Commit 37778088 ("bug.h: need linux/kernel.h for TAINT_WARN.") broke
all MIPS builds:

    CC      arch/mips/kernel/machine_kexec.o
  include/linux/log2.h: In function '__ilog2_u32':
  include/linux/log2.h:34:2: error: implicit declaration of function 'fls' [-Werror=implicit-function-declaration]
  include/linux/log2.h: In function '__ilog2_u64':
  include/linux/log2.h:42:2: error: implicit declaration of function 'fls64' [-Werror=implicit-function-declaration]
  ...
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Tested-by: John Crispin <blogic@openwrt.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit a7a20d10 ("sd: limit the scope of the async probe domain")
make the SCSI device probing run device discovery in it's own async
domain.

However, as a result, the partition detection was no longer synchronized
by async_synchronize_full() (which, despite the name, only synchronizes
the global async space, not all of them).  Which in turn meant that
"wait_for_device_probe()" would not wait for the SCSI partitions to be
parsed.

And "wait_for_device_probe()" was what the boot time init code relied on
for mounting the root filesystem.

Now, most people never noticed this, because not only is it
timing-dependent, but modern distributions all use initrd.  So the root
filesystem isn't actually on a disk at all.  And then before they
actually mount the final disk filesystem, they will have loaded the
scsi-wait-scan module, which not only does the expected
wait_for_device_probe(), but also does scsi_complete_async_scans().

[ Side note: scsi_complete_async_scans() had also been partially broken,
  but that was fixed in commit 43a8d39d ("fix async probe
  regression"), so that same commit a7a20d10 had actually broken
  setups even if you used scsi-wait-scan explicitly ]

Solve this problem by just moving the scsi_complete_async_scans() call
into wait_for_device_probe().  Everybody who wants to wait for device
probing to finish really wants the SCSI probing to complete, so there's
no reason not to do this.

So now "wait_for_device_probe()" really does what the name implies, and
properly waits for device probing to finish.  This also removes the now
unnecessary extra calls to scsi_complete_async_scans().
Reported-and-tested-by: Artem S. Tashkinov <t.artem@mailcity.com>
Cc: Dan Williams <dan.j.williams@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: Borislav Petkov <bp@amd64.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SELinux regression fixes from James Morris.

Andrew Morton has a box that hit that open perms problem.

I also renamed the "epollwakeup" selinux name for the new capability to
be "block_suspend", to match the rename done by commit d9914cf6
("PM: Rename CAP_EPOLLWAKEUP to CAP_BLOCK_SUSPEND").

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  SELinux: do not check open perms if they are not known to policy
  SELinux: include definition of new capabilities

One more time/ntp fix pulled from Ingo Molnar.

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ntp: Fix STA_INS/DEL clearing bug

The VIDIOC_DV_TIMINGS_CAP ioctl check wasn't added to determine_valid_ioctls().
This caused this ioctl to always return -ENOTTY.

The cause for this was that for 3.5 two patch series were merged, one
changing V4L2 core ioctl handling and one adding new functionality, and
some of the new functionality wasn't handled by the new V4L2 core code.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[ Taking it directly due to vacations  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM SoC fixes for SPEAr from Olof Johansson:
 "These are arriving very late in the release cycle, but there has been
  a change of maintainers on the SPEAr platform and they have needed a
  while to get going.

  The patch count is higher than I would like at this point, but they're
  all relevant fixes and well-contained in their own platform code.  I
  still think it's suitable 3.5 material and I don't think it should
  increase the need for a -rc8 since they are so contained."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: SPEAr600: Fix timer interrupt definition in spear600.dtsi
  ARM: dts: SPEAr320: Boot the board in EXTENDED_MODE
  ARM: dts: SPEAr320: Fix compatible string
  Clk: SPEAr1340: Update sys clock parent array
  clk: SPEAr1340: Fix clk enable register for uart1 and i2c1.
  ARM: SPEAr13xx: Fix Interrupt bindings
  Clk:spear6xx:Fix: Rename clk ids within predefined limit
  Clk:spear3xx:Fix: Rename clk ids within predefined limit
  clk:spear1310:Fix: Rename clk ids within predefined limit
  clk:spear1340:Fix: Rename clk ids within predefined limit

Pull CIFS fixes from Steve French.

