- 22 Feb, 2018 21 commits
-
-
Alexey Kardashevskiy authored
commit 62e984dd upstream. Radix guests do normally invalidate process-scoped translations when a new pid is allocated but migrated guests do not invalidate these so migrated guests crash sometime, especially easy to reproduce with migration happening within first 10 seconds after the guest boot start on the same machine. This adds the "Invalidate process-scoped translations" flush to fix radix guests migration. Fixes: 2ee13be3 ("KVM: PPC: Book3S HV: Update kvmppc_set_arch_compat() for ISA v3.00") Cc: stable@vger.kernel.org # v4.10+ Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by:
Laurent Vivier <lvivier@redhat.com> Tested-by:
Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nathan Fontenot authored
commit 1d9a0907 upstream. When DLPAR removing a CPU, the unmapping of the cpu from a node in unmap_cpu_from_node() should also invalidate the CPUs entry in the numa_cpu_lookup_table. There is not a guarantee that on a subsequent DLPAR add of the CPU the associativity will be the same and thus could be in a different node. Invalidating the entry in the numa_cpu_lookup_table causes the associativity to be read from the device tree at the time of the add. The current behavior of not invalidating the CPUs entry in the numa_cpu_lookup_table can result in scenarios where the the topology layout of CPUs in the partition does not match the device tree or the topology reported by the HMC. This bug looks like it was introduced in 2004 in the commit titled "ppc64: cpu hotplug notifier for numa", which is 6b15e4e87e32 in the linux-fullhist tree. Hence tag it for all stable releases. Cc: stable@vger.kernel.org Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Reviewed-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
-
Mahesh Salgaonkar authored
commit 8d81296c upstream. radix__flush_tlb_all() is called only in kexec path in real mode and any tracepoints at this stage will make kexec to fail if enabled. To verify enable tlbie trace before kexec. $ echo 1 > /sys/kernel/debug/tracing/events/powerpc/tlbie/enable == kexec into new kernel and kexec fails. Fix this by not calling trace_tlbie from radix__flush_tlb_all(). Fixes: 0428491c ("powerpc/mm: Trace tlbie(l) instructions") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Gang He authored
commit ff26cc10 upstream. If we can't get inode lock immediately in the function ocfs2_inode_lock_with_page() when reading a page, we should not return directly here, since this will lead to a softlockup problem when the kernel is configured with CONFIG_PREEMPT is not set. The method is to get a blocking lock and immediately unlock before returning, this can avoid CPU resource waste due to lots of retries, and benefits fairness in getting lock among multiple nodes, increase efficiency in case modifying the same file frequently from multiple nodes. The softlockup crash (when set /proc/sys/kernel/softlockup_panic to 1) looks like: Kernel panic - not syncing: softlockup: hung tasks CPU: 0 PID: 885 Comm: multi_mmap Tainted: G L 4.12.14-6.1-default #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <IRQ> dump_stack+0x5c/0x82 panic+0xd5/0x21e watchdog_timer_fn+0x208/0x210 __hrtimer_run_queues+0xcc/0x200 hrtimer_interrupt+0xa6/0x1f0 smp_apic_timer_interrupt+0x34/0x50 apic_timer_interrupt+0x96/0xa0 </IRQ> RIP: 0010:unlock_page+0x17/0x30 RSP: 0000:ffffaf154080bc88 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10 RAX: dead000000000100 RBX: fffff21e009f5300 RCX: 0000000000000004 RDX: dead0000000000ff RSI: 0000000000000202 RDI: fffff21e009f5300 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffaf154080bb00 R10: ffffaf154080bc30 R11: 0000000000000040 R12: ffff993749a39518 R13: 0000000000000000 R14: fffff21e009f5300 R15: fffff21e009f5300 ocfs2_inode_lock_with_page+0x25/0x30 [ocfs2] ocfs2_readpage+0x41/0x2d0 [ocfs2] filemap_fault+0x12b/0x5c0 ocfs2_fault+0x29/0xb0 [ocfs2] __do_fault+0x1a/0xa0 __handle_mm_fault+0xbe8/0x1090 handle_mm_fault+0xaa/0x1f0 __do_page_fault+0x235/0x4b0 trace_do_page_fault+0x3c/0x110 async_page_fault+0x28/0x30 RIP: 0033:0x7fa75ded638e RSP: 002b:00007ffd6657db18 EFLAGS: 00010287 RAX: 000055c7662fb700 RBX: 0000000000000001 RCX: 000055c7662fb700 RDX: 0000000000001770 RSI: 00007fa75e909000 RDI: 000055c7662fb700 RBP: 0000000000000003 R08: 000000000000000e R09: 0000000000000000 R10: 0000000000000483 R11: 00007fa75ded61b0 R12: 00007fa75e90a770 R13: 