- 14 Oct, 2019 14 commits
-
-
Jérôme Pouiller authored
array_index_nospec() should be applied after a bound check. Fixes: 9bca45f3 ("staging: wfx: allow to send 802.11 frames") Reported-by:
kbuild test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191011164746.2518-1-Jerome.Pouiller@silabs.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
Since wfx_tx_get_raw_link_id() return an unsigned, it makes no sense to return a negative value. "15" is a better value since it is used by firmware for stations that have not yet associated link-ids. Note that this should never happens since driver set max_ap_assoc_sta to 14. Fixes: 9bca45f3 ("staging: wfx: allow to send 802.11 frames") Reported-by:
-
Wambui Karuga authored
Use the DIV_ROUND_UP macro to replace open-coded divisor calculation to improve readability. Issue found using coccinelle: @@ expression n,d; @@ ( - ((n + d - 1) / d) + DIV_ROUND_UP(n,d) | - ((n + (d - 1)) / d) + DIV_ROUND_UP(n,d) ) Signed-off-by:
Wambui Karuga <wambui.karugax@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Link: https://lore.kernel.org/r/20191013191027.6470-1-wambui.karugax@gmail.comSigned-off-by:
-
Wambui Karuga authored
Replace open-coded division calculation with the DIV_ROUND_UP helper macro for better readability. Issue found using coccinelle: @@ expression n,d; @@ ( - ((n + d - 1) / d) + DIV_ROUND_UP(n,d) | - ((n + (d - 1)) / d) + DIV_ROUND_UP(n,d) ) Signed-off-by:
-
Michael Straube authored
Comparsions evaluate to bool, explicit conversion with ternary operator is overly verbose and unnecessary, so remove it. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20191013131249.34422-2-straube.linux@gmail.comSigned-off-by:
-
Michael Straube authored
Remove braces from single statement if block to comply with kernel coding style. Reported by checkpatch. Signed-off-by:
-
Wambui Karuga authored
Remove unnecessary line-breaks in function headers to improve readability of function headers. Signed-off-by:
-
Wambui Karuga authored
Remove variables that are only used to hold and return constants and have the functions directly return the constants. Issue found by coccinelle: @@ local idexpression ret; expression e; @@ -ret = +return e; -return ret; Signed-off-by: -
Wambui Karuga authored
Remove addition of new typedef for enum cvmx_fau_op_size. Issue found by checkpatch.pl Signed-off-by:
-
Wambui Karuga authored
Removes addition of new typedef declaration for cvmx_pko_command_word0. Also replace previous instances with new union declaration. Signed-off-by:
-
Wambui Karuga authored
Remove typedef declaration for enum cvmx_fau_reg_32. Also replace its previous uses with new declaration format. Issue found by checkpatch.pl Signed-off-by:
-
Wambui Karuga authored
Remove declaration of union cvmx_helper_link_info as typedef. Also replace its previous uses with new union declaration. Issue found by checkpatch.pl Signed-off-by:
-
Wambui Karuga authored
Remove typedef declaration from struct cvmx_wqe. Also replace its previous uses with new struct declaration. Issue found by checkpatch.pl Signed-off-by:
-
Greg Kroah-Hartman authored
We want the staging driver fixes in here as well to build on and test with. Signed-off-by:
-
- 13 Oct, 2019 23 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "A few tracing fixes: - Remove lockdown from tracefs itself and moved it to the trace directory. Have the open functions there do the lockdown checks. - Fix a few races with opening an instance file and the instance being deleted (Discovered during the lockdown updates). Kept separate from the clean up code such that they can be backported to stable easier. - Clean up and consolidated the checks done when opening a trace file, as there were multiple checks that need to be done, and it did not make sense having them done in each open instance. - Fix a regression in the record mcount code. - Small hw_lat detector tracer fixes. - A trace_pipe read fix due to not initializing trace_seq" * tag 'trace-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Initialize iter->seq after zeroing in tracing_read_pipe() tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency tracing/hwlat: Report total time spent in all NMIs during the sample recordmcount: Fix nop_mcount() function tracing: Do not create tracefs files if tracefs lockdown is in effect tracing: Add locked_down checks to the open calls of files created for tracefs tracing: Add tracing_check_open_get_tr() tracing: Have trace events system open call tracing_open_generic_tr() tracing: Get trace_array reference for available_tracers files ftrace: Get a reference counter for the trace_array on filter files tracefs: Revert ccbd54ff ("tracefs: Restrict tracefs when the kernel is locked down") -
Linus Torvalds authored