* git://git.samba.org/sfrench/cifs-2.6:
  cifs: always update the inode cache with the results from a FIND_*
  cifs: when CONFIG_HIGHMEM is set, serialize the read/write kmaps
  cifs: on CONFIG_HIGHMEM machines, limit the rsize/wsize to the kmap space
  Initialise mid_q_entry before putting it on the pending queue

Caused, AFAICS, by mismerge in commit ff9cb1c4 ("Merge branch
'for_linus' into for_linus_merged")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org  # 3.3+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-3.5-spear-fixes' of http://git.stlinux.com/spear/linux-2.6:
  ARM: SPEAr600: Fix timer interrupt definition in spear600.dtsi
  ARM: dts: SPEAr320: Boot the board in EXTENDED_MODE
  ARM: dts: SPEAr320: Fix compatible string
  Clk: SPEAr1340: Update sys clock parent array
  clk: SPEAr1340: Fix clk enable register for uart1 and i2c1.
  ARM: SPEAr13xx: Fix Interrupt bindings
  Clk:spear6xx:Fix: Rename clk ids within predefined limit
  Clk:spear3xx:Fix: Rename clk ids within predefined limit
  clk:spear1310:Fix: Rename clk ids within predefined limit
  clk:spear1340:Fix: Rename clk ids within predefined limit

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

On spear320 device supported mode are:

   * AUTO_NET_SMII_MODE
   * AUTO_NET_MII_MODE
   * AUTO_EXP_MODE
   * SMALL_PRINTERS_MODE
   * EXTENDED_MODE

spear320-evb board is designed for EXTENDED_MODE only, hence it does not
boot correctly in current form where pinctrl part for some devices fail.

Configure and boot the SPEAr320 evaluation board in EXTENDED_MODE.
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

sys_clk has multiple parents and selection of parent depends on sys_clk_ctrl
register bit no. 23:25, with following possibilities

   0XX: pll1_clk
   10X: sys_synth_clk
   110: pll2_clk
   111: pll3_clk

Out of several possibilities (h/w wise) to select same clock parent for
sys_clk, current clock implementation was considering just one value.

When bootloader programmed different (valid) value to select a clock
parent then Linux breaks.

Here, we try to include all possibilities which can lead to same
clock selection thus making Linux independent of bootloader selection
values.
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

This patch is to fix typing mistake of clk enable register of i2c1 and
uart1.
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

   - Correct interrupt bindings for uart, ethernet and pmu.
   - Added interrupt binding for keyboard.
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

The max limit of con_id is 16 and dev_id is 20. As of now for spear6xx, many clk
ids are exceeding this predefined limit.

This patch is intended to rename clk ids like:
    mux_clk -> _mclk
    gate_clk -> _gclk
    synth_clk -> syn_clk
    ras_gen1_synth_gate_clk -> ras_syn1_gclk
    pll3_48m -> pll3_
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>

The max limit of con_id is 16 and dev_id is 20. As of now for spear3xx, many clk
ids are exceeding this predefined limit.

This patch is intended to rename clk ids like:
    mux_clk -> _mclk
    gate_clk -> _gclk
    synth_clk -> syn_clk
    ras_gen1_synth_gate_clk -> ras_syn1_gclk
    ras_pll3_48m -> ras_pll3_
    pll3_48m -> pll3_
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>

The max limit of con_id is 16 and dev_id is 20. As of now for spear1310, many
clk ids are exceeding this predefined limit.

