- 10 Jul, 2019 5 commits
-
-
Mike Marciniszyn authored
commit 3230f4a8 upstream. The following warning can happen when a memory shortage occurs during txreq allocation: [10220.939246] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC) [10220.939246] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016 [10220.939247] cache: mnt_cache, object size: 384, buffer size: 384, default order: 2, min order: 0 [10220.939260] Workqueue: hfi0_0 _hfi1_do_send [hfi1] [10220.939261] node 0: slabs: 1026568, objs: 43115856, free: 0 [10220.939262] Call Trace: [10220.939262] node 1: slabs: 820872, objs: 34476624, free: 0 [10220.939263] dump_stack+0x5a/0x73 [10220.939265] warn_alloc+0x103/0x190 [10220.939267] ? wake_all_kswapds+0x54/0x8b [10220.939268] __alloc_pages_slowpath+0x86c/0xa2e [10220.939270] ? __alloc_pages_nodemask+0x2fe/0x320 [10220.939271] __alloc_pages_nodemask+0x2fe/0x320 [10220.939273] new_slab+0x475/0x550 [10220.939275] ___slab_alloc+0x36c/0x520 [10220.939287] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939299] ? __get_txreq+0x54/0x160 [hfi1] [10220.939310] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939312] __slab_alloc+0x40/0x61 [10220.939323] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939325] kmem_cache_alloc+0x181/0x1b0 [10220.939336] hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939348] ? hfi1_verbs_send_dma+0x386/0xa10 [hfi1] [10220.939359] ? find_prev_entry+0xb0/0xb0 [hfi1] [10220.939371] hfi1_do_send+0x1d9/0x3f0 [hfi1] [10220.939372] process_one_work+0x171/0x380 [10220.939374] worker_thread+0x49/0x3f0 [10220.939375] kthread+0xf8/0x130 [10220.939377] ? max_active_store+0x80/0x80 [10220.939378] ? kthread_bind+0x10/0x10 [10220.939379] ret_from_fork+0x35/0x40 [10220.939381] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC) The shortage is handled properly so the message isn't needed. Silence by adding the no warn option to the slab allocation. Fixes: 45842abb ("staging/rdma/hfi1: move txreq header code") Cc: <stable@vger.kernel.org> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
commit c19dffc0 upstream. An endpoint conflict occurs when the USB is working in device mode during an isochronous communication. When the endpointA IN direction is an isochronous IN endpoint, and the host sends an IN token to endpointA on another device, then the OUT transaction may be missed regardless the OUT endpoint number. Generally, this occurs when the device is connected to the host through a hub and other devices are connected to the same hub. The affected OUT endpoint can be either control, bulk, isochronous, or an interrupt endpoint. After the OUT endpoint is primed, if an IN token to the same endpoint number on another device is received, then the OUT endpoint may be unprimed (cannot be detected by software), which causes this endpoint to no longer respond to the host OUT token, and thus, no corresponding interrupt occurs. There is no good workaround for this issue, the only thing the software could do is numbering isochronous IN from the highest endpoint since we have observed most of device number endpoint from the lowest. Cc: <stable@vger.kernel.org> #v3.14+ Cc: Fabio Estevam <festevam@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Jun Li <jun.li@nxp.com> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Stanley Chu authored
commit 24e2e7a1 upstream. UFS runtime suspend can be triggered after pm_runtime_enable() is invoked in ufshcd_pltfrm_init(). However if the first runtime suspend is triggered before binding ufs_hba structure to ufs device structure via platform_set_drvdata(), then UFS runtime suspend will be no longer triggered in the future because its dev->power.runtime_error was set in the first triggering and does not have any chance to be cleared. To be more clear, dev->power.runtime_error is set if hba is NULL in ufshcd_runtime_suspend() which returns -EINVAL to rpm_callback() where dev->power.runtime_error is set as -EINVAL. In this case, any future rpm_suspend() for UFS device fails because rpm_check_suspend_allowed() fails due to non-zero dev->power.runtime_error. To resolve this issue, make sure the first UFS runtime suspend get valid "hba" in ufshcd_runtime_suspend(): Enable UFS runtime PM only after hba is successfully bound to UFS device structure. Fixes: 62694735 ([SCSI] ufs: Add runtime PM support for UFS host controller driver) Cc: stable@vger.kernel.org Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Linus Torvalds authored
commit 6f303d60 upstream. We already did this for clang, but now gcc has that warning too. Yes, yes, the address may be unaligned. And that's kind of the point. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Miguel Ojeda authored
