- 11 Aug, 2021 40 commits
-
-
David S. Miller authored
Vladimir Oltean says: ==================== DSA tagger helpers The goal of this series is to minimize the use of memmove and skb->data in the DSA tagging protocol drivers. Unfiltered access to this level of information is not very friendly to drive-by contributors, and sometimes is also not the easiest to review. For starters, I have converted the most common form of DSA tagging protocols: the DSA headers which are placed where the EtherType is. The helper functions introduced by this series are: - dsa_alloc_etype_header - dsa_strip_etype_header - dsa_etype_header_pos_rx - dsa_etype_header_pos_tx This series is just a resend as non-RFC of v1. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Create a similar helper for locating the offset to the DSA header relative to skb->data, and make the existing EtherType header taggers to use it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
It seems that protocol tagging driver writers are always surprised about the formula they use to reach their EtherType header on RX, which becomes apparent from the fact that there are comments in multiple drivers that mention the same information. Create a helper that returns a void pointer to skb->data - 2, as well as centralize the explanation why that is the case. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Hide away the memmove used by DSA EtherType header taggers to shift the MAC SA and DA to the left to make room for the header, after they've called skb_push(). The call to skb_push() is still left explicit in drivers, to be symmetric with dsa_strip_etype_header, and because not all callers can be refactored to do it (for example, brcm_tag_xmit_ll has common code for a pre-Ethernet DSA tag and an EtherType DSA tag). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
All header taggers open-code a memmove that is fairly not all that obvious, and we can hide the details behind a helper function, since the only thing specific to the driver is the length of the header tag. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Parav Pandit says: ==================== devlink: Control auxiliary devices Currently, for mlx5 multi-function device, a user is not able to control which functionality to enable/disable. For example, each PCI PF, VF, SF function by default has netdevice, RDMA and vdpa-net devices always enabled. Hence, enable user to control which device functionality to enable/disable. This is achieved by using existing devlink params [1] to enable/disable eth, rdma and vdpa net functionality control knob. For example user interested in only vdpa device function: performs, $ devlink dev param set pci/0000:06:00.0 name enable_rdma value false \ cmode driverinit $ devlink dev param set pci/0000:06:00.0 name enable_eth value false \ cmode driverinit $ devlink dev param set pci/0000:06:00.0 name enable_vnet value true \ cmode driverinit $ devlink dev reload pci/0000:06:00.0 Reload command honors parameters set, initializes the device that user has composed using devlink dev params and resources. Devices before reload: mlx5_core.sf.4 (subfunction device) /\ /| \ / | \ / | \ mlx5_core.eth.4 | mlx5_core.rdma.4 (SF eth aux dev) | (SF rdma aux dev) | | | | | | enp6s0f0s88 | mlx5_0 (SF netdev) | (SF rdma device) | mlx5_core.vnet.4 (SF vnet aux dev) | | auxiliary/mlx5_core.sf.4 (vdpa net mgmt device) Above example reconfigures the device with only VDPA functionality. Devices after reload: mlx5_core.sf.4 (subfunction device) /\ / \ / \ / \ mlx5_core.vnet.4 no eth, no rdma aux devices (SF vnet aux dev) Above parameters enable user to compose the device as needed based on the use case. Since devlink params are done on the devlink instance, these knobs are uniformly usable for PCI PF, VF and SF devices. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Parav Pandit authored
Enable user to disable VDPA net auxiliary device so that when it is not required, user can disable it. For example, $ devlink dev param set pci/0000:06:00.0 \ name enable_vnet value false cmode driverinit $ devlink dev reload pci/0000:06:00.0 At this point devlink instance do not create auxiliary device mlx5_core.vnet.2 for the VDPA net functionality. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Parav Pandit authored
Enable user to disable RDMA auxiliary device so that when it is not required, user can disable it. For example, $ devlink dev param set pci/0000:06:00.0 \ name enable_rdma value false cmode driverinit $ devlink dev reload pci/0000:06:00.0 At this point devlink instance do not create auxiliary device mlx5_core.rdma.2 for the RDMA functionality. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Parav Pandit authored
Enable user to disable Ethernet auxiliary device so that when it is not required, user can disable it. For example, $ devlink dev param set pci/0000:06:00.0 \ name enable_eth value false cmode driverinit $ devlink dev reload pci/0000:06:00.0 At this point devlink instance do not create mlx5_core.eth.2 auxiliary device for the Ethernet functionality. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Parav Pandit authored
Cleanup routine missed to unpublish the parameters. Add it. Fixes: e890acd5 ("net/mlx5: Add devlink flow_steering_mode parameter") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Parav Pandit authored
Enable drivers to publish/unpublish individual parameter. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Parav Pandit authored
Currently device configuration parameters can be registered as an array. Due to this a constant array must be registered. A single driver supporting multiple devices each with different device capabilities end up registering all parameters even if it doesn't support it. One possible workaround a driver can do is, it registers multiple single entry arrays to overcome such limitation. Better is to provide a API that enables driver to register/unregister a single parameter. This also further helps in two ways. (1) to reduce the memory of devlink_param_entry by avoiding in registering parameters which are not supported by the device. (2) avoid generating multiple parameter add, delete, publish, unpublish, init value notifications for such unsupported parameters Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Parav Pandit authored
