- 14 Dec, 2017 34 commits
-
-
Nicholas Piggin authored
commit 371b8044 upstream. kexec can leave MMU registers set when booting into a new kernel, the PIDR (Process Identification Register) in particular. The boot sequence does not zero PIDR, so it only gets set when CPUs first switch to a userspace processes (until then it's running a kernel thread with effective PID = 0). This leaves a window where a process table entry and page tables are set up due to user processes running on other CPUs, that happen to match with a stale PID. The CPU with that PID may cause speculative accesses that address quadrant 0 (aka userspace addresses), which will result in cached translations and PWC (Page Walk Cache) for that process, on a CPU which is not in the mm_cpumask and so they will not be invalidated properly. The most common result is the kernel hanging in infinite page fault loops soon after kexec (usually in schedule_tail, which is usually the first non-speculative quadrant 0 access to a new PID) due to a stale PWC. However being a stale translation error, it could result in anything up to security and data corruption problems. Fix this by zeroing out PIDR at boot and kexec. Fixes: 7e381c0f ("powerpc/mm/radix: Add mmu context handling callback for radix") Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Janosch Frank authored
commit ca76ec9c upstream. All skey functions call skey_check_enable at their start, which checks if we are in the PSTATE and injects a privileged operation exception if we are. Unfortunately they continue processing afterwards and perform the operation anyhow as skey_check_enable does not deliver an error if the exception injection was successful. Let's move the PSTATE check into the skey functions and exit them on such an occasion, also we now do not enable skey handling anymore in such a case. Signed-off-by:
Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Fixes: a7e19ab5 ("KVM: s390: handle missing storage-key facility") Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Reviewed-by:
Thomas Huth <thuth@redhat.com> Signed-off-by:
-
Heiko Carstens authored
commit e779498d upstream. When wiring up the socket system calls the compat entries were incorrectly set. Not all of them point to the corresponding compat wrapper functions, which clear the upper 33 bits of user space pointers, like it is required. Fixes: 977108f8 ("s390: wire up separate socketcalls system calls") Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Lai Jiangshan authored
commit 46febd37 upstream. Commit 31487f83 ("smp/cfd: Convert core to hotplug state machine") accidently put this step on the wrong place. The step should be at the cpuhp_ap_states[] rather than the cpuhp_bp_states[]. grep smpcfd /sys/devices/system/cpu/hotplug/states 40: smpcfd:prepare 129: smpcfd:dying "smpcfd:dying" was missing before. So was the invocation of the function smpcfd_dying_cpu(). Fixes: 31487f83 ("smp/cfd: Convert core to hotplug state machine") Signed-off-by:
Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lkml.kernel.org/r/20171128131954.81229-1-jiangshanlai@gmail.comSigned-off-by:
-
Robin Murphy authored
commit 29a90b70 upstream. The intel-iommu DMA ops fail to correctly handle scatterlists where sg->offset is greater than PAGE_SIZE - the IOVA allocation is computed appropriately based on the page-aligned portion of the offset, but the mapping is set up relative to sg->page, which means it fails to actually cover the whole buffer (and in the worst case doesn't cover it at all): (sg->dma_address + sg->dma_len) ----+ sg->dma_address ---------+ | iov_pfn------+ | | | | | v v v iova: a b c d e f |--------|--------|--------|--------|--------| <...calculated....> [_____mapped______] pfn: 0 1 2 3 4 5 |--------|--------|--------|--------|--------| ^ ^ ^ | | | sg->page ----+ | | sg->offset --------------+ | (sg->offset + sg->length) ----------+ As a result, the caller ends up overrunning the mapping into whatever lies beyond, which usually goes badly: [ 429.645492] DMAR: DRHD: handling fault status reg 2 [ 429.650847] DMAR: [DMA Write] Request device [02:00.4] fault addr f2682000 ... Whilst this is a fairly rare occurrence, it can happen from the result of intermediate scatterlist processing such as scatterwalk_ffwd() in the crypto layer. Whilst that particular site could be fixed up, it still seems worthwhile to bring intel-iommu in line with other DMA API implementations in handling this robustly. To that end, fix the intel_map_sg() path to line up the mapping correctly (in units of MM pages rather than VT-d pages to match the aligned_nrpages() calculation) regardless of the offset, and use sg_phys() consistently for clarity. Reported-by:
Harsh Jain <Harsh@chelsio.com> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Reviewed by: Ashok Raj <ashok.raj@intel.com> Tested by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Jaejoong Kim authored
commit 89b89d12 upstream. snd_usb_copy_string_desc() returns zero if usb_string() fails. In case of failure, we need to check the snd_usb_copy_string_desc()'s return value and add an exception case Signed-off-by:
Jaejoong Kim <climbbb.kim@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jaejoong Kim authored
commit 251552a2 upstream. The snd_usb_copy_string_desc() retrieves the usb string corresponding to the index number through the usb_string(). The problem is that the usb_string() returns the length of the string (>= 0) when successful, but it can also return a negative value about the error case or status of usb_control_msg(). If iClockSource is '0' as shown below, usb_string() will returns -EINVAL. This will result in '0' being inserted into buf[-22], and the following KASAN out-of-bound error message will be output. AudioControl Interface Descriptor: bLength 8 bDescriptorType 36 bDescriptorSubtype 10 (CLOCK_SOURCE) bClockID 1 bmAttributes 0x07 Internal programmable Clock (synced to SOF) bmControls 0x07 Clock Frequency Control (read/write) Clock Validity Control (read-only) bAssocTerminal 0 iClockSource 0 To fix it, check usb_string()'return value and bail out. ================================================================== BUG: KASAN: stack-out-of-bounds in parse_audio_unit+0x1327/0x1960 [snd_usb_audio] Write of size 1 at addr ffff88007e66735a by task systemd-udevd/18376 CPU: 0 PID: 18376 Comm: systemd-udevd Not tainted 4.13.0+ #3 Hardware name: LG Electronics 15N540-RFLGL/White Tip Mountain, BIOS 15N5 Call Trace: dump_stack+0x63/0x8d print_address_description+0x70/0x290 ? parse_audio_unit+0x1327/0x1960 [snd_usb_audio] kasan_report+0x265/0x350 __asan_store1+0x4a/0x50 parse_audio_unit+0x1327/0x1960 [snd_usb_audio] ? save_stack+0xb5/0xd0 ? save_stack_trace+0x1b/0x20 ? save_stack+0x46/0xd0 ? kasan_kmalloc+0xad/0xe0 ? kmem_cache_alloc_trace+0xff/0x230 ? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio] ? usb_audio_probe+0x4de/0xf40 [snd_usb_audio] ? usb_probe_interface+0x1f5/0x440 ? driver_probe_device+0x3ed/0x660 ? build_feature_ctl+0xb10/0xb10 [snd_usb_audio] ? save_stack_trace+0x1b/0x20 ? init_object+0x69/0xa0 ? snd_usb_find_csint_desc+0xa8/0xf0 [snd_usb_audio] snd_usb_mixer_controls+0x1dc/0x370 [snd_usb_audio] ? build_audio_procunit+0x890/0x890 [snd_usb_audio] ? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio] ? kmem_cache_alloc_trace+0xff/0x230 ? usb_ifnum_to_if+0xbd/0xf0 snd_usb_create_mixer+0x25b/0x4b0 [snd_usb_audio] ? snd_usb_create_stream+0x255/0x2c0 [snd_usb_audio] usb_audio_probe+0x4de/0xf40 [snd_usb_audio] ? snd_usb_autosuspend.part.7+0x30/0x30 [snd_usb_audio] ? __pm_runtime_idle+0x90/0x90 ? kernfs_activate+0xa6/0xc0 ? usb_match_one_id_intf+0xdc/0x130 ? __pm_runtime_set_status+0x2d4/0x450 usb_probe_interface+0x1f5/0x440 Signed-off-by:
-
Takashi Iwai authored
commit 43a35428 upstream. The use of snd_BUG_ON() in ALSA sequencer timer may lead to a spurious WARN_ON() when a slave timer is deployed as its backend and a corresponding master timer stops meanwhile. The symptom was triggered by syzkaller spontaneously. Since the NULL timer is valid there, rip off snd_BUG_ON(). Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Robb Glasser authored
commit 362bca57 upstream. When the device descriptor is closed, the `substream->runtime` pointer is freed. But another thread may be in the ioctl handler, case SNDRV_CTL_IOCTL_PCM_INFO. This case calls snd_pcm_info_user() which calls snd_pcm_info() which accesses the now freed `substream->runtime`. Note: this fixes CVE-2017-0861 Signed-off-by:
Robb Glasser <rglasser@google.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Jeff Mahoney authored
commit e19182c0 upstream. If btrfs_del_root fails in btrfs_drop_snapshot, we'll pick up the error but then return 0 anyway due to mixing err and ret. Fixes: 79787eaa ("btrfs: replace many BUG_ONs with proper error handling") Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Radim Krčmář authored
commit b1394e74 upstream. Implementation of the unpinned APIC page didn't update the VMCS address cache when invalidation was done through range mmu notifiers. This became a problem when the page notifier was removed. Re-introduce the arch-specific helper and call it from ...range_start. Reported-by:
Fabian Grünbichler <f.gruenbichler@proxmox.com> Fixes: 38b99173 ("kvm: vmx: Implement set_apic_access_page_addr") Fixes: 369ea824 ("mm/rmap: update to new mmu_notifier semantic v2") Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Tested-by:
Wanpeng Li <wanpeng.li@hotmail.com> Tested-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit ddec3bde upstream. acpi_os_get_root_pointer() may return a valid address even if acpi_disabled is set, but the host bridge information from the ACPI tables is not going to be used in that case and the Broadcom host bridge initialization should not be skipped then, So make broadcom_postcore_init() check acpi_disabled too to avoid this issue. Fixes: 6361d72b (x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan) Reported-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Eric Biggers authored
commit 54c1fb39 upstream. ->pkey_algo used to be an enum, but was changed to a string by commit 4e8ae72a ("X.509: Make algo identifiers text instead of enum"). But two comparisons were not updated. Fix them to use strcmp(). This bug broke signature verification in certain configurations, depending on whether the string constants were deduplicated or not. Fixes: 4e8ae72a ("X.509: Make algo identifiers text instead of enum") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Eric Biggers authored
commit 0f30cbea upstream. Adding a specially crafted X.509 certificate whose subjectPublicKey ASN.1 value is zero-length caused x509_extract_key_data() to set the public key size to SIZE_MAX, as it subtracted the nonexistent BIT STRING metadata byte. Then, x509_cert_parse() called kmemdup() with that bogus size, triggering the WARN_ON_ONCE() in kmalloc_slab(). This appears to be harmless, but it still must be fixed since WARNs are never supposed to be user-triggerable. Fix it by updating x509_cert_parse() to validate that the value has a BIT STRING metadata byte, and that the byte is 0 which indicates that the number of bits in the bitstring is a multiple of 8. It would be nice to handle the metadata byte in asn1_ber_decoder() instead. But that would be tricky because in the general case a BIT STRING could be implicitly tagged, and/or could legitimately have a length that is not a whole number of bytes. Here was the WARN (cleaned up slightly): WARNING: CPU: 1 PID: 202 at mm/slab_common.c:971 kmalloc_slab+0x5d/0x70 mm/slab_common.c:971 Modules linked in: CPU: 1 PID: 202 Comm: keyctl Tainted: G B 4.14.0-09238-g1d3b78bb #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 task: ffff880033014180 task.stack: ffff8800305c8000 Call Trace: __do_kmalloc mm/slab.c:3706 [inline] __kmalloc_track_caller+0x22/0x2e0 mm/slab.c:3726 kmemdup+0x17/0x40 mm/util.c:118 kmemdup include/linux/string.h:414 [inline] x509_cert_parse+0x2cb/0x620 crypto/asymmetric_keys/x509_cert_parser.c:106 x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174 asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388 key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850 SYSC_add_key security/keys/keyctl.c:122 [inline] SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0x96 Fixes: 42d5ec27 ("X.509: Add an ASN.1 decoder") Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Eric Biggers authored