commit 0c97bf86 upstream. Starting with GCC 9, -Warray-bounds detects cases when memset is called starting on a member of a struct but the size to be cleared ends up writing over further members. Such a call happens in the trace code to clear, at once, all members after and including `seq` on struct trace_iterator: In function 'memset', inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3: ./include/linux/string.h:344:9: warning: '__builtin_memset' offset [8505, 8560] from the object at 'iter' is out of the bounds of referenced subobject 'seq' with type 'struct trace_seq' at offset 4368 [-Warray-bounds] 344 | return __builtin_memset(p, c, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ In order to avoid GCC complaining about it, we compute the address ourselves by adding the offsetof distance instead of referring directly to the member. Since there are two places doing this clear (trace.c and trace_kdb.c), take the chance to move the workaround into a single place in the internal header. Link: http://lkml.kernel.org/r/20190523124535.GA12931@gmail.comSigned-off-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [ Removed unnecessary parenthesis around "iter" ] Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
- 27 Jun, 2019 2 commits
-
-
Greg Kroah-Hartman authored
-
Eric Dumazet authored
commit b6653b36 upstream. tcp_fragment() might be called for skbs in the write queue. Memory limits might have been exceeded because tcp_sendmsg() only checks limits at full skb (64KB) boundaries. Therefore, we need to make sure tcp_fragment() wont punish applications that might have setup very low SO_SNDBUF values. Fixes: f070ef2a ("tcp: tcp_fragment() should apply sane memory limits") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Christoph Paasch <cpaasch@apple.com> Tested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
- 22 Jun, 2019 33 commits
-
-
Greg Kroah-Hartman authored
-
Alexander Lochmann authored
commit f69e749a upstream. file_remove_privs() might be called for non-regular files, e.g. blkdev inode. There is no reason to do its job on things like blkdev inodes, pipes, or cdevs. Hence, abort if file does not refer to a regular inode. AV: more to the point, for devices there might be any number of inodes refering to given device. Which one to strip the permissions from, even if that made any sense in the first place? All of them will be observed with contents modified, after all. Found by LockDoc (Alexander Lochmann, Horst Schirmeier and Olaf Spinczyk) Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Alexander Lochmann <alexander.lochmann@tu-dortmund.de> Signed-off-by:
Horst Schirmeier <horst.schirmeier@tu-dortmund.de> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Amit Cohen authored
[ Upstream commit 275e928f ] Force of 56G is not supported by hardware in Ethernet devices. This configuration fails with a bad parameter error from firmware. Add check of this case. Instead of trying to set 56G with autoneg off, return a meaningful error. Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by:
Amit Cohen <amitc@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jason Yan authored
[ Upstream commit 3b054179 ] The sas_port(phy->port) allocated in sas_ex_discover_expander() will not be deleted when the expander failed to discover. This will cause resource leak and a further issue of kernel BUG like below: [159785.843156] port-2:17:29: trying to add phy phy-2:17:29 fails: it's already part of another port [159785.852144] ------------[ cut here ]------------ [159785.856833] kernel BUG at drivers/scsi/scsi_transport_sas.c:1086! [159785.863000] Internal error: Oops - BUG: 0 [#1] SMP [159785.867866] CPU: 39 PID: 16993 Comm: kworker/u96:2 Tainted: G W OE 4.19.25-vhulk1901.1.0.h111.aarch64 #1 [159785.878458] Hardware name: Huawei Technologies Co., Ltd. Hi1620EVBCS/Hi1620EVBCS, BIOS Hi1620 CS B070 1P TA 03/21/2019 [159785.889231] Workqueue: 0000:74:02.0_disco_q sas_discover_domain [159785.895224] pstate: 40c00009 (nZcv daif +PAN +UAO) [159785.900094] pc : sas_port_add_phy+0x188/0x1b8 [159785.904524] lr : sas_port_add_phy+0x188/0x1b8 [159785.908952] sp : ffff0001120e3b80 [159785.912341] x29: ffff0001120e3b80 x28: 0000000000000000 [159785.917727] x27: ffff802ade8f5400 x26: ffff0000681b7560 [159785.923111] x25: ffff802adf11a800 x24: ffff0000680e8000 [159785.928496] x23: ffff802ade8f5728 x22: ffff802ade8f5708 [159785.933880] x21: ffff802adea2db40 x20: ffff802ade8f5400 [159785.939264] x19: ffff802adea2d800 x18: 0000000000000010 [159785.944649] x17: 00000000821bf734 x16: ffff00006714faa0 [159785.950033] x15: ffff0000e8ab4ecf x14: 7261702079646165 [159785.955417] x13: 726c612073277469 x12: ffff00006887b830 [159785.960802] x11: ffff00006773eaa0 x10: 7968702079687020 [159785.966186] x9 : 0000000000002453 x8 : 726f702072656874 [159785.971570] x7 : 6f6e6120666f2074 x6 : ffff802bcfb21290 [159785.976955] x5 : ffff802bcfb21290 x4 : 0000000000000000 [159785.982339] x3 : ffff802bcfb298c8 x2 : 337752b234c2ab00 [159785.987723] x1 : 337752b234c2ab00 x0 : 0000000000000000 [159785.993108] Process kworker/u96:2 (pid: 16993, stack limit = 0x0000000072dae094) [159786.000576] Call trace: [159786.003097] sas_port_add_phy+0x188/0x1b8 [159786.007179] sas_ex_get_linkrate.isra.5+0x134/0x140 [159786.012130] sas_ex_discover_expander+0x128/0x408 [159786.016906] sas_ex_discover_dev+0x218/0x4c8 [159786.021249] sas_ex_discover_devices+0x9c/0x1a8 [159786.025852] sas_discover_root_expander+0x134/0x160 [159786.030802] sas_discover_domain+0x1b8/0x1e8 [159786.035148] process_one_work+0x1b4/0x3f8 [159786.039230] worker_thread+0x54/0x470 [159786.042967] kthread+0x134/0x138 [159786.046269] ret_from_fork+0x10/0x18 [159786.049918] Code: 91322300 f0004402 91178042 97fe4c9b (d4210000) [159786.056083] Modules linked in: hns3_enet_ut(OE) hclge(OE) hnae3(OE) hisi_sas_test_hw(OE) hisi_sas_test_main(OE) serdes(OE) [159786.067202] ---[ end trace 03622b9e2d99e196 ]--- [159786.071893] Kernel panic - not syncing: Fatal exception [159786.077190] SMP: stopping secondary CPUs [159786.081192] Kernel Offset: disabled [159786.084753] CPU features: 0x2,a2a00a38 Fixes: 2908d778 ("[SCSI] aic94xx: new driver") Reported-by:
