- 21 Aug, 2024 33 commits
-
-
Alex Deucher authored
Otherwise we can fail to drop the software mutex when we fail to take the hardware mutex. Fixes: 76acba7b ("drm/amdgpu/gfx11: add a mutex for the gfx semaphore") Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com>
-
Tim Huang authored
This resolves the dereference null return value warning reported by Coverity. Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
Jesse Zhang <jesse.zhang@amd.com> Signed-off-by:
-
Victor Zhao authored
when use cpu to do page table update under sriov runtime, since mmio access is blocked, kiq has to be used to flush hdp. change WREG32_NO_KIQ to WREG32 to allow kiq. Signed-off-by:
Victor Zhao <Victor.Zhao@amd.com> Reviewed-by:
Emily Deng <Emily.Deng@amd.com> Signed-off-by:
-
Alex Deucher authored
The driver needs to wait for the on board firmware to finish its initialization before probing the card. Commit 95905698 ("drm/amdgpu: Fix discovery initialization failure during pci rescan") switched from using msleep() to using usleep_range() which seems to have caused init failures on some navi1x boards. Switch back to msleep(). Fixes: 95905698 ("drm/amdgpu: Fix discovery initialization failure during pci rescan") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3559 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3500Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Martin Leung authored
- Various DML 2.1 fixes - Fix module unload - Fix construct_phy with MXM connector - Support UHBR10 link rate on eDP - Revert updated DCCG wrappers Reviewed-by:
Roman Li <roman.li@amd.com> Signed-off-by:
Martin Leung <Martin.Leung@amd.com> Signed-off-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Austin Zheng authored
[Why and How] DML2.1 reintegration for several fixes and updates to the DML code. Reviewed-by:
Dillon Varone <dillon.varone@amd.com> Signed-off-by:
Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Roman Li <roman.li@amd Tested-by:
-
Tim Huang authored
Flexible endpoints use DIGs from available inflexible endpoints, so only the encoders of inflexible links need to be freed. Otherwise, a double free issue may occur when unloading the amdgpu module. [ 279.190523] RIP: 0010:__slab_free+0x152/0x2f0 [ 279.190577] Call Trace: [ 279.190580] <TASK> [ 279.190582] ? show_regs+0x69/0x80 [ 279.190590] ? die+0x3b/0x90 [ 279.190595] ? do_trap+0xc8/0xe0 [ 279.190601] ? do_error_trap+0x73/0xa0 [ 279.190605] ? __slab_free+0x152/0x2f0 [ 279.190609] ? exc_invalid_op+0x56/0x70 [ 279.190616] ? __slab_free+0x152/0x2f0 [ 279.190642] ? asm_exc_invalid_op+0x1f/0x30 [ 279.190648] ? dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191096] ? __slab_free+0x152/0x2f0 [ 279.191102] ? dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191469] kfree+0x260/0x2b0 [ 279.191474] dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191821] link_destroy+0xd7/0x130 [amdgpu] [ 279.192248] dc_destruct+0x90/0x270 [amdgpu] [ 279.192666] dc_destroy+0x19/0x40 [amdgpu] [ 279.193020] amdgpu_dm_fini+0x16e/0x200 [amdgpu] [ 279.193432] dm_hw_fini+0x26/0x40 [amdgpu] [ 279.193795] amdgpu_device_fini_hw+0x24c/0x400 [amdgpu] [ 279.194108] amdgpu_driver_unload_kms+0x4f/0x70 [amdgpu] [ 279.194436] amdgpu_pci_remove+0x40/0x80 [amdgpu] [ 279.194632] pci_device_remove+0x3a/0xa0 [ 279.194638] device_remove+0x40/0x70 [ 279.194642] device_release_driver_internal+0x1ad/0x210 [ 279.194647] driver_detach+0x4e/0xa0 [ 279.194650] bus_remove_driver+0x6f/0xf0 [ 279.194653] driver_unregister+0x33/0x60 [ 279.194657] pci_unregister_driver+0x44/0x90 [ 279.194662] amdgpu_exit+0x19/0x1f0 [amdgpu] [ 279.194939] __do_sys_delete_module.isra.0+0x198/0x2f0 [ 279.194946] __x64_sys_delete_module+0x16/0x20 [ 279.194950] do_syscall_64+0x58/0x120 [ 279.194954] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 279.194980] </TASK> Reviewed-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
-
Nicholas Susanto authored
[Why] Causes hard hangs when resuming after display off on extended/duplicate modes [How] Set the min dispclk to 50Mhz for DCN35 Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by:
-
Ilya Bakoulin authored
[Why/How] The call to construct_phy will fail in cases where connector type is MXM, and the dc_link won't be properly created/initialized. Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Signed-off-by:
Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by:
-
Sung Joon Kim authored
[why] Supporting UHBR10 link rate on eDP leverages the existing DP2.0 code but need to add some small adjustments in code. [how] Acknowledge the given DPCD caps for UHBR10 link rate support and allow DP2.0 programming sequence and link training for eDP. Reviewed-by:
Sung Joon Kim <Sungjoon.Kim@amd.com> Signed-off-by:
-
Nevenko Stupar authored
[Why & How] DCN4 Cursor has separate degamma block and should always do Cursor degamma for Cursor color modes. Reviewed-by:
Chris Park <chris.park@amd.com> Signed-off-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Signed-off-by:
-
Michael Strauss authored
[WHY] eDP 2.0 is introducing support for UHBR link rates, however current eDP ILR link optimization does not account for UHBR capabilities. Either UHBR capabilities will be provided via the same 128b/132b rate DPCD caps that are currently used on DP2.1, or Table 4-13 may be updated to include UHBR rates. [HOW] Add extra Supported Link Rates table translations for UHBR10/13.5/20. Update eDP link setting optimization search to be aware of 128b/132b DPCD rate caps in order to unblock UHBR on panels with Supported Link Rates table. Reviewed-by:
Michael Strauss <michael.strauss@amd.com> Signed-off-by:
-
Nicholas Susanto authored
Removing redundant condition. Reviewed-by:
Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by:
-
Aurabindo Pillai authored
when removing the amdgpu module and reinserting it, a call trace is triggered: [ 334.230602] RIP: 0010:hubbub2_get_dchub_ref_freq+0xbb/0xe0 [amdgpu] [ 334.230807] Code: 25 28 00 00 00 75 3c 48 8d 65 f0 5b 41 5c 5d 31 c0 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 45 31 db e9 55 a1 ca de <0f> 0b eb c6 0f 0b eb c2 d1 eb 8d 83 c0 63 ff ff 3d 20 4e 00 00 76 [ 334.230809] RSP: 0018:ffffbc8b823fb540 EFLAGS: 00010246 [ 334.230811] RAX: 0000000000001000 RBX: 00000000000186a0 RCX: 0000000000000000 [ 334.230812] RDX: ffffbc8b823fb544 RSI: 0000000000000000 RDI: 0000000000000000 [ 334.230813] RBP: ffffbc8b823fb560 R08: 0000000000000000 R09: 0000000000000000 [ 334.230814] R10: 0000000000000000 R11: 000000000000000f R12: ffff9e644f1f2bb0 [ 334.230815] R13: ffff9e6451361300 R14: 0000000000000000 R15: ffff9e6452c00000 [ 334.230816] FS: 00007af7c8519000(0000) GS:ffff9e737dd00000(0000) knlGS:0000000000000000 [ 334.230817] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 334.230818] CR2: 0000703576b9cbd0 CR3: 00000001095a2000 CR4: 0000000000750ee0 [ 334.230819] PKRU: 55555554 [ 334.230820] Call Trace: [ 334.230822] <TASK> [ 334.230824] ? show_regs+0x6d/0x80 [ 334.230828] ? __warn+0x89/0x160 [ 334.230832] ? hubbub2_get_dchub_ref_freq+0xbb/0xe0 [amdgpu] [ 334.231024] ? report_bug+0x17e/0x1b0 [ 334.231028] ? handle_bug+0x46/0x90 [ 334.231030] ? exc_invalid_op+0x18/0x80 [ 334.231032] ? asm_exc_invalid_op+0x1b/0x20 [ 334.231036] ? hubbub2_get_dchub_ref_freq+0xbb/0xe0 [amdgpu] [ 334.231217] dc_create_resource_pool+0xfd/0x320 [amdgpu] [ 334.231408] dc_create+0x256/0x700 [amdgpu] [ 334.231588] ? srso_alias_return_thunk+0x5/0x7f [ 334.231590] ? dmi_matches+0xa0/0x230 [ 334.231594] amdgpu_dm_init+0x28c/0x25f0 [amdgpu] [ 334.231791] ? prb_read_valid+0x1c/0x30 [ 334.231795] ? __irq_work_queue_local+0x43/0xf0 [ 334.231798] ? srso_alias_return_thunk+0x5/0x7f [ 334.231800] ? irq_work_queue+0x2f/0x70 [ 334.231802] ? srso_alias_return_thunk+0x5/0x7f [ 334.231803] ? __wake_up_klogd.part.0+0x40/0x70 [ 334.231805] ? srso_alias_return_thunk+0x5/0x7f [ 334.231807] ? vprintk_emit+0xd9/0x210 [ 334.231809] ? set_dev_info+0x130/0x1c0 [ 334.231812] ? srso_alias_return_thunk+0x5/0x7f [ 334.231813] ? dev_printk_emit+0xa1/0xe0 [ 334.231819] dm_hw_init+0x14/0x30 [amdgpu] [ 334.231993] amdgpu_device_init+0x23c7/0x2fc0 [amdgpu] [ 334.232134] ? pci_read_config_word+0x25/0x50 [ 334.232139] amdgpu_driver_load_kms+0x1a/0xd0 [amdgpu] [ 334.232284] amdgpu_pci_probe+0x1f9/0x620 [amdgpu] On DCN401, get_dchub_ref_freq() hook is called before init_hw() hook. Hence, it is expected to trigger an assert. Remove the extraneous call to get_dchub_ref_freq() to suppress the call trace Reviewed-by:
Alvin Lee <alvin.lee2@amd.com> Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Michael Strauss authored
[WHY] Previous multi-display HPO fix moved where HPO I/O enable/disable is performed. The codepath now taken to enable/disable HPO I/O is not used for compliance test automation, meaning that if a compliance box being driven at a DP1 rate requests retrain at UHBR, HPO I/O will remain off if it was previously off. [HOW] Explicitly update HPO I/O after allocating encoders for test request. Reviewed-by:
Charlene Liu <charlene.liu@amd.com> Reviewed-by:
-
Hansen Dsouza authored
[Why] Revert updated DCCG wrappers due to regression [How] This reverts commit 680458d4. Reviewed-by:
-
Candice Li authored
Add TA binary size validation to avoid OOB write. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
-
Mukul Joshi authored
Based on the recommendation of MEC FW, update BadOpcode interrupt handling by unmapping all queues, removing the queue that got the interrupt from scheduling and remapping rest of the queues back when using MES scheduler. This is done to prevent the case where unmapping of the bad queue can fail thereby causing a GPU reset. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Acked-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Acked-by:
Felix Kuehling <felix.kuehling@amd.com> Signed-off-by:
-
Mukul Joshi authored
MEC FW expects MES to unmap all queues when a VM fault is observed on a queue and then resumed once the affected process is terminated. Use the MES Suspend and Resume APIs to achieve this. Signed-off-by:
-
Mukul Joshi authored
Add implementation for MES Suspend and Resume APIs to unmap/map all queues for GFX11. Support for GFX12 will be added when the corresponding firmware support is in place. Signed-off-by:
-
Amber Lin authored
When amdgpu enable enforce_isolation, KFD enables single-process mode in HWS and sets exec_cleaner_shader bit in MAP_PROCESS. Signed-off-by:
Amber Lin <Amber.Lin@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit applies isolation enforcement to the GFX and Compute rings in the gfx_v9_4_3 module. The commit sets `amdgpu_gfx_enforce_isolation_ring_begin_use` and `amdgpu_gfx_enforce_isolation_ring_end_use` as the functions to be called when a ring begins and ends its use, respectively. `amdgpu_gfx_enforce_isolation_ring_begin_use` is called when a ring begins its use. This function cancels any scheduled `enforce_isolation_work` and, if necessary, signals the Kernel Fusion Driver (KFD) to stop the runqueue. `amdgpu_gfx_enforce_isolation_ring_end_use` is called when a ring ends its use. This function schedules `enforce_isolation_work` to be run after a delay. These functions are part of the Enforce Isolation Handler, which enforces shader isolation on AMD GPUs to prevent data leakage between different processes. The commit also includes a check for the type of the ring. If the type of the ring is `AMDGPU_RING_TYPE_COMPUTE`, the `xcp_id` of the `enforce_isolation` structure in the `gfx` structure of the `amdgpu_device` is set to the `xcp_id` of the ring. This ensures that the correct `xcp_id` is used when enforcing isolation on compute rings. The `xcp_id` is an identifier for an XCP partition, and different rings can be associated with different XCP partitions. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
-
Srinivasan Shanmugam authored