This patch is intended to rename clk ids like:
    mux_clk -> _mclk
    gate_clk -> _gclk
    synth_clk -> syn_clk
    gmac_phy -> phy_
    gmii_125m_pad -> gmii_pad
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>

The max limit of con_id is 16 and dev_id is 20. As of now for spear1340, many
clk ids are exceeding this predefined limit.

This patch rename clk ids like:
    mux_clk -> _mclk
    gate_clk -> _gclk
    synth_clk -> syn_clk
    gmac_phy -> phy_
    gmii_125m_pad_ -> gmii_pad
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>

Merge Andrew's remaining patches for 3.5:
 "Nine fixes"

* Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (9 commits)
  mm: fix lost kswapd wakeup in kswapd_stop()
  m32r: make memset() global for CONFIG_KERNEL_BZIP2=y
  m32r: add memcpy() for CONFIG_KERNEL_GZIP=y
  m32r: consistently use "suffix-$(...)"
  m32r: fix 'fix breakage from "m32r: use generic ptrace_resume code"' fallout
  m32r: fix pull clearing RESTORE_SIGMASK into block_sigmask() fallout
  m32r: remove duplicate definition of PTRACE_O_TRACESYSGOOD
  mn10300: fix "pull clearing RESTORE_SIGMASK into block_sigmask()" fallout
  bootmem: make ___alloc_bootmem_node_nopanic() really nopanic

Offlining memory may block forever, waiting for kswapd() to wake up
because kswapd() does not check the event kthread->should_stop before
sleeping.

The proper pattern, from Documentation/memory-barriers.txt, is:

   ---  waker  ---
   event_indicated = 1;
   wake_up_process(event_daemon);

   ---  sleeper  ---
   for (;;) {
      set_current_state(TASK_UNINTERRUPTIBLE);
      if (event_indicated)
         break;
      schedule();
   }

   set_current_state() may be wrapped by:
      prepare_to_wait();

In the kswapd() case, event_indicated is kthread->should_stop.

  === offlining memory (waker) ===
   kswapd_stop()
      kthread_stop()
         kthread->should_stop = 1
         wake_up_process()
         wait_for_completion()

  ===  kswapd_try_to_sleep (sleeper) ===
   kswapd_try_to_sleep()
      prepare_to_wait()
           .
           .
      schedule()
           .
           .
      finish_wait()

The schedule() needs to be protected by a test of kthread->should_stop,
which is wrapped by kthread_should_stop().

Reproducer:
   Do heavy file I/O in background.
   Do a memory offline/online in a tight loop
Signed-off-by: Aaditya Kumar <aaditya.kumar@ap.sony.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the m32r compile error:

  arch/m32r/boot/compressed/misc.c:31:14: error: static declaration of 'memset' follows non-static declaration
  make[5]: *** [arch/m32r/boot/compressed/misc.o] Error 1
  make[4]: *** [arch/m32r/boot/compressed/vmlinux] Error 2

by removing the static keyword.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the m32r link error:

    LD      arch/m32r/boot/compressed/vmlinux
  arch/m32r/boot/compressed/misc.o: In function `zlib_updatewindow':
  misc.c:(.text+0x190): undefined reference to `memcpy'
  misc.c:(.text+0x190): relocation truncated to fit: R_M32R_26_PLTREL against undefined symbol `memcpy'
  make[5]: *** [arch/m32r/boot/compressed/vmlinux] Error 1

by adding our own implementation of memcpy().
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit a556bec9 ("m32r: fix arch/m32r/boot/compressed/Makefile")
changed "$(suffix_y)" to "$(suffix-y)", but didn't update any location
where "suffix_y" is set, causing:

  make[5]: *** No rule to make target `arch/m32r/boot/compressed/vmlinux.bin.', needed by `arch/m32r/boot/compressed/piggy.o'.  Stop.
  make[4]: *** [arch/m32r/boot/compressed/vmlinux] Error 2
  make[3]: *** [zImage] Error 2