Jian Luo <luojian5@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> Signed-off-by:
-
Lianbo Jiang authored
[ Upstream commit 1d94f06e ] When SME is enabled, the smartpqi driver won't work on the HP DL385 G10 machine, which causes the failure of kernel boot because it fails to allocate pqi error buffer. Please refer to the kernel log: .... [ 9.431749] usbcore: registered new interface driver uas [ 9.441524] Microsemi PQI Driver (v1.1.4-130) [ 9.442956] i40e 0000:04:00.0: fw 6.70.48768 api 1.7 nvm 10.2.5 [ 9.447237] smartpqi 0000:23:00.0: Microsemi Smart Family Controller found Starting dracut initqueue hook... [ OK ] Started Show Plymouth Boot Scre[ 9.471654] Broadcom NetXtreme-C/E driver bnxt_en v1.9.1 en. [ OK ] Started Forward Password Requests to Plymouth Directory Watch. [[0;[ 9.487108] smartpqi 0000:23:00.0: failed to allocate PQI error buffer .... [ 139.050544] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts [ 139.589779] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts Basically, the fact that the coherent DMA mask value wasn't set caused the driver to fall back to SWIOTLB when SME is active. For correct operation, lets call the dma_set_mask_and_coherent() to properly set the mask for both streaming and coherent, in order to inform the kernel about the devices DMA addressing capabilities. Signed-off-by:
Lianbo Jiang <lijiang@redhat.com> Acked-by:
Don Brace <don.brace@microsemi.com> Tested-by:
-
Varun Prakash authored
[ Upstream commit cc555759 ] ip_dev_find() can return NULL so add a check for NULL pointer. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Yoshihiro Shimoda authored
[ Upstream commit 315ca92d ] The sh_eth_close() resets the MAC and then calls phy_stop() so that mdio read access result is incorrect without any error according to kernel trace like below: ifconfig-216 [003] .n.. 109.133124: mdio_access: ee700000.ethernet-ffffffff read phy:0x01 reg:0x00 val:0xffff According to the hardware manual, the RMII mode should be set to 1 before operation the Ethernet MAC. However, the previous code was not set to 1 after the driver issued the soft_reset in sh_eth_dev_exit() so that the mdio read access result seemed incorrect. To fix the issue, this patch adds a condition and set the RMII mode register in sh_eth_dev_exit() for R-Car Gen2 and RZ/A1 SoCs. Note that when I have tried to move the sh_eth_dev_exit() calling after phy_stop() on sh_eth_close(), but it gets worse (kernel panic happened and it seems that a register is accessed while the clock is off). Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Paul Mackerras authored
[ Upstream commit 5a3f4936 ] Currently the HV KVM code takes the kvm->lock around calls to kvm_for_each_vcpu() and kvm_get_vcpu_by_id() (which can call kvm_for_each_vcpu() internally). However, that leads to a lock order inversion problem, because these are called in contexts where the vcpu mutex is held, but the vcpu mutexes nest within kvm->lock according to Documentation/virtual/kvm/locking.txt. Hence there is a possibility of deadlock. To fix this, we simply don't take the kvm->lock mutex around these calls. This is safe because the implementations of kvm_for_each_vcpu() and kvm_get_vcpu_by_id() have been designed to be able to be called locklessly. Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Reviewed-by:
Cédric Le Goater <clg@kaod.org> Signed-off-by:
-
Paul Mackerras authored
[ Upstream commit 1659e27d ] Currently the Book 3S KVM code uses kvm->lock to synchronize access to the kvm->arch.rtas_tokens list. Because this list is scanned inside kvmppc_rtas_hcall(), which is called with the vcpu mutex held, taking kvm->lock cause a lock inversion problem, which could lead to a deadlock. To fix this, we add a new mutex, kvm->arch.rtas_token_lock, which nests inside the vcpu mutexes, and use that instead of kvm->lock when accessing the rtas token list. This removes the lockdep_assert_held() in kvmppc_rtas_tokens_free(). At this point we don't hold the new mutex, but that is OK because kvmppc_rtas_tokens_free() is only called when the whole VM is being destroyed, and at that point nothing can be looking up a token in the list. Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit 9a626c4a ] Fix build errors on ia64 when DISCONTIGMEM=y and NUMA=y by exporting paddr_to_nid(). Fixes these build errors: ERROR: "paddr_to_nid" [sound/core/snd-pcm.ko] undefined! ERROR: "paddr_to_nid" [net/sunrpc/sunrpc.ko] undefined! ERROR: "paddr_to_nid" [fs/cifs/cifs.ko] undefined! ERROR: "paddr_to_nid" [drivers/video/fbdev/core/fb.ko] undefined! ERROR: "paddr_to_nid" [drivers/usb/mon/usbmon.ko] undefined! ERROR: "paddr_to_nid" [drivers/usb/core/usbcore.ko] undefined! ERROR: "paddr_to_nid" [drivers/md/raid1.ko] undefined! ERROR: "paddr_to_nid" [drivers/md/dm-mod.ko] undefined! ERROR: "paddr_to_nid" [drivers/md/dm-crypt.ko] undefined! ERROR: "paddr_to_nid" [drivers/md/dm-bufio.ko] undefined! ERROR: "paddr_to_nid" [drivers/ide/ide-core.ko] undefined! ERROR: "paddr_to_nid" [drivers/ide/ide-cd_mod.ko] undefined! ERROR: "paddr_to_nid" [drivers/gpu/drm/drm.ko] undefined! ERROR: "paddr_to_nid" [drivers/char/agp/agpgart.ko] undefined! ERROR: "paddr_to_nid" [drivers/block/nbd.ko] undefined! ERROR: "paddr_to_nid" [drivers/block/loop.ko] undefined! ERROR: "paddr_to_nid" [drivers/block/brd.ko] undefined! ERROR: "paddr_to_nid" [crypto/ccm.ko] undefined! Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: linux-ia64@vger.kernel.org Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Thomas Richter authored