Merge tag 'hwmon-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Update/fix inspur-ipsps1 and k10temp Documentation - Fix nct7904 driver - Fix HWMON_P_MIN_ALARM mask in hwmon core * tag 'hwmon-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: docs: Extend inspur-ipsps1 title underline hwmon: (nct7904) Add array fan_alarm and vsen_alarm to store the alarms in nct7904_data struct. docs: hwmon: Include 'inspur-ipsps1.rst' into docs hwmon: Fix HWMON_P_MIN_ALARM mask hwmon: (k10temp) Update documentation and add temp2_input info hwmon: (nct7904) Fix the incorrect value of vsen_mask in nct7904_data struct
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD fixes from Richard Weinberger: "Two fixes for MTD: - spi-nor: Fix for a regression in write_sr() - rawnand: Regression fix for the au1550nd driver" * tag 'fixes-for-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: au1550nd: Fix au_read_buf16() prototype mtd: spi-nor: Fix direction of the write_sr() transfer
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fix from Jens Axboe: "Single small fix for a regression in the sequence logic for linked commands" * tag 'for-linus-20191012' of git://git.kernel.dk/linux-block: io_uring: fix sequence logic for timeout requests
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-5.5a-take3' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of IIO new device support, cleanups and features for the 5.5 cycle Third version with the adis rework set dropped as better to just have a fresh version of that at some future date. The usual mixed backs of new device support being added to drivers, long term reworks continuing and little per driver cleanups and features. Also a few trivial counter subsystem tidy ups on behalf of William. Core new feature * Device label support. A long requested feature no one got around to implementing before. Allows DT based provision of a 'label' that identifies a device uniquely within a system. This differs from existing 'name' which is meant to be the part number. New device support * ingenic-adc - Support for the JZ4770 SoC ADC including bindings. * inv_mpu6050 - Add support for magnetometer in MPU925x parts. Fiddly to do as this is actually a separate device sitting inside the package, but with the master device being able to schedule reads etc. Will only run if the auxiliary bus is not in use for any other devices. Features * ad7192 - Userspace calibration controls to do zero and full scale. * st_lsm6dsx - Enable latched interrupts by default for sensors events with related clear. - Motion events and related wakeup source. This needed quite a bit of refactoring as well. Cleanups and minor features * ad7192 - sysfs ABI docs * ad7949 - Remove code to readback configuration word as driver never actually enabled it. - Fix incorrect xfer length. Not actually known to cause problems other than wasted bus usage. * adis16080 - Replace core mlock usage with local lock with more appropriate scope. * adis16130 - Remove pointless mlock usage. * adis16240 - Remove include of gpio.h as no gpio usage. * atlas-ph-sensor - Improve logical ordering of buffer predisable / postenable functions. This is part of a longer term rework Alexandru is driving towards. * bh1750 - Fix up a static compiler warning and make the code more readable. - yaml conversion of binding + MAINTAINERS entry. * bmp280 - Drop a stray newline. * cm36651 - Drop a redundant assignment * itg3200 - Alignment cleanup. * max31856 - Add missing of_node and parent references, useful to identify the device. * sc27xx_adc - Use devm_hwspin_lock_request_specific rather than local rolled version. * stm32-lptimer counter - kernel-doc warning. * stm32-timer counter - kernel-doc warning. - Alignment cleanup. * sx9500 - Improve logical ordering of buffer predisable / postenable functions. This is part of a longer term rework Alexandru is driving towards. * tcs3414 - Improve logical ordering of buffer predisable / postenable functions. This is part of a longer term rework Alexandru is driving towards. * tag 'iio-for-5.5a-take3' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (41 commits) iio: pressure: bmp280: remove stray newline iio: adc: sc27xx: Use devm_hwspin_lock_request_specific() to simplify code iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position iio: gyro: clean up indentation issue counter: stm32: clean up indentation issue iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions iio: core: Add optional symbolic label to device attributes dt-binding: iio: Add optional label property iio: gyro: adis16080: replace mlock with own lock counter: stm32-lptimer-cnt: fix a kernel-doc warning counter: stm32-timer-cnt: fix a kernel-doc warning iio: gyro: adis16130: remove mlock usage MAINTAINERS: add entry for ROHM BH1750 driver dt-bindings: iio: light: bh1750: convert bindings to yaml iio: imu: st_lsm6dsx: add motion report function and call from interrupt iio: imu: st_lsm6dsx: always enter interrupt thread iio: imu: st_lsm6dsx: add wakeup-source option iio: imu: st_lsm6dsx: add motion events iio: imu: st_lsm6dsx: move interrupt thread to core iio: imu: inv_mpu6050: add fifo support for magnetometer data ...