Correct the other locations to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit acdc0d5e ('m32r: fix breakage from "m32r: use generic
ptrace_resume code"') tried to fix a problem in commit e34112e3
("m32r: use generic ptrace_resume code") by returning values in a
function returning void, causing:

  arch/m32r/kernel/ptrace.c: In function 'user_enable_single_step':
  arch/m32r/kernel/ptrace.c:594:3: warning: 'return' with a value, in function returning void [enabled by default]
  arch/m32r/kernel/ptrace.c:598:3: warning: 'return' with a value, in function returning void [enabled by default]
  arch/m32r/kernel/ptrace.c:601:3: warning: 'return' with a value, in function returning void [enabled by default]
  arch/m32r/kernel/ptrace.c:604:2: warning: 'return' with a value, in function returning void [enabled by default]

Remove the unneeded return values.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit a610d6e6 ("pull clearing RESTORE_SIGMASK into
block_sigmask()") caused:

  arch/m32r/kernel/signal.c: In function 'handle_signal':
  arch/m32r/kernel/signal.c:289:6: warning: 'return' with a value, in function returning void [enabled by default]

Remove the return value it forgot to remove.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the m32r build warning:

  include/linux/ptrace.h:66:0: warning: "PTRACE_O_TRACESYSGOOD" redefined [enabled by default]
  arch/m32r/include/asm/ptrace.h:117:0: note: this is the location of the previous definition

We already have it in <linux/ptrace.h>, so remove it from <asm/ptrace.h>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit a610d6e6 ("pull clearing RESTORE_SIGMASK into
block_sigmask()") caused:

  arch/mn10300/kernel/signal.c: In function 'handle_signal':
  arch/mn10300/kernel/signal.c:462:3: warning: 'return' with no value, in function returning non-void [-Wreturn-type]

Add the missing return values, and restore the indentation while we're
at it.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In reaction to commit 99ab7b19 ("mm: sparse: fix usemap allocation
above node descriptor section") Johannes said:
| while backporting the below patch, I realised that your fix busted
| f5bf18fa again.  The problem was not a panicking version on
| allocation failure but when the usemap size was too large such that
| goal + size > limit triggers the BUG_ON in the bootmem allocator.  So
| we need a version that passes limit ONLY if the usemap is smaller than
| the section.

after checking the code, the name of ___alloc_bootmem_node_nopanic()
does not reflect the fact.

Make bootmem really not panic.

Hope will kill bootmem sooner.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>    [3.3.x, 3.4.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull a last-minute PM update from Rafael J. Wysocki:
 "This renames CAP_EPOLLWAKEUP to CAP_BLOCK_SUSPEND to encourage future
  reuse of the capability in question in related cases."

* tag 'pm-post-3.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: Rename CAP_EPOLLWAKEUP to CAP_BLOCK_SUSPEND

As discussed in
http://thread.gmane.org/gmane.linux.kernel/1249726/focus=1288990,
the capability introduced in 4d7e30d9
to govern EPOLLWAKEUP seems misnamed: this capability is about governing
the ability to suspend the system, not using a particular API flag
(EPOLLWAKEUP). We should make the name of the capability more general
to encourage reuse in related cases. (Whether or not this capability
should also be used to govern the use of /sys/power/wake_lock is a
question that needs to be separately resolved.)

This patch renames the capability to CAP_BLOCK_SUSPEND. In order to ensure
that the old capability name doesn't make it out into the wild, could you
please apply and push up the tree to ensure that it is incorporated
for the 3.5 release.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Pull networking fixes from David Miller:

 1) IPVS oops'ers:
   a) Should not reset skb->nf_bridge in forwarding hook (Lin Ming)
   b) 3.4 commit can cause ip_vs_control_cleanup to be invoked after
      the ipvs_core_ops are unregistered during rmmod (Julian ANastasov)

 2) ixgbevf bringup failure can crash in TX descriptor cleanup
    (Alexander Duyck)

 3) AX25 switch missing break statement hoses ROSE sockets (Alan Cox)

 4) CAIF accesses freed per-net memory (Sjur Brandeland)

 5) Network cgroup code has out-or-bounds accesses (Eric DUmazet), and
    accesses freed memory (Gao Feng)

 6) Fix a crash in SCTP reported by Dave Jones caused by freeing an
    association still on a list (Neil HOrman)

 7) __netdev_alloc_skb() regresses on GFP_DMA using drivers because that
    GFP flag is not being retained for the allocation (Eric Dumazet).