[ Upstream commit 6738028d ] Command 'perf record' and 'perf report' on a system without kernel debuginfo packages uses /proc/kallsyms and /proc/modules to find addresses for kernel and module symbols. On x86 this works for root and non-root users. On s390, when invoked as non-root user, many of the following warnings are shown and module symbols are missing: proc/{kallsyms,modules} inconsistency while looking for "[sha1_s390]" module! Command 'perf record' creates a list of module start addresses by parsing the output of /proc/modules and creates a PERF_RECORD_MMAP record for the kernel and each module. The following function call sequence is executed: machine__create_kernel_maps machine__create_module modules__parse machine__create_module --> for each line in /proc/modules arch__fix_module_text_start Function arch__fix_module_text_start() is s390 specific. It opens file /sys/module/<name>/sections/.text to extract the module's .text section start address. On s390 the module loader prepends a header before the first section, whereas on x86 the module's text section address is identical the the module's load address. However module section files are root readable only. For non-root the read operation fails and machine__create_module() returns an error. Command perf record does not generate any PERF_RECORD_MMAP record for loaded modules. Later command perf report complains about missing module maps. To fix this function arch__fix_module_text_start() always returns success. For root users there is no change, for non-root users the module's load address is used as module's text start address (the prepended header then counts as part of the text section). This enable non-root users to use module symbols and avoid the warning when perf report is executed. Output before: [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP 0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text Output after: [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP 0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text 0 0x1b8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../autofs4.ko.xz 0 0x250 [0xa8]: PERF_RECORD_MMAP ... x /lib/modules/.../sha_common.ko.xz 0 0x2f8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../des_generic.ko.xz Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Link: http://lkml.kernel.org/r/20190522144601.50763-4-tmricht@linux.ibm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Shawn Landden authored
[ Upstream commit 97acec7d ] This strncat() is safe because the buffer was allocated with zalloc(), however gcc doesn't know that. Since the string always has 4 non-null bytes, just use memcpy() here. CC /home/shawn/linux/tools/perf/util/data-convert-bt.o In file included from /usr/include/string.h:494, from /home/shawn/linux/tools/lib/traceevent/event-parse.h:27, from util/data-convert-bt.c:22: In function ‘strncat’, inlined from ‘string_set_value’ at util/data-convert-bt.c:274:4: /usr/include/powerpc64le-linux-gnu/bits/string_fortified.h:136:10: error: ‘__builtin_strncat’ output may be truncated copying 4 bytes from a string of length 4 [-Werror=stringop-truncation] 136 | return __builtin___strncat_chk (__dest, __src, __len, __bos (__dest)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by:
Shawn Landden <shawn@git.icu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20190518183238.10954-1-shawn@git.icu Link: https://lkml.kernel.org/n/tip-289f1jice17ta7tr3tstm9jm@git.kernel.orgSigned-off-by:
-
Sahitya Tummala authored
[ Upstream commit f6122ed2 ] In the vfs_statx() context, during path lookup, the dentry gets added to sd->s_dentry via configfs_attach_attr(). In the end, vfs_statx() kills the dentry by calling path_put(), which invokes configfs_d_iput(). Ideally, this dentry must be removed from sd->s_dentry but it doesn't if the sd->s_count >= 3. As a result, sd->s_dentry is holding reference to a stale dentry pointer whose memory is already freed up. This results in use-after-free issue, when this stale sd->s_dentry is accessed later in configfs_readdir() path. This issue can be easily reproduced, by running the LTP test case - sh fs_racer_file_list.sh /config (https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/fs/racer/fs_racer_file_list.sh) Fixes: 76ae281f ('configfs: fix race between dentry put and lookup') Signed-off-by:
Sahitya Tummala <stummala@codeaurora.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Yingjoe Chen authored