commit 4dca6ea1 upstream. When the request_key() syscall is not passed a destination keyring, it links the requested key (if constructed) into the "default" request-key keyring. This should require Write permission to the keyring. However, there is actually no permission check. This can be abused to add keys to any keyring to which only Search permission is granted. This is because Search permission allows joining the keyring. keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_SESSION_KEYRING) then will set the default request-key keyring to the session keyring. Then, request_key() can be used to add keys to the keyring. Both negatively and positively instantiated keys can be added using this method. Adding negative keys is trivial. Adding a positive key is a bit trickier. It requires that either /sbin/request-key positively instantiates the key, or that another thread adds the key to the process keyring at just the right time, such that request_key() misses it initially but then finds it in construct_alloc_key(). Fix this bug by checking for Write permission to the keyring in construct_get_dest_keyring() when the default keyring is being used. We don't do the permission check for non-default keyrings because that was already done by the earlier call to lookup_user_key(). Also, request_key_and_link() is currently passed a 'struct key *' rather than a key_ref_t, so the "possessed" bit is unavailable. We also don't do the permission check for the "requestor keyring", to continue to support the use case described by commit 8bbf4976 ("KEYS: Alter use of key instantiation link-to-keyring argument") where /sbin/request-key recursively calls request_key() to add keys to the original requestor's destination keyring. (I don't know of any users who actually do that, though...) Fixes: 3e30148c ("[PATCH] Keys: Make request-key create an authorisation key") Signed-off-by:
-
Eric Biggers authored
commit 81a7be2c upstream. asn1_ber_decoder() was ignoring errors from actions associated with the opcodes ASN1_OP_END_SEQ_ACT, ASN1_OP_END_SET_ACT, ASN1_OP_END_SEQ_OF_ACT, and ASN1_OP_END_SET_OF_ACT. In practice, this meant the pkcs7_note_signed_info() action (since that was the only user of those opcodes). Fix it by checking for the error, just like the decoder does for actions associated with the other opcodes. This bug allowed users to leak slab memory by repeatedly trying to add a specially crafted "pkcs7_test" key (requires CONFIG_PKCS7_TEST_KEY). In theory, this bug could also be used to bypass module signature verification, by providing a PKCS#7 message that is misparsed such that a signature's ->authattrs do not contain its ->msgdigest. But it doesn't seem practical in normal cases, due to restrictions on the format of the ->authattrs. Fixes: 42d5ec27 ("X.509: Add an ASN.1 decoder") Signed-off-by:
-
Eric Biggers authored
commit e0058f3a upstream. In asn1_ber_decoder(), indefinitely-sized ASN.1 items were being passed to the action functions before their lengths had been computed, using the bogus length of 0x80 (ASN1_INDEFINITE_LENGTH). This resulted in reading data past the end of the input buffer, when given a specially crafted message. Fix it by rearranging the code so that the indefinite length is resolved before the action is called. This bug was originally found by fuzzing the X.509 parser in userspace using libFuzzer from the LLVM project. KASAN report (cleaned up slightly): BUG: KASAN: slab-out-of-bounds in memcpy ./include/linux/string.h:341 [inline] BUG: KASAN: slab-out-of-bounds in x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366 Read of size 128 at addr ffff880035dd9eaf by task keyctl/195 CPU: 1 PID: 195 Comm: keyctl Not tainted 4.14.0-09238-g1d3b78bb #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0xd1/0x175 lib/dump_stack.c:53 print_address_description+0x78/0x260 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x23f/0x350 mm/kasan/report.c:409 memcpy+0x1f/0x50 mm/kasan/kasan.c:302 memcpy ./include/linux/string.h:341 [inline] x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366 asn1_ber_decoder+0xb4a/0x1fd0 lib/asn1_decoder.c:447 x509_cert_parse+0x1c7/0x620 crypto/asymmetric_keys/x509_cert_parser.c:89 x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174 asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388 key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850 SYSC_add_key security/keys/keyctl.c:122 [inline] SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0x96 Allocated by task 195: __do_kmalloc_node mm/slab.c:3675 [inline] __kmalloc_node+0x47/0x60 mm/slab.c:3682 kvmalloc ./include/linux/mm.h:540 [inline] SYSC_add_key security/keys/keyctl.c:104 [inline] SyS_add_key+0x19e/0x290 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0x96 Fixes: 42d5ec27 ("X.509: Add an ASN.1 decoder") Reported-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
