- 25 Aug, 2021 1 commit
-
-
Mark Brown authored
This series of patches adds support for Mediatek AFE of MT8195 SoC. Patches are based on broonie tree "for-next" branch. Changes since v4: - removed sof related code Changes since v3: - fixed warnings found by kernel test robot - removed unused critical section - corrected the lock protected sections on etdm driver - added DPTX and HDMITX audio support Changes since v2: - added audio clock gate control - added 'mediatek' prefix to private dts properties - added consumed clocks to dt-bindins and adopted suggestions from Rob - refined clock usage and remove unused clock and control code - fixed typos Changes since v1: - fixed some problems related to dt-bindings - added some missing properties to dt-bindings - added depency declaration on dt-bindings - fixed some warnings found by kernel test robot Trevor Wu (11): ASoC: mediatek: mt8195: update mediatek common driver ASoC: mediatek: mt8195: support audsys clock control ASoC: mediatek: mt8195: support etdm in platform driver ASoC: mediatek: mt8195: support adda in platform driver ASoC: mediatek: mt8195: support pcm in platform driver ASoC: mediatek: mt8195: add platform driver dt-bindings: mediatek: mt8195: add audio afe document ASoC: mediatek: mt8195: add machine driver with mt6359, rt1019 and rt5682 ASoC: mediatek: mt8195: add DPTX audio support ASoC: mediatek: mt8195: add HDMITX audio support dt-bindings: mediatek: mt8195: add mt8195-mt6359-rt1019-rt5682 document .../bindings/sound/mt8195-afe-pcm.yaml | 184 + .../sound/mt8195-mt6359-rt1019-rt5682.yaml | 47 + sound/soc/mediatek/Kconfig | 24 + sound/soc/mediatek/Makefile | 1 + sound/soc/mediatek/common/mtk-afe-fe-dai.c | 22 +- sound/soc/mediatek/common/mtk-base-afe.h | 10 +- sound/soc/mediatek/mt8195/Makefile | 15 + sound/soc/mediatek/mt8195/mt8195-afe-clk.c | 441 +++ sound/soc/mediatek/mt8195/mt8195-afe-clk.h | 109 + sound/soc/mediatek/mt8195/mt8195-afe-common.h | 158 + sound/soc/mediatek/mt8195/mt8195-afe-pcm.c | 3281 +++++++++++++++++ sound/soc/mediatek/mt8195/mt8195-audsys-clk.c | 214 ++ sound/soc/mediatek/mt8195/mt8195-audsys-clk.h | 15 + .../soc/mediatek/mt8195/mt8195-audsys-clkid.h | 93 + sound/soc/mediatek/mt8195/mt8195-dai-adda.c | 830 +++++ sound/soc/mediatek/mt8195/mt8195-dai-etdm.c | 2639 +++++++++++++ sound/soc/mediatek/mt8195/mt8195-dai-pcm.c | 389 ++ .../mt8195/mt8195-mt6359-rt1019-rt5682.c | 1087 ++++++ sound/soc/mediatek/mt8195/mt8195-reg.h | 2796 ++++++++++++++ 19 files changed, 12350 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml create mode 100644 Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml create mode 100644 sound/soc/mediatek/mt8195/Makefile create mode 100644 sound/soc/mediatek/mt8195/mt8195-afe-clk.c create mode 100644 sound/soc/mediatek/mt8195/mt8195-afe-clk.h create mode 100644 sound/soc/mediatek/mt8195/mt8195-afe-common.h create mode 100644 sound/soc/mediatek/mt8195/mt8195-afe-pcm.c create mode 100644 sound/soc/mediatek/mt8195/mt8195-audsys-clk.c create mode 100644 sound/soc/mediatek/mt8195/mt8195-audsys-clk.h create mode 100644 sound/soc/mediatek/mt8195/mt8195-audsys-clkid.h create mode 100644 sound/soc/mediatek/mt8195/mt8195-dai-adda.c create mode 100644 sound/soc/mediatek/mt8195/mt8195-dai-etdm.c create mode 100644 sound/soc/mediatek/mt8195/mt8195-dai-pcm.c create mode 100644 sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c create mode 100644 sound/soc/mediatek/mt8195/mt8195-reg.h -- 2.18.0
-
- 24 Aug, 2021 12 commits
-
-
Changcheng Deng authored
Clean up the following includecheck warning: ./sound/soc/sof/intel/pci-tng.c: shim.h is included more than once. No functional change. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Changcheng Deng <deng.changcheng@zte.com.cn> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210824030015.57267-1-deng.changcheng@zte.com.cnSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Trevor Wu authored
This patch adds document for mt8195 board with mt6359, rt1019 and rt5682 Signed-off-by:
Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20210819084144.18483-12-trevor.wu@mediatek.comSigned-off-by:
-
Trevor Wu authored
This patch adds HDMITX audio support on mt8195-mt6359-rt1019-rt5682 board. Signed-off-by:
-
Trevor Wu authored
This patch adds DPTX audio support on mt8195-mt6359-rt1019-rt5682 board. Signed-off-by:
-
Trevor Wu authored