[ Upstream commit a0692f0e ] If I2C_M_RECV_LEN check failed, msgs[i].buf allocated by memdup_user will not be freed. Pump index up so it will be freed. Fixes: 838bfa60 ("i2c-dev: Add support for I2C_M_RECV_LEN") Signed-off-by:
Yingjoe Chen <yingjoe.chen@mediatek.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Kees Cook authored
[ Upstream commit 3e66b7cc ] Building with Clang reports the redundant use of MODULE_DEVICE_TABLE(): drivers/net/ethernet/dec/tulip/de4x5.c:2110:1: error: redefinition of '__mod_eisa__de4x5_eisa_ids_device_table' MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids); ^ ./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE' extern typeof(name) __mod_##type##__##name##_device_table \ ^ <scratch space>:90:1: note: expanded from here __mod_eisa__de4x5_eisa_ids_device_table ^ drivers/net/ethernet/dec/tulip/de4x5.c:2100:1: note: previous definition is here MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids); ^ ./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE' extern typeof(name) __mod_##type##__##name##_device_table \ ^ <scratch space>:85:1: note: expanded from here __mod_eisa__de4x5_eisa_ids_device_table ^ This drops the one further from the table definition to match the common use of MODULE_DEVICE_TABLE(). Fixes: 07563c71 ("EISA bus MODALIAS attributes support") Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit e9646f0f ] The gpio-adp5588 driver uses interfaces that are provided by GPIOLIB_IRQCHIP, so select that symbol in its Kconfig entry. Fixes these build errors: ../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_handler’: ../drivers/gpio/gpio-adp5588.c:266:26: error: ‘struct gpio_chip’ has no member named ‘irq’ dev->gpio_chip.irq.domain, gpio)); ^ ../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_setup’: ../drivers/gpio/gpio-adp5588.c:298:2: error: implicit declaration of function ‘gpiochip_irqchip_add_nested’ [-Werror=implicit-function-declaration] ret = gpiochip_irqchip_add_nested(&dev->gpio_chip, ^ ../drivers/gpio/gpio-adp5588.c:307:2: error: implicit declaration of function ‘gpiochip_set_nested_irqchip’ [-Werror=implicit-function-declaration] gpiochip_set_nested_irqchip(&dev->gpio_chip, ^ Fixes: 459773ae ("gpio: adp5588-gpio: support interrupt controller") Reported-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit 3f9fbe9b ] Similar to how decrementing rb->next too early can cause data_head to (temporarily) be observed to go backward, so too can this happen when we increment too late. This barrier() ensures the rb->head load happens after the increment, both the one in the 'goto again' path, as the one from perf_output_get_handle() -- albeit very unlikely to matter for the latter. Suggested-by:
Yabin Cui <yabinc@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Cc: mark.rutland@arm.com Cc: namhyung@kernel.org Fixes: ef60777c ("perf: Optimize the perf_output() path by removing IRQ-disables") Link: http://lkml.kernel.org/r/20190517115418.309516009@infradead.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Yabin Cui authored
[ Upstream commit 1b038c6e ] In perf_output_put_handle(), an IRQ/NMI can happen in below location and write records to the same ring buffer: ... local_dec_and_test(&rb->nest) ... <-- an IRQ/NMI can happen here rb->user_page->data_head = head; ... In this case, a value A is written to data_head in the IRQ, then a value B is written to data_head after the IRQ. And A > B. As a result, data_head is temporarily decreased from A to B. And a reader may see data_head < data_tail if it read the buffer frequently enough, which creates unexpected behaviors. This can be fixed by moving dec(&rb->nest) to after updating data_head, which prevents the IRQ/NMI above from updating data_head. [ Split up by peterz. ] Signed-off-by:
-
Frank van der Linden authored
[ Upstream commit 2ac44ab6 ] For F17h AMD CPUs, the CPB capability ('Core Performance Boost') is forcibly set, because some versions of that chip incorrectly report that they do not have it. However, a hypervisor may filter out the CPB capability, for good reasons. For example, KVM currently does not emulate setting the CPB bit in MSR_K7_HWCR, and unchecked MSR access errors will be thrown when trying to set it as a guest: unchecked MSR access error: WRMSR to 0xc0010015 (tried to write 0x0000000001000011) at rIP: 0xffffffff890638f4 (native_write_msr+0x4/0x20) Call Trace: boost_set_msr+0x50/0x80 [acpi_cpufreq] cpuhp_invoke_callback+0x86/0x560 sort_range+0x20/0x20 cpuhp_thread_fun+0xb0/0x110 smpboot_thread_fn+0xef/0x160 kthread+0x113/0x130 kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x35/0x40 To avoid this issue, don't forcibly set the CPB capability for a CPU when running under a hypervisor. Signed-off-by:
Frank van der Linden <fllinden@amazon.com> Acked-by:
Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: jiaxun.yang@flygoat.com Fixes: 02371991 ("x86/CPU/AMD: Set the CPB bit unconditionally on F17h") Link: http://lkml.kernel.org/r/20190522221745.GA15789@dev-dsk-fllinden-2c-c1893d73.us-west-2.amazon.com [ Minor edits to the changelog. ] Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit ccfb62f2 ] The user can change the device_name with the IMSETDEVNAME ioctl, but we need to ensure that the user's name is NUL terminated. Otherwise it could result in a buffer overflow when we copy the name back to the user with IMGETDEVINFO ioctl. I also changed two strcpy() calls which handle the name to strscpy(). Hopefully, there aren't any other ways to create a too long name, but it's nice to do this as a kernel hardening measure. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jeffrin Jose T authored