This commit applies isolation enforcement to the GFX and Compute rings in the gfx_v9_0 module. The commit sets `amdgpu_gfx_enforce_isolation_ring_begin_use` and `amdgpu_gfx_enforce_isolation_ring_end_use` as the functions to be called when a ring begins and ends its use, respectively. `amdgpu_gfx_enforce_isolation_ring_begin_use` is called when a ring begins its use. This function cancels any scheduled `enforce_isolation_work` and, if necessary, signals the Kernel Fusion Driver (KFD) to stop the runqueue. `amdgpu_gfx_enforce_isolation_ring_end_use` is called when a ring ends its use. This function schedules `enforce_isolation_work` to be run after a delay. These functions are part of the Enforce Isolation Handler, which enforces shader isolation on AMD GPUs to prevent data leakage between different processes. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com>
-
Srinivasan Shanmugam authored
This commit introduces the Enforce Isolation Handler designed to enforce shader isolation on AMD GPUs, which helps to prevent data leakage between different processes. The handler counts the number of emitted fences for each GFX and compute ring. If there are any fences, it schedules the `enforce_isolation_work` to be run after a delay of `GFX_SLICE_PERIOD`. If there are no fences, it signals the Kernel Fusion Driver (KFD) to resume the runqueue. The function is synchronized using the `enforce_isolation_mutex`. This commit also introduces a reference count mechanism (kfd_sch_req_count) to keep track of the number of requests to enable the KFD scheduler. When a request to enable the KFD scheduler is made, the reference count is decremented. When the reference count reaches zero, a delayed work is scheduled to enforce isolation after a delay of GFX_SLICE_PERIOD. When a request to disable the KFD scheduler is made, the function first checks if the reference count is zero. If it is, it cancels the delayed work for enforcing isolation and checks if the KFD scheduler is active. If the KFD scheduler is active, it sends a request to stop the KFD scheduler and sets the KFD scheduler state to inactive. Then, it increments the reference count. The function is synchronized using the kfd_sch_mutex to ensure that the KFD scheduler state and reference count are updated atomically. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Amber Lin authored
Provide amdgpu_amdkfd_stop_sched() for amdgpu to stop KFD scheduling compute work on HIQ. amdgpu_amdkfd_start_sched() resumes the scheduling. When amdgpu_amdkfd_stop_sched is called, KFD will unmap queues from runlist. If users send ioctls to KFD to create queues, they'll be added but those queues won't be mapped to runlist (so not scheduled) until amdgpu_amdkfd_start_sched is called. v2: fix build (Alex) Signed-off-by:
-
Srinivasan Shanmugam authored
This commit extends the cleaner shader feature to support GFX9.4.4 hardware. The cleaner shader feature is used to clear or initialize certain GPU resources, such as Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs). This operation needs to be performed in isolation, while no other tasks should be running on the GPU at the same time. Previously, the cleaner shader feature was implemented for GFX9.4.3 hardware. This commit adds support for GFX9.4.4 hardware by allowing the cleaner shader to be used with this hardware version. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit adds the cleaner shader microcode for GFX9.4.3 GPUs. The cleaner shader is a piece of GPU code that is used to clear or initialize certain GPU resources, such as Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs). Clearing these resources is important for ensuring data isolation between different workloads running on the GPU. Without the cleaner shader, residual data from a previous workload could potentially be accessed by a subsequent workload, leading to data leaks and incorrect computation results. The cleaner shader microcode is represented as an array of 32-bit words (`gfx_9_4_3_cleaner_shader_hex`). This array is the binary representation of the cleaner shader code, which is written in a low-level GPU instruction set. When the cleaner shader feature is enabled, the AMDGPU driver loads this array into a specific location in the GPU memory. The GPU then reads this