Create and use a helper function for one parameter registration. Subsequent patch also will reuse this for driver facing routine to register a single parameter. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Parav Pandit authored
Add new device generic parameter to enable/disable creation of VDPA net auxiliary device and associated device functionality in the devlink instance. User who prefers to disable such functionality can disable it using below example. $ devlink dev param set pci/0000:06:00.0 \ name enable_vnet value false cmode driverinit $ devlink dev reload pci/0000:06:00.0 At this point devlink instance do not create auxiliary device for the VDPA net functionality. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Parav Pandit authored
Add new device generic parameter to enable/disable creation of RDMA auxiliary device and associated device functionality in the devlink instance. User who prefers to disable such functionality can disable it using below example. $ devlink dev param set pci/0000:06:00.0 \ name enable_rdma value false cmode driverinit $ devlink dev reload pci/0000:06:00.0 At this point devlink instance do not create auxiliary device for the RDMA functionality. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Parav Pandit authored
Add new device generic parameter to enable/disable creation of Ethernet auxiliary device and associated device functionality in the devlink instance. User who prefers to disable such functionality can disable it using below example. $ devlink dev param set pci/0000:06:00.0 \ name enable_eth value false cmode driverinit $ devlink dev reload pci/0000:06:00.0 At this point devlink instance do not create auxiliary device for the Ethernet functionality. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== net: bridge: vlan: add global mcast options This is the first follow-up set after the support for per-vlan multicast contexts which extends global vlan options to support bridge's multicast config per-vlan, it enables user-space to change and dump the already existing bridge vlan multicast context options. The global option patches (01 - 09 and 12-13) follow a similar pattern of changing current mcast functions to take multicast context instead of a port/bridge directly. Option equality checks have been added for dumping vlan range compression. The last 2 patches extend the mcast router dump support so it can be re-used when dumping vlan config. patches 01 - 09: add support for various mcast options patches 10 - 11: prepare for per-vlan querier control patches 12 - 13: add support for querier control and router control patches 14 - 15: add support for dumping per-vlan router ports Next patch-sets: - per-port/vlan router option config - iproute2 support for all new vlan options - selftests ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Embed the standard multicast router port export by br_rports_fill_info() into a new global vlan attribute BRIDGE_VLANDB_GOPTS_MCAST_ROUTER_PORTS. In order to have the same format for the global bridge mcast context and the per-vlan mcast context we need a double-nesting: - BRIDGE_VLANDB_GOPTS_MCAST_ROUTER_PORTS - MDBA_ROUTER Currently we don't compare router lists, if any router port exists in the bridge mcast contexts we consider their option sets as different and export them separately. In addition we export the router port vlan id when dumping similar to the router port notification format. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
When we are dumping the router ports of a vlan mcast context we need to use the bridge/vlan and port/vlan's multicast contexts to check if IPv4/IPv6 router port is present and later to dump the vlan id. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add support to change and retrieve global vlan multicast router state which is used for the bridge itself. We just need to pass multicast context to br_multicast_set_router instead of bridge device and the rest of the logic remains the same. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add support to change and retrieve global vlan multicast querier state. We just need to pass multicast context to br_multicast_set_querier instead of bridge device and the rest of the logic remains the same. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
It is a minor optimization and better behaviour to make sure querier and query sending routines affect only the matching multicast context depending if vlan snooping is enabled (vlan ctx vs bridge ctx). It also avoids sending unnecessary extra query packets. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
We need to have the querier state per multicast context in order to have per-vlan control, so remove the internal option bit and move it to the multicast context. Also annotate the lockless reads of the new variable. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add support to change and retrieve global vlan multicast startup query interval option. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add support to change and retrieve global vlan multicast query response interval option. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add support to change and retrieve global vlan multicast query interval option. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add support to change and retrieve global vlan multicast querier interval option. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add support to change and retrieve global vlan multicast membership interval option. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add support to change and retrieve global vlan multicast last member interval option. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add support to change and retrieve global vlan multicast startup query count option. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add support to change and retrieve global vlan multicast last member count option. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add support to change and retrieve global vlan IGMP/MLD versions. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: use runtime PM reference counting This series does further rework of the IPA clock code so that we rely on some of the core runtime power management code (including its referencing counting) instead. The first patch makes ipa_clock_get() act like pm_runtime_get_sync(). The second patch makes system suspend occur regardless of the current reference count value, which is again more like how the runtime PM core code behaves. The third patch creates functions to encapsulate all hardware suspend and resume activity. The fourth uses those functions as the ->runtime_suspend and ->runtime_resume power callbacks. With that in place, ipa_clock_get() and ipa_clock_put() are changed to use runtime PM get and put functions when needed. The fifth patch eliminates an extra clock reference previously used to control system suspend. The sixth eliminates the "IPA clock" reference count and mutex. The final patch replaces the one call to ipa_clock_get_additional() with a call to pm_runtime_get_if_active(), making the former unnecessary. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Now that ipa_clock_get_additional() is a trivial wrapper around pm_runtime_get_if_active(), just open-code it in its only caller and delete the function. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alex Elder authored
The runtime power management core code maintains a usage count. This count mirrors the IPA clock reference count, and there's no need to maintain both. So get rid of the IPA clock reference count and just rely on the runtime PM usage count to determine when the hardware should be suspended or resumed. Use pm_runtime_get_if_active() in ipa_clock_get_additional(). We care whether power is active, regardless of whether it's in use, so pass true for its ign_usage_count argument. The IPA clock mutex is just used to make enabling/disabling the clock and updating the reference count occur atomically. Without the reference count, there's no need for the mutex, so get rid of that too. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Suspending the IPA hardware is now managed by the runtime PM core code. The ->runtime_idle callback returns a non-zero value, so it will never suspend except when forced. As a result, there's no need to take an extra "do not suspend" clock reference. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Use the runtime power management core to cause hardware suspend and resume to occur. Enable it in ipa_clock_init() (without autosuspend), and disable it in ipa_clock_exit(). Use ipa_runtime_suspend() as the ->runtime_suspend power operation, and arrange for it to be called by having ipa_clock_get() call pm_runtime_get_sync() when the first clock reference is taken. Similarly, use ipa_runtime_resume() as the ->runtime_resume power operation, and pm_runtime_put() when the last IPA clock reference is dropped. Introduce ipa_runtime_idle() as the ->runtime_idle power operation, and have it return a non-zero value; this way suspend will never occur except when forced. Use pm_runtime_force_suspend() and pm_runtime_force_resume() as the system suspend and resume callbacks, and remove ipa_suspend() and ipa_resume(). Store a pointer to the device structure passed to ipa_clock_init(), so it can be used by ipa_clock_exit() to disable runtime power management. For now we preserve IPA clock reference counting. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Introduce ipa_runtime_suspend() and ipa_runtime_resume(), which encapsulate the activities necessary for suspending and resuming the IPA hardware. Call these functions from ipa_clock_get() and ipa_clock_put() when the first reference is taken or last one is dropped. When the very first clock reference is taken (for ipa_config()), setup isn't complete yet, so (as before) only the core clock gets enabled. When the last clock reference is dropped (after ipa_deconfig()), ipa_teardown() will have made the setup_complete flag false, so there too, the core clock will be stopped without affecting GSI or the endpoints. Otherwise these new functions will perform the desired suspend and resume actions once setup is complete. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Disable the IPA clock rather than dropping a reference to it in the system suspend callback. This forces the suspend to occur without affecting existing references. Similarly, enable the clock rather than taking a reference in ipa_resume(), forcing a resume without changing the reference count. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alex Elder authored
We currently assume no errors occur when enabling or disabling the IPA core clock and interconnects. And although this commit exposes errors that could occur, we generally assume this won't happen in practice. This commit changes ipa_clock_get() and ipa_clock_put() so each returns a value. The values returned are meant to mimic what the runtime power management functions return, so we can set up error handling here before we make the switch. Have ipa_clock_get() increment the reference count even if it returns an error, to match the behavior of pm_runtime_get(). More details follow. When taking a reference in ipa_clock_get(), return 0 for the first reference, 1 for subsequent references, or a negative error code if an error occurs. Note that if ipa_clock_get() returns an error, we must not touch hardware; in some cases such errors now cause entire blocks of code to be skipped. When dropping a reference in ipa_clock_put(), we return 0 or an error code. The error would come from ipa_clock_disable(), which now returns what ipa_interconnect_disable() returns (either 0 or a negative error code). For now, callers ignore the return value; if an error occurs, a message will have already been logged, and little more can actually be done to improve the situation. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-