[ Upstream commit 82ce6eb1 ] A test for the basic NAT functionality uses ip command which needs veth device. There is a condition where the kernel support for veth is not compiled into the kernel and the test script breaks. This patch contains code for reasonable error display and correct code exit. Signed-off-by:
Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Stephane Eranian authored
[ Upstream commit 23e3983a ] This patch fixes an bug revealed by the following commit: 6b89d4c1 ("perf/x86/intel: Fix INTEL_FLAGS_EVENT_CONSTRAINT* masking") That patch modified INTEL_FLAGS_EVENT_CONSTRAINT() to only look at the event code when matching a constraint. If code+umask were needed, then the INTEL_FLAGS_UEVENT_CONSTRAINT() macro was needed instead. This broke with some of the constraints for PEBS events. Several of them, including the one used for cycles:p, cycles:pp, cycles:ppp fell in that category and caused the event to be rejected in PEBS mode. In other words, on some platforms a cmdline such as: $ perf top -e cycles:pp would fail with -EINVAL. This patch fixes this bug by properly using INTEL_FLAGS_UEVENT_CONSTRAINT() when needed in the PEBS constraint tables. Reported-by:
Stephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kan.liang@intel.com Link: http://lkml.kernel.org/r/20190521005246.423-1-eranian@google.comSigned-off-by:
-
Greg Kroah-Hartman authored
This reverts commit cf07331c which was commit ca641bae upstream. Martin writes: This commit breaks the kernel build because the vchiq_pagelist_info struct is not defined in v4.9.182. It was only added in v4.10, in commit 4807f2c0. Reported-by:
Martin Weinelt <martin@linuxlounge.net> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
John Paul Adrian Glaubitz authored
[ Upstream commit 07a6d63e ] In d5a2aa24, the name in struct console sunhv_console was changed from "ttyS" to "ttyHV" while the name in struct uart_ops sunhv_pops remained unchanged. This results in the hypervisor console device to be listed as "ttyHV0" under /proc/consoles while the device node is still named "ttyS0": root@osaka:~# cat /proc/consoles ttyHV0 -W- (EC p ) 4:64 tty0 -WU (E ) 4:1 root@osaka:~# readlink /sys/dev/char/4:64 ../../devices/root/f02836f0/f0285690/tty/ttyS0 root@osaka:~# This means that any userland code which tries to determine the name of the device file of the hypervisor console device can not rely on the information provided by /proc/consoles. In particular, booting current versions of debian- installer inside a SPARC LDOM will fail with the installer unable to determine the console device. After renaming the device in struct uart_ops sunhv_pops to "ttyHV" as well, the inconsistency is fixed and it is possible again to determine the name of the device file of the hypervisor console device by reading the contents of /proc/console: root@osaka:~# cat /proc/consoles ttyHV0 -W- (EC p ) 4:64 tty0 -WU (E ) 4:1 root@osaka:~# readlink /sys/dev/char/4:64 ../../devices/root/f02836f0/f0285690/tty/ttyHV0 root@osaka:~# With this change, debian-installer works correctly when installing inside a SPARC LDOM. Signed-off-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit f3e92cb8 ] Nine years ago, I added RCU handling to neighbours, not pneighbours. (pneigh are not commonly used) Unfortunately I missed that /proc dump operations would use a common entry and exit point : neigh_seq_start() and neigh_seq_stop() We need to read_lock(tbl->lock) or risk use-after-free while iterating the pneigh structures. We might later convert pneigh to RCU and revert this patch. sysbot reported : BUG: KASAN: use-after-free in pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158 Read of size 8 at addr ffff888097f2a700 by task syz-executor.0/9825 CPU: 1 PID: 9825 Comm: syz-executor.0 Not tainted 5.2.0-rc4+ #32 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 kasan_report+0x12/0x20 mm/kasan/common.c:614 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158 neigh_seq_next+0xdb/0x210 net/core/neighbour.c:3240 seq_read+0x9cf/0x1110 fs/seq_file.c:258 proc_reg_read+0x1fc/0x2c0 fs/proc/inode.c:221 do_loop_readv_writev fs/read_write.c:714 [inline] do_loop_readv_writev fs/read_write.c:701 [inline] do_iter_read+0x4a4/0x660 fs/read_write.c:935 vfs_readv+0xf0/0x160 fs/read_write.c:997 kernel_readv fs/splice.c:359 [inline] default_file_splice_read+0x475/0x890 fs/splice.c:414 do_splice_to+0x127/0x180 fs/splice.c:877 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:954 do_splice_direct+0x1da/0x2a0 fs/splice.c:1063 do_sendfile+0x597/0xd00 fs/read_write.c:1464 __do_sys_sendfile64 fs/read_write.c:1525 [inline] __se_sys_sendfile64 fs/read_write.c:1511 [inline] __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4592c9 Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f4aab51dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000004592c9 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000246 R12: 