000000000000000e R14: 0000000000001770 R15: 0000000000000000 About performance improvement, we can see the testing time is reduced, and CPU utilization decreases, the detailed data is as follows. I ran multi_mmap test case in ocfs2-test package in a three nodes cluster. Before applying this patch: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2754 ocfs2te+ 20 0 170248 6980 4856 D 80.73 0.341 0:18.71 multi_mmap 1505 root rt 0 222236 123060 97224 S 2.658 6.015 0:01.44 corosync 5 root 20 0 0 0 0 S 1.329 0.000 0:00.19 kworker/u8:0 95 root 20 0 0 0 0 S 1.329 0.000 0:00.25 kworker/u8:1 2728 root 20 0 0 0 0 S 0.997 0.000 0:00.24 jbd2/sda1-33 2721 root 20 0 0 0 0 S 0.664 0.000 0:00.07 ocfs2dc-3C8CFD4 2750 ocfs2te+ 20 0 142976 4652 3532 S 0.664 0.227 0:00.28 mpirun ocfs2test@tb-node2:~>multiple_run.sh -i ens3 -k ~/linux-4.4.21-69.tar.gz -o ~/ocfs2mullog -C hacluster -s pcmk -n tb-node2,tb-node1,tb-node3 -d /dev/sda1 -b 4096 -c 32768 -t multi_mmap /mnt/shared Tests with "-b 4096 -C 32768" Thu Dec 28 14:44:52 CST 2017 multi_mmap..................................................Passed. Runtime 783 seconds. After apply this patch: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2508 ocfs2te+ 20 0 170248 6804 4680 R 54.00 0.333 0:55.37 multi_mmap 155 root 20 0 0 0 0 S 2.667 0.000 0:01.20 kworker/u8:3 95 root 20 0 0 0 0 S 2.000 0.000 0:01.58 kworker/u8:1 2504 ocfs2te+ 20 0 142976 4604 3480 R 1.667 0.225 0:01.65 mpirun 5 root 20 0 0 0 0 S 1.000 0.000 0:01.36 kworker/u8:0 2482 root 20 0 0 0 0 S 1.000 0.000 0:00.86 jbd2/sda1-33 299 root 0 -20 0 0 0 S 0.333 0.000 0:00.13 kworker/2:1H 335 root 0 -20 0 0 0 S 0.333 0.000 0:00.17 kworker/1:1H 535 root 20 0 12140 7268 1456 S 0.333 0.355 0:00.34 haveged 1282 root rt 0 222284 123108 97224 S 0.333 6.017 0:01.33 corosync ocfs2test@tb-node2:~>multiple_run.sh -i ens3 -k ~/linux-4.4.21-69.tar.gz -o ~/ocfs2mullog -C hacluster -s pcmk -n tb-node2,tb-node1,tb-node3 -d /dev/sda1 -b 4096 -c 32768 -t multi_mmap /mnt/shared Tests with "-b 4096 -C 32768" Thu Dec 28 15:04:12 CST 2017 multi_mmap..................................................Passed. Runtime 487 seconds. Link: http://lkml.kernel.org/r/1514447305-30814-1-git-send-email-ghe@suse.com Fixes: 1cce4df0 ("ocfs2: do not lock/unlock() inode DLM lock") Signed-off-by:
Gang He <ghe@suse.com> Reviewed-by:
Eric Ren <zren@suse.com> Acked-by:
alex chen <alex.chen@huawei.com> Acked-by:
piaojun <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Brian Norris authored
commit a64e7a79 upstream. Commit b014e96d ("PCI: Protect pci_error_handlers->reset_notify() usage with device_lock()") resolves races between driver reset and removal, but it introduces some new deadlock problems. If we see a timeout while we've already started suspending, removing, or shutting down the driver, we might see: (a) a worker thread, running mwifiex_pcie_work() -> mwifiex_pcie_card_reset_work() -> pci_reset_function() (b) a removal thread, running mwifiex_pcie_remove() -> mwifiex_free_adapter() -> mwifiex_unregister() -> mwifiex_cleanup_pcie() -> cancel_work_sync(&card->work) Unfortunately, mwifiex_pcie_remove() already holds the device lock that pci_reset_function() is now requesting, and so we see a deadlock. It's necessary to cancel and synchronize our outstanding work before tearing down the driver, so we can't have this work wait indefinitely for the lock. It's reasonable to only "try" to reset here, since this will mostly happen for cases where it's already difficult to reset the firmware anyway (e.g., while we're suspending or powering off the system). And if reset *really* needs to happen, we can always try again later. Fixes: b014e96d ("PCI: Protect pci_error_handlers->reset_notify() usage with device_lock()") Cc: <stable@vger.kernel.org> Cc: Xinming Hu <huxm@marvell.com> Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Bjorn Andersson authored
commit d1bf2d30 upstream. Propagate the error of devfreq_add_device() in devm_devfreq_add_device() rather than statically returning ENOMEM. This makes it slightly faster to pinpoint the cause of a returned error. Fixes: 8cd84092 ("PM / devfreq: Add resource-managed function for devfreq device") Cc: stable@vger.kernel.org Acked-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by:
-
Christian König authored
commit d0bc0c2a upstream. TTM tries to allocate coherent memory in chunks of 2MB first to improve TLB efficiency and falls back to allocating 4K pages if that fails. Suppress the warning when the 2MB allocations fails since there is a valid fall back path. Signed-off-by:
Christian König <christian.koenig@amd.com> Reported-by:
Mike Galbraith <efault@gmx.de> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Bug: https://bugs.freedesktop.org/show_bug.cgi?id=104082Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Shilpasri G Bhat authored
commit 3fa4680b upstream. Some OpenPOWER boxes can have same pstate values for nominal and pmin pstates. In these boxes the current code will not initialize 'powernv_pstate_info.min' variable and result in erroneous CPU frequency reporting. This patch fixes this problem. Fixes: 09ca4c9b (cpufreq: powernv: Replacing pstate_id with frequency table index) Reported-by:
Alvin Wang <wangat@tw.ibm.com> Signed-off-by:
Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.8+ <stable@vger.kernel.org> # 4.8+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Bart Van Assche authored
commit bb3ffb7a upstream. rxe_qp_cleanup() can sleep so it must be run in thread context and not in atomic context. This patch avoids that the following bug is triggered: Kernel BUG at 00000000560033f3 [verbose debug info unavailable] BUG: sleeping function called from invalid context at net/core/sock.c:2761 in_atomic(): 1, irqs_disabled(): 0, pid: 7, name: ksoftirqd/0 INFO: lockdep is turned off. Preemption disabled at: [<00000000b6e69628>] __do_softirq+0x4e/0x540 CPU: 0 PID: 7 Comm: ksoftirqd/0 Not tainted 4.15.0-rc7-dbg+ #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0x85/0xbf ___might_sleep+0x177/0x260 lock_sock_nested+0x1d/0x90 inet_shutdown+0x2e/0xd0 rxe_qp_cleanup+0x107/0x140 [rdma_rxe] rxe_elem_release+0x18/0x80 [rdma_rxe] rxe_requester+0x1cf/0x11b0 [rdma_rxe] rxe_do_task+0x78/0xf0 [rdma_rxe] tasklet_action+0x99/0x270 __do_softirq+0xc0/0x540 run_ksoftirqd+0x1c/0x70 smpboot_thread_fn+0x1be/0x270 kthread+0x117/0x130 ret_from_fork+0x24/0x30 Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Moni Shoua <monis@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Bart Van Assche authored
commit 65567e41 upstream. The rxe driver works as follows: * The send queue, receive queue and completion queues are implemented as circular buffers. * ib_post_send() and ib_post_recv() calls are serialized through a spinlock. * Removing elements from various queues happens from tasklet context. Tasklets are guaranteed to run on at most one CPU. This serializes access to these queues. See also rxe_completer(), rxe_requester() and rxe_responder(). * rxe_completer() processes the skbs queued onto qp->resp_pkts. * rxe_requester() handles the send queue (qp->sq.queue). * rxe_responder() processes the skbs queued onto qp->req_pkts. Since rxe_drain_req_pkts() processes qp->req_pkts, calling rxe_drain_req_pkts() from rxe_requester() is racy. Hence this patch. Reported-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Bart Van Assche authored
commit 6f301e06 upstream. The following sequence: * Change queue pair state into IB_QPS_ERR. * Post a work request on the queue pair. Triggers the following race condition in the rdma_rxe driver: * rxe_qp_error() triggers an asynchronous call of rxe_completer(), the function that examines the QP send queue. * rxe_post_send() posts a work request on the QP send queue. If rxe_completer() runs prior to rxe_post_send(), it will drain the send queue and the driver will assume no further action is necessary. However, once we post the send to the send queue, because the queue is in error, no send completion will ever happen and the send will get stuck. In order to process the send, we need to make sure that rxe_completer() gets run after a send is posted to a queue pair in an error state. This patch ensures that happens. Signed-off-by:
-
Arnd Bergmann authored
commit 4c1baad2 upstream. Running the compaction_test sometimes results in out-of-memory failures. When I debugged this, it turned out that the code to reset the number of hugepages to the initial value is simply broken since we write into an open sysctl file descriptor multiple times without seeking back to the start. Adding the lseek here fixes the problem. Cc: stable@vger.kernel.org Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://bugs.linaro.org/show_bug.cgi?id=3145Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Anders Roxell authored