-
Pan Bian authored
commit 89c5a2d3 upstream. The remapping result of memremap() should be freed with memunmap(), not kfree(). Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20171206095010.24170-3-ard.biesheuvel@linaro.orgSigned-off-by:
-
Greg Kroah-Hartman authored
commit af97a77b upstream. Thanks to the scripts/leaking_addresses.pl script, it was found that some EFI values should not be readable by non-root users. So make them root-only, and to do that, add a __ATTR_RO_MODE() macro to make this easier, and use it in other places at the same time. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Tested-by:
Dave Young <dyoung@redhat.com> Signed-off-by:
-
Huacai Chen authored
commit c2e8fbf9 upstream. The rps_resp buffer in ata_device is a DMA target, but it isn't explicitly cacheline aligned. Due to this, adjacent fields can be overwritten with stale data from memory on non-coherent architectures. As a result, the kernel is sometimes unable to communicate with an SATA device behind a SAS expander. Fix this by ensuring that the rps_resp buffer is cacheline aligned. This issue is similar to that fixed by Commit 84bda12a ("libata: align ap->sector_buf") and Commit 4ee34ea3 ("libata: Align ata_device's id on a cacheline"). Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Huacai Chen authored
commit 90addc6b upstream. In non-coherent DMA mode, kernel uses cache flushing operations to maintain I/O coherency, so scsi's block queue should be aligned to the value returned by dma_get_cache_alignment(). Otherwise, If a DMA buffer and a kernel structure share a same cache line, and if the kernel structure has dirty data, cache_invalidate (no writeback) will cause data corruption. Signed-off-by:
-
Christoph Hellwig authored
commit 860dd442 upstream. Provide the dummy version of dma_get_cache_alignment that always returns 1 even if CONFIG_HAS_DMA is not set, so that drivers and subsystems can use it without ifdefs. Signed-off-by:
-
William Breathitt Gray authored
commit 5a244727 upstream. The isa_driver structure for an isa_bus device is stored in the device platform_data member of the respective device structure. This platform_data member may be reset to NULL if isa_driver match callback for the device fails, indicating a device unsupported by the ISA driver. This patch fixes a possible NULL pointer dereference if one of the isa_driver callbacks to attempted for an unsupported device. This error should not occur in practice since ISA devices are typically manually configured and loaded by the users, but we may as well prevent this error from popping up for the 0day testers. Fixes: a5117ba7 ("[PATCH] Driver model: add ISA bus") Signed-off-by:
William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by:
-
Paul Meyer authored
commit 297d6b6e upstream. While reading in more than one block (50) of KVP records, the allocation goes per block, but the reads used the total number of allocated records (without resetting the pointer/stream). This causes the records buffer to overrun when the refresh reads more than one block over the previous capacity (e.g. reading more than 100 KVP records whereas the in-memory database was empty before). Fix this by reading the correct number of KVP records from file each time. Signed-off-by:
Paul Meyer <Paul.Meyer@microsoft.com> Signed-off-by:
Long Li <longli@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
weiping zhang authored
commit e60ea67b upstream. index can be reused by other virtio device. Signed-off-by:
weiping zhang <zhangweiping@didichuxing.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Martin Kelly authored
commit 12147edc upstream. In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by:
Martin Kelly <mkelly@xevo.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Martin Kelly authored
commit 7a31ced3 upstream. In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by:
-
Martin Kelly authored
commit bd352e1a upstream. In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by:
-
Martin Kelly authored
commit 6aa8d594 upstream. In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by:
-
Jimmy Assarsson authored
commit 8bd13bd5 upstream. Avoid flooding the kernel log with "Formate error", if incomplete message are received. Signed-off-by:
Jimmy Assarsson <jimmyassarsson@gmail.com> Signed-off-by:
-
Jimmy Assarsson authored
commit e84f44eb upstream. The conditon in the while-loop becomes true when actual_length is less than 2 (MSG_HEADER_LEN). In best case we end up with a former, already dispatched msg, that got msg->len greater than actual_length. This will result in a "Format error" error printout. Problem seen when unplugging a Kvaser USB device connected to a vbox guest. warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by:
-
Jimmy Assarsson authored
commit 435019b4 upstream. The allocated buffer was not freed if usb_submit_urb() failed. Signed-off-by:
-
Oliver Stäbler authored
commit f6c23b17 upstream. After commit d75b1ade ("net: less interrupt masking in NAPI") napi repoll is done only when work_done == budget. So we need to return budget if there are still packets to receive. Signed-off-by:
Oliver Stäbler <oliver.staebler@bytesatwork.ch> Signed-off-by:
-
Yoshihiro Shimoda authored
commit a58204ab upstream. This controller on R-Car Gen3 has 6 pipes that included PIPE 0 for control actually. But, the datasheet has error in writing as it has 31 pipes. (However, the previous code defined 30 pipes wrongly...) Anyway, this patch fixes it. Fixes: 746bfe63 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
- 09 Dec, 2017 6 commits
-
-
Greg Kroah-Hartman authored
-
Vitaly Kuznetsov authored
commit d86b5672 upstream. Unavoidable crashes in netfront_resume() and netback_changed() after a previous fail in talk_to_netback() (e.g. when we fail to read MAC from xenstore) were discovered. The failure path in talk_to_netback() does unregister/free for netdev but we don't reset drvdata and we try accessing it after resume. Fix the bug by removing the whole xen device completely with device_unregister(), this guarantees we won't have any calls into netfront after a failure. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Colin Ian King authored
commit 1d5a3158 upstream. The variable temp is incorrectly being updated, instead it should be offset otherwise the loop just reads the same capability value and loops forever. Thanks to Alan Stern for pointing out the correct fix to my original fix. Fix also cleans up clang warning: drivers/usb/host/ehci-dbg.c:840:4: warning: Value stored to 'temp' is never read Fixes: d49d4317 ("USB: misc ehci updates") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Oliver Neukum authored
commit 446f666d upstream. USBDEVFS_URB_ISO_ASAP must be accepted only for ISO endpoints. Improve sanity checking. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Oliver Neukum <oneukum@suse.com> Acked-by:
-
Dan Carpenter authored
commit 57999d11 upstream. There used to be an integer overflow check in proc_do_submiturb() but we removed it. It turns out that it's still required. The uurb->buffer_length variable is a signed integer and it's controlled by the user. It can lead to an integer overflow when we do: num_sgs = DIV_ROUND_UP(uurb->buffer_length, USB_SG_SIZE); If we strip away the macro then that line looks like this: num_sgs = (uurb->buffer_length + USB_SG_SIZE - 1) / USB_SG_SIZE; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ It's the first addition which can overflow. Fixes: 1129d270 ("USB: Increase usbfs transfer limit") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Mateusz Berezecki authored
commit 1129d270 upstream. Promote a variable keeping track of USB transfer memory usage to a wider data type and allow for higher bandwidth transfers from a large number of USB devices connected to a single host. Signed-off-by:
Mateusz Berezecki <mateuszb@fastmail.fm> Signed-off-by:
-