memory location to fetch and execute the cleaner shader instructions. The cleaner shader is executed automatically by the GPU at the end of each workload, before the next workload starts. This ensures that all GPU resources are in a clean state before the start of each workload. This addition is part of the cleaner shader feature implementation. The cleaner shader feature helps improve GPU performance and resource utilization by cleaning up GPU resources after they are used. It also enhances security and reliability by preventing data leaks between workloads. v2: fix copyright date (Alex) Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
The patch modifies the gfx_v9_4_3_kiq_set_resources function to write the cleaner shader's memory controller address to the ring buffer. It also adds a new function, gfx_v9_4_3_ring_emit_cleaner_shader, which emits the PACKET3_RUN_CLEANER_SHADER packet to the ring buffer. This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the gfx_v9_4_3 module. This packet is used to emit the cleaner shader, which is used to clear GPU memory before it's reused, helping to prevent data leakage between different processes. Finally, the patch updates the ring function structures to include the new gfx_v9_4_3_ring_emit_cleaner_shader function. This allows the cleaner shader to be emitted as part of the ring's operations. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
The patch modifies the gfx_v9_0_kiq_set_resources function to write the cleaner shader's memory controller address to the ring buffer. It also adds a new function, gfx_v9_0_ring_emit_cleaner_shader, which emits the PACKET3_RUN_CLEANER_SHADER packet to the ring buffer. This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the gfx_v9_0 module. This packet is used to emit the cleaner shader, which is used to clear GPU memory before it's reused, helping to prevent data leakage between different processes. Finally, the patch updates the ring function structures to include the new gfx_v9_0_ring_emit_cleaner_shader function. This allows the cleaner shader to be emitted as part of the ring's operations. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit adds the PACKET3_RUN_CLEANER_SHADER definition. This packet is a command packet used to instruct the GPU to execute the cleaner shader. The cleaner shader is a piece of GPU code that is used to clear or initialize certain GPU resources, such as Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs). Clearing these resources is important for ensuring data isolation between different workloads running on the GPU. The PACKET3_RUN_CLEANER_SHADER packet is used to trigger the execution of the cleaner shader on the GPU. The packet consists of a header followed by a RESERVED field, which is programmed to zero. When the GPU receives this packet, it fetches and executes the cleaner shader instructions from the location specified in the packet. The cleaner shader feature helps to enhances security and reliability by preventing data leaks between workloads. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This patch adds a new sysfs interface for running the cleaner shader on AMD GPUs. The cleaner shader is used to clear GPU memory before it's reused, which can help prevent data leakage between different processes. The new sysfs file is write-only and is named `run_cleaner_shader`. Write the number of the partition to this file to trigger the cleaner shader on that partition. There is only one partition on GPUs which do not support partitioning. Changes made in this patch: - Added `amdgpu_set_run_cleaner_shader` function to handle writes to the `run_cleaner_shader` sysfs file. - Added `run_cleaner_shader` to the list of device attributes in `amdgpu_device_attrs`. - Updated `default_attr_update` to handle `run_cleaner_shader`. - Added `AMDGPU_DEVICE_ATTR_WO` macro to create write-only device attributes. v2: fix error handling (Alex) Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit adds a new sysfs attribute 'enforce_isolation' to control the 'enforce_isolation' setting per GPU. The attribute can be read and written, and accepts values 0 (disabled) and 1 (enabled). When 'enforce_isolation' is enabled, reserved VMIDs are allocated for each ring. When it's disabled, the reserved VMIDs are freed. The set function locks a mutex before changing the 'enforce_isolation' flag and the VMIDs, and unlocks it afterwards. This ensures that these operations are atomic and prevents race conditions and other concurrency issues. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This patch adds a new parameter 'enforce_isolation' to the amdgpu_job structure. This parameter is used to determine whether shader isolation should be enforced for a job. The enforce_isolation parameter is then stored in the amdgpu_job structure and used when flushing the VM. The enforce_isolation field of the amdgpu_job structure is set directly after the job is allocated This change allows more fine-grained control over shader isolation, making it possible to enforce isolation on a per-job basis rather than globally. This can be useful in scenarios where only certain jobs require isolation. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
- 16 Aug, 2024 7 commits
-
-
Victor Skvortsov authored
Stop waiting for the KIQ to return back when there is a reset pending. It's quite likely that the KIQ will never response. Signed-off-by:
Lazar Lijo <Lijo.Lazar@amd.com> Tested-by:
Victor Skvortsov <victor.skvortsov@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit makes enforce_isolation setting to be per GPU and per partition by adding the enforce_isolation array to the adev structure. The adev variable is set based on the global enforce_isolation module parameter during device initialization. In amdgpu_ids.c, the adev->enforce_isolation value for the current GPU is used to determine whether to enforce isolation between graphics and compute processes on that GPU. In amdgpu_ids.c, the adev->enforce_isolation value for the current GPU and partition is used to determine whether to enforce isolation between graphics and compute processes on that GPU and partition. This allows the enforce_isolation setting to be controlled individually for each GPU and each partition, which is useful in a system with multiple GPUs and partitions where different isolation settings might be desired for different GPUs and partitions. v2: fix loop in amdgpu_vmid_mgr_init() (Alex) Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
This commit introduces the emission of a cleaner shader at the end of the IB submission process. This is achieved by adding a new function pointer, `emit_cleaner_shader`, to the `amdgpu_ring_funcs` structure. If the `emit_cleaner_shader` function is set in the ring functions, it is called during the VM flush process. The cleaner shader is only emitted if the `enable_cleaner_shader` flag is set in the `amdgpu_device` structure. This allows the cleaner shader emission to be controlled on a per-device basis. By emitting a cleaner shader at the end of the IB submission, we can ensure that the VM state is properly cleaned up after each submission. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
The cleaner shader is used by the CP firmware to clean LDS and GPRs between processes on the CUs. This adds an internal API for GFX IP code to allocate and initialize the cleaner shader. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
Some chips have more than one gfxhub so check if we are a gfxhub rather than just gfxhub 0. Acked-by:
-
Alex Deucher authored
The workaround seems to cause stability issues on other SDMA 5.2.x IPs. Fixes: a03ebf11 ("drm/amdgpu/sdma5.2: Update wptr registers as well as doorbell") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3556Acked-by:
Ruijing Dong <ruijing.dong@amd.com> Signed-off-by:
-
Sunil Khatri authored
Add support for logging the registers in devcoredump buffer for vcn_v2_6. Signed-off-by:
Sunil Khatri <sunil.khatri@amd.com> Acked-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
