when vlan creation fails - smc: avoid warning of possible recursive locking Current release - new code bugs: - vsock/virtio: suppress used length validation - neigh: fix crash in v6 module initialization error path Previous releases - regressions: - af_unix: fix change in behavior in read after shutdown - igb: fix netpoll exit with traffic, avoid warning - tls: fix splice_read() when starting mid-record - lan743x: fix deadlock in lan743x_phy_link_status_change() - marvell: prestera: fix bridge port operation Previous releases - always broken: - tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows - nexthop: fix refcount issues when replacing IPv6 groups - nexthop: fix null pointer dereference when IPv6 is not enabled - phylink: force link down and retrigger resolve on interface change - mptcp: fix delack timer length calculation and incorrect early clearing - ieee802154: handle iftypes as u32, prevent shift-out-of-bounds - nfc: virtual_ncidev: change default device permissions - netfilter: ctnetlink: fix error codes and flags used for kernel side filtering of dumps - netfilter: flowtable: fix IPv6 tunnel addr match - ncsi: align payload to 32-bit to fix dropped packets - iavf: fix deadlock and loss of config during VF interface reset - ice: avoid bpf_prog refcount underflow - ocelot: fix broken PTP over IP and PTP API violations Misc: - marvell: mvpp2: increase MTU limit when XDP enabled" * tag 'net-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits) net: dsa: microchip: implement multi-bridge support net: mscc: ocelot: correctly report the timestamping RX filters in ethtool net: mscc: ocelot: set up traps for PTP packets net: ptp: add a definition for the UDP port for IEEE 1588 general messages net: mscc: ocelot: create a function that replaces an existing VCAP filter net: mscc: ocelot: don't downgrade timestamping RX filters in SIOCSHWTSTAMP net: hns3: fix incorrect components info of ethtool --reset command net: hns3: fix one incorrect value of page pool info when queried by debugfs net: hns3: add check NULL address for page pool net: hns3: fix VF RSS failed problem after PF enable multi-TCs net: qed: fix the array may be out of bound net/smc: Don't call clcsock shutdown twice when smc shutdown net: vlan: fix underflow for the real_dev refcnt ptp: fix filter names in the documentation ethtool: ioctl: fix potential NULL deref in ethtool_set_coalesce() nfc: virtual_ncidev: change default device permissions net/sched: sch_ets: don't peek at classes beyond 'nbands' net: stmmac: Disable Tx queues when reconfiguring the interface selftests: tls: test for correct proto_ops tls: fix replacing proto_ops ... -
Oleksij Rempel authored
Current driver version is able to handle only one bridge at time. Configuring two bridges on two different ports would end up shorting this bridges by HW. To reproduce it: ip l a name br0 type bridge ip l a name br1 type bridge ip l s dev br0 up ip l s dev br1 up ip l s lan1 master br0 ip l s dev lan1 up ip l s lan2 master br1 ip l s dev lan2 up Ping on lan1 and get response on lan2, which should not happen. This happened, because current driver version is storing one global "Port VLAN Membership" and applying it to all ports which are members of any bridge. To solve this issue, we need to handle each port separately. This patch is dropping the global port member storage and calculating membership dynamically depending on STP state and bridge participation. Note: STP support was broken before this patch and should be fixed separately. Fixes: c2e86691 ("net: dsa: microchip: break KSZ9477 DSA driver into two files") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20211126123926.2981028-1-o.rempel@pengutronix.deSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These fix a NULL pointer dereference in the CPPC library code and a locking issue related to printing the names of ACPI device nodes in the device properties framework. Specifics: - Fix NULL pointer dereference in the CPPC library code occuring on hybrid systems without CPPC support (Rafael Wysocki). - Avoid attempts to acquire a semaphore with interrupts off when printing the names of ACPI device nodes and clean up code on top of that fix (Sakari Ailus)" * tag 'acpi-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: CPPC: Add NULL pointer check to cppc_get_perf() ACPI: Make acpi_node_get_parent() local ACPI: Get acpi_device's parent from the parent field -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These address three issues in the intel_pstate driver and fix two problems related to hibernation. Specifics: - Make intel_pstate work correctly on Ice Lake server systems with out-of-band performance control enabled (Adamos Ttofari). - Fix EPP handling in intel_pstate during CPU offline and online in the active mode (Rafael Wysocki). - Make intel_pstate support ITMT on asymmetric systems with overclocking enabled (Srinivas Pandruvada). - Fix hibernation image saving when using the user space interface based on the snapshot special device file (Evan Green). - Make the hibernation code release the snapshot block device using the same mode that was used when acquiring it (Thomas Zeitlhofer)" * tag 'pm-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: hibernate: Fix snapshot partial write lengths PM: hibernate: use correct mode for swsusp_close() cpufreq: intel_pstate: ITMT support for overclocked system cpufreq: intel_pstate: Fix active mode offline/online EPP handling cpufreq: intel_pstate: Add Ice Lake server to out-of-band IDs -