 8) Missing NULL hceck in sch_sfb netlink message parsing (Alan Cox)

 9) bnx2 crashes because TX index iteration is not bounded correctly
    (Michael Chan)

10) IPoIB generates warnings in TCP queue collapsing (via
    skb_try_coalesce) because it does not set skb->truesize correctly
    (Eric Dumazet)

11) vlan_info objects leak for the implicit vlan with ID 0 (Amir
    Hanania)

12) A fix for TX time stamp handling in gianfar does not transfer socket
    ownership from one packet to another correctly, resulting in a
    socket write space imbalance (Eric Dumazet)

13) Julia Lawall found several cases where we do a list iteration, and
    then at the loop termination unconditionally assume we ended up with
    real list object, rather than the list head itself (CNIC, RXRPC,
    mISDN).

14) The bonding driver handles procfs moving incorrectly when a device
    it manages is moved from one namespace to another (Eric Biederman)

15) Missing memory barriers in stmmac descriptor accesses result in
    various crashes (Deepak Sikri)

16) Fix handling of broadcast packets in batman-adv (Simon Wunderlich)

17) Properly check the sanity of sendmsg() lengths in ieee802154's
    dgram_sendmsg().  Dave Jones and others have hit and reported this
    bug (Sasha Levin)

18) Some drivers (b44 and b43legacy) on 64-bit machines stopped working
    because of how netdev_alloc_skb() was adjusted.  Such drivers should
    now use alloc_skb() for obtaining bounce buffers.  (Eric Dumazet)

19) atl1c mis-managed it's link state in that it stops the queue by hand
    on link down.  The generic networking takes care of that and this
    double stop locks the queue down.  So simply removing the driver's
    queue stop call fixes the problem (Cloud Ren)

20) Fix out-of-memory due to mis-accounting in net_em packet scheduler
    (Eric Dumazet)

21) If DCB and SR-IOV are configured at the same time in IXGBE the chip
    will hang because this is not supported (Alexander Duyck)

22) A commit to stop drivers using netdev->base_addr broke the CNIC
    driver (Michael Chan)

23) Timeout regression in ipset caused by an attempt to fix an overflow
    bug (Jozsef Kadlecsik).

24) mac80211 minstrel code allocates memory using incorrect size
    (Thomas Huehn)

25) llcp_sock_getname() needs to check for a NULL device otherwise we
    OOPS (Sasha Levin)

26) mwifiex leaks memory (Bing Zhao)

27) Propagate iwlwifi fix to iwlegacy, even when we're not associated
    we need to monitor for stuck queues in the watchdog handler
    (Stanislaw Geuszka)

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
  ipvs: fix oops in ip_vs_dst_event on rmmod
  ipvs: fix oops on NAT reply in br_nf context
  ixgbevf: Fix panic when loading driver
  ax25: Fix missing break
  MAINTAINERS: reflect actual changes in IEEE 802.15.4 maintainership
  caif: Fix access to freed pernet memory
  net: cgroup: fix access the unallocated memory in netprio cgroup
  ixgbevf: Prevent RX/TX statistics getting reset to zero
  sctp: Fix list corruption resulting from freeing an association on a list
  net: respect GFP_DMA in __netdev_alloc_skb()
  e1000e: fix test for PHY being accessible on 82577/8/9 and I217
  e1000e: Correct link check logic for 82571 serdes
  sch_sfb: Fix missing NULL check
  bnx2: Fix bug in bnx2_free_tx_skbs().
  IPoIB: fix skb truesize underestimatiom
  net: Fix memory leak - vlan_info struct
  gianfar: fix potential sk_wmem_alloc imbalance
  drivers/net/ethernet/broadcom/cnic.c: remove invalid reference to list iterator variable
  net/rxrpc/ar-peer.c: remove invalid reference to list iterator variable
  drivers/isdn/mISDN/stack.c: remove invalid reference to list iterator variable
  ...