-
Wambui Karuga authored
Remove comparison to NULL in drivers/staging/rtl8723bs/core/rtw_ap.c:1449. Issue found by checkpatch.pl Signed-off-by:
-
Michael Hennerich authored
For the special case when fbtft_mkdirty() is called with with -1 for the y coordinate, the height is truncated by 1. This isn't required, and causes the last line to not update. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20191011112441.31003-1-alexandru.ardelean@analog.comSigned-off-by:
-
Jules Irenge authored
Place the AND logical operator at the end of the previous line; to fix warning of "Logical continuations should be on the previous line". Issue detected by checkpatch tool. Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Link: https://lore.kernel.org/r/20191012151805.17988-1-jbi.octave@gmail.comSigned-off-by:
-
Bartosz Golaszewski authored
Remove a stray newline from the probe callback. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Baolin Wang authored
Change to use devm_hwspin_lock_request_specific() to help to simplify the cleanup code for drivers requesting one hwlock. Signed-off-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
-
Alexandru Ardelean authored
The iio_triggered_buffer_{predisable,postenable} functions attach/detach the poll functions. The iio_triggered_buffer_predisable() should be called last, to detach the poll func after the devices has been suspended. The position of iio_triggered_buffer_postenable() is correct. Note this is not stable material. It's a fix in the logical model rather fixing an actual bug. These are being tidied up throughout the subsystem to allow more substantial rework that was blocked by variations in how things were done. Signed-off-by:Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Petr Mladek authored
A customer reported the following softlockup: [899688.160002] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [test.sh:16464] [899688.160002] CPU: 0 PID: 16464 Comm: test.sh Not tainted 4.12.14-6.23-azure #1 SLE12-SP4 [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] Kernel panic - not syncing: softlockup: hung tasks [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] RSP: 0018:ffffa86784d4fde8 EFLAGS: 00000257 ORIG_RAX: ffffffffffffff12 [899688.160002] RAX: ffffffff970fea00 RBX: 0000000000000001 RCX: 0000000000000000 [899688.160002] RDX: ffffffff00000001 RSI: 0000000000000080 RDI: ffffffff970fea00 [899688.160002] RBP: ffffffffffffffff R08: ffffffffffffffff R09: 0000000000000000 [899688.160002] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b59014720d8 [899688.160002] R13: ffff8b59014720c0 R14: ffff8b5901471090 R15: ffff8b5901470000 [899688.160002] tracing_read_pipe+0x336/0x3c0 [899688.160002] __vfs_read+0x26/0x140 [899688.160002] vfs_read+0x87/0x130 [899688.160002] SyS_read+0x42/0x90 [899688.160002] do_syscall_64+0x74/0x160 It caught the process in the middle of trace_access_unlock(). There is no loop. So, it must be looping in the caller tracing_read_pipe() via the "waitagain" label. Crashdump analyze uncovered that iter->seq was completely zeroed at this point, including iter->seq.seq.size. It means that print_trace_line() was never able to print anything and there was no forward progress. The culprit seems to be in the code: /* reset all but tr, trace, and overruns */ memset(&iter->seq, 0, sizeof(struct trace_iterator) - offsetof(struct trace_iterator, seq)); It was added by the commit 53d0aa77 ("ftrace: add logic to record overruns"). It was v2.6.27-rc1. It was the time when iter->seq looked like: struct trace_seq { unsigned char buffer[PAGE_SIZE]; unsigned int len; }; There was no "size" variable and zeroing was perfectly fine. The solution is to reinitialize the structure after or without zeroing. Link: http://lkml.kernel.org/r/20191011142134.11997-1-pmladek@suse.comSigned-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Srivatsa S. Bhat (VMware) authored