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse fix from Miklos Szeredi: "Fix a regression caused by a bugfix in the previous release. The symptom is a VM_BUG_ON triggered from splice to the fuse device. Unfortunately the original bugfix was already backported to a number of stable releases, so this fix-fix will need to be backported as well" * tag 'fuse-fixes-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: release pipe buf after last use
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Fix broken PTP over IP on Ocelot switches Changes in v2: added patch 5, added Richard's ack for the whole series sans patch 5 which is new. Po Liu reported recently that timestamping PTP over IPv4 is broken using the felix driver on NXP LS1028A. This has been known for a while, of course, since it has always been broken. The reason is because IP PTP packets are currently treated as unknown IP multicast, which is not flooded to the CPU port in the ocelot driver design, so packets don't reach the ptp4l program. The series solves the problem by installing packet traps per port when the timestamping ioctl is called, depending on the RX filter selected (L2, L4 or both). ==================== Link: https://lore.kernel.org/r/20211126172845.3149260-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
The driver doesn't support RX timestamping for non-PTP packets, but it declares that it does. Restrict the reported RX filters to PTP v2 over L2 and over L4. Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
IEEE 1588 support was declared too soon for the Ocelot switch. Out of reset, this switch does not apply any special treatment for PTP packets, i.e. when an event message is received, the natural tendency is to forward it by MAC DA/VLAN ID. This poses a problem when the ingress port is under a bridge, since user space application stacks (written primarily for endpoint ports, not switches) like ptp4l expect that PTP messages are always received on AF_PACKET / AF_INET sockets (depending on the PTP transport being used), and never being autonomously forwarded. Any forwarding, if necessary (for example in Transparent Clock mode) is handled in software by ptp4l. Having the hardware forward these packets too will cause duplicates which will confuse endpoints connected to these switches. So PTP over L2 barely works, in the sense that PTP packets reach the CPU port, but they reach it via flooding, and therefore reach lots of other unwanted destinations too. But PTP over IPv4/IPv6 does not work at all. This is because the Ocelot switch have a separate destination port mask for unknown IP multicast (which PTP over IP is) flooding compared to unknown non-IP multicast (which PTP over L2 is) flooding. Specifically, the driver allows the CPU port to be in the PGID_MC port group, but not in PGID_MCIPV4 and PGID_MCIPV6. There are several presentations from Allan Nielsen which explain that the embedded MIPS CPU on Ocelot switches is not very powerful at all, so every penny they could save by not allowing flooding to the CPU port module matters. Unknown IP multicast did not make it. The de facto consensus is that when a switch is PTP-aware and an application stack for PTP is running, switches should have some sort of trapping mechanism for PTP packets, to extract them from the hardware data path. This avoids both problems: (a) PTP packets are no longer flooded to unwanted destinations (b) PTP over IP packets are no longer denied from reaching the CPU since they arrive there via a trap and not via flooding It is not the first time when this change is attempted. Last time, the feedback from Allan Nielsen and Andrew Lunn was that the traps should not be installed by default, and that PTP-unaware switching may be desired for some use cases: https://patchwork.ozlabs.org/project/netdev/patch/20190813025214.18601-5-yangbo.lu@nxp.com/ To address that feedback, the present patch adds the necessary packet traps according to the RX filter configuration transmitted by user space through the SIOCSHWTSTAMP ioctl. Trapping is done via VCAP IS2, where we keep 5 filters, which are amended each time RX timestamping is enabled or disabled on a port: - 1 for PTP over L2 - 2 for PTP over IPv4 (UDP ports 319 and 320) - 2 for PTP over IPv6 (UDP ports 319 and 320) The cookie by which these filters (invisible to tc) are identified is strategically chosen such that