Pull rpmsg fix from Ohad Ben-Cohen:
 "A single rpmsg fix for 3.5, coming from Federico Fuga, which
  eliminates the dependency on arbitrary initialization orders."

* tag 'single-rpmsg-3.5-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg:
  rpmsg: fix dependency on initialization order

Pull CMA and DMA-mapping fixes from Marek Szyprowski:
 "Another set of minor fixups for recently merged Contiguous Memory
  Allocator and ARM DMA-mapping changes.  Those patches fix mysterious
  crashes on systems with CMA and Himem enabled as well as some corner
  cases caused by typical off-by-one bug."

* 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma-mapping: modify condition check while freeing pages
  mm: cma: fix condition check when setting global cma area
  mm: cma: don't replace lowmem pages with highmem

Pablo Neira Ayuso says:

====================
I know that we're in fairly late stage to request pulls, but the IPVS people
pinged me with little patches with oops fixes last week.

One of them was recently introduced (during the 3.4 development cycle) while
cleaning up the IPVS netns support. They are:

* Fix one regression introduced in 3.4 while cleaning up the
  netns support for IPVS, from Julian Anastasov.

* Fix one oops triggered due to resetting the conntrack attached to the skb
  instead of just putting it in the forward hook, from Lin Ming. This problem
  seems to be there since 2.6.37 according to Simon Horman.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When rpmsg drivers are built into the kernel, they must not initialize
before the rpmsg bus does, otherwise they'd trigger a BUG() in
drivers/base/driver.c line 169 (driver_register()).

To fix that, and to stop depending on arbitrary linkage ordering of
those built-in rpmsg drivers, we make the rpmsg bus initialize at
subsys_initcall.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Federico Fuga <fuga@studiofuga.com>
[ohad: rewrite the commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>

	After commit 39f618b4 (3.4)
"ipvs: reset ipvs pointer in netns" we can oops in
ip_vs_dst_event on rmmod ip_vs because ip_vs_control_cleanup
is called after the ipvs_core_ops subsys is unregistered and
net->ipvs is NULL. Fix it by exiting early from ip_vs_dst_event
if ipvs is NULL. It is safe because all services and dests
for the net are already freed.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

IPVS should not reset skb->nf_bridge in FORWARD hook
by calling nf_reset for NAT replies. It triggers oops in
br_nf_forward_finish.