commit 912ec316 upstream. aarch64-linux-gnu-gcc -Wl,-no-as-needed -Wall -lpthread seccomp_bpf.c -o seccomp_bpf seccomp_bpf.c: In function 'tracer_ptrace': seccomp_bpf.c:1720:12: error: '__NR_open' undeclared (first use in this function) if (nr == __NR_open) ^~~~~~~~~ seccomp_bpf.c:1720:12: note: each undeclared identifier is reported only once for each function it appears in In file included from seccomp_bpf.c:48:0: seccomp_bpf.c: In function 'TRACE_syscall_ptrace_syscall_dropped': seccomp_bpf.c:1795:39: error: '__NR_open' undeclared (first use in this function) EXPECT_SYSCALL_RETURN(EPERM, syscall(__NR_open)); ^ open(2) is a legacy syscall, replaced with openat(2) since 2.6.16. Thus new architectures in the kernel, such as arm64, don't implement these legacy syscalls. Fixes: a33b2d03 ("selftests/seccomp: Add tests for basic ptrace actions") Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Tested-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Michael J. Ruhl authored
commit 2ff124d5 upstream. The ev_file is an optional parameter for CQ creation. If the parameter is not passed, the ev_file pointer will be NULL. Using that pointer to set the cq_context will result in an OOPs. Verify that ev_file is not NULL before using. Cc: <stable@vger.kernel.org> # 4.14.x Fixes: 9ee79fce ("IB/core: Add completion queue (cq) object actions") Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Bodong Wang authored
commit cd2a6e7d upstream. The change of slid from u16 to u32 results in sizeof(struct ib_wc) cross 64B boundary, which causes more cache misses. This patch rearranges the fields and remain the size to 64B. Pahole output before this change: struct ib_wc { union { u64 wr_id; /* 8 */ struct ib_cqe * wr_cqe; /* 8 */ }; /* 0 8 */ enum ib_wc_status status; /* 8 4 */ enum ib_wc_opcode opcode; /* 12 4 */ u32 vendor_err; /* 16 4 */ u32 byte_len; /* 20 4 */ struct ib_qp * qp; /* 24 8 */ union { __be32 imm_data; /* 4 */ u32 invalidate_rkey; /* 4 */ } ex; /* 32 4 */ u32 src_qp; /* 36 4 */ int wc_flags; /* 40 4 */ u16 pkey_index; /* 44 2 */ /* XXX 2 bytes hole, try to pack */ u32 slid; /* 48 4 */ u8 sl; /* 52 1 */ u8 dlid_path_bits; /* 53 1 */ u8 port_num; /* 54 1 */ u8 smac[6]; /* 55 6 */ /* XXX 1 byte hole, try to pack */ u16 vlan_id; /* 62 2 */ /* --- cacheline 1 boundary (64 bytes) --- */ u8 network_hdr_type; /* 64 1 */ /* size: 72, cachelines: 2, members: 17 */ /* sum members: 62, holes: 2, sum holes: 3 */ /* padding: 7 */ /* last cacheline: 8 bytes */ }; Pahole output after this change: struct ib_wc { union { u64 wr_id; /* 8 */ struct ib_cqe * wr_cqe; /* 8 */ }; /* 0 8 */ enum ib_wc_status status; /* 8 4 */ enum ib_wc_opcode opcode; /* 12 4 */ u32 vendor_err; /* 16 4 */ u32 byte_len; /* 20 4 */ struct ib_qp * qp; /* 24 8 */ union { __be32 imm_data; /* 4 */ u32 invalidate_rkey; /* 4 */ } ex; /* 32 4 */ u32 src_qp; /* 36 4 */ u32 slid; /* 40 4 */ int wc_flags; /* 44 4 */ u16 pkey_index; /* 48 2 */ u8 sl; /* 50 1 */ u8 dlid_path_bits; /* 51 1 */ u8 port_num; /* 52 1 */ u8 smac[6]; /* 53 6 */ /* XXX 1 byte hole, try to pack */ u16 vlan_id; /* 60 2 */ u8 network_hdr_type; /* 62 1 */ /* size: 64, cachelines: 1, members: 17 */ /* sum members: 62, holes: 1, sum holes: 1 */ /* padding: 1 */ }; Fixes: 7db20ecd ("IB/core: Change wc.slid from 16 to 32 bits") Signed-off-by:
Bodong Wang <bodong@mellanox.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
Bart Van Assche authored
commit 02ee9da3 upstream. Eliminate the WARN_ONs that create following two warnings when registering an rxe device: WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/device.c:449 ib_register_device+0x591/0x640 [ib_core] CPU: 2 PID: 1005 Comm: run_tests Not tainted 4.15.0-rc4-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ib_register_device+0x591/0x640 [ib_core] Call Trace: rxe_register_device+0x3c6/0x470 [rdma_rxe] rxe_add+0x543/0x5e0 [rdma_rxe] rxe_net_add+0x37/0xb0 [rdma_rxe] rxe_param_set_add+0x5a/0x120 [rdma_rxe] param_attr_store+0x5e/0xc0 module_attr_store+0x19/0x30 sysfs_kf_write+0x3d/0x50 kernfs_fop_write+0x116/0x1a0 __vfs_write+0x23/0x120 vfs_write+0xbe/0x1b0 SyS_write+0x44/0xa0 entry_SYSCALL_64_fastpath+0x23/0x9a WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/sysfs.c:1279 ib_device_register_sysfs+0x11d/0x160 [ib_core] CPU: 2 PID: 1005 Comm: run_tests Tainted: G W 4.15.0-rc4-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ib_device_register_sysfs+0x11d/0x160 [ib_core] Call Trace: ib_register_device+0x3f7/0x640 [ib_core] rxe_register_device+0x3c6/0x470 [rdma_rxe] rxe_add+0x543/0x5e0 [rdma_rxe] rxe_net_add+0x37/0xb0 [rdma_rxe] rxe_param_set_add+0x5a/0x120 [rdma_rxe] param_attr_store+0x5e/0xc0 module_attr_store+0x19/0x30 sysfs_kf_write+0x3d/0x50 kernfs_fop_write+0x116/0x1a0 __vfs_write+0x23/0x120 vfs_write+0xbe/0x1b0 SyS_write+0x44/0xa0 entry_SYSCALL_64_fastpath+0x23/0x9a The code should accept either a parent pointer or a fully specified DMA specification without producing warnings. Fixes: 99db9494 ("IB/core: Remove ib_device.dma_device") Signed-off-by:
-
Jack Morgenstein authored
commit 852f6927 upstream. Allocating steerable UD QPs depends on having at least one IB port, while releasing those QPs does not. As a result, when there are only ETH ports, the IB (RoCE) driver requests releasing a qp range whose base qp is zero, with qp count zero. When SR-IOV is enabled, and the VF driver is running on a VM over a hypervisor which treats such qp release calls as errors (rather than NOPs), we see lines in the VM message log like: mlx4_core 0002:00:02.0: Failed to release qp range base:0 cnt:0 Fix this by adding a check for a zero count in mlx4_release_qp_range() (which thus treats releasing 0 qps as a nop), and eliminating the check for device managed flow steering when releasing steerable UD QPs. (Freeing ib_uc_qpns_bitmap unconditionally is also OK, since it remains NULL when steerable UD QPs are not allocated). Fixes: 4196670b ("IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Mike Marciniszyn authored
commit 87b3524c upstream. This failure exists with qib: ver_rc_compare_swap: mismatch, sequence 2, expected 123456789abcdef, got 0 The request builder was using the incorrect inlines to build the request header resulting in incorrect data in the atomic header. Fix by using the appropriate inlines to create the request. Fixes: 261a4351 ("IB/qib,IB/hfi: Use core common header file") Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
-
Jack Morgenstein authored
commit f23a5350 upstream. The ib_write_umad() is protected by taking the umad file mutex. However, it accesses file->port->ib_dev -- which is protected only by the port's mutex (field file_mutex). The ib_umad_remove_one() calls ib_umad_kill_port() which sets port->ib_dev to NULL under the port mutex (NOT the file mutex). It then sets the mad agent to "dead" under the umad file mutex. This is a race condition -- because there is a window where port->ib_dev is NULL, while the agent is not "dead". As a result, we saw stack traces like: [16490.678059] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0 [16490.678246] IP: ib_umad_write+0x29c/0xa3a [ib_umad] [16490.678333] PGD 0 P4D 0 [16490.678404] Oops: 0000 [#1] SMP PTI [16490.678466] Modules linked in: rdma_ucm(OE) ib_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_uverbs(OE) ib_umad(OE) mlx4_en(OE) ptp pps_core mlx4_ib(OE-) ib_core(OE) mlx4_core(OE) mlx_compat (OE) memtrack(OE) devlink mst_pciconf(OE) mst_pci(OE) netconsole nfsv3 nfs_acl nfs lockd grace fscache cfg80211 rfkill esp6_offload esp6 esp4_offload esp4 sunrpc kvm_intel kvm ppdev parport_pc irqbypass parport joydev i2c_piix4 virtio_balloon cirrus drm_kms_helper ttm drm e1000 serio_raw virtio_pci virtio_ring virtio ata_generic pata_acpi qemu_fw_cfg [last unloaded: mlxfw] [16490.679202] CPU: 4 PID: 3115 Comm: sminfo Tainted: G OE 4.14.13-300.fc27.x86_64 #1 [16490.679339] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [16490.679477] task: ffff9cf753890000 task.stack: ffffaf70c26b0000 [16490.679571] RIP: 0010:ib_umad_write+0x29c/0xa3a [ib_umad] [16490.679664] RSP: 0018:ffffaf70c26b3d90 EFLAGS: 00010202 [16490.679747] RAX: 0000000000000010 RBX: ffff9cf75610fd80 RCX: 0000000000000000 [16490.679856] RDX: 0000000000000001 RSI: 00007ffdf2bfd714 RDI: ffff9cf6bb2a9c00 In the above trace, ib_umad_write is trying to dereference the NULL file->port->ib_dev pointer. Fix this by using the agent's device pointer (the device field in struct ib_mad_agent) -- which IS protected by the umad file mutex. Fixes: 44c58487 ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types") Signed-off-by:
-
Steffen Weber authored
commit dc2db1dc upstream. If CONFIG_SCSI_SMARTPQI=y then don't build this driver as a module. Signed-off-by:
Steffen Weber <steffen.weber@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Randy Dunlap authored