00007f4aab51e6d4 R13: 00000000004c689d R14: 00000000004db828 R15: 00000000ffffffff Allocated by task 9827: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_kmalloc mm/kasan/common.c:489 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503 __do_kmalloc mm/slab.c:3660 [inline] __kmalloc+0x15c/0x740 mm/slab.c:3669 kmalloc include/linux/slab.h:552 [inline] pneigh_lookup+0x19c/0x4a0 net/core/neighbour.c:731 arp_req_set_public net/ipv4/arp.c:1010 [inline] arp_req_set+0x613/0x720 net/ipv4/arp.c:1026 arp_ioctl+0x652/0x7f0 net/ipv4/arp.c:1226 inet_ioctl+0x2a0/0x340 net/ipv4/af_inet.c:926 sock_do_ioctl+0xd8/0x2f0 net/socket.c:1043 sock_ioctl+0x3ed/0x780 net/socket.c:1194 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd5f/0x1380 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9824: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:451 kasan_slab_free+0xe/0x10 mm/kasan/common.c:459 __cache_free mm/slab.c:3432 [inline] kfree+0xcf/0x220 mm/slab.c:3755 pneigh_ifdown_and_unlock net/core/neighbour.c:812 [inline] __neigh_ifdown+0x236/0x2f0 net/core/neighbour.c:356 neigh_ifdown+0x20/0x30 net/core/neighbour.c:372 arp_ifdown+0x1d/0x21 net/ipv4/arp.c:1274 inetdev_destroy net/ipv4/devinet.c:319 [inline] inetdev_event+0xa14/0x11f0 net/ipv4/devinet.c:1544 notifier_call_chain+0xc2/0x230 kernel/notifier.c:95 __raw_notifier_call_chain kernel/notifier.c:396 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:403 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1749 call_netdevice_notifiers_extack net/core/dev.c:1761 [inline] call_netdevice_notifiers net/core/dev.c:1775 [inline] rollback_registered_many+0x9b9/0xfc0 net/core/dev.c:8178 rollback_registered+0x109/0x1d0 net/core/dev.c:8220 unregister_netdevice_queue net/core/dev.c:9267 [inline] unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9260 unregister_netdevice include/linux/netdevice.h:2631 [inline] __tun_detach+0xd8a/0x1040 drivers/net/tun.c:724 tun_detach drivers/net/tun.c:741 [inline] tun_chr_close+0xe0/0x180 drivers/net/tun.c:3451 __fput+0x2ff/0x890 fs/file_table.c:280 ____fput+0x16/0x20 fs/file_table.c:313 task_work_run+0x145/0x1c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:185 [inline] exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:168 prepare_exit_to_usermode arch/x86/entry/common.c:199 [inline] syscall_return_slowpath arch/x86/entry/common.c:279 [inline] do_syscall_64+0x58e/0x680 arch/x86/entry/common.c:304 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff888097f2a700 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 0 bytes inside of 64-byte region [ffff888097f2a700, ffff888097f2a740) The buggy address belongs to the page: page:ffffea00025fca80 refcount:1 mapcount:0 mapping:ffff8880aa400340 index:0x0 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea000250d548 ffffea00025726c8 ffff8880aa400340 raw: 0000000000000000 ffff888097f2a000 0000000100000020 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888097f2a600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc ffff888097f2a680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff888097f2a700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ffff888097f2a780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff888097f2a800: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc Fixes: 767e97e1 ("neigh: RCU conversion of struct neighbour") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Jeremy Sowden authored
[ Upstream commit 6be8e297 ] lapb_register calls lapb_create_cb, which initializes the control- block's ref-count to one, and __lapb_insert_cb, which increments it when adding the new block to the list of blocks. lapb_unregister calls __lapb_remove_cb, which decrements the ref-count when removing control-block from the list of blocks, and calls lapb_put itself to decrement the ref-count before returning. However, lapb_unregister also calls __lapb_devtostruct to look up the right control-block for the given net_device, and __lapb_devtostruct also bumps the ref-count, which means that when lapb_unregister returns the ref-count is still 1 and the control-block is leaked. Call lapb_put after __lapb_devtostruct to fix leak. Reported-by: syzbot+afb980676c836b4a0afa@syzkaller.appspotmail.com Signed-off-by:
Jeremy Sowden <jeremy@azazel.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 65a3c497 ] Before taking a refcount, make sure the object is not already scheduled for deletion. Same fix is needed in ipv6_flowlabel_opt() Fixes: 18367681 ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.") Signed-off-by:
-
Ivan Vecera authored
[ Upstream commit 718f4a25 ] Number of Rx queues used for flow hashing returned by the driver is incorrect and this bug prevents user to use the last Rx queue in indirection table. Let's say we have a NIC with 6 combined queues: [root@sm-03 ~]# ethtool -l enp4s0f0 Channel parameters for enp4s0f0: Pre-set maximums: RX: 5 TX: 5 Other: 0 Combined: 6 Current hardware settings: RX: 0 TX: 0 Other: 0 Combined: 6 Default indirection table maps all (6) queues equally but the driver reports only 5 rings available. [root@sm-03 ~]# ethtool -x enp4s0f0 RX flow hash indirection table for enp4s0f0 with 5 RX ring(s): 0: 0 1 2 3 4 5 0 1 8: 2 3 4 5 0 1 2 3 16: 4 5 0 1 2 3 4 5 24: 0 1 2 3 4 5 0 1 ... Now change indirection table somehow: [root@sm-03 ~]# ethtool -X enp4s0f0 weight 1 1 [root@sm-03 ~]# ethtool -x enp4s0f0 RX flow hash indirection table for enp4s0f0 with 6 RX ring(s): 0: 0 0 0 0 0 0 0 0 ... 64: 1 1 1 1 1 1 1 1 ... Now it is not possible to change mapping back to equal (default) state: [root@sm-03 ~]# ethtool -X enp4s0f0 equal 6 Cannot set RX flow hash configuration: Invalid argument Fixes: 594ad54a ("be2net: Add support for setting and getting rx flow hash options") Reported-by:
Tianhao <tizhao@redhat.com> Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d4d5d8e8 ] Before thread in process context uses bh_lock_sock() we must disable bh. sysbot reported : WARNING: inconsistent lock state 5.2.0-rc3+ #32 Not tainted inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. blkid/26581 [HC0[0]:SC1[1]:HE1:SE0] takes: 00000000e0da85ee (slock-AF_AX25){+.?.}, at: spin_lock include/linux/spinlock.h:338 [inline] 00000000e0da85ee (slock-AF_AX25){+.?.}, at: ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275 {SOFTIRQ-ON-W} state was registered at: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:338 [inline] ax25_rt_autobind+0x3ca/0x720 net/ax25/ax25_route.c:429 ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1221 __sys_connect+0x264/0x330 net/socket.c:1834 __do_sys_connect net/socket.c:1845 [inline] __se_sys_connect net/socket.c:1842 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1842 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe irq event stamp: 2272 hardirqs last enabled at (2272): [<ffffffff810065f3>] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (2271): [<ffffffff8100660f>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (1522): [<ffffffff87400654>] __do_softirq+0x654/0x94c kernel/softirq.c:320 softirqs last disabled at (2267): [<ffffffff81449010>] invoke_softirq kernel/softirq.c:374 [inline] softirqs last disabled at (2267): [<ffffffff81449010>] irq_exit+0x180/0x1d0 kernel/softirq.c:414 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_AX25); <Interrupt> lock(slock-AF_AX25); *** DEADLOCK *** 1 lock held by blkid/26581: #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:175 [inline] #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: call_timer_fn+0xe0/0x720 kernel/time/timer.c:1312 stack backtrace: CPU: 1 PID: 26581 Comm: blkid Not tainted 5.2.0-rc3+ #32 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_usage_bug.cold+0x393/0x4a2 kernel/locking/lockdep.c:2935 valid_state kernel/locking/lockdep.c:2948 [inline] mark_lock_irq kernel/locking/lockdep.c:3138 [inline] mark_lock+0xd46/0x1370 kernel/locking/lockdep.c:3513 mark_irqflags kernel/locking/lockdep.c:3391 [inline] __lock_acquire+0x159f/0x5490 kernel/locking/lockdep.c:3745 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:338 [inline] ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275 call_timer_fn+0x193/0x720 kernel/time/timer.c:1322 expire_timers kernel/time/timer.c:1366 [inline] __run_timers kernel/time/timer.c:1685 [inline] __run_timers kernel/time/timer.c:1653 [inline] run_timer_softirq+0x66f/0x1740 kernel/time/timer.c:1698 __do_softirq+0x25c/0x94c kernel/softirq.c:293 invoke_softirq kernel/softirq.c:374 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:414 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x13b/0x550 arch/x86/kernel/apic/apic.c:1068 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:806 </IRQ> RIP: 0033:0x7f858d5c3232 Code: 8b 61 08 48 8b 84 24 d8 00 00 00 4c 89 44 24 28 48 8b ac 24 d0 00 00 00 4c 8b b4 24 e8 00 00 00 48 89 7c 24 68 48 89 4c 24 78 <48> 89 44 24 58 8b 84 24 e0 00 00 00 89 84 24 84 00 00 00 8b 84 24 RSP: 002b:00007ffcaf0cf5c0 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 RAX: 00007f858d7d27a8 RBX: 00007f858d7d8820 RCX: 00007f858d3940d8 RDX: 00007ffcaf0cf798 RSI: 00000000f5e616f3 RDI: 00007f858d394fee RBP: 0000000000000000 R08: 00007ffcaf0cf780 R09: 00007f858d7db480 R10: 0000000000000000 R11: 0000000009691a75 R12: 0000000000000005 R13: 00000000f5e616f3 R14: 0000000000000000 R15: 00007ffcaf0cf798 Signed-off-by:
-
Baruch Siach authored
commit ecb4a353 upstream. The RTC_VL_READ ioctl reports the low battery condition. Still, pcf8523_rtc_read_time() happily returns invalid dates in this case. Check the battery health on pcf8523_rtc_read_time() to avoid that. Reported-by:
Erik Čuk <erik.cuk@domel.com> Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Daniele Palmas authored
commit f3dfd407 upstream. Added support for Telit LE910Cx 0x1260 and 0x1261 compositions. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jörgen Storvist authored
commit 5417a7e4 upstream. Added IDs for Simcom SIM7500/SIM7600 series cellular module in RNDIS mode. Reserved the interface for ADB. T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9011 Rev=03.18 S: Manufacturer=SimTech, Incorporated S: Product=SimTech, Incorporated S: SerialNumber=0123456789ABCDEF C: #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) Signed-off-by:
Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Chris Packham authored
commit c5f81656 upstream. This is adds the vendor and device id for the AT-VT-Kit3 which is a pl2303-based device. Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