[  579.781508] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
[  579.781669] IP: [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112
[  579.781792] PGD 218f9067 PUD 0
[  579.781865] Oops: 0000 [#1] SMP
[  579.781945] CPU 0
[  579.781983] Modules linked in:
[  579.782047]
[  579.782080]
[  579.782114] Pid: 4644, comm: qemu Tainted: G        W    3.5.0-rc5-00006-g95e69f9 #282 Hewlett-Packard  /30E8
[  579.782300] RIP: 0010:[<ffffffff817b1ca5>]  [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112
[  579.782455] RSP: 0018:ffff88007b003a98  EFLAGS: 00010287
[  579.782541] RAX: 0000000000000008 RBX: ffff8800762ead00 RCX: 000000000001670a
[  579.782653] RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff8800762ead00
[  579.782845] RBP: ffff88007b003ac8 R08: 0000000000016630 R09: ffff88007b003a90
[  579.782957] R10: ffff88007b0038e8 R11: ffff88002da37540 R12: ffff88002da01a02
[  579.783066] R13: ffff88002da01a80 R14: ffff88002d83c000 R15: ffff88002d82a000
[  579.783177] FS:  0000000000000000(0000) GS:ffff88007b000000(0063) knlGS:00000000f62d1b70
[  579.783306] CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
[  579.783395] CR2: 0000000000000004 CR3: 00000000218fe000 CR4: 00000000000027f0
[  579.783505] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  579.783684] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  579.783795] Process qemu (pid: 4644, threadinfo ffff880021b20000, task ffff880021aba760)
[  579.783919] Stack:
[  579.783959]  ffff88007693cedc ffff8800762ead00 ffff88002da01a02 ffff8800762ead00
[  579.784110]  ffff88002da01a02 ffff88002da01a80 ffff88007b003b18 ffffffff817b26c7
[  579.784260]  ffff880080000000 ffffffff81ef59f0 ffff8800762ead00 ffffffff81ef58b0
[  579.784477] Call Trace:
[  579.784523]  <IRQ>
[  579.784562]
[  579.784603]  [<ffffffff817b26c7>] br_nf_forward_ip+0x275/0x2c8
[  579.784707]  [<ffffffff81704b58>] nf_iterate+0x47/0x7d
[  579.784797]  [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae
[  579.784906]  [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102
[  579.784995]  [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae
[  579.785175]  [<ffffffff8187fa95>] ? _raw_write_unlock_bh+0x19/0x1b
[  579.785179]  [<ffffffff817ac417>] __br_forward+0x97/0xa2
[  579.785179]  [<ffffffff817ad366>] br_handle_frame_finish+0x1a6/0x257
[  579.785179]  [<ffffffff817b2386>] br_nf_pre_routing_finish+0x26d/0x2cb
[  579.785179]  [<ffffffff817b2cf0>] br_nf_pre_routing+0x55d/0x5c1
[  579.785179]  [<ffffffff81704b58>] nf_iterate+0x47/0x7d
[  579.785179]  [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44
[  579.785179]  [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102
[  579.785179]  [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44
[  579.785179]  [<ffffffff81551525>] ? sky2_poll+0xb35/0xb54
[  579.785179]  [<ffffffff817ad62a>] br_handle_frame+0x213/0x229
[  579.785179]  [<ffffffff817ad417>] ? br_handle_frame_finish+0x257/0x257
[  579.785179]  [<ffffffff816e3b47>] __netif_receive_skb+0x2b4/0x3f1
[  579.785179]  [<ffffffff816e69fc>] process_backlog+0x99/0x1e2
[  579.785179]  [<ffffffff816e6800>] net_rx_action+0xdf/0x242
[  579.785179]  [<ffffffff8107e8a8>] __do_softirq+0xc1/0x1e0
[  579.785179]  [<ffffffff8135a5ba>] ? trace_hardirqs_off_thunk+0x3a/0x6c
[  579.785179]  [<ffffffff8188812c>] call_softirq+0x1c/0x30

The steps to reproduce as follow,

1. On Host1, setup brige br0(192.168.1.106)
2. Boot a kvm guest(192.168.1.105) on Host1 and start httpd
3. Start IPVS service on Host1
   ipvsadm -A -t 192.168.1.106:80 -s rr
   ipvsadm -a -t 192.168.1.106:80 -r 192.168.1.105:80 -m
4. Run apache benchmark on Host2(192.168.1.101)
   ab -n 1000 http://192.168.1.106/

ip_vs_reply4
  ip_vs_out
    handle_response
      ip_vs_notrack
        nf_reset()
        {
          skb->nf_bridge = NULL;
        }

Actually, IPVS wants in this case just to replace nfct
with untracked version. So replace the nf_reset(skb) call
in ip_vs_notrack() with a nf_conntrack_put(skb->nfct) call.
Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch addresses a kernel panic seen when setting up the interface.
Specifically we see a NULL pointer dereference on the Tx descriptor cleanup
path when enabling interrupts.  This change corrects that so it cannot
occur.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

At least there seems to be no reason to disallow ROSE sockets when
NETROM is loaded.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>