max_latency is intended to record the maximum ever observed hardware latency, which may occur in either part of the loop (inner/outer). So we need to also consider the outer-loop sample when updating max_latency. Link: http://lkml.kernel.org/r/157073345463.17189.18124025522664682811.stgit@srivatsa-ubuntu Fixes: e7c15cd8 ("tracing: Added hardware latency tracer") Cc: stable@vger.kernel.org Signed-off-by:
Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Signed-off-by:
-
Srivatsa S. Bhat (VMware) authored
nmi_total_ts is supposed to record the total time spent in *all* NMIs that occur on the given CPU during the (active portion of the) sampling window. However, the code seems to be overwriting this variable for each NMI, thereby only recording the time spent in the most recent NMI. Fix it by accumulating the duration instead. Link: http://lkml.kernel.org/r/157073343544.17189.13911783866738671133.stgit@srivatsa-ubuntu Fixes: 7b2c8625 ("tracing: Add NMI tracing in hwlat detector") Cc: stable@vger.kernel.org Signed-off-by:
-
Steven Rostedt (VMware) authored
The removal of the longjmp code in recordmcount.c mistakenly made the return of make_nop() being negative an exit of nop_mcount(). It should not exit the routine, but instead just not process that part of the code. By exiting with an error code, it would cause the update of recordmcount to fail some files which would fail the build if ftrace function tracing was enabled. Link: http://lkml.kernel.org/r/20191009110538.5909fec6@gandalf.local.homeReported-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by:
-
Steven Rostedt (VMware) authored
If on boot up, lockdown is activated for tracefs, don't even bother creating the files. This can also prevent instances from being created if lockdown is in effect. Link: http://lkml.kernel.org/r/CAHk-=whC6Ji=fWnjh2+eS4b15TnbsS4VPVtvBOwCy1jjEG_JHQ@mail.gmail.comSuggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
Added various checks on open tracefs calls to see if tracefs is in lockdown mode, and if so, to return -EPERM. Note, the event format files (which are basically standard on all machines) as well as the enabled_functions file (which shows what is currently being traced) are not lockde down. Perhaps they should be, but it seems counter intuitive to lockdown information to help you know if the system has been modified. Link: http://lkml.kernel.org/r/CAHk-=wj7fGPKUspr579Cii-w_y60PtRaiDgKuxVtBAMK0VNNkA@mail.gmail.comSuggested-by:
-
Steven Rostedt (VMware) authored
Currently, most files in the tracefs directory test if tracing_disabled is set. If so, it should return -ENODEV. The tracing_disabled is called when tracing is found to be broken. Originally it was done in case the ring buffer was found to be corrupted, and we wanted to prevent reading it from crashing the kernel. But it's also called if a tracing selftest fails on boot. It's a one way switch. That is, once it is triggered, tracing is disabled until reboot. As most tracefs files can also be used by instances in the tracefs directory, they need to be carefully done. Each instance has a trace_array associated to it, and when the instance is removed, the trace_array is freed. But if an instance is opened with a reference to the trace_array, then it requires looking up the trace_array to get its ref counter (as there could be a race with it being deleted and the open itself). Once it is found, a reference is added to prevent the instance from being removed (and the trace_array associated with it freed). Combine the two checks (tracing_disabled and trace_array_get()) into a single helper function. This will also make it easier to add lockdown to tracefs later. Link: http://lkml.kernel.org/r/20191011135458.7399da44@gandalf.local.homeSigned-off-by:
-
Steven Rostedt (VMware) authored
Instead of having the trace events system open call open code the taking of the trace_array descriptor (with trace_array_get()) and then calling trace_open_generic(), have it use the tracing_open_generic_tr() that does the combination of the two. This requires making tracing_open_generic_tr() global. Signed-off-by: -
Steven Rostedt (VMware) authored
As instances may have different tracers available, we need to look at the trace_array descriptor that shows the list of the available tracers for the instance. But there's a race between opening the file and an admin deleting the instance. The trace_array_get() needs to be called before accessing the trace_array. Cc: stable@vger.kernel.org Fixes: 607e2ea1 ("tracing: Set up infrastructure to allow tracers for instances") Signed-off-by:
-
Steven Rostedt (VMware) authored
The ftrace set_ftrace_filter and set_ftrace_notrace files are specific for an instance now. They need to take a reference to the instance otherwise there could be a race between accessing the files and deleting the instance. It wasn't until the :mod: caching where these file operations started referencing the trace_array directly. Cc: stable@vger.kernel.org Fixes: 673feb9d ("ftrace: Add :mod: caching infrastructure to trace_array") Signed-off-by:
-
Steven Rostedt (VMware) authored
Running the latest kernel through my "make instances" stress tests, I triggered the following bug (with KASAN and kmemleak enabled): mkdir invoked oom-killer: gfp_mask=0x40cd0(GFP_KERNEL|__GFP_COMP|__GFP_RECLAIMABLE), order=0, oom_score_adj=0 CPU: 1 PID: 2229 Comm: mkdir Not tainted 5.4.0-rc2-test #325 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014 Call Trace: dump_stack+0x64/0x8c dump_header+0x43/0x3b7 ? trace_hardirqs_on+0x48/0x4a oom_kill_process+0x68/0x2d5 out_of_memory+0x2aa/0x2d0 __alloc_pages_nodemask+0x96d/0xb67 __alloc_pages_node+0x19/0x1e alloc_slab_page+0x17/0x45 new_slab+0xd0/0x234 ___slab_alloc.constprop.86+0x18f/0x336 ? alloc_inode+0x2c/0x74 ? irq_trace+0x12/0x1e ? tracer_hardirqs_off+0x1d/0xd7 ? __slab_alloc.constprop.85+0x21/0x53 __slab_alloc.constprop.85+0x31/0x53 ? __slab_alloc.constprop.85+0x31/0x53 ? alloc_inode+0x2c/0x74 kmem_cache_alloc+0x50/0x179 ? alloc_inode+0x2c/0x74 alloc_inode+0x2c/0x74 new_inode_pseudo+0xf/0x48 new_inode+0x15/0x25 tracefs_get_inode+0x23/0x7c ? lookup_one_len+0x54/0x6c tracefs_create_file+0x53/0x11d trace_create_file+0x15/0x33 event_create_dir+0x2a3/0x34b __trace_add_new_event+0x1c/0x26 event_trace_add_tracer+0x56/0x86 trace_array_create+0x13e/0x1e1 instance_mkdir+0x8/0x17 tracefs_syscall_mkdir+0x39/0x50 ? get_dname+0x31/0x31 vfs_mkdir+0x78/0xa3 do_mkdirat+0x71/0xb0 sys_mkdir+0x19/0x1b do_fast_syscall_32+0xb0/0xed I bisected this down to the addition of the proxy_ops into tracefs for lockdown. It appears that the allocation of the proxy_ops and then freeing it in the destroy_inode callback, is causing havoc with the memory system. Reading the documentation about destroy_inode and talking with Linus about this, this is buggy and wrong. When defining the destroy_inode() method, it is expected that the destroy_inode() will also free the inode, and not just the extra allocations done in the creation of the inode. The faulty commit causes a memory leak of the inode data structure when they are deleted. Instead of allocating the proxy_ops (and then having to free it) the checks should be done by the open functions themselves, and not hack into the tracefs directory. First revert the tracefs updates for locked_down and then later we can add the locked_down checks in the kernel/trace files. Link: http://lkml.kernel.org/r/20191011135458.7399da44@gandalf.local.home Fixes: ccbd54ff ("tracefs: Restrict tracefs when the kernel is locked down") Suggested-by:
-