it does not collide with the filters used for the ocelot-8021q tagging protocol by the Felix driver, or with the MRP traps set up by the Ocelot library. Other alternatives were considered, like patching user space to do something, but there are so many ways in which PTP packets could be made to reach the CPU, generically speaking, that "do what?" is a very valid question. The ptp4l program from the linuxptp stack already attempts to do something: it calls setsockopt(IP_ADD_MEMBERSHIP) (and PACKET_ADD_MEMBERSHIP, respectively) which translates in both cases into a dev_mc_add() on the interface, in the kernel: https://github.com/richardcochran/linuxptp/blob/v3.1.1/udp.c#L73 https://github.com/richardcochran/linuxptp/blob/v3.1.1/raw.c Reality shows that this is not sufficient in case the interface belongs to a switchdev driver, as dev_mc_add() does not show the intention to trap a packet to the CPU, but rather the intention to not drop it (it is strictly for RX filtering, same as promiscuous does not mean to send all traffic to the CPU, but to not drop traffic with unknown MAC DA). This topic is a can of worms in itself, and it would be great if user space could just stay out of it. On the other hand, setting up PTP traps privately within the driver is not new by any stretch of the imagination: https://elixir.bootlin.com/linux/v5.16-rc2/source/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c#L833 https://elixir.bootlin.com/linux/v5.16-rc2/source/drivers/net/dsa/hirschmann/hellcreek.c#L1050 https://elixir.bootlin.com/linux/v5.16-rc2/source/include/linux/dsa/sja1105.h#L21 So this is the approach taken here as well. The difference here being that we prepare and destroy the traps per port, dynamically at runtime, as opposed to driver init time, because apparently, PTP-unaware forwarding is a use case. Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support") Reported-by:Po Liu <po.liu@nxp.com> Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
As opposed to event messages (Sync, PdelayReq etc) which require timestamping, general messages (Announce, FollowUp etc) do not. In PTP they are part of different streams of data. IEEE 1588-2008 Annex D.2 "UDP port numbers" states that the UDP destination port assigned by IANA is 319 for event messages, and 320 for general messages. Yet the kernel seems to be missing the definition for general messages. This patch adds it. Signed-off-by:
-
Vladimir Oltean authored
VCAP (Versatile Content Aware Processor) is the TCAM-based engine behind tc flower offload on ocelot, among other things. The ingress port mask on which VCAP rules match is present as a bit field in the actual key of the rule. This means that it is possible for a rule to be shared among multiple source ports. When the rule is added one by one on each desired port, that the ingress port mask of the key must be edited and rewritten to hardware. But the API in ocelot_vcap.c does not allow for this. For one thing, ocelot_vcap_filter_add() and ocelot_vcap_filter_del() are not symmetric, because ocelot_vcap_filter_add() works with a preallocated and prepopulated filter and programs it to hardware, and ocelot_vcap_filter_del() does both the job of removing the specified filter from hardware, as well as kfreeing it. That is to say, the only option of editing a filter in place, which is to delete it, modify the structure and add it back, does not work because it results in use-after-free. This patch introduces ocelot_vcap_filter_replace, which trivially reprograms a VCAP entry to hardware, at the exact same index at which it existed before, without modifying any list or allocating any memory. Signed-off-by:
-
Vladimir Oltean authored
The ocelot driver, when asked to timestamp all receiving packets, 1588 v1 or NTP, says "nah, here's 1588 v2 for you". According to this discussion: https://patchwork.kernel.org/project/netdevbpf/patch/20211104133204.19757-8-martin.kaistra@linutronix.de/#24577647 drivers that downgrade from a wider request to a narrower response (or even a response where the intersection with the request is empty) are buggy, and should return -ERANGE instead. This patch fixes that. Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support") Suggested-by:
-
Jakub Kicinski authored
Guangbin Huang says: ==================== net: hns3: add some fixes for -net This series adds some fixes for the HNS3 ethernet driver. ==================== Link: https://lore.kernel.org/r/20211126120318.33921-1-huangguangbin2@huawei.comSigned-off-by:
-
Jie Wang authored
Currently, HNS3 driver doesn't clear the reset flags of components after successfully executing reset, it causes userspace info of "Components reset" and "Components not reset" is incorrect. So fix this problem by clear corresponding reset flag after reset process. Fixes: ddccc5e3 ("net: hns3: add support for triggering reset by ethtool") Signed-off-by:
Jie Wang <wangjie125@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