This patch adds support for mt8195 board with mt6359, rt1019 and rt5682. Signed-off-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210819084144.18483-9-trevor.wu@mediatek.comSigned-off-by:
-
Trevor Wu authored
This patch adds mt8195 audio afe document. In order to support dynamic clock reparenting for ADDA and ETDM, PLL and MUX clocks are requested even though they are not consumed by afe directly. Signed-off-by:
-
Trevor Wu authored
This patch adds mt8195 platform and affiliated driver. Signed-off-by:
-
Trevor Wu authored
This patch adds mt8195 pcm dai driver. Signed-off-by:
-
Trevor Wu authored
This patch adds mt8195 adda dai driver. audio_h clock is used by ADSP bus and ADDA module. When ADDA requires audio_h clock, it is switched to APLL1, otherwise it is switched to Xtal_26m so that APLL1 can be turned off when audio feature is not used. ADSP bus only requires that the clock is on, so dynamic reparenting is used for the purpose of lowering power consumption. Signed-off-by:
-
Trevor Wu authored
This patch adds mt8195 tdm/i2s dai driver. MCLK clock tree is as follows. PLL -> MUX -> DIVIDER -> MCLK For PLL source of MCLK, driver only supports APLL1 and APLL2 now. APLL3 and APLL4 are used to track external clock source, so they are only used when slave input is connected. For example, case 1: (HDMI RX connected) DL memif (a1sys) -> etdm out2 (clk from apll1/apll2) -> codec case 2: (HDMI RX disconnected) HDMI RX -> a3sys -> UL memif (a3sys) -> DL memif (a3sys) -> .... -> etdm out2 (clk from apll3) -> codec We keep all modules in the pipeline working on the same clock domain. MCLK is expected to output the clock generated from the same clock source as the pipeline, so dynamic reparenting is required for MCLK configuration. As a result, clk_set_parent() is used to select PLL source, and clk_set_rate() is used to configure divider to get MCLK output rate. Signed-off-by:
-
Trevor Wu authored
This patch adds mt8195 audio cg control. Audio clock gates are registered to CCF for reference count and clock parent management. Signed-off-by:
-
Trevor Wu authored
Update mediatek common driver to support MT8195 Signed-off-by:
-
- 23 Aug, 2021 18 commits
-
-
Mark Brown authored
Merge series "ASoC: Intel: Skylake: Fix and support complex" from Cezary Rojewski <cezary.rojewski@intel.com>: Existing skylake-driver supports very basic scenarios with limited range of modules and their control. Attached changes first fix code as several advanced configurations are 'mentioned' throughout the files but are not actually functional. Follow up are changes adding missing support for said configurations. Cezary Rojewski (5): ASoC: Intel: kbl_da7219_max98927: Fix format selection for max98373 ASoC: Intel: Skylake: Leave data as is when invoking TLV IPCs ASoC: Intel: Skylake: Fix module resource and format selection ASoC: Intel: Skylake: Fix module configuration for KPB and MIXER ASoC: Intel: Skylake: Select first entry for singular pipe config arrays Gustaw Lewandowski (2): ASoC: Intel: Skylake: Fix passing loadable flag for module ASoC: Intel: Skylake: Simplify m_state for loadable modules Kareem Shaik (1): ASoC: Intel: Skylake: Support multiple format configs Pawel Harlozinski (1): ASoC: Intel: Skylake: Properly configure modules with generic extension Piotr Maziarz (1): ASoC: Intel: Skylake: Select proper format for NHLT blob Szymon Mielczarek (1): ASoC: Intel: Skylake: Support modules with generic extension include/uapi/sound/snd_sst_tokens.h | 6 +- sound/soc/intel/boards/kbl_da7219_max98927.c | 55 +------ sound/soc/intel/skylake/skl-messages.c | 155 ++++++++++++------- sound/soc/intel/skylake/skl-pcm.c | 25 ++- sound/soc/intel/skylake/skl-topology.c | 155 +++++++++++-------- sound/soc/intel/skylake/skl-topology.h | 26 +++- 6 files changed, 231 insertions(+), 191 deletions(-) -- 2.25.1 -
Tzung-Bi Shih authored
bclk_ms is possible unused by using the given config (see [1]). sound/soc/codecs/rt1015.c:724:2: warning: Value stored to 'bclk_ms' is never read [clang-analyzer-deadcode.DeadStores] bclk_ms = frame_size > 32; ^ ~~~~~~~~~~~~~~~ In addition, bclk_ms is meaningless and confusing after applying commit a5db2ca5 ("ASoC: rt1015: remove unneeded variables in rt1015_priv"). The "> 32" in the expression looks like a typo but it was not. Let's remove the confusing variable bclk_ms. [1]: https://lkml.org/lkml/2021/8/23/305Reported-by:Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210823153323.1297723-1-tzungbi@google.comSigned-off-by:
-
Hans de Goede authored
The byt_rt5640_hp_elitepad_1000g2_jack?_check functions are only used inside bytcr_rt5640.c, mark them as static. Reported-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210823110432.64860-1-hdegoede@redhat.comSigned-off-by:
-
Krzysztof Kozlowski authored
Use common enum instead of oneOf and correct indentation warning: realtek,rt1015p.yaml:18:7: [warning] wrong indentation: expected 4 but found 6 (indentation) Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210819101020.26368-2-krzysztof.kozlowski@canonical.comSigned-off-by:
-
Angelo Dureghello authored
Add compatible for CUI Devices CMM-4030D-261-I2S-TR. Signed-off-by:
Angelo Dureghello <angelo.dureghello@timesys.com> Link: https://lore.kernel.org/r/20210821082658.4147595-3-angelo.dureghello@timesys.comSigned-off-by:
-
Angelo Dureghello authored
Add vendor prefix for CUI Devices. Signed-off-by:
-
Angelo Dureghello authored
Despite minimal datasheet differences, the driver seems perfectly compatible with CMM-4030D-261. Tested CMM-4030D-261 to work with this changes: / { cmm4030d: cmm4030d { #sound-dai-cells = <0>; compatible = "cui,cmm-4030d-261"; }; sound_mic { compatible = "simple-audio-card"; simple-audio-card,name = "i2s mem mic"; simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&sound_master>; simple-audio-card,frame-master = <&sound_master>; sound_master: simple-audio-card,cpu { sound-dai = <&ssi2>; system-clock-frequency = <2822400>; }; simple-audio-card,codec { sound-dai = <&cmm4030d>; }; }; }; Audio has been captured and tested successfully by: arecord -D "hw:1,0" -f S24_LE > test.wav aplay test.wav Signed-off-by: -
Cezary Rojewski authored
When pipe does not expose multiple configuration options, always select the first entry without searching for matching one. Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Tested-by:
Lukasz Majczak <lma@semihalf.com> Link: https://lore.kernel.org/r/20210818075742.1515155-12-cezary.rojewski@intel.comSigned-off-by:
-
Pawel Harlozinski authored
Make use of struct skl_base_cfg_ext and its format setter to configure modules which are described with said structure. Signed-off-by:
Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com> Signed-off-by:
Pawel Harlozinski <pawel.harlozinski@linux.intel.com> Signed-off-by:
Szymon Mielczarek <szymonx.mielczarek@intel.com> Signed-off-by:
-
Szymon Mielczarek authored
Some DSP modules require, besides the module base configuration, a generic extension containing audio format for all module's pins that are in use. Signed-off-by:
-
Kareem Shaik authored
A module can have two kinds of set params, as per topology requirements. For example, one pre-init and one post-init. But currently, there is support for just one type, as the format_config. This patch extends the format_configs to 4, so as to be able to support pre-init, post-init and post-bind type of set params, for the same module, simultaneously. Signed-off-by:
Kareem Shaik <kareem.m.shaik@intel.com> Signed-off-by:
-
Gustaw Lewandowski authored
States SKL_MODULE_LOADED and SKL_MODULE_UNLOADED are redundant with 'loadable' flag in struct skl_module. Additionally skl_tplg_mixer_dapm_post_pmd_event() sets m_state always to SKL_MODULE_UNINIT so next unload function isn't called for such modules. Signed-off-by:
-
Gustaw Lewandowski authored
skl_get_module_info() tries to set mconfig->module->loadable before mconfig->module has been assigned thus flag was always set to false and driver did not try to load module binaries. Signed-off-by:
-
Cezary Rojewski authored
KeyPhrasebuffer, Mixin and Mixout modules configuration is described by firmware's basic module configuration structure. There are no extended parameters required. Update functions taking part in building INIT_INSTANCE IPC payload to reflect that. Signed-off-by:
-
Cezary Rojewski authored
Module configuration may differ between its instances depending on resources required and input and output audio format. Available parameters to select from are stored in module resource and interface (format) lists. These come from topology, together with description of each of pipe's modules. Ignoring index value provided by topology and relying always on 0th entry leads to unexpected module behavior due to under/overbudged resources assigned or impropper format selection. Fix by taking entry at index specified by topology. Fixes: f6fa56e2 ("ASoC: Intel: Skylake: Parse and update module config structure") Signed-off-by:
-
Piotr Maziarz authored
Use actual pipeline format, not PCM format for blob selection. Otherwise selected blobs are not correct in pipelines with format conversion e.g.: SRC module. Signed-off-by:
Piotr Maziarz <piotrx.maziarz@linux.intel.com> Signed-off-by:
-
Cezary Rojewski authored
Advancing pointer initially fixed issue for some users but caused regression for others. Leave data as it to make it easier for end users to adjust their topology files if needed. Fixes: a8cd7066 ("ASoC: Intel: Skylake: Strip T and L from TLV IPCs") Signed-off-by:
-
Cezary Rojewski authored
Contrary to what is said in board's file, topology targeting kbl_da7219_max98373 expects format 16b, not 24/32b. Partially revert changes added in 'ASoC: Intel: Boards: Add Maxim98373 support' to bring old behavior back, aligning with topology expectations. Fixes: 716d53cc ("ASoC: Intel: Boards: Add Maxim98373 support") Signed-off-by:
-
- 20 Aug, 2021 3 commits
-
-
Mark Brown authored
Merge series "ASoC: Intel/rt5640: Add support for HP Elite Pad 1000G2 jack-detect" from Hans de Goede <hdegoede@redhat.com>: Changes in v2: - Rebase on asoc/for-next - New patch: "ASoC: Intel: bytct_rt5640: Add a separate "Headset Mic 2" DAPM pin for the mic on the 2nd jack" - Addressed Pierre-Louis' comments about calling acpi_dev_add_driver_gpios() twice Original cover-letter: The HP Elitepad 1000 G2 tablet has 2 headset jacks: 1. on the dock which uses the output of the codecs built-in HP-amp + the standard IN2 input which is always used with the headset-jack. 2. on the tablet itself, this uses the line-out of the codec + an external HP-amp, which gets enabled by the ALC5642 codec's GPIO1 pin; and IN1 for the headset-mic. The codec's GPIO1 is also its only IRQ output pin, so this means that the codec's IRQ cannot be used on this tablet. Instead the jack-detect is connected directly to GPIOs on the main SoC. The dock has a helper chip which also detects if a headset-mic is present or not, so there are 2 GPIOs for the jack-detect status of the dock. The tablet jack uses a single GPIO which indicates if a jack is present or not. Differentiating between between headphones vs a headset on the tablet jack is done by using the usual mic-bias over-current-detection mechanism. Regards, Hans Hans de Goede (6): ASoC: rt5640: Move rt5640_disable_jack_detect() up in the rt5640.c file ASoC: rt5640: Delay requesting IRQ until the machine-drv calls set_jack ASoC: rt5640: Add optional hp_det_gpio parameter to rt5640_detect_headset() ASoC: rt5640: Add rt5640_set_ovcd_params() helper ASoC: Intel: bytct_rt5640: Add a separate "Headset Mic 2" DAPM pin for the mic on the 2nd jack ASoC: Intel: bytcr_rt5640: Add support for HP Elite Pad 1000G2 jack-detect sound/soc/codecs/rt5640.c | 136 ++++++++++++---------- sound/soc/codecs/rt5640.h | 6 + sound/soc/intel/boards/bytcr_rt5640.c | 158 +++++++++++++++++++++++++- 3 files changed, 234 insertions(+), 66 deletions(-) -- 2.31.1 -
Kuninori Morimoto authored
This driver is assuming that all adg->clk[i] is not NULL. Because of this prerequisites, for_each_rsnd_clk() is possible to work for all clk without checking NULL. In other words, all adg->clk[i] should not NULL. Some SoC might doesn't have clk_a/b/c/i. devm_clk_get() returns error in such case. This driver calls rsnd_adg_null_clk_get() and use null_clk instead of NULL in such cases. But devm_clk_get() might returns NULL even though such clocks exist, but it doesn't mean error (user deliberately chose to disable the feature). NULL clk itself is not error from clk point of view, but is error from this driver point of view because it is not assuming such case. But current code is using IS_ERR() which doesn't care NULL. This driver uses IS_ERR_OR_NULL() instead of IS_ERR() for clk check. And it uses ERR_CAST() to clarify null_clk error. One concern here is that it unconditionally uses null_clk if clk_a/b/c/i was error. It is correct if it doesn't exist, but is not correct if it returns error even though it exist. It needs to check "clock-names" from DT before calling devm_clk_get() to handling such case. But let's assume it is overkill so far. Link: https://lore.kernel.org/r/YMCmhfQUimHCSH/n@mwandaReported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87v940wyf9.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Don't populate arrays on the stack but instead them static const. Makes the object code smaller by 48 bytes. Before: text data bss dec hex filename 20938 916 104 21958 55c6 ./sound/soc/sh/rcar/core.o After: text data bss dec hex filename 20890 916 104 21910 5596 ./sound/soc/sh/rcar/core.o gcc version 11.1.0) Signed-off-by:
-
- 19 Aug, 2021 6 commits
-
-
Hans de Goede authored
The HP Elitepad 1000 G2 tablet has 2 headset jacks: 1. on the dock which uses the output of the codecs built-in HP-amp + the standard IN2 input which is always used with the headset-jack. 2. on the tablet itself, this uses the line-out of the codec + an external HP-amp, which gets enabled by the ALC5642 codec's GPIO1 pin; and IN1 for the headset-mic. The codec's GPIO1 is also its only IRQ output pin, so this means that the codec's IRQ cannot be used on this tablet. Instead the jack-detect is connected directly to GPIOs on the main SoC. The dock has a helper chip which also detects if a headset-mic is present or not, so there are 2 GPIOs for the jack-detect status of the dock. The tablet jack uses a single GPIO which indicates if a jack is present or not. Differentiating between headphones vs a headset on the tablet jack is done by using the usual mic-bias over-current-detection mechanism. Add support for this unique setup, this support gets enabled on this tablet through a new BYT_RT5640_JD_HP_ELITEP_1000G2 quirk. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213415Signed-off-by:
-
Hans de Goede authored
In order to be able to do jack-detection reporting for the mic contact on the 2nd jack found on some devices, the DAPM topology needs to have a separate DAPM pin/input for that microphone, instead of re-using the "Internal Mic" pin which is normally used together with the IN1P input of the codec. Using the "Internal Mic" dapm-pin-switch for this in a snd_soc_jack_pin to report hotplug events causes the "Internal Mic" pin to get deactivated when unplugging a headset from the 2nd jack, thus turning off the actual Internal Mic (typically a pair of digital mics on devices with 2 jacks). Fixes: 79c1123b ("ASoC: Intel: bytcr_rt5640: Add support for a second headset mic input") Signed-off-by:
-
Hans de Goede authored
Some devices don't use the builtin jack-detect but can still benefit from the mic-bias-current over-current-detection to differentiate between headphones vs a headset. Move the ovcd init code from rt5640_enable_jack_detect() into a new rt5640_set_ovcd_params() helper and export this helper as well as a couple of related ovcd functions. Signed-off-by:
-
Hans de Goede authored
Some devices don't use the builtin jack-detect but can still benefit from the mic-bias-current over-current-detection headphones vs headset detection done by rt5640_detect_headset(). In this case the jack-inserted check done by rt5640_detect_headset() needs to be done through a GPIO rather then by using the codec's builtin jack-detect. Add an optional hp_det_gpio parameter and export rt5640_detect_headset() for use on machines where jack-detect is handled outside of the codec. Signed-off-by:
-
Hans de Goede authored
Delay requesting the IRQ until the machine-drv calls set_jack. The main reason for this is that the codec's IRQ is unused on some boards, in which case we really should not call request_irq at all. On some boards there is an IRQ listed at index 0 for the codec, but this is not connected to the codec, but rather is directly connected to the jack's jack-detect pin. These special setups will be handled by the machine-driver, but the machine driver can only request the IRQ if it is not first requested by the codec driver. Moving the request_irq to the set_jack callback (which will not get called in this case) avoids the codec-driver clobbering the IRQ. Moving the request_irq also removes the need to disable the IRQ immediately after requesting it, avoiding a small race (this could also have been fixed by using the new IRQF_NO_AUTOEN flag when requesting the IRQ). Signed-off-by:
-
Hans de Goede authored
Move rt5640_disable_jack_detect() to above rt5640_enable_jack_detect(). This is a preparation patch for reworking how the IRQ gets requested. Signed-off-by:
-