- 12 Oct, 2019 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 5.4-rc3. Nothing huge here. Some binder driver fixes (although it is still being discussed if these all fix the reported issues or not, so more might be coming later), some mei device ids and fixes, and a google firmware driver bugfix that fixes a regression, as well as some other tiny fixes. All have been in linux-next with no reported issues" * tag 'char-misc-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: firmware: google: increment VPD key_len properly w1: ds250x: Fix build error without CRC16 virt: vbox: fix memory leak in hgcm_call_preprocess_linaddr binder: Fix comment headers on binder_alloc_prepare_to_free() binder: prevent UAF read in print_binder_transaction_log_entry() misc: fastrpc: prevent memory leak in fastrpc_dma_buf_attach mei: avoid FW version request on Ibex Peak and earlier mei: me: add comet point (lake) LP device ids
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO driver fixes from Greg KH: "Here are some staging and IIO driver fixes for 5.4-rc3. The "biggest" thing here is a removal of the fbtft device and flexfb code as they have been abandoned by their authors and are no longer needed for that hardware. Other than that, the usual amount of staging driver and iio driver fixes for reported issues, and some speakup sysfs file documentation, which has been long awaited for. All have been in linux-next with no reported issues" * tag 'staging-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (32 commits) iio: Fix an undefied reference error in noa1305_probe iio: light: opt3001: fix mutex unlock race iio: adc: ad799x: fix probe error handling iio: light: add missing vcnl4040 of_compatible iio: light: fix vcnl4000 devicetree hooks iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller iio: adc: axp288: Override TS pin bias current for some models iio: imu: adis16400: fix memory leak iio: imu: adis16400: release allocated memory on failure iio: adc: stm32-adc: fix a race when using several adcs with dma and irq iio: adc: stm32-adc: move registers definitions iio: accel: adxl372: Perform a reset at start up iio: accel: adxl372: Fix push to buffers lost samples iio: accel: adxl372: Fix/remove limitation for FIFO samples iio: adc: hx711: fix bug in sampling of data staging: vt6655: Fix memory leak in vt6655_probe staging: exfat: Use kvzalloc() instead of kzalloc() for exfat_sb_info Staging: fbtft: fix memory leak in fbtft_framebuffer_alloc staging: speakup: document sysfs attributes staging: rtl8188eu: fix HighestRate check in odm_ARFBRefresh_8188E() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 5.4-rc3 that resolve a number of reported issues and regressions. None of these are huge, full details are in the shortlog. There's also a MAINTAINERS update that I think you might have already taken in your tree already, but git should handle that merge easily. All have been in linux-next with no reported issues" * tag 'tty-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: MAINTAINERS: kgdb: Add myself as a reviewer for kgdb/kdb tty: serial: imx: Use platform_get_irq_optional() for optional IRQs serial: fix kernel-doc warning in comments serial: 8250_omap: Fix gpio check for auto RTS/CTS serial: mctrl_gpio: Check for NULL pointer tty: serial: fsl_lpuart: Fix lpuart_flush_buffer() tty: serial: Fix PORT_LINFLEXUART definition tty: n_hdlc: fix build on SPARC serial: uartps: Fix uartps_major handling serial: uartlite: fix exit path null pointer tty: serial: linflexuart: Fix magic SysRq handling serial: sh-sci: Use platform_get_irq_optional() for optional interrupts dt-bindings: serial: sh-sci: Document r8a774b1 bindings serial/sifive: select SERIAL_EARLYCON tty: serial: rda: Fix the link time qualifier of 'rda_uart_exit()' tty: serial: owl: Fix the link time qualifier of 'owl_uart_exit()'
-