commit 68e76e03 upstream. I regularly get 50 MB - 60 MB files during kernel randconfig builds. These large files mostly contain (many repeats of; e.g., 124,594): In file included from ../include/linux/string.h:6:0, from ../include/linux/uuid.h:20, from ../include/linux/mod_devicetable.h:13, from ../scripts/mod/devicetable-offsets.c:3: ../include/linux/compiler.h:64:4: warning: '______f' is static but declared in inline function 'strcpy' which is not static [enabled by default] ______f = { \ ^ ../include/linux/compiler.h:56:23: note: in expansion of macro '__trace_if' ^ ../include/linux/string.h:425:2: note: in expansion of macro 'if' if (p_size == (size_t)-1 && q_size == (size_t)-1) ^ This only happens when CONFIG_FORTIFY_SOURCE=y and CONFIG_PROFILE_ALL_BRANCHES=y, so prevent PROFILE_ALL_BRANCHES if FORTIFY_SOURCE=y. Link: http://lkml.kernel.org/r/9199446b-a141-c0c3-9678-a3f9107f2750@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
- 16 Feb, 2018 19 commits
-
-
Greg Kroah-Hartman authored
-
Uma Krishnan authored
commit 96cf727f upstream. In the event of a command failure, cxlflash returns the failure to the upper layers to process. After processing the error, when the command is queued again, the private command structure will not be zeroed and the ioasc could be stale. Per the SISLite specification, the AFU only sets the ioasc in the presence of a failure. Thus, even though the original command succeeds the second time, the command is considered a failure due to stale ioasc. This cycle repeats indefinitely and can cause a hang or IO failure. To fix the issue, clear the ioasc before queuing any command. [mkp: added Cc: stable per request] Fixes: 479ad8e9 ("scsi: cxlflash: Remove zeroing of private command data") Signed-off-by:
Uma Krishnan <ukrishn@linux.vnet.ibm.com> Acked-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
-
James Smart authored
commit e4b9794e upstream. In test cases where an instance of the driver is detached and reattached, the driver will crash on reattachment. There is a compound if statement that will skip over the bar setup if the pci_resource_start call is not successful. The driver erroneously returns success to its bar setup in this scenario even though the bars aren't properly configured. Rework the offending code segment for proper initialization steps. If the pci_resource_start call fails, -ENOMEM is now returned. Sample stack: rport-5:0-10: blocked FC remote port time out: removing rport BUG: unable to handle kernel NULL pointer dereference at (null) ... lpfc_sli4_wait_bmbx_ready+0x32/0x70 [lpfc] ... ... RIP: 0010:... ... lpfc_sli4_wait_bmbx_ready+0x32/0x70 [lpfc] Call Trace: ... lpfc_sli4_post_sync_mbox+0x106/0x4d0 [lpfc] ... ? __alloc_pages_nodemask+0x176/0x420 ... ? __kmalloc+0x2e/0x230 ... lpfc_sli_issue_mbox_s4+0x533/0x720 [lpfc] ... ? mempool_alloc+0x69/0x170 ... ? dma_generic_alloc_coherent+0x8f/0x140 ... lpfc_sli_issue_mbox+0xf/0x20 [lpfc] ... lpfc_sli4_driver_resource_setup+0xa6f/0x1130 [lpfc] ... ? lpfc_pci_probe_one+0x23e/0x16f0 [lpfc] ... lpfc_pci_probe_one+0x445/0x16f0 [lpfc] ... local_pci_probe+0x45/0xa0 ... work_for_cpu_fn+0x14/0x20 ... process_one_work+0x17a/0x440 Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Paul E. McKenney authored
commit 156baec3 upstream. Use of init_rcu_head() and destroy_rcu_head() from modules results in the following build-time error with CONFIG_DEBUG_OBJECTS_RCU_HEAD=y: ERROR: "init_rcu_head" [drivers/scsi/scsi_mod.ko] undefined! ERROR: "destroy_rcu_head" [drivers/scsi/scsi_mod.ko] undefined! This commit therefore adds EXPORT_SYMBOL_GPL() for each to allow them to be used by GPL-licensed kernel modules. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Bart Van Assche authored
commit 3bd6f43f upstream. If scsi_eh_scmd_add() is called concurrently with scsi_host_queue_ready() while shost->host_blocked > 0 then it can happen that neither function wakes up the SCSI error handler. Fix this by making every function that decreases the host_busy counter wake up the error handler if necessary and by protecting the host_failed checks with the SCSI host lock. Reported-by:
Pavel Tikhomirov <ptikhomirov@virtuozzo.com> References: https://marc.info/?l=linux-kernel&m=150461610630736 Fixes: commit 74665016 ("scsi: convert host_busy to atomic_t") Signed-off-by:
Stuart Hayes <stuart.w.hayes@gmail.com> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: Stuart Hayes <stuart.w.hayes@gmail.com> Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 7b658656 upstream. __unregister_ftrace_function_probe() will incorrectly parse the glob filter because it resets the search variable that was setup by filter_parse_regex(). Al Viro reported this: After that call of filter_parse_regex() we could have func_g.search not equal to glob only if glob started with '!' or '*'. In the former case we would've buggered off with -EINVAL (not = 1). In the latter we would've set func_g.search equal to glob + 1, calculated the length of that thing in func_g.len and proceeded to reset func_g.search back to glob. Suppose the glob is e.g. *foo*. We end up with func_g.type = MATCH_MIDDLE_ONLY; func_g.len = 3; func_g.search = "*foo"; Feeding that to ftrace_match_record() will not do anything sane - we will be looking for names containing "*foo" (->len is ignored for that one). Link: http://lkml.kernel.org/r/20180127031706.GE13338@ZenIV.linux.org.uk Fixes: 3ba00929 ("ftrace: Introduce ftrace_glob structure") Reviewed-by:
Dmitry Safonov <0x7f454c46@gmail.com> Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
Eric Biggers authored
commit c9cc8d01 upstream. If devpts_ptmx_path() returns an error code, then devpts_mntget() dereferences an ERR_PTR(): BUG: unable to handle kernel paging request at fffffffffffffff5 IP: devpts_mntget+0x13f/0x280 fs/devpts/inode.c:173 Fix it by returning early in the error paths. Reproducer: #define _GNU_SOURCE #include <fcntl.h> #include <sched.h> #include <sys/ioctl.h> #define TIOCGPTPEER _IO('T', 0x41) int main() { for (;;) { int fd = open("/dev/ptmx", 0); unshare(CLONE_NEWNS); ioctl(fd, TIOCGPTPEER, 0); } } Fixes: 311fc65c ("pty: Repair TIOCGPTPEER") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric W. Biederman authored
commit 6ac1dc73 upstream. Setting si_code to 0 is the same a setting si_code to SI_USER which is definitely not correct. With si_code set to SI_USER si_pid and si_uid will be copied to userspace instead of si_addr. Which is very wrong. So fix this by using a sensible si_code (SEGV_MAPERR) for this failure. Fixes: b920de1b ("mn10300: add the MN10300/AM33 architecture to the kernel") Cc: David Howells <dhowells@redhat.com> Cc: Masakazu Urade <urade.masakazu@jp.panasonic.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Amir Goldstein authored
commit a5a927a7 upstream. The optimization in ovl_cache_get_impure() that tries to remove an unneeded "impure" xattr needs to take mnt_want_write() on upper fs. Fixes: 4edb83bb ("ovl: constant d_ino for non-merge dirs") Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Amir Goldstein authored
commit d796e77f upstream. As a writable mount, it is not expected for overlayfs to return EINVAL/EROFS for fsync, even if dir/file is not changed. This commit fixes the case of fsync of directory, which is easier to address, because overlayfs already implements fsync file operation for directories. The problem reported by Raphael is that new PostgreSQL 10.0 with a database in overlayfs where lower layer in squashfs fails to start. The failure is due to fsync error, when PostgreSQL does fsync on all existing db directories on startup and a specific directory exists lower layer with no changes. Reported-by:
Raphael Hertzog <raphael@ouaza.com> Signed-off-by:
Raphaël Hertzog <hertzog@debian.org> Signed-off-by:
-
Toshi Kani authored
commit 23fbd7c7 upstream. A NULL pointer reference kernel bug was observed when acpi_nfit_add_dimm() called in acpi_nfit_register_dimms() failed. This error path does not set nfit_mem->nvdimm, but the 2nd list_for_each_entry() loop in the function assumes it's always set. Add a check to nfit_mem->nvdimm. Fixes: ba9c8dd3 ("acpi, nfit: add dimm device notification support") Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 43cdd1b7 upstream. There's no need to be printing a raw kernel pointer to the kernel log at every boot. So just remove it, and change the whole message to use the correct dev_info() call at the same time. Reported-by:
Wang Qize <wang_qize@venustech.com.cn> Signed-off-by:
-
Imre Deak authored
commit 5643205c upstream. We store a SW state of the t11_t12 timing in 100usec units but have to program it in 100msec as required by HW. The rounding used during programming means there will be a mismatch between the SW and HW states of this value triggering a "PPS state mismatch" error. Avoid this by storing the already rounded-up value in the SW state. Note that we still calculate panel_power_cycle_delay with the finer 100usec granularity to avoid any needless waits using that version of the delay. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103903 Cc: joks <joks@linux.pl> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171129175137.2889-1-imre.deak@intel.comSigned-off-by:
-
Yan Markman authored
commit 474c5885 upstream. This patch adds Ethernet aliases in the Marvell Armada 7040 DB, 8040 DB and 8040 mcbin device trees so that the bootloader setup the MAC addresses correctly. Signed-off-by:
Yan Markman <ymarkman@marvell.com> [Antoine: commit message, small fixes] Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Peter Zijlstra authored
commit 99ce7962 upstream. Linus reported that GCC-7.3 generated a switch-table construct that confused objtool. It turns out that, in particular due to KASAN, it is possible to have unrelated .rodata usage in between the .rodata setup for the switch-table and the following indirect jump. The simple linear reverse search from the indirect jump would hit upon the KASAN .rodata usage first and fail to find a switch_table, resulting in a spurious 'sibling call with modified stack frame' warning. Fix this by creating a 'jump-stack' which we can 'unwind' during reversal, thereby skipping over much of the in-between code. This is not fool proof by any means, but is sufficient to make the known cases work. Future work would be to construct more comprehensive flow analysis code. Reported-and-tested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180208130232.GF25235@hirez.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Nikolay Borisov authored
commit f3038ee3 upstream. This function was introduced by 247e743c ("Btrfs: Use async helpers to deal with pages that have been improperly dirtied") and it didn't do any error handling then. This function might very well fail in ENOMEM situation, yet it's not handled, this could lead to inconsistent state. So let's handle the failure by setting the mapping error bit. Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Andrey Ryabinin authored
commit 42440c1f upstream. UBSAN=y fails to build with new GCC/clang: arch/x86/kernel/head64.o: In function `sanitize_boot_params': arch/x86/include/asm/bootparam_utils.h:37: undefined reference to `__ubsan_handle_type_mismatch_v1' because Clang and GCC 8 slightly changed ABI for 'type mismatch' errors. Compiler now uses new __ubsan_handle_type_mismatch_v1() function with slightly modified 'struct type_mismatch_data'. Let's add new 'struct type_mismatch_data_common' which is independent from compiler's layout of 'struct type_mismatch_data'. And make __ubsan_handle_type_mismatch[_v1]() functions transform compiler-dependent type mismatch data to our internal representation. This way, we can support both old and new compilers with minimal amount of change. Link: http://lkml.kernel.org/r/20180119152853.16806-1-aryabinin@virtuozzo.comSigned-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by:
Sodagudi Prasad <psodagud@codeaurora.org> Signed-off-by:
-
Andrew Morton authored
commit b8fe1120 upstream. A vist from the spelling fairy. Cc: David Laight <David.Laight@ACULAB.COM> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
-
Daniel Lezcano authored
commit e0aeca3d upstream. The current code hides a couple of bugs: - The global variable 'clock_event_ddata' is overwritten each time the init function is invoked. This is fixed with a kmemdup() instead of assigning the global variable. That prevents a memory corruption when several timers are defined in the DT. - The clockevent's event_handler is NULL if the time framework does not select the clockevent when registering it, this is fine but the init code generates in any case an interrupt leading to dereference this NULL pointer. The stm32 timer works with shadow registers, a mechanism to cache the registers. When a change is done in one buffered register, we need to artificially generate an event to force the timer to copy the content of the register to the shadowed register. The auto-reload register (ARR) is one of the shadowed register as well as the prescaler register (PSC), so in order to force the copy, we issue an event which in turn leads to an interrupt and the NULL dereference. This is fixed by inverting two lines where we clear the status register before enabling the update event interrupt. As this kernel crash is resulting from the combination of these two bugs, the fixes are grouped into a single patch. Tested-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